Can Import But can not see table data ?
Hi guru's,
I am able to import tables , but unable to Viewdata in the table OBIEE showing the message TNS could not resolve connect identifier Specified ..
I can connect to oracle databse through my Sql developer with same tnsnames.ora file parameters..
Let me know if iam not clear !!
thanks.
hi user,
This would solve your problem http://rnm1978.wordpress.com/2009/10/22/troubleshooting-obiee-and-ora-12154-tnscould-not-resolve-the-connect-identifier/
hope answers your question.promptly award points.
Cheers,
KK
Similar Messages
-
Why in SE16 we can not see New Data Table for standard DSO
Hi,
We says that there is three tables (New Data Table, Active Data Table and Change Log Table) of Standard DSO, Then Why in SE16 we can not see New Data Table of Standard DSO.
Regards,
SushantHi Sushant,
It is possible to see the 3 DSO tables data in through SE16. May be you do not have authorization to see data through SE16.
Sankar Kumar -
Final user's can not see the data due to limited authorization.
We have created a InfoSet with three info Objects, 0Account, 0Costcenter and 0COMP_CODE. 0Costcenter have an attribute retail location 0RT_LOCATIO.
0RT_LOCATIO is an authorization relevant object. We as consultants can execute the infoset properly, but final user's with limited authorizations can not see the data because of authorization failier
We hae several options to solve the issue, deleselect the auth. flag in the infoobject; delete the infoobject from the attributes of the cost center or create an authorization object and assign it to the final user's profile. But we don't want to go that way.
My question is, is there any way to avoid including this attribute in the infoset definition? We are not using it in the query and we don't need it, so if we could delete it from the infoset (in the same way you add or delete infoobjects from an Infocube) without changing the cost center aster data, we will have our problem solved.
Does anyone how to do this (if possible)?
Thanks in advance!Just do two things to find the authorization check failed for that user.
1. Execute SU53 output and find out the authoirzation check failed. If yes, please send that to BASIS Team.
2. Next one, switch on the authorization trace in ST01 and ask that user to see that data. if the user is failed with authorization issue. switch off the trace in ST01 and find out the issue.
Do this way, if it is not successful you can go for any other alternate way.
Hope this would help you. -
Can not see the data in the grid
Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
RegardsHi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady -
Can not see any Data in OKE.OKE_K_FUND_ALLOCATIONS
I am looking in this table with SQLPlus and TOAD and can not see any rows.
Hi Hussein;
First I ran:
select fu.user_name, fr.responsibility_name
, fu.user_id, fr.responsibility_id resp_id
, furg.responsibility_application_id resp_appl_id, furg.security_group_id sec_group_id
from apps.fnd_user_resp_groups furg
, apps.fnd_user fu
, apps.fnd_responsibility_vl fr
where furg.user_id = fu.user_id
and upper(fu.user_name) = upper('&User_Name')
and furg.responsibility_id = fr.responsibility_id
order by 1, 3
Passing in SYSADMIN
Taking this row:
SYSADMIN,General Ledger Super User,0,20434,101,0
I ran:
I ran exec fnd_global.APPS_INITIALIZE (0,20434,101,0);
I still get no rows returned.
Is thier a way in the App to ensure the SYSADMIN,General Ledger Super User can see this data? Or am I missing something else? -
Data blocks in forms 6i, can not see the data
i have built an application in forms with some data blocks. the blocks a connect to some tables in the db. i have built them connectd as "system". but when i run the applicatio as user x i can do select, insert, update, delete, but i can not se the records in the datablocks (they are empty), but i can do all transactios. why?
First of all, developing from the System schema is not a good idea.
Who owns the tables your form is connecting to? The table owner should create a public synonym for each table name, and also needs to grant user x access to the table. -
Can not see historical data in Time Machine backup
Hi folks
First my setup:
MBP Late2012
Samsung Evo 840 SSD
external USB 3.0 1TB as TimeMachine HD
Mac OS X Mavericks
Now my problem.
After updating to Mavericks I've made a full backup with Time Machine.
Then I swapped the former 500TB HDD to the Samsung Evo 840 500TB.
A clean setup of Mavericks follows.
After that I restored the Backup from Time Machine.
Everything ok. Til now.
