Can iOS only handle two seperate last names (QR-Code-Scan; vCard)

Hello,
I'm having trouble scanning a QR-Code (vCard) from a business card. If the last name consists of three names iOS only displays two of the names. Example: Max van den Test (contacts app Max den Test).
I've already tried lots of QR-Code scanners from the App Store and tools to generate QR-Codes (vCard). It seems to be a problem with iOS. Android and Windows Phone display more than two last names just fine. I hope someone can help.
Best regards

MatejLach wrote:
clamd is running, user and group clamav all have the relevant permissions as far as I can tell, however upon scanning my mail, I always end up with the following error:
Scanning error:
/home/username/.claws-mail/mimetmp/0000000e.mimetmp: lstat() failed: Permission denied. ERROR
Seems like a permissions error to me... maybe check the actual file it is attempting to scan... I know it is in your home folder, but just to be sure, you might want to check that everything is sane.

Similar Messages

  • I use iCloud to store my contacts but in Outlook it only sorts by first name. Although in iCloud it can be set to sort by last name, I cannot get it to do that in Outlook.

    I use iCloud to store my contacts, but in Outlook it only sorts by first name. Although in iCloud it can be set to sort by last name, I cannot get it to do that in Outlook. I have thousands of contacts and cannot sort though all the first names to find one.How do I get it to sort by last name in Outlook?

    By reading this:
    http://office.microsoft.com/en-us/outlook-help/display-the-contacts-list-in-last name-firstname-format-HP001034286.aspx

  • Can't get rid of a last name in address book

    Hello,
    I of course added my mother to my address book. At one point I had entered her proper first and last name. Until one day I realized that entry was carrying over in emails. So I deleted the last name and entered Mom for the first name.
    Every since then I've stuck with Mom Smith as a contact. I have .mac, which I think might be part of the problem. I've also tried deleting the entry from everywhere and waiting a few weeks, and several syncs later. I then reentered the first name only, and the problem has crept back. Except now, the only place it shows as Mom Smith is the address book and mail. On .mac it's correct.
    Please help!
    Thanks.

    Okay, half way there... I guess.
    I should mention that there are two different addresses for Mom Smith.
    In most cases when autofilling, the name truncates into the correct name. (even though the dropdown that pops up shows the wrong one) Which in a way solves my issue. (I've recently tried the 'delete everything and try again' approach, after the upgrade to leopard. But, this problem has had a way of creeping back in the past)
    However, in one instance, the address did not shorten up, and I was able to delete it as you instructed. I'm not sure what I did to get it to do that, and have been unable to delete the second address of Mom Smith. When it auto-shortens to just Mom, the 'remove previous' option isn't there.
    I've tried clicking the address from the dropdown, hitting tab, and hitting return. All of which seem to switch it from Mom Smith in the drop down, to the Mom I recently 'fixed'.
    Thanks for you help.

  • How can I display the first and last name using a paramater as employee ID?

    Hi SAP,
    I have a parameter that is called {? Employee ID}.   What I want to do is display the first and last name based on the employee ID value entered in {? Employee ID} in the page header of the report.  Right now, when I put the following formula in the page header only some pages get the right result while other pages dont....
    if table.employeeid = {? Employee ID} then
    table.firstname" "table.lastname
    It appears as though if the first record in the details section on the beginning of each page happens to be the employee under {? Employee ID} then it prints it correctly, if it isn't I get a null value in the page header.
    Anyone have any ideas?
    Z

    Hi Try this,
    Whileprintingrecords;
    if ={?EmpID} then
    Also check the option "Default values for null" in the formula editor.
    Regards,
    Vinay

  • Please tell me that I can sort my contacts by "Company,Last Name"

    I just purchased a Treo 650
    I depend on being able to sort my Contacts by "Company, Last Name" where is this preference feature on the Treo 650 in Contacts.
    If this is not possible the Treo becomes useless to me.
    Please tell me I am missing something.
    Post relates to: Treo 650 (Cingular)

    Yes you can "sort" by Company Name BUT....you cannot "search" by Company Name -- when you try a search it just keeps searching in the "name" fields and does NOT return a Company Name.
    --if you know the name of the person you want to call (which you more than likely will) then searching by name is fine
    but
    --if you can't remember their name (or there are multiple names) but want to look up the company and then scroll through list of names at that company -- forget it -- I can't make it work.

  • Yosemite clean install shows that it can partition only in two

    HI,
    I have searched the forum, but wasn't able to find a suitable answer in my case.
    I have done a clean install of yosemite on macbook pro. I wanted to install ubuntu(linux). For which if I want to make partitions it shows like "You can only split the partition in two by click +" . Why can't I make uneven partitions like 250GB for Mac and 100 GB for linux? Am I missing something here?
    Thank You!

    You can. See:
    To resize the drive do the following:
    1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
    2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
    3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.  (Note: You can only make a partition smaller in order to create new free space.)
    4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
    You should now have a new volume on the drive.
    It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.

