Can iPad 2 3G wifi print to canon pixma ip 100

Can iPad 2 3G wifi print to canon pixma ip 100

Khaled-
The iPad only prints by WiFi, so your 3G is not involved.  There must be a WiFi path between the iPad and the printer.
I do not believe your Canon printer is compatible with AirPrint, so you will need an alternative way to print.  Look in the iTunes store for Canon Apps that can print to your printer.  There are other Apps such as Print n Share that should work for you.
Another way is to share your computer's printer as AirPrint over WiFi.  Printopia is a Macintosh program that can do this.  For a free alternative, search the web for AirPrint Activator.  Versions are available for both Mac and Windows.
Fred

Similar Messages

  • How can I get two-sided print on Canon Pixma IP3000  with Snow Leopard?

    I've just upgraded to Snow Leopard and find that duplex printing is no longer available. How do I get it back?

    You should have a menu item called Duplex Printing and Margin. This is part of the v10.26 driver that is provided via Software Update.
    This was the same menu item that was available with the v4.8.3 driver that was included with OS X 10.5. If you were not using this menu previously with 10.5 then maybe you were using the iP3000 Gutenprint driver?
    Pahu

  • My ipad can not see my wifi printer

    my ipad can not see my wifi printer ????????

    Is it an AirPrint enabled printer ? The supported models are listed on this page, and there is also a bit of troubleshooting at the bottom : http://support.apple.com/kb/HT4356
    If it's not an AirPrint model, then some manufacturers have their own apps in the iTunes app store, and there are also third-party apps such as Print Central For iPad and Print n Share which might work with it.

  • My mbp can't see my wifi printer

    I can print from my iPhone and iPad to my wifi printer, but my mbp can't see my printer.  Any solutions?

    Hello sandylp1,
    Thanks for using Apple Support Communities.
    To troubleshoot printer issues on your Mac please follow the steps in the article below.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    Take care,
    Alex H.

  • Is it possible, in any way, to print from an iPad without a wifi printer?

    Is it possible, in any way, to print from an iPad without a wifi printer?

    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
     Cheers, Tom

  • I can't find a wifi printer on my imac

    Hello,
    I can't find a wifi printer on my imac. It's always linked automatically to wifi printers before. It's an HP deskjet, I've tried downloading drivers for it, but still no joy. Any ideas what I should do? Thanks,

    In future posts, please tell us more of the details - which printer, which Mac, which OS X version, etc. Have you changed anything lately?
    First thing I would try is Reset Printing System (and after, try adding the printer again):
    Mac OS X: How to reset the printing system - Apple Support
    Read here about which printers are supported, and how we Normally get drivers now (Not by downloading directly from Manufacturer):
    OS X: Printer and scanner software available for download - Apple Support

  • Canon Pixma Pro-100 prints very dark

    I see that this is a recuring problem with the Canon Pixma Pro-100, but as nothing I have found online helps I'm asking and are hoping that someone can solve this problem for me.
    Just picked up a Pixma Pro-100 today, and installed it on my 2011 iMac 27" (Yosemite) with downloaded drivers from Canon's website to be sure i have the latest ones. I also checked the printers firmware but that's the latest at 1.100. Wether I'm printing via Lightroom or Photoshop; or via Canon Print Studio Pro, My Image Garden, or via LR / PS directly; with- or without PS as color manager; the prints turns out to be much to dark.
    I have to set an exposure of +2/3 in LR to be anywhere close to getting the same result as on the screen. I'm also careful to select the right ICC profiles for the correct paper. My monitor is calibrated with an Spyder4pro and I also re-calibrated it during this process to see if that helped.
    Well. Long story short; the prints are to dark. So i borrowed my wife's 2013 MacBook Pro (Yosemite) Spyder4pro, and installed the latest drivers from Canon. Again; on this machine the prints are also to dark with about +2/3 to correct for the printer to do something that looks like the monitor. Both monitors are also set to about 30% brightness.
    I also have access to an Epson Stylus Photo R3000 and the prints from this comes out much brighter.
    Sadly I see that many others also have the same problem. So; here's the question. How do I fix this? Do i have to return the printer again and get a refund? Because this is clearly not good enough.
    Solved!
    Go to Solution.

