Can Install & Configure Forms & Reports 11g on Windows XP SP2 (32-bit)

Hi All;
can install & configure forms & reports 11g on windows xp sp2 (32-bit)
regards

Yes, Oracle Fusion Middleware (Forms/Reports) 11g is certified for Windows XP. Check out Oracle Fustion Middleware Supported System Configuations for more information.
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Similar Messages

Installing Oracle Fusion Middleware (Forms/Reports) 11g on windows 2012 x64

Hi All,
I'm planning to install oracle fusion middleware 11g (forms/reports) on windows 2012 64 bit.
Once i started the installation of weblog server 10.3.6 it went fine without any error at this stage.
In second stage i tried to configure it, but in the configuration process "*Creating Domain*" is getting failed.
Placed some sample message below from the log file.
[2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000KOYojYVCWr^pxSP5iW1JVQQa000000,0] Setting valueOf(CREATE_DOMAIN) to:false. Value obtained from:USER
[2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000KOYojYVCWr^pxSP5iW1JVQQa000000,0] Setting valueOf(EXTEND_DOMAIN) to:false. Value obtained from:USER
[2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000KOYojYVCWr^pxSP5iW1JVQQa000000,0] Setting valueOf(EXPAND_CLUSTER) to:false. Value obtained from:USER
[2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid:
[ecid: 0000KOYolfhCWr^pxSP5iW1JVQQa000003,0] Adding Element:CREATE_DOMAIN_ID for writing.
Any help in the regard will be greatly appreciated.
Thanks
Syed

Hi,
1)As per certification matrix Forms and Reports 11.1.1.7.0 is supported on Windows 2012.
   So in order to install Forms and Reports you need to first install the Forms and Reports software binaries then need to run the config.sh command from %ORACLE_HOME%/bin.
   No need to create any domain using the config.sh from Weblogic home.
2)Please see if the below prerequisites were met :-
   . Assign Proper ip, hostname & domain name
. Entry of ip, host name & domain name in etc/hosts file
. Disable anti-virus if any
. Disable ipv6, a
. Disable Windows Firewall, Windows Update & Windows Management Instrumentation at Service level (services.msc)
. Create 2 folder "tmp" & "Java" for temp, jdk & jre installation. And set the path of installed jdk in Environment Variable
Regards,
Prakash.

Install oracle forms / report 11g

I am try to install Oracle Forms and Reports 11gR2 (11.1.2.1.0)
I wish to know with version of weblogic server
i must install to be work with this version of Forms / Report
Work with
WebLogic Server 11gR1 (10.3.6) + Coherence + OEPE - Package ???
Thank you

Hi
please reference to certificate matrix as the following :
http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-11gr2certmatrix-519680.xls

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

Can on one domain coexist managed servers for ADF11g and Forms&Reports 11g

Is it possible on one Weblogic Domain to exist both Managed server for ADF 11g and Managed servers for Forms 11g and Reports 11g?
How to install on one Weblogic server these two things? Is it possible and what is recommended in this case?
Thnx in advance!

Hi Rade,
Yes, i think it is possible. In my case I have one Weblogic Server Domain with 3 Managed Server,one for deploy application and the others are the Forms & Reports 11g.
For that you have to install Fusion Middlware 11g.
For ADF 11g i think you have to install Oracle Fusion Application.
Edit:
Please read the note: Installing ADF 11.1.1.3 Runtime into WebLogic 11gR1 Patchset 2 (10.3.3) [ID 1094153.1]
Hope this help
Regards
Edited by: scapy on 6/Out/2011 3:14

Install Portal, Forms, Reports, Discoverer on weblogic

I have weblogic 10.3.4 installed and configured. I am trying to install Portal, Forms, Reports, Discoverer on top of weblogic so I can host my (fmb and fmx ) oracle forms and reports based apps.... i downloaded 11.1.1.2 Portal, Forms, Reports and Discoverer... but when I try to runInstaller it bombs and I get an error /PFRD : not found....
Edited by: user9021545 on Sep 14, 2011 5:51 PM

Just unzip all the zips to the same directory, then you can something like:
Directory
- Disk1
- Disk2
- Disk3
- Disk4
In Disk1 the runInstaller is present and can be run
After the installation you can do the same for the patchset
PatchSet11.1.1.*
- Disk1
- Disk2
- Disk3
Disk1 contains the runInstaller
You need to perform four steps:
- Install the WebLogic 10.3.4 software
- Install the Fusion Middleware 11.1.1.2 Portal,Forms,Reports,Discoverer software
- Install the FMW 11.1.1.4 Patchset for Portal,Forms,Reports,Discoverer
- Configure a Fusion Middleware instance (the configuration steps are presented here: Re: 10gAS to 11g - Do I have this correct?

