Can Indesign CS5 convert files for use on Kindle?

Hello,
Have any of you converted books for use on Kindle, and if so, how did you do it, and did it go smoothly? Please explain in "dummies" terms, as I find this topic to be very confusing.
If I convert files to ePub format in Ind. CS5, is this all I need to do to convert it to a format that can be used on a Kindle reader? Would this work for graphics as well as text?
Internet searches about this gave info for an older version, CS4, and seemed to require using supplemental software to successfully convert to Kindle format.
Thanks for any advice.
L

Yes, going to EPUB and then Kindle seems to be the best route.
A few suggestions.
1.       Upgrade to CS6. EPUB capabilities have been dramatically improved.
2.       Buy some good books EPUB. I suggest these two Liz Castro’s books for a start: http://amzn.to/LI9Q5b and http://amzn.to/LIa38o
3.       Visit Liz’s blog: http://www.pigsgourdsandwikis.com/
4.       Check out Ann Marie Concepcion’s excellent Lynda.com titles. This link will get you a one week trial: http://bit.ly/fcGpiI
Finally, you need to get at least a beginner’s grasp of HTML and CSS. Without that, quite frankly, you’re screwed.
Bob

Similar Messages

How to convert files for use in iMovie?

I have ripped some home movie footage from DVD using mactheripper to my harddrive.
Coolio.
Now, how on earth to i get the files into iMovie?
I'm guessing I need to convert the files somehow but how? Using what?
Please tell me the procedure, thanks, R

... am a mac newbie and...
.. then, you shouldn't stroll around in the outer rims of the iNet, looking for MTR.. , this app is mostly intended for distracting copy protection from commercial dvds...
give that app a try:
DVDxDV (free trial, 25$, Pro: 90$)
legal, handy, very Mac-like in usage... plus a free trial, you can test, how it works for you....
just to mention that:
DVD uses a plyback-format, end-of-the-road, delivery standard.. not meant for further processing.. you will recognize a (dramatic) loss in pic quality..

Can an InDesign page be saved as a jpg file for use in Photoshop CS5 ?

Can an InDesign page be saved as a jpg file for use in Photoshop CS5 ?

mckayk_777 wrote:
Just wondering peter what you think, instead of output to pdf you copy and then create create new file in photoshop and paste into that file. Is that sort of the same thing?
Seems to be ok especially if you enlarge the object before you copy it into photoshop.
I think what you are pasting (never bothered to try this) is just the screen preview, hence the need to enlarge. Why would you waste your time doing that instead of exporting to a high-res PDF?
If you want only part of the page, check out http://indesignsecrets.com/free-layout-zones-add-on-is-incredible-productivity-tool.php

Could someone please recommend the best program to convert AVI and MPEG files for use (and exporting) into IMovie 11?

Hi - I understand I need to convert AVI and MPEG files for use within IMovie 11. I have one particular file that has a watermark stating "Created with Flip4Mac WMV Demo". Can someone please recommend the best program for a novice? Thanks!

Hi Susan,
It is no simpler converting vobs to mp4 than mpg (mpeg2).
There is *always* a loss of quality converting video from one lossy-compressed format to another, e.g. mpeg2 to mp4.
So, if you want to not lose any quality, then converting vobs to mpeg2 (mpg) is the thing to do (since there will be no video/audio re-compression), assuming Lr5 will accept them (sorry, but I do not know). example commands:
Mac: ffmpeg -i myvideo.vob -sameq myvideo.mpg
Win: ffmbc -i myvideo.vob -sameq myvideo.mpg
If Lr5 won't accept them, then you can convert to mp4 with minimal quality loss using a command like:
Mac: ffmpeg -i myvideo.vob -sameq myvideo.mp4
Win: ffmbc -i myvideo.vob -sameq myvideo.mp4
You may need variations of these commands depending on encoding of vob.
Note: -i means -input-file; -sameq means -same-quality, as much as possible.
ffm... is smart enough to avoid re-encoding, if possible, when -sameq is used, and makes reasonable choices for audio/video codecs based on extension of output file.
Of course, you'll need to download/install ffm... program if not already on your machine, and execute commands in a terminal or command window.
Do keep us posted please .
Cheers,
Rob

Converting M-peg 2 files for use in i-movie

What is the best (easiest and cheapest) to use programme when trying to convert M-peg 2 files for use in i-movie? I have just bought my i-mac and was assured by seller in Apple store that it would be 'really easy' to upload files from existing camcorder. How wrong he was!
Help appreciated. Thanks.

Never had to do this myself. However, if your Windows PC and the Mac have the same version of PM such as PM7.xx, then you should be okay. You'll need to sort out your fonts though as I think the Mac can open PC TrueType founts but Windows cannot handle Mac TrueType. OpenType are cross platform. Hope this helps.
Ian

Convert vob files for use in FCP X

I need to convert VOB files for use in FCP X on my macbookpro in OS X Lion (10.7.5) I use Clipwrap to convert other formats, but it does not seem to accept VOB for conversion (or if it does, I have not figured out how). In searching the web, I've come across several products that tout themselves as the best, fastest, easiest VOB to Prores converters etc., some that advertise as "free" when actually only a watermarked trial version is free. I have no idea of the actual quality of any of these (some examples are Brorsoft video converter for Mac, and Acrok HD Video Converter...), and would like some input from folks w/ experience in these things before dropping $ on the problem.
In another thread on this site I read something about MPEG Streamclip, & something about needing to separately download an MPG2 converter for it w/ Lion or Mountain Lion - the process sounded confusing and I couldn't tell if it applied to my situation or not...
Thanks in advance for any light anyone can shed.