    Hello again. I recognize that a print is good if you like it and bad if you don't, despite what others might say, but I will at least share my experiences. They might help you or others who are following this thread.
    My monitor is calibrated with Spyder 3. Gamma 2.2, 6500K, 83 cd/m^2. Contrast at 50%; brightness about 52%. My monitor lets me choose blackness level - it defaults to 50%.
    When I print the test image I linked to above, using Lightroom, with no adjustments, my technical output is as follows:
    Middle step wedge shows twelve disticnt steps. Whitest step is color of unprinted paper.
    It varies from paper to paper, but I can discerne at least the 252 step and on some papers 253 - telling me I have good highlight detail.
    On the black side I discerne 8 or 10, nothing lower. (That sounds like what you are reporting).
    Artistically I am very happy how my print looks - nice red strawberries, good flesh tones, etc.
    One my monitor, the on-screen image is almost identical to the print. I am surprised that you can see the 2 wedge step on screen at a very similar brightness.
    I also checked out this B&W test image:
    http://www.northlight-images.co.uk/article_pages/bw_printing/bw-test-image-2.html
    You are probably aware of this since you are printing with Print Studio Pro, but others may not be.
    You can print a series of test images:
    find the one that best suits your taste, enter the calibration values in PSP, and save them as a custom setting. Then, each time you want to print recall the setting.
    You can do a similar thing in Lightroom using the printer driver and User Templates.
    There would be some one-time trial and error to that approach.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Won't print to canon PIXMA ix6820

    how can i print to canon PIXMA ix6820 with PSE12?

    docforr wrote:
    Thanks for responding to my plea.
    I get a message that "the saved printer information is not compatible
    with this version of photoshop elements or the saved printer is no
    longer available.
    The printer and Adobe elements were brand new. The printer works with
    other programs. It never worked.
    PDF
    Have you ruled out an issue with the driver for the printer? It is possible that the material on the installation disk was developed prior to PSEv.12. I understand that everything is new, but who knows what the date of production is. You can check on Canon's web site for driver update.

  • Canon Pixma Pro-100 printer ejects 3.8 in of a 4X6 paper and prints only 2.2 in of the image printing from Photoshop CS6, I'm sure I set everything correctly - what could I be missing?

    Using Mac Pro running Snow Leopard (10.6.8) & editing & printing from Photoshop CS 6.
    Have new Canon Pixma Pro-100 printer and set it up yesterday.  First thing printed was a
    document from MS Word (a letter) 8.5 X 11 plain paper - this came out OK.  Next I fire up
    Photoshop and open a 4 X 6 inch image to do a test print.  I set it up in the print dialog as
    4X6 paper, Canon's Pro Glossy paper profile, rear tray, standard print quality, Photoshop
    manages the color.  I load the paper in the rear tray close the covers and hit print.  Now, when
    it starts to print the printer moves about 3.8 inches of paper out of the printer and starts printing
    on the remaining 2.2 inches then spits the paper out.  It does this in Photoshop (any image it doesn't
    matter), and it does it printing from Capture NX.  I have been able to get it to print on the paper
    correctly using Apple's Preview program but that that's not going to do me any good.  I was on
    the phone with Canon tech support for about 2 hours and they were completely puzzled suggesting
    I would have to use Canon's printing apps instead to print - that doesn't do me any good either.
    I want to be able to print from Photoshop.  Any one every heard of this or experienced the same
    problem? Thanks JamesD!

    Hello again. I recognize that a print is good if you like it and bad if you don't, despite what others might say, but I will at least share my experiences. They might help you or others who are following this thread.
    My monitor is calibrated with Spyder 3. Gamma 2.2, 6500K, 83 cd/m^2. Contrast at 50%; brightness about 52%. My monitor lets me choose blackness level - it defaults to 50%.
    When I print the test image I linked to above, using Lightroom, with no adjustments, my technical output is as follows:
    Middle step wedge shows twelve disticnt steps. Whitest step is color of unprinted paper.
    It varies from paper to paper, but I can discerne at least the 252 step and on some papers 253 - telling me I have good highlight detail.
    On the black side I discerne 8 or 10, nothing lower. (That sounds like what you are reporting).
    Artistically I am very happy how my print looks - nice red strawberries, good flesh tones, etc.
    One my monitor, the on-screen image is almost identical to the print. I am surprised that you can see the 2 wedge step on screen at a very similar brightness.
    I also checked out this B&W test image:
    http://www.northlight-images.co.uk/article_pages/bw_printing/bw-test-image-2.html
    You are probably aware of this since you are printing with Print Studio Pro, but others may not be.
    You can print a series of test images:
    find the one that best suits your taste, enter the calibration values in PSP, and save them as a custom setting. Then, each time you want to print recall the setting.
    You can do a similar thing in Lightroom using the printer driver and User Templates.
    There would be some one-time trial and error to that approach.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • How to print from Lightroom 5 to Canon Pixma pro-100?