Install Oracle Forms 10g R2 in Windows 7

Hi,
does anyone has ever succeeded to install Oracle Form 10g R2 in Windows 7 Home Premium?
How to overcome the Jinit issue in there? Friend of mine suggested we can download the Jinit for Vista version and replace the current Jinit with it.
Do I need to change anything too in Formsweb.cfg? Windows 7 works with IE 8.
Is the Forms can work with Oracle 11g R1 client 64 bit for Windows?
thanks in advance.

Why bother with JInit? It's long desupported. Just replace it with the latest Java Plugin, and you'll be fine.

Starting Oracle Reports 11g in Windows 7

Hi there,
Does anyone have any luck running Oracle Reports 11g in Windows 7?
I installed WLS server (10.3.2) successfully.
I installed OFM (11.1.1.2) successfully.
Started Oracle Forms 11g successfully. Able to connect to Oracle database and created a form.
Registry: /SOFTWARE/ORACLE/KEY_OH2004471243: ORACLE_HOME=C:\Oracle\OFM11g\as_1
System variables: PATH=C:\Oracle\OFM11g\as_1\jdk\bin;C:\Oracle\OFM11g\as_1\jdk\jre\bin;C:\Oracle\OFM11g\as_1\bin;%PATH%
tnsnames.ora is in C:\oracle\TNSAdmin\
Error starting Oracle Reports 11g
C:\oracle\OFM11g\asinst_1\config\reports\bin\rwbuilder.bat
java.lang.NoClassDefFoundError: oracle/xml/parser/v2/XMLParseException
rwbuilder.bat file:
@REM
@REM Copyright (c) 1999, 2008, Oracle and/or its affiliates.
@REM All rights reserved.
@REM
@echo off
@echo Starting Reports 11g Builder...
setlocal
call C:\oracle\OFM11g\asinst_1\config\reports\bin\reports.bat
@echo on
start C:\oracle\OFM11g\as_1\bin\rwbuilder.exe %*
@echo off
endlocal
@echo on

Problem fixed. It was a folder security with Windows 7. When setting folder security on the root folder, it did not cascade to all the subfolders, even checked off the "Replace all child object permissions with inheritable permissions from this object". After searching many folders, the "oracle_common" folder was access is denied. Granted permission to this folder, and able to start Oracle Reports with no errors (without to run as Admin).

Installing Oracle Forms Reports 1112 throws OutOfMemoryException: PermSpace

Installing Oracle Forms Reports 11.1.2 on Windows 2008 64bit throes OutOfMemoryException: PermSpace when running the ASInstance configuration. I tried to configure the JAVA_OPTIONS variable to increase the MaxPermSize parameter but is not working.
Regards,
Néstor Boscán

The server has 16GB of memory and this is a new installation. I tried to configure JAVA_OPTIONS=-XX:MaxPermSize=512m and JAVA_OPTIONS=-XX:MaxPermSize=1024m but it didn't work.

May i can't have Forms+Reports server on the same machine ?

Gurus!
I have installed Forms+Reports server on the same machine with their builders too. But then Forms & Reports server does not function when i call my .fmx file in browser the message,
"Java applet loading" appears but then the process hang up.
But when only installed Form server my .fmx file works.I also want to call my .rep files from forms.
May i can not have Forms+Reports server on the same machine?
Separately they work but not both but i require both how!
I have also seen when both installed and when i start services of both then ifweb60.exe is called two times in memory, it shows from task manager's process tab.
Please help!
Many thanks

1. Check these files to make sure you have the correct port settings for your forms: formsweb.cfg, base.htm
2. In your Windows Registry:
a. Add path for Reports Server (REPORTSxx_PATH)
b. Make sure you also have FORMSxx_PATH defined
c. Check values of your OracleFormsServer.
HKEY_LOCAL_MACHINE
SYSTEM
ControlSet001
Services
OracleFormsServer
Verify the values of Host, Mode, Pool and Port.
3. Check Metalink Note 97487.1 for additional info.
And YES, Apache, Forms, Reports and Graphics can all run in the same machine.

