Can iOS 7.0.2 be installed without installing iOS 7 first?

I have an iPhone 5 and I haven't installed iOS 7. Now under software update iOS 7 is gone and I only have the option of installing 7.0.2. I have searched the web for answers, but I seem to be the only one with this question. Any advice is appreciated.

Go ahead and update if you wish. 7.0.2 is the current version of the operating system.

Similar Messages

Where can high-power video cards be installed on a first-gen Mac Pro?

I have a first-gen Mac Pro with a Radeon X1900 XT in Slot-1 and a Geforce 7300 GT in Slot-4. The x1900 XT powers a 30" monitor and the 7300GT powers 2 x 20" monitors. The 7300GT card died and is being replaced with an 8800 GT.
Now it seems fairly obvious that for gaming the 8800 GT is superior to my X1900 XT. Ideally I'd like to just throw my new 8800 GT in Slot-1 and use it for my 30" monitor and then run the 2 20's off the X1900 XT in Slot-4. The problem with that is that the x1900 XT is a huge card and physically won't fit in Slot-4 because it runs in to the hard drives above it.
*Now, on to the questions / clarification:*
_Question 1_: Is the first-gen Mac Pro the same as the new Mac Pro in that high-power cards can only be used in Slot-1 and Slot-2? If so, why does it come in the standard configuration of:
Slot-1: x16
Slot-2: x1
Slot-3: x1
Slot-4: x8
It would seem that Apple purposely did this so you would run 2 high-power cards in Slot-1 and Slot-4 and keep them away from each other for heat reasons. The new Mac Pro has x16 bandwidth on Slot-1 and Slot-2 and it would make sense why they say to only install high-power cards in Slot-1 and Slot-2 for it.
_Question 2_: PCI-e configurations. There are a few ways I could tweak the configuration of the expansion slots to make this setup work. I'm curious as to which you would think is best:
*Option 1 (default PCI-e config, only works if a high-power card can be installed in slot 4):*
Slot-1: x16 - Radeon X1900 XT - 2 x 20" monitors for minor tasks / programs
Slot-2: x1
Slot-3: x1
Slot-4: x8 - GeForce 8800 GT - 30" monitor for major tasks / gaming
Now, the first issue is can the 8800 even run in Slot-4 due to the supposed power problem? If so, would there be a difference in performance for gaming at x8? I know this is backwards because you'd want the "primary" card to run on x16 but that's just not possible with this PCI-e configuration. If there is a difference in performance would an 8800 GT at x8 still run significantly faster in games than an X1900 XT a x16? I'd think so, but that's assuming the x8 isn't a real bottleneck.
*Option 2 (the only solution if the cards have to be installed in the first 2 slots):*
Slot-1: x8 - GeForce 8800 GT - 30" monitor for major tasks / gaming
Slot-2: x8 - Radeon X1900 XT - 2 x 20" monitors for minor tasks / programs
Slot-3: x4
Slot-4: x4
You still have the issue of the 8800 only running at x8 (if it even makes a difference, not sure). The benefit I see here is that instead of the X1900 XT dumping all of it's heat in to the 8800 GT (since heat rises) you have the 8800 GT on the bottom where it might run cooler. The X1900 XT would then also be limited to x8 but it's not even being used for gaming so it wouldn't matter at all. The X1900 XT is huge and would cover up Slot-3 but I don't use the other 2 slots so I don't mind.
*Option 3 (only works if Slot-3 can actually power an X1900 XT):*
Slot-1: x16 - GeForce 8800 GT - 30" monitor for major tasks / gaming
Slot-2: x1
Slot-3: x4 - Radeon X1900 XT - 2 x 20" monitors for minor tasks / programs
Slot-4: x4
This seems ideal only because this is the only setup that can get the 8800 to run at x16. The issue now is can Slot-3 run a high-power card? The card doesn't really NEED the power since it's just for running basic apps and not gaming. Again, the X1900 would cover up Slot-4 but it's not being used so no worries there.
*At the end of the day, the most important thing to figure out is:* where can high-power cards be installed in a first-gen mac pro? Once we know that we can figure out Question 2. The instructions that come with the 8800 GT say it can be installed in any of the 4 slots, but I don't know if I really believe that.
Thanks in advance for your help!

