Can ios 5.1 support SAMSUNG ml 2165w AIRPRINT?

Can ios 5.1 support SAMSUNG mono laser printer ml 2165w by using AIRPRINT?

You can use "handyprint" (www.netputing.com) to workaround it.
require to install on a desktop computer PC/MAC,
so use the PC/MAC as a portal to print.
It will simulate all printer that doesn't support airprint feature,
and when iOS device->print, you will see right the way.
You can even print-to-pdf and save it in your folder you specified.
cost: donation based, just paypal them whatever you feel its worth.
note: I am not in anyhow associate with this company.

Similar Messages

Labview Touch Panel Module can support Samsung S3C2440 cpu in wince ?

labview Touch Panel Module can support Samsung S3C2440 cpu in wince ？

Hi Mohammed,
Windows CE 6.0 is not officially supported by the Touch Panel Module (see this link for more info and what is supported). Other members on our forums (link) have tried working with CE 6.0 but since it isn't officially supported and you're still in the planning stage of your application, it might be better to choose a HMI that is directly supported.
Tim W.
Applications Engineering
National Instruments
http://www.ni.com/support

Why aperture can't support samsung NX1000

the picture of samsung NX1000 file formate is .srw, I've read the page, Aperture can support samsung NX100, why can't support NX1000 ?
can anyone help me? thanks!

Raw support is based on the camera not the file extension.
Even though the extension of the file for the 1000 is the same as for the 100 the contents of the file are different requiring the Raw converting software to be modified to support it.
regards
In the meantime make sure you let Apple know you want support for this camera. See Apple - Aperture - Feedback

HT4356 AirPrint to Samsung ML-2165W printer

Can you tell me how to print from my IPad (model MD786LL/A) to my Samsung ML-2165W printer?

I do not see it on the list of supported printers here:
http://support.apple.com/kb/HT4356
printing to a non-airprinter from an iPad
To print from the iPad, your going to have to install some more software:
-- install a printer app on the ipad. many printer makers have iPad applications for their printers. Look in the app store
-- install enabling software on a computer which you have connected the printer
For a comprehensive list of links,
   see Texas Mac Man list:
     https://discussions.apple.com/message/21291967#21291967
   or
     http://ipadhowtouseit.com/ipad-printing/
iPad Print Applications supplied by printer manufactures -- usually free:
Samsung
     http://itunes.apple.com/us/app/samsung-mobile-print/id429611283?mt=8
Helper app -- /print n share
Print directly to the widest range of network or WiFi printers available in any app. Alternatively print via your computer to ALL printers including USB & Bluetooth printers. View read and display large PDF, Office & iWork files. Easily transfer & store files from the Cloud or your computer.
https://itunes.apple.com/us/app/print-n-share/id301656026?mt=8
Generic Software:
You can connect the printer to a computer and install software on your computer to print from your ipad to the comptuer then to the printer.
Software for your computer's printer:
Enterprise level support for Mac and Windows
   Presto
    monthly subscription fee
    http://www.collobos.com/index.html
     Makes any printer AirPrint® compatible so you can print from an iPad® or iPhone®.
     Reportedly works for any router.
     http://www.netgear.com/landing/genie/default.aspx
Mac software
Printopia
   http://www.ecamm.com/mac/printopia/
handyPrint -- donationware
   http://www.netputing.com/handyprint/

Why can't I connect to samsung or htc device via Bluetooth?

Why can't I connect to samsung or htc device via Bluetooth? or can't copy any picture or song from my laptop to Iphone 5?

Because this has never been a feature of iphone/ipad/ipod touch.
Ipod touch/iphone/ipad support bluetooth for handsfree telephone devices, stereo speakers/headsets, some keyboards, some peer-to-peer apps form the app store, and internet tethering where provided by the carrrier.
Otherwise, they will not connect to another phone/device/computer.

IOS 7 icon support still not available in air 3.9

I am using Flash Builder 4.7 with Air 3.9 (with IOS 7 icon support) running on Win 8.
I have been battling to get a simple app on the Apple App Store because although the latest AIR 3.9 (with IOS 7 icon support) does not give an error when exporting the release build, when I try submitting my app (Using Application Loader on Mac OS X) it complains about missing icons.
When will this problem be resolved? Does anyone have an ETA?

You can edit the xml then compile with command line. But I am still having a few tweaking issues but it should work this way. But yes I hope we get a new build soon.....