  • Can i back up two seperate devices to itunes? and then restore both to the correct new phones?

    Looking to back up two iphone 4s, then restore both tomorrow to the two new iphone 5s, can i do two devices as how will itunes know to differentiate between the two?

    First off, they all need to be registered to the same AppleID. Same one you should log into when you start up iTunes.  When you back up in there, preferably storing locally on the computer and not the iCloud, each device creates its own backup file (only one, by default, but that can be changed). Look in iTunes / Preferences / Devices (hover the cursor over each entry for more info).
    So yes, you can back up more than one device onto an iTunes setup. When you plug the brand new iPhone for the first time, iTunes will recognize the fact and offer to Restore from a backup, giving you a list to pick from. Which leads us to an issue: you can only restore from a single backup, iTunes has no means of merging two backups into one.
    Even if you manually force a Restore, the phone will be wiped before the backup is applied. Hence, no merging occurs.
    Edit:  If you want to keep more than a single backup of a phone in iTune's backup library, right-click (or control-click) on any backup in Preferences / Devices. Choose Archive from the popup menu and name the result appropriately. Next time you back up that device, a new file will be created, with the default name.

  • When I transferred the info from an old ipod, broken, to a new one the contacts I received were from all over the place, many whom I did not even know.  Can I only restore from the last sync or can I go back further to get my old contacts?

    I recently had to replace my ipod touch.  The old one had a broken button and would not change the screen correctly.  Apple gave me a new ipod and told me all I needed to do was update the new ipod from the itunes which I had backed up prior to getting the new one.  When I did the sync , the info for my contacts was giving me names and addresses from all over the place except the itunes.  Can I retrieve info from a previous sync or only to the last sync that was made?

    Yes I did.  When installing the new ipod it had to update the software, then it sync'ed the information onto the new ipod.  The contacts were not the original ones, and all the phone numbers have dissappeared.  Is there any way to recover them?

  • Can iOS 8 Photos sort by File Name insted of Date?

    I want to sync a set of folders from my windows 8.1 pc to my iPhone 5c running iOS 8.  when i sync with iTunes the folders in the photos app show in right order. the problem is the photos are not in ordered and I named all my files in sequence.  below is a example how I have folders named with file names.  maybe someone can give me advice so I can get my photos for being so random.
    Misfile- Book #01:
    20040223_Z1ow.jpg
    20040224_4y0E.jpg
    20040225_U00r.jpg
    20040226_Q8j6.jpg
    Misfile- Book #02:
    20041130_PiTf.jpg
    20041201_y4Pi.jpg
    20041203_EB4A.jpg
    that is how my file structure is in windows but when I sync to my iPhone my actual photos are scattered all out of order.  any ideas???
    thanks in advance, Alice

    Since it is not possible is ther a app in the App Store someone could recomend

  • TS1292 Two card two seperate problems .  One code scratched off ,  one tore off

    Help w/ I tune gift card

    You can contact the iTunes Store - http://www.apple.com/support/itunes/contact/.  At the bottom left, you will see a "contact support" link.  Just select it, then select "iTunes Store".  Select "iTunes cards and codes", then "iTunes Card code is not readable", and follow the on screen instructions.

  • Contacts' first name field gets inserted in last name field when syncing

    I have a strange behavior when syncing between iOS and the Mac:
    A few contacts that I have only have a first name, let's say "Anna".
    Everything runs fine on iOS - I write that person a mail and everything's fine. But the moment I write Anna a mail on my Mac the last name field also gets the entry of the first name field, thus leading to the contact "Anna Anna".
    All I can do now is delete the last name field and everything's fine till I write a message on my Mac again.
    Note: this problem only occurs on my Mac, not on iOS.
    Second ote: the moment I'm sending the Mail on my Mac, iOS gets this error over sync.
    Third note: I recognized that Mail.app's autocomplete/history of contacts has somehow stored those accounts like "Anna Anna". Removing the Previous Recipients from the list hasn't solved the problem yet.
    This problem only covers 4 of my contacts, but being the most used ones this is driving me nuts.
    Any help would be greatly appreciated!
    Best regards,
    Tobi

    Yup have tried resetting the contacts setting to switch it the wrong way round, didn't solve the problem - then back to the correct way round, also didn't solve the problem.
    It's just the way that sometimes it shows firstname then lastname, and sometimes it shows lastname then firstname. Not one or the other but both ways round.
    I have txts in my inbox that are first name first, underneath txts that are lastname first.
    All very confusing I'm sure you can imagine!!

  • Imported contacts have last name/first name reversed

    When I had my old Samsung dumb phone, I listed all my contacts by last name.  (There was a single name field in the old phone, so I listed everybody as "Smith, Bob.")  But when I had my contacts list imported into my new iphone 5c, it read all the last names as first names and vice versa.  (It put "Smith," in the first name field and "Bob" in the last name field.)  I know I can choose to sort contacts by last name or first name.  But when I choose "Last, First" it lists all my contacts by first name.  So now when I enter a new contact directly into the iphone, it's backwards from everything else. 
    What am I supposed to do here?  Am I just supposed to keep entering contacts backwards for as long as I have this phone?  Or is there some sort of app or setting to fix this? 