Because everthing works fine in the past, I did not control the Time Machine.
Today I wanna restore a File from my "Pictures" folder.
So I opened Time Machine.
Oops.
There I can only see the latest run.
Also in the timeline on the right side the only entries are TODAY and NOW.
I can not scroll into the past.
All windows behind the current window have a black titlebar.
In Mountain lion the titlebars are grey if there is data available
and the title contains the date of the backup.
What is the problem?
Is there a bug?
Did I something wrong?
Thanx in adv.
StoikerHi masong517
What a treasure trove of hints and solutions.
I didn't know this page.
But you are right with "E2".
This solved my problem.
Thank you very much. -
Can't see table data from Visual Studio Express 2013 for Web
Hello!
I have a problem and I can't see neither the table data nor the table definition for my database inside Visual Studio Express 2013 for Web, Server Explorer. When I right click it just says refresh, copy or properies.
Does anyone know what's wrong?
Thanks a lot!Hi J1m,
According to your description, I make a test on my computer and I am able to reproduce your issue. Firstly, I install the Visual Studio 2013 express for web successfully, create a project and connect to SQL Server database. Then I right click one table,
and I can see all the options including ‘Show Table Data ’, ‘Open Table Definition ’, ‘Copy’, ‘Refresh’, and ‘Properties’. Next, I uninstall the SQL Server data tools, and restart the Visual Studio, right click on table, and only find the three options
‘Copy’, ‘Refresh’, ‘Properties’ as the following screenshot, which is the same scenario with yours.
Based on my test, the issue could be due to the missing or corrupt SQL Server Data Tools. To work around the issue, you should install the latest SQL Server data tools for Visual Studio 2013. You could download the
ISO file for SQL Server data tools and extract the ISO files to your hard drive following the methods in this
article, and install the data tools. Please restart your computer after you complete the installation.
Regards,
Michelle Li -
Other user can not see the data from the workbook
Hi Friends,
I created a workbook with some worksheets in a Business area. The owner of the workbook has no problem to view all the worksheets and get all the data returned.. I granted all the neccessary privileges to other users ,they could see the workbook, but no data returnd for the query results. Tried refresh the worksheet, same no data retrieved.Checked the SQL inspector and the plan, it showed the correct paths and execution plan without any errors there. The same query run in SQL plus by other users returned data correctly.
By the way, I had a summary folder in the workbook. During the troubleshooting, I dropped this summary folder, still the same no data return for other users.
Any body happen to know the cause or has some ideas on this issue?
The discoverer administrator verson is 9.0.4.00 and the PLUS /Viewer is 9.04.45.02.
Thank you very much,
J.KHi All
The scheduling of reports, as you have probably noticed, requires that the scheduling privilege within Discoverer Administrator tool be granted to the user NOT to a role. Scheduling will not work if you attempt this. The reason for this is that these two SYS grants must go to a user:
GRANT SELECT ON SYS.V_$PARAMETER
GRANT EXECUTE ON SYS.DBMS_JOB
The user will also need to have these grants:
CREATE PROCEDURE,
CREATE TABLE,
CREATE VIEW,
EXECUTE ANY PROCEDURE,
UNLIMITED TABLESPACE on user's tablespace
My new Discoverer 10g Handbook, which I would recommend to anyone working with Discoverer, explains scheduling in detail and even tells you how the tables and views that are used to store the results work. You won't find this information anywhere else, as you will see if you read some of the five reviews that have been left on Amazon.com. For more information about the book please look here:
http://learndiscoverer.com/books/books.htm
The PUBLIC grants are not having any impact. All these do is ensure that ALL users have the same basic privileges. You can just as easily grant these to any role of your choosing and it will work just fine.
By the way, because the PUBLIC role is the MINIMUM privileges that a user can have you might want to consider reducing the end user Discoverer privileges afforded to PUBLIC. By default, all users can Create and Edit workbooks, share workbooks, save workbooks and so on. This is far too rich a set of privileges for the basic user, who in most cases will be a VIEWER user. Whenever I create a new EUL I always recommend that my client reduces the PUBLIC user's privileges and then create new roles for more advanced VIEWER and PLUS users, adding privileges as required.