What video file extensions can be uploaded to the samsung galaxy s lll?

I've tried uploading different videos to my S lll and none of them are working. Can someone please tell me what video files will play on the device?

Hello and thank you for your reply. The video format I was trying to upload and play was WMV, MPEG, MOV AND AVI. Any help that you can give me would be greatly appreciated. Thank you in advance.
Michael
From: Verizon Wireless Customer Support
Sent: Friday, January 11, 2013 10:09 AM
To: <Full name removed for privacy per the Verizon Wireless Terms of Service.>
Subject: Re: What video file extensions can be uploaded to the samsung galaxy s lll? - Re: What video file extensions can be uploaded to the samsung galaxy s lll?
Re: What video file extensions can be uploaded to the samsung galaxy s lll?
created by Verizon Wireless Customer Support in Samsung Galaxy S III - View the full discussion
Message was edited by: Verizon Moderator

How do I unregister my iMessage as I can't sms anyone on samsung s4 they use to have iphone

How do I unregister my iMessage as I can't sms anyone on samsung s4 they use to have iphone

Hi,
You can on the iPhone or other iOS device set the Messages app to Send as SMS if the iMessages will not go through
You can also Enable the MMS to make sure your can see replies.
It then depends, as has been said, if the person is using the same number as to whether it works to the contact details you have.
However turning Off the SMS and MMS options then the iMessages part itself will turn the Messages App off.
If you then place the iPhone in Airplane Mode, to break with the Server, for few minutes then the iPhone Number itself it "de-registered". (you have to turn Messages back On and wait for the number to Verify again if you want to use it again).
9:29 pm Thursday; March 27, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

IDSM2 on 6500-IOS inline mode support?

Hi,
I have an IDSM-2 running IPS5.1(1d) software (recently upgraded from 4.x) that is sitting on a 6500 IOS.
The IPS device manager shows gi0/7 and gi0/8 as both in Promiscuous mode. There is no option to change the mode to inline and pair them.
Is it so that IDSM-2 currently supports only Promiscuous mode?
If so, then this module is still acting as an IDS despite running IPS5.1. Isn't it? What is the advantage that I get after upgrading it from 4.x to 5.1?
-- Vasanth

There are 2 pieces to the puzzle.
There is the IDSM-2 version and what it supports, but also the Cat 6K Native IOS version and what it supports.
IDSM-2 v5.1(1d) supports
a) Promiscuous mode,
b) InLine Interface Pair mode (2 interfaces are paired for inline monitoring), and also
c) InLine Vlan Pair mode (2 vlans on a single interface are paired for inline monitoring, you will also see it called inline-on-a-stick)
But for these features to be used, the switch code must also support configuring the switch side of the IDSM-2 for each of these 3 features.
Native IOS Versions prior to 12.2(18)SXE will support only Promiscuous mode on the IDSM-2.
12.2(18)SXE and later versions will support InLine Interface Pair mode on the IDSM-2.
No Native IOS versions currently support InLine Vlan Pair mode on the IDSM-2 (a new Native IOS versions with this support is currently in development).
So to get Inline (IPS) functionality you need to be running a Native IOS version 12.2(18)SXE or later, and on the IDSM-2 run IPS versions 5.1 (or even the older 5.0).
(NOTE: Cat OS 8.5(1) does support all 3 modes of the IDSM-2. So if you are using Cat OS instead of Native IOS, then run version 8.5(1) to have access to all of the features of IPS 5.1(1) on the IDSM-2)
If you are running a Native IOS version prior to 12.2(18)SXE then the IDSM-2 can only be operated in Promiscuous mode even if 5.1(1) is loaded on the IDSM-2.
However, even in promiscuous mode the IPS 5.1(1) software does have a few advantages.
There are several engines, and engine parameters that are only supported in the 5.1 version and not the 4.0 version. So there are several signatures that are either a) not even created for 4.x sensors, or b) the 4.x signature is not as precise as the 5.x signature in the new engines.
(These new engines have proved invaluable in writing signatures to detect some of the new attacks that have come out over the past year.)
There are of course other advantages as well:
For example:
1) Risk Rating to better aid in prioritization of alerts.
2) More flexible fitlering mechanism for alerts that allows for fitlering individual actions
The 2 features above are just 2 of the new features that have been added in 5.0 and 5.1 that apply to both promiscuous and inline modes.