Midnighttrain wrote:
… MPEG Streamclip, & something about needing to separately download an MPG2 converter for it w/ Lion or Mountain Lion - the process sounded confusing …
MpegStremclip is THE Swiss Army Knife, when it comes to conversion, a 100% reliable, it IS absolutely free (any download a dollar = Stefano would be a millionaire!), I dare to say it is THE most recommended 3d party tool in the editor community ....
How & why you need to install the mp2 plug-in does Signore Cinque explain in simple words on his website:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html

Back-saving Adobe CC / CS6 InDesign files for use in Adobe InDesign CS3?

I am currently running Adobe CS3 on a Macintosh computer / OS. Is it possible to back-save Adobe CC / CS6 InDesign files for use in Adobe InDesign CS3?

@kc.k – You will need InDesign CS4 for that.
CS4 is the only version, that can export/import both IDML and INX exchange formats.
And you need an exported INX file (from InDesign CS4) that can open your exported IDML file from CS6, CC or CC-2014.
Since you are still running CS3 I'd suggest you downloading a 30days version of CS4 and do the conversion:
Download Adobe CS4 and CS3 Free Trials Here (incl. After Effects) | ProDesignTools
Read the Note about downloading very well before trying !!
Uwe

Converting wmv files for use in imovie 9 for users who have pc

To convert wmv files use your pc windows movie maker. (if you have one) On your pc, open windows movie maker, get collections and get your wmv project/video, drag it into the timeline, and then save in your computer, save it as an avi file and rename it. After send file to your memory card reader, that way you can transfer that file onto your mac!! And voila! I tried to email it but file became too large so transfering it to a memory card is the easiest. This took me days to figure out, I hope I have helped someone out there.....

I don't want to use DV because these .m2t files are from an HDV camcorder and I want to preserve the aspect ratio and resolution in the files. What other "flavor" of HD would you suggest that I convert them to since (a) I can't bring the files into FCP6 or Compressor (b) I don't see any other flavors of HD to use in VisualHub.
The whole business of converting .m2t files to a FCP6 compatible format, i.e. a Quicktime format, would seem to be one that is commonly encountered, and yet I have never found a thread on this forum that really answers this question: What is the best workflow for converting .m2t files for use in FCP? Surely, one of the pros who frequent this forum must have dealt with this issue and have an answer.
I don't want to have to recapture the files from tape all over again just to use them in FCP6.
Tom

___ How do I convert an Ai logo to a .dst file for use in embroidery?

___ How do I convert an Ai logo to a .dst file for use in embroidery?
Is there an easy way?
Thanks,
Hugh

Like so perhaps:
http://www.embroideryi2.com/adobe
Took 5 seconds to search on Google.
Mylenium

How do you convert .AVI files for using in iMovie without losing the original clip time and date

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

Converting VOB Files For use in FCP

Hello,
I have a large FCP project using VOB files shot on a DVD Recorder.
I have been been using a freeware called MPEG Streamclip to convert them into Quicktime Files for use with FCP7. The resulting QT files have all been very choppy when used in the FCP Timeline etc.
I have options with this freeware to convert to MPEG, TS or export to Quicktime, DV, AVI, MPEG4 or other formats.
Any suggestions on how to bring these VOB files into Final Cut Pro so that they work well.
Thanks,
Marc

Nick's tutorial is good. Read it.
I had been using Cinematize for this but would always have trouble with the aspect ratio.
With MPEG Streamclip I have no problems if I do it this way:
Export to QuickTime
Change Compression to: Apple DV/DVCPro-NTSC
Quality: 100%
Frame Size: 720x480 (DV-NTSC)
Sound: Uncompressed (the default)
Make Movie
I do a preset of the above.
Now, when you take that resultant file into FCP:
In FCP make sure your sequence set-up is DV anamorphic (if footage is anamorphic/16:9). When you bring that file into FCP it will not be flagged as anamorphic. In the browser scroll over and check mark it as anamorphic. NOW drag into the timeline. Aspect ratio is good if you do it this way.
Sharon

I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

FCE only used AIC for HD.
Al

Problem exporting FXG file for use in Flash

I have a simple rectangle with a 3D-bevel effect built in Illustrator that I need to export as an FXG file for use in Flash.
When I export from Illustrator to an FXG format, it creates bitmaps and embeds those in the FXG file.
if i import directly into Flash CS5 there are transparent gaps (and the symbols created are very complex), and it warns me that the objects aren't compatible with flash and they should be converted to bitmaps first.
Is there a way to export the object to an FXG file and keep it in a vector format?
if not, and this may be an Illustrator question, is there a way to create the same kind of effect so that I can get an end FXG object that will work in Flash?
An example of what I am seeing is posted here: http://idg-partners.com/flash_issue.html
Thanks in advance.

Is there a way to export the object to an FXG file and keep it in a vector format?
Create the bevel edges as separate objects with gradient fills. not sure why you need AI, though. You can do that jsut the same directly in Flash...
Mylenium

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

Indesign cs5 32 bit for available?

indesign cs5 32 bit for available?

Do you already have a license, or are you trying to upgrade, or find a new full license?
CS5 is no longer distributed, but there are ways to get the trial version which can be activated with your exisiting serial number. Other than that you're looking at purchasing through a non-authorized supply chain and you may or may not get something you can use.

Can Indesign CS5 convert files for use on Kindle?

Similar Messages

Maybe you are looking for