Thus, my basic VIEWER, aka PUBLIC, has only these privileges:
Collect Query Statistics
Item Drill
Drill Out
My advanced VIEWER has this additional privilege:
Save Workbooks to Database
My basic PLUS user has all of the above, plus these (pardon the pun):
Create/Edit Query
Create Link
and my advanced PLUS users get everything, which means they now get these as well:
Grant Workbook
Schedule Workbooks
I also remove the Save / Save As Actions link from Viewer which prevents the basic VIEWER users from knowing that it is there. In essence, because these users no longer can click the Save link and because they do not have the Save to Database privilege, they will not be prompted to save within Viewer no matter what they do. This now makes 10.1.2 Viewer work the same way as previous versions.
Even though the Save link is not there, my advanced Viewer users will be prompted to save if they have made any changes. This therefore allows you to have two classes of Viewer, one who can save and one that cannot.
I hope this helps
Regards
Micahael Armstrong-Smith -
Can not see records after was given select on table
Hello,
I have a database 10gV2 and I 'grant select on table1 to user1'. When user1 logged on, he can not see any data from table1. He can desc table1 but when doing a select count(*) from user99.table1 , a zero record returned. Or select * from user99.table1, nothing is returned, no records. Why?possibly there is a vpd policy on the table which applies a where predicate allowing the user only to see rows relevent to his session.
or rows inserted are not committed therefore only visible in the session where transaction is active.
A -
Help. I downloaded the OS lion. Then I imported some photos with the "iPhoto". But I see only the photos in the "last import" but I can not see in the library or photos of events, although they are marked as a number.
bioetico wrote:
I understand the problem, why is the date before which the photos.
LN -
Question: Trying to add a emjoi from special characters to my document which has tables. when adding can not see the emjoi picture. Can anyone help. Thank you
Emoji is not supported by the iWork apps.
Send Feedback to Apple via the Pages menu.
Jerry -
Can not insert/update data from table which is created from view
Hi all
I'm using Oracle database 11g
I've created table from view as the following command:
Create table table_new as select * from View_Old
I can insert/update data into table_new by command line.
But I can not Insert/update data of table_new by SI Oject Browser tool or Oracle SQL Developer tool .(read only)
Anybody tell me, what's happend? cause?
Thankyou
thiensu
Edited by: user8248216 on May 5, 2011 8:54 PM
Edited by: user8248216 on May 5, 2011 8:55 PMI can insert/update data into table_new by command line.
But I can not Insert/update data of table_new by SI Oject Browser tool or Oracle SQL Developer tool .(read only)so what is wrong with the GUI tools & why posting to DATABASE forum when that works OK? -
Adding new field to data source -can not see them
Experts,
I have added 4 fields to the data source 0FI_AA_11 .
I can able to see these fields in the append structure or in RSA2,but i can not able to see in RSA6.I reactivated append structure ,still i can not see these fields in RSA6.
Please advice me how can i see them in RSA6.Hi Manoj,
Have a look, similar post:
Re: not able to see new fields in datasource
Hope it Helps
Srini -
Is there a mobile phone that can sync with ical, but does not require a data plan?
Is there a mobile phone that can sync with ical, but does not require a data plan?
Thanks for the reply. I already have this info, but have spent several hours trying to cross reference with the product descriptions and the different carriers websites. I was hoping there was an easier way.
John Maisey wrote:
Hi,
You cakn sync many phones using iSync. See here: http://support.apple.com/kb/ht2824
Best wishes
John M
Maybe you are looking for
-
??
-
I have problem with bootcamp in macbook pro retina late 2012
When I try to create the disk partition, I get a message saying it can not create the disk partition, well in a similar words but in spanish, sorry for my bad translation
-
I just wanted to sign in under my old id once to download past purchases then return to my primary id where I have some complete tv seasons I don't want to lose access to as they become available. When I tried, it warned me that I would be unable to
-
N95 V12 firmware withdrawn?
Has V12 firmware been removed from the Nokia update site. Tried updating my N95 this evening and was only offered the same V11 that I already have to reinstall.
-
Hello Friends, I am new to Labview. And now I am working on a project where I have to measure the pulse width. I have attached a pulse waveform and would like to measure the pulse width of the first rising the falling edge and log it , rest of the si