    Using Lightrooms printmodule with this printer is a big problem for me. Using Cannon Print studio Works, but then you
    loose a lot of great functionallity in LR print module.
    It seems that when I make a preset or set up printer with correct ICC profile the canon printer driver automatically resets to its own default.
    It looks like a print driver in the background resets everything i do. Very confusing and Canon support points to adobe.
    My setup:
    Macpro with  OSX 10.9.2  (latest version)
    Lightroom 5.3 (creative cloud member, always latest version)
    Canon Pixma pro-100 (bought new april 2014)
    I have looked several places on internett and it looks that there are a lot people having similar problems.
    I would appriciate any help to find an easy setup/soltion !
    Thanks in advance
    Nicolaas

    I have the Pixma Pro-100. But I'm using Windows 7, so I'm afraid I can't be a lot of help to you. I tried to help someone in another forum the other day and showed some screenshots, but he said he didn't have anything like that on the Mac.
    If you're going to use ICC profiles, you have to turn off color management either in the printer or in the printer driver. It doesn't matter which one, just make sure that it gets turned off. Then what I do is I use soft proofing with the appropriate paper profile to prepare a soft proof copy for printing. After I have set my printer settings the way I want them and have everything just right in Lightroom, I save the preset for printing. And it seems to keep what I have set. If you can show me some screenshots of your printer driver, perhaps I can be of assistance.
    Regardless of whether I allow Lightroom to manage the color or allow the printer to manage it, I am getting really nice prints. So I'm sure there's something that you are probably just overlooking.

  • Frustrated trying to print from Canon Pixma 9500

    Does anyone have any tips for printing from Canon Pixma 9500?
    I profiled the screen, printer and paper using colormunki.
    Trying to print from photoshop. Frustrated that the printer interface isn't as described in many online forums (for example, it seems impossible to turn off colour management).
    Getting strange blue borders around everything when using the paper profiles via colormunki.
    Does anyone have any good tips?
    .......help.....!

    I used colormunki to calibrate my screen, printer and to make a paper profile.
    Read one site that suggested the strange blue borders are related to V4 vs V2 paper profiles...whatever that means. Apparently it is an issue printing from photoshop.

  • Canon Pixma Pro 100 won't print

    Hopefully someone can help.  I just purchased a new Pixma Pro 100 and diligently set it up using a USB connection to my laptop (Windows 8, 64 bit).  The printer printed the alignment page fine, but won't print anything else (including a Test Page from the device Properties box).  I immediately get an on scree error message when trying to print.
    Any thoughts out there?

    Unplug the printer for 15 minutes.  Unplug it from everything.  Don't use My Image Garden.  Use Easy Photo Print EX (came with your printer) or some other program.
    EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
    Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

  • Can't install win7 scanner driver for canon pixma mp260, help please !!!

    can't install win7 scanner driver for canon pixma mp260, help please !!!

    HOW CAN I FIX MY PIXMA CANON WITH OUT THE CD

  • Canon pixma pro 100

    Hi guys,
    I've just received my new canon pixma pro 100 printer & I'm having problems setting up. When powered up the printer instantly made a grinding noise. Switched it off a few times but the print head holder failed to slide along the rails. All stoppers & tapes have been removed so nothing to obstruct the set up process.
    Can anyone help or had similar issues?
    Thanks in advance.

    You are possitive there is no packing or tape left inside?  100% sure?
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • Canon Pixma pro 100 Ink how to identify the black cartridges when label was accidently removed

    I just started putting a new Canon Pixma Pro 100 printer together- I was not thinking and removed two of the grey (light), and grey cartridges labels. Now I do not know which to put in the slots, I cannot see any gradient by holding them up to the light, and the actual cartridge is not marked. I am soooo dumb, any suggestions.

    You  got a 50/50 chance.  Go for it!  
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

Maybe you are looking for