Ipad planed for enterprise use - how can we do online support

Our CEO plans iPads for enterprise use - our critical assumption is: How can we do online support like using teamviewer?
Teamviewer works just the other way round.
Any suggestions or better use Windows8-pads?
Argus

If being to RC the devices is a requirement, then you won't currently be able to use iOS devices. On the other hand based on past experience with Windows based devices, I'm not sure the plus of RC capability is worth the possible negatives that have plagued Windows based devices in the past. I'd do some serious suitabilitly testing before I went forward in a major way. The bottom line is general supportability by IT and usability by end users. RC, while nice, in my mind and at our organization isn't a requirement. Your CEO may feel differently.

Can I get phone support if I have registered my ILife 08?

Can I get phone support if I have registered my ILife 08?
I'm still having problems with the Imovie 08 help viewre:ssometimes it's there other times it converts back to Imovie HD!

Maybe here:
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
Also see:
https://discussions.apple.com/message/18264914#18264914

Can ios 6 be uninstalled

Can IOS 6be uninstalled?

it can be in non apple support ways. which are against terms and use to talk about on this apple forum

How to check whether a cisco device or version of IOS is in support?

I want to upgrade a 2612 due to the version of code it's running being flagged as vulnerable by our vulnerability scanning. However, I am guessing, seeing that the last version of code released for the 2612 was in 2007 that it is probably out of support? Is there anyway or anywhere on the cisco site I can visit to see if a product or version of IOS is out of support.
Does the 2612 being out of support mean that any question of a version of IOS running on it is moot? If a platform is out of support thereby any version of code running on it is out out of support also?
Thanks for any help in advance.

When a hardware product's EoS (End of Sales) announcement is made, Cisco's standard policy is that they will also include an End of Engineering date. That's usually 1-2 years after the hardware is last sold. After end-of-engineering, there will be no further software updates, even to address newly identified vulnerabilities.
End-of-support (sometimes referred to as end-of-life) is typically five years after end-of-sales. During that "twilight" period you can receive hardware replacement and TAC assistance (if you have a support contract) that may help you mitigate vulnerabilities in ways other than upgrading the code.
In any case the 2612 router is running on borrowed time. You can't put current IOS on it and you can't get Cisco support for it. It has little to no residual monetary value and should be replaced if having current code with patched vulnerabilities and support is important in your environment.

Hw can i get arabic support in oracleAS using jstl: showing '?????' symbols

Hello All,
I am using OracleAS for portal deployment and portlets UI constructed by using jstl.
i have used spring portlet jstl for the jsp pages.
when i am trying to change the language, it is showing '?????' symbols.
I have used correct unicode. i tested in pluto portal server. when i deployed in oracleAS,
for english not a problem. for arabic it is showing as '????'.
i have used this code to get arabic in pluto. same code i used. i am getting error.
<c:set target="${pageContext.response}" property="characterEncoding" value="UTF-8" />
<fmt:setLocale value="ar" />
<fmt:requestEncoding value="UTF-8" />
i know it is not setting charector encoding.
i tried some other too like:
<head>
<META http-equiv="Content-Type" content="text/html;charset=UTF-8"/>
</head>
and
<%@ page pageEncoding="UTF-8" %>
No improvement. please help me out of this.
how can i get arabic support in oracle AS by using jstl?
Thanks,
Arun

Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
Regards.

I can not longer send email from my .me email. in outlook 2010 on my PC. I can still recieve emails fine. I have not changed my settings at all. I have however tried all the settings i can find on the support pages. PLEASE HELP

I can still receive icloud ( ME email address) emails fine. I have not changed my settings at all. I have however tried all the settings I can find on the support pages. PLEASE HELP. Nothing has changed. This suddenly just started happening around a month ago. To frustrate me apple does not seem to have a support email or any method to contact them with this issue to do with their email product. I have spent ages going through the apple support sites and I keep getting asked for an apple product to mark it against. I have no apple product as I am using a PC but I am accessing and using their email product. Is there even a phone number I can call? Surely there is a support area for their Email server issues. Can anyone help? It is driving me mad and causing me major issues. My outlook is Outlook 2010 on a windows 8 PC. As I have said it worked fine then one day decided to stop sending emails.
Thanks for your help.

Hi - this problem is discussed here:
https://discussions.apple.com/thread/5375046?start=0&tstart=0

Can ios 5.1 support SAMSUNG ml 2165w AIRPRINT?

Similar Messages

Maybe you are looking for