Thanks for your help, I think we've beat this horse to death :P. I'm glad I got it all figured out though.
Now the only question is if the gaming performance of the 8800 is actually enough better than the X1900 to warrant making it my "primary" video card. As long as Adobe CS3 apps don't rely on core image like some of the Apple Pro apps do I think it will be fine. If they do I'd have to probably just stick with the X1900 since I use CS3 every single day and only play video games once a week if I'm lucky.
What are your thoughts on the X1900 vs the 8800 GT for CS3?
Edit: This just occurred to me... Since I'm going to have to run them as x8, x8, x4, x4 there isn't really going to be a "primary" card since neither will be at 16x. I guess I could technically just plug my 30" monitor in to either one of them depending on what I feel like doing. If I'm going to play a game I just plug in to the 8800 and if I'm working I plug in to the 1900. The computer is up on the desk so moving the monitor from one card to the other takes about 10 seconds. I could just plug 1 20" monitor in to each so there's always a free DVI port on either one.
It's not the most elegant but I guess it would be a good compromise if I wanted the "best" performance in either situation. I realize the Radeon 3870 is probably the best of both worlds but I really don't want the noise. I already modified my 1900 with this after 6 months of listening to the lawn mower that was the stock 1900 cooler: http://www.arctic-cooling.com/vga2.php?idx=147
I'm just hoping the 8800 isn't too loud .

How can I capture video directly into FCP without recording to tape first?

I hooked my Sony VX2000 to the computer via firewire and opened the Log and Capture dialog box. The video from my camera shows correctly in the preview window.
I click the Capture Now button and the capture window opens but no video displayed. The message below the window says "Waiting for Timecode".
I guess the camera doesn't send timecode when it's not recording so I press the record button. Now video shows up in the capture window. After 16 frames it freezes and an error box pops up that says "Capture Now has reached the end of the tape. All existing footage between the point where you started the capture and the end of the tape was captured successfully."
Foiled again! This has been a problem from time to time when I want to capture video from a source that does not supply timecode.
Is there any settings I can change to capture video directly from a camera using FCP without having to record it to tape in one step and then capture it in a second step?
Thanks,
Rob:-]
FCP 5.1.2 Mac OS X (10.4.8) Dual 1.8GHz Power PC G5, 3GB ram

I thought I had tried that. Thanks, that was the answer.
I am aware of the danger of not having tape backup. Having worked with the new Panasonic AG-HVX200 it is a chore to free up the P2 cards fast enough to keep from starving the camera crew. Copying the P2 contents to a single hard drive is the practice but leaves the whole shoot at the mercy of a single point of failure.
As far as my capturing directly to HD, it isn't a problem for short podcasts that could be recreated quickly if lost. Also, I can still record to tape in the camera but avoid the second step of capture when I'm in my edit bay anyway.
Peace,
Rob:-]

HT5052 can iOS 5.1.1 be downloaded for free? Can it be downloaded without Wi Fi?

Can iOS 5.1.1 be downloaded for free and can it be downloaded without WiFi?

Welcome to Apple Communities
iOS 5.1.1 is a free download that you can do in your device (OTA) or iTunes (with a computer). Connect your phone to your computer and install iOS 5.1.1

HT4623 I can't activate Location Services after installing ios& on Iphone 5.... any ideas?

I can't activate Location Services after installing ios& on Iphone 5.... any ideas?

I had the same issue with one of the three iPhones I updated on Wednesday. There are many processes that are working for people including:
- Resetting the device several times
- Toggling the "Dont' Allow Changes" setting under "Restrictions --> Location Services"
- Disabling Restrictions altogether.
- Restoring from backup
I was able to restore location services by selecting "Reset" and choosing "Erase All Content and Settings" to set the phone up as new. When the phone resets and goes through the setup process, I was given the option to turn on location services. I then restored from backup and was good to go.
Some people have been able to resolve the issue by resetting but only using "Reset All Settings" without having to erase all content, but that did not work for me. It took a while to get everything back to normal, but it is good to know that there was a somewhat simple solution.

If I own Adobe Photoshop Elements 12 and have it installed on my computer, how can I get access to Adobe Bridge without a monthly subscription? Is there a way to use Adobe Photoshop and Bridge without paying a monthly fee?