Problems installing OBIEE 11g on Windows Server 2008 64 bit

Hi, I'm trying to install OBIEE 11g on Windows Server 2008 64 bit (standard edition, SP2), and it's blowing up running the installer. The installer gets past the first couple of "info" screens, but blows up prior to coming to the first "real" screen with an error:
Microsoft Visual C++ Assertion Failed:
Program: ...
File: ../../../src/share/native/sun/font/t2k/t2kstrm.c
Line: 132
Expression: pos <= t->maxPos
Has anyone seen this and/or have an idea how to work around this? Note that I did do the prerequisite download / install of the 2005 Visual C++ 64 bit libraries.
Thanks,
Scott

Just to close the loop on this thread, this does indeed seem to be some sort of font / java issue on our servers. I've been completely unable to get the install to work using the GUI. However, if I run it from command line using the -silent and -response paramaters along with a proper response file, the install went perfectly. I'm going to continue working the SR with Oracle - don't want to be stuck using -silent mode when things get more complicated, but at least now I can move forward.
If anyone else has a better workaround - please let me know. "Silent" mode is workable, but difficult and time consuming.
Thanks,
Scott

OBIEE 11g On Windows 7 home- 62-Bit

Hi,
I'm planning to install 11G on Windows 7 home - 62 Bit.
Is RCU available for 62 - Bit.
Please help me in installing with steps & Pre-requisities.
Thanks for the help in advance.

BI Administrator WILL NOT RUN in Win7-64 OS. We went round and round with Oracle on this because we wanted to do the same thing. Also, Oracle will not support installing it as a 32-bit app in a 64-bit OS. Microsoft claims that any 32-bit app can be installed in Win7-64 using their emulation mode, however we could not make that work either, but without Oracle support we decided to skip it. We could not understand why Oracle would include a 32-bit app in a 64-bit download package when the doc says clearly it must run only in Windows and only in 32-bits.
Curriously, however, it DOES run in Windows 2008 Server 64 bits. Go figure.
Regards,
Ken
Edited by: Ken Frantz on Feb 11, 2011 2:43 PM

Can anyone suggest what to do for Windows 7 Ultimate-64 bit???

'Can anyone suggest what to do for Windows 7 Ultimate -64 bit after several failed attempts to install mother board driver shows "This Program might not installed correctly"??? That resulted the many of the drivers including the Graphics Driver are not working... If any link is out there in this regards please suggest as well...

Hi:
Please see this related post...
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/hp-15-r033tx/m-p/4630950/highli...

Installing Form, Reports 11g

For the Last few weeks i have been reading all the documents on the internet,
so i at last became able to
install Oracle Databse 11g
install RCU /installing Schemas, all of it,
installling weblogic 1033
using identity Managment installed OID etc
identity manager didn't gave any error
when prompted at last to Portal Forms, Reports and discoverer
just strucked at providing "Specify OID informtion" hostname,portnumber etc
identity manager summary show port number 3131,3060,password and user name are also correct,
but pressing 'next' gives me error message "Verify Credentials, Make sure hostname,port number, password are correct"?
Kindly someone,

i did it somhow,
deselecting portal and
select forms, reports only
then skip the specification screen of OID,
installed firefox 5.0.1 and jre 6u27, run test.fmb which was in forms folder,
but it do not run any other FMB it gives a TNS error?
Kindly someone,
Edited by: kashif, pakistan on Oct 3, 2011 12:37 PM

Has anybody configured Forms/Reports as cluster in 11g patch3?

Situation:
Three OEL machines (r5u5 32 bit).
Versions: WLS 10.3.3, Forms/reports 11.1.1.2 with patchset 11.1.1.3.
On the first machine I successfully installed the admin server and the first instances of the forms and reports managed servers.
On the second machine I successfully expanded the cluster from the first machine. All managed servers can be brought up and are working
Problem:
When installing the third machine, the same way as I did the second machine, the config process, remains in the state "in progress" on the step "starting managed server WLS_FORMS2" and several retries to start the managed server ... fail, ending in a failure of the installation.
Tests so far:
Hostname is underscoreless ... yes ;-)
The http and webcache are installed with it, first I did a trial with not selecting them.
Question:
It seems to me not a lot of environments are running forms in a WLS cluster and I can nowhere find info on what might be the problem. Has anybody done this kind of an environment yet (installation of forms in clustered mode) ? and/or encountered the same kind of problems ... ?

Have a look here it describes the step by step install:
http://www.formsmigration.com/wls_install.html
Then this covers the patch up to 11.1.1.3:
http://www.formsmigration.com/wls_patch_to_1033.html
You seem to be installing the weblogic server 10.3.4 and then the forms and reports 11.1.1.2. I think that this is an incompatible combination, and you need to install weblogic server 10.3.2 with that version of forms and reports. Y9ou can then patch up to newer versions afterwards.
cheers
Tony

Can Install & Configure Forms & Reports 11g on Windows XP SP2 (32-bit)

Similar Messages

Maybe you are looking for