    Hello X4r7s
    Friend if possible also sort your comets.
    Enter application Contacts
    Slide your finger from the top down
    Two options appear and Configuration Help
    Enter settings
    Sort contacts tab deployed by:
    Here choose the method you want:
    Name
    LasName.
    Company
    In your case option 2
    Regards...
    Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
    Accept as Solution to ** Comments **
    @gutijose14
    BBM Channels  PIN: C0007093A
    Do not forget to give LIKE    Those people who help you and advise you about your doubts.  if the review has been SOLVED** # 4LL  #ÉliteRoad  Make a backup of your BlackBerry
    BlackBerry Protect and  BlackBerry Link constantly.  #ichooseBlackBerry10 Gutijose14 Forums Veteran I

  • How can i join this two query?

    I have two table table employee and CSEReduxResponses
    In table employee i have
    CREATE TABLE [dbo].[employee](
    [emp_id] [int] IDENTITY(1,1) NOT NULL,
    [emp_namefirst] [varchar](255) NOT NULL,
    [emp_namemiddle] [varchar](50) NULL,
    [emp_namelast] [varchar](255) NOT NULL
    on responds i have 
    CREATE TABLE [dbo].[CSEReduxResponses](
    [response_id] [int] IDENTITY(1,1) NOT NULL,
    [employee] [int] NOT NULL,
    [employeedept] [int] NOT NULL,
    [star] [tinyint] NOT NULL,
    [status] [int] NOT NULL,
    [approvedby] [int] NULL,
    [approveddate] [datetime] NULL,
    [execoffice_status] [int] NULL,
    Im trying to get the employee with the MAX execpffice_status( this is either a 1 or 0).
    i have this query that i made for it
    select top(1) with ties employee, SUM(execoffice_status) as 'total'
    from   CSEReduxResponses
    group by employee
    order by 'total' desc
    my query for employee table is 
       select emp_namefirst as first , emp_namelast as [last]
    from phonelist.dbo.employee where emp_namefirst is not null
    How can i get this 2 query together so i can output the employee (first and last )name
    with the max exeoffice_status?
    i use :
    Microsoft SQL Server Management Studio 10.0.2531.0
    ps: sorry if i put this is the wrong forum, this is my first time here and first post.

    Are you looking for the below?
    CREATE TABLE [dbo].[employee](
    [emp_id] [int] IDENTITY(1,1) NOT NULL,
    [emp_namefirst] [varchar](255) NOT NULL,
    [emp_namemiddle] [varchar](50) NULL,
    [emp_namelast] [varchar](255) NOT NULL
    Insert into Employee Values('abc','bcd','cdf')
    Insert into Employee Values('xyz','yxw','xwv')
    CREATE TABLE [dbo].[CSEReduxResponses](
    [response_id] [int] IDENTITY(1,1) NOT NULL,
    [employee] [int] NOT NULL,
    [employeedept] [int] NOT NULL,
    [star] [tinyint] NOT NULL,
    [status] [int] NOT NULL,
    [approvedby] [int] NULL,
    [approveddate] [datetime] NULL,
    [execoffice_status] [int] NULL,
    Insert into [CSEReduxResponses]( employee,employeedept,star,status,approvedby,approveddate,execoffice_status)
    Values(1,100,1,1,1,GETDATE(),0),
    (1,100,1,1,1,GETDATE(),1),
    (2,100,1,1,1,GETDATE(),0)
    ;With cte as( Select *,SUM([execoffice_status]) over(partition by Employee) sumstatus From [CSEReduxResponses] )
    Select Distinct A.*,B.sumstatus
    From Employee A
    Inner Join cte B On A.emp_id = B.employee
    --OR
    ;With cte as( Select employee ,SUM([execoffice_status]) sumstatus From [CSEReduxResponses] group by Employee)
    Select Distinct A.*,(Select sumstatus From cte B where A.emp_id = B.employee)
    From Employee A
    Drop table Employee,[CSEReduxResponses]

  • Can I set up two ITune accounts on one MacBook?

    Can I set up two seperate ITune accounts on one MacBook? If so, how?

    Exactly what do you mean by set up?
    In iTunes you can authorize more than one iTunes accounts using the 'Authorize This Computer…' command under the Store menu. Run the commend twice for each account.
    Here's an article that explains what I'm talking about.
    http://www.everythingicafe.com/quick-guide-one-iphone-multiple-itunes-accounts/2 010/03/25/

  • Dear   I have installed last version of iOS   And  i lost my contact names i restore contact names from setting i restored some of them what can i do now i have important names i have lost please ?

    Dear   I have installed last version of iOS   And  i lost my contact names i restore contact names from setting i restored some of them what can i do now i have important names i have lost please ?

    Within Contacts, tap Groups at top left. Make sure all contact groups are checked to show, then tap "Done" at top right.

Maybe you are looking for