If I own Adobe Photoshop Elements 12 and have it installed on my computer, how can I get access to Adobe Bridge without a monthly subscription? Is there a way to use Adobe Photoshop and Bridge without paying a monthly fee?

Hi Jaclyn2,
Please follow the steps mentioned in the kb: http://helpx.adobe.com/creative-suite/kb/error-update-server-repsonding-cs4.html .
Regards,
Romit Sinha

I just lost my iphone5 in a foreign country. Was not able to register it with icloud and have not installed the findmy iphone app. How can i wipe out my data remotely without these setups? Please help!

I just lost my iphone5 in a foreign country. Was not able to previously register it with icloud and have not installed the findmy iphone app. How can i wipe out my data remotely without these setups? Is there any good app i can use to track it? Please help!

No, nothing you can do to track it if you did not take any measures before the loss.

Can anyone tell me how to install a network printer driver without having the network printer online?

Can anyone tell me how to install a network printer driver without having the network printer online? It doesn't matter what manufactors make the network printers. Is a netwaork printer(with network card) has to have that printer on line to be able to install
the driver? This is the point of my question!
I've ask a same type of question previously, but I can't either get good answer nor reply on the response.

DP
The computer (and driver) have to handshake with the printer, QED it has to be either online or physically connected and if it is physically connected it wont work on the network so yes it does.
Wanikiya and Dyami--Team Zigzag

HT1651 how can i improve my macbook's performance without installing memory

how can i improve my macbook's performance without installing memory

More RAM & bigger faster Hard Drive will help, maybe a better Graphics card also, since 10.5 ises the Video much harder.
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1
Then click on More Info>Hardware>Graphics/Displays and report like this...
NVIDIA GeForce 7800GT:
Chipset Model:          GeForce 7800GT
Type:          Display
Bus:          PCI
Slot:          SLOT-1
VRAM (Total):          256 MB
Vendor:          nVIDIA (0x10de)
Device ID:          0x0092
Revision ID:          0x00a1
ROM Revision:          2152.2
Displays:
VGA Display:
Resolution:          1920 x 1080 @ 60 Hz
Depth:          32-bit Color
Core Image:          Supported
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Display:
Status:          No display connected

How can i do to get and install whatsapp messenger on my iPhone 4s updated with iOS 6?

How can i do to get and install whatsapp messenger on my iPhone 4s updated with iOS 6?

Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Then... See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

Can GarageBand 6.0.5 be installed on a computer which has GarageBand 5.1 without having to trash 5.1 and all associated folders. Meaning, will 6.0.5 write over 5.1 and replace it

Can GarageBand 6.0.5 be installed on a computer which has GarageBand 5.1 without having to trash 5.1 and all associated folders. Meaning, will 6.0.5 write over 5.1 and replace it

1212 Music wrote:
will 6.0.5 write over 5.1 and replace it
if you do nothing but install it, yes.
what you can do is control click on the application and chose the "Duplicate" option. this will create a renamed copy of GBv5, and when GBv6 replaces the original GBv5, you'll still have the renamed copy available in your Applications Folder to launch (i currently have back to version 4 available on this machine... back to 3 on another).
for v6 and lower, the instruments will stay the same (GBv10 is vastly different and does replace instruments)
SOP: if you don't have a full backup of your system, you'll lose everything at some point. as long as you do, you can at least recover from any failure such as installing new software

Can ios 5.0.1 (9A406) install on my ipad 1, (9A405) causing no sim card detectted

can ios 5.0.1 (9A406) install on my ipad 1, (9A405) causing no sim card detectted.............
HELP ME

thanks' for ur help... but it didn't work. i have tried to re-restore the software with ipsw ext. still no sim card.......... and funny, it happen since the first update 9A405 released. i updated my ipad 1 since.
now i use my ipad1 just for playing games....... can't playing internet since 2 months ago.........

After installing ios i'm can't connecting wi-fi, after installing ios i'm can't connecting wi-fi

after installing ios i'm can't connecting wi-fi, after installing ios i'm can't connecting wi-fi

Could you please be clearer, Could you please be clearer, could you please be clearer?
You cannot connect at a wi-fi hotspot, or on a secure network? Do you show any signal strength? Do you show any available networks?

My IPOD is already synced to iTunes. My friend just acquired an iPhone and he wants to purchase an app through my iTunes. Can he use my iTunes to install the app to his iPhone without screwing up my IPOD information already on my iTunes?

My IPOD is already synced to iTunes. My friend just acquired an iPhone and he wants to purchase an app through my iTunes. Can he use my iTunes to install the app to his iPhone without screwing up my IPOD information already on my iTunes? Also, how does he install ONLY that app on his iPhone without syncing my music also? I haven't done this before with just an app. Thanks.

Since you and your friend aren't married or in the same household (I assume you wouldn't have referred to this person as "my friend" otherwise), what you want to do is not permitted by the terms of use of the iTunes Store.
Your friend should create his own Apple ID. He can use your computer; just have him log into your computer with a user account you create just for him, not your own user account. Doing it that way is almost like having your friend use a different computer, since both Mac OS X and recent versions of Windows do a pretty good job of segregating the data of multiple user accounts.
He can then purchase the app using iTunes and sync it to his iPhone. When he's done, he should log out of your computer.
However, be aware that there is no reason to purchase an app using iTunes on a computer and to then sync it to the iPhone. Your friend can use the App Store app that's installed on the iPhone by default in order to download and install any app he likes from the iTunes App Store.

HT4623 yesterdsay i downloaded ios6 on my iphone 3Gs & the iphone stoped working it's just appears the apple & disappers the apple it was all the night like this what can i do?is it installing the ios 6 or what's the problem???

yesterdsay i downloaded ios6 on my iphone 3Gs & the iphone stoped working it's just appears the apple & disappers the apple it was all the night like this what can i do?is it installing the ios 6 or what's the problem???

Thank You, thank You ...so much......that feature made me crazy!
Ocean20 wrote:
This can be turned off in settings/accessibility/zoom. Then on the next screen turn off

I am being asked to upgrade to iCloud Drive but indications are that I will not be able to access up to date details on any of my documents on my Mac without going into iCloud first. Have I got this interpretation right or can I save changes to acce

I am being asked to upgrade to iCloud Drive but indications are that I will not be able to access up to date details on any of my documents on my Mac without going into iCloud first. Have I got this interpretation right or can I save changes to access the new versions on my iMac?

That is Apple's statement:
Using iWork with iCloud Drive - Apple Support
Options for iWork customers
You can upgrade to iCloud Drive today if you want to keep your documents up to date in iOS 8 and OS X Yosemite, and you want to use the iWork web apps on iCloud.com and the Share via iCloud feature.
You can upgrade to iCloud Drive later if you want to keep your documents up to date with your apps on iOS 7 or earlier and OS X Mavericks or earlier.
Upgrade to iCloud Drive today
To access the most recent versions of your documents from a Mac with OS X Mavericks or earlier, you’ll need to go to iCloud.com and access Pages, Numbers, and Keynote from there. On a PC, you can install iCloud for Windows and set up iCloud Drive.
If you upgrade to iCloud Drive now:
Your documents will keep up to date across devices with iOS 8, Macs with OS X Yosemite, PCs with iCloud for Windows, and iCloud.com.
Your documents will no longer keep up to date on devices with iOS 7 and Macs with OS X Mavericks or earlier.
You’ll be able to use the iWork web apps on iCloud.com.
You’ll be able to use the Share via iCloud feature with iOS 8, OS X Yosemite, and iCloud.com.
Documents you previously shared via iCloud will be accessible to collaborators.
Upgrade to iCloud Drive later
Note that until you upgrade your iCloud account to iCloud Drive, you won’t be able to use the iWork web apps on iCloud.com or the Share via iCloud feature. If you don’t upgrade to iCloud Drive at this time:
Your documents will keep up to date across devices with iOS 8 and across devices with iOS 7 and Macs with OS X Mavericks or earlier.
You won’t be able to use the iWork web apps on iCloud.com.
You won’t be able to use the Share via iCloud feature.
Documents you previously shared via iCloud won’t be accessible to collaborators until you upgrade to iCloud Drive.

Can iOS 7.0.2 be installed without installing iOS 7 first?

Similar Messages

Maybe you are looking for