Can ipad 4 be charging while you use it, have 3rd generation, won't charge during use thanks

can ipad 4 be charging while you use it, have 3rd generation, won't charge during use thanks

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Similar Messages

  • Shuffle 3rd generation won't charge - help!

    I lost my USB charging cord for a while and my shuffle sat stagnant and out of charge.  Now I have a new cord (which works on my daughter's newer shuffle) and it won't take a charge.  Is it dead?

    Very likely considering the Shuffle went for a period of time without any sort of charge, which can kill the battery a lot faster than normal usage.
    B-rock

  • IPad fourth generation won't charge during use.

    Hi, I recently noticed that my new iPad fourth generation won't charge while I'm using it. The lightning cord is plugged in and connected but the iPad keeps loosing battery while I use it when it signals 20% left! Why does it do this? Is Apple going to fix this? I love using iPad and I hate devices that need to be left alone for a while until fully charged... Anyways, is it normal? Does anyone else's iPads do this? Please tell me!!

    Replace your 10W charger with a 12W charger.
    http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter

  • "The folder can't be open because you don't have permission to see it?

    I click open my Macintosh HD - open users folder-thank open user name folder - there are many folders a few with a red button with an minus sign ! I try to open one of these folder wiht minus sign only to get the following message: "The folder Documents can't be open because you don't have permission to see its contents."
    What gives? There are a few other folders that give me this same message!

    I followed ur directions : went to Get Info-under Sharing & Permissions it said I had no access. Under this message there was two column, one titled "Name" & the other "Privilege." Under "name" was my user name & under "Privilege" was Read & Write." The second row under "Name" was "everyone" with "No Access" in the "Privilege" column. I opened the padlock. A window with this message appeared: "Type your password to allow Finder to make changes." I entered my password, which was accepted. I have to admit at this point I was lost in what to do.
    Closed the padlock. Tried to open document with no luck! <ha>
    My "users: folder has two users name: under the :house: icon is one name while another folder has another user name i use. I don't have any problem opening any folder in the "House" icon folder - it's the other folder that I have an issue with.
    What next?

  • The operation can't be completed because you don't have the necessary permission.

    My wife and I share files on our home network all the time. the problem is when I create files on my Mac Pro or Macbook Pro (.doc, .tif, .jpg, .psd, .png, etc) and place them on her Mac Mini. she can not edit them. She gets the message: "The operation can’t be completed because you don’t have the necessary permission."
    The only way I know how to fix the problem is to delete the file from her Mac, change the permissions on my Mac (via Get Info), and then re-copy the file back to her computer. The problem is there are hundreds of files, in different folders on her Mac, so using a batch command with Get Info (Cmd, Option I) is not an option.
    First of all why are all the files I create "Read only" for "staff" and "everyone" in first place?
    Is the problem with my computer or with hers?
    Is there a way for her to overide the permissions so I dont have to spend days or weeks going through every file I have created on my Mac?
    Here is a screeen shot of one file:
    Here is a Screen shot of the Folder on her MacMini that I drop files into:

    She needs to connect to the file server with your name and password. Then she'll have the same access you have. I assume that's what you want.

  • I backed up my old core 2 duo imac and and was trying to transfer files to my new 2011 imac and when i go to oppen a folder from what i transferred it says "The folder "Music" can't be opened because you don't have permission to see its contents."?

    I backed up my old core 2 duo imac and and was trying to transfer files to my new 2011 imac and when i go to oppen a folder from what i transferred it says "The folder “Music” can’t be opened because you don’t have permission to see its contents".  Why cant i access the files from my old mac?  I tried the time machine and that isnt working either.  I have files that I need to use on my new mac, all my old programs and such.  I thought they said it was easy to get your files from one mac to another.  Please help.

    Your account names are probably different on the two Macs. If you know the UNIX command line, open a terminal window and run:
    $ id 
    You should see a line that starts with something like this:
    uid=501(your_user_id_here)
    now check the owner of the folder you copied over:
    $ ls -ld Music
    drwx------+ 8 some_user_id_here  staff  272 May 14 16:08 Music
    Do the IDs match? If not, you could change the ownership. Say your id is "johnsmith"
    $ chown -R johnsmith Music
    Now try and access it with iTunes.

  • I get this error code when trying to update from an older version of Firefox: The operation can't be completed because you don't have permission to access some of the items.

    While trying to upgrade from a previous version of Firefox, I get this error code: "The operation can’t be completed because you don’t have permission to access some of the items."
    == installing ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    I resolved the problem in Snow Leopard by logging out of my (admin) account and logging into my daughter's account on the same machine. She doesn't have admin privileges, so when I tried to install Firefox 4 in her account, I had to authenticate with my admin identity and PW. Installation went smoothly after that. My guess is that you could also simply create a new account on the same machine and install Firefox 4 from that. I have no idea why this works.

  • HT201250 i'm getting message: can't be opened because you don't have permission to see its contents. and he operation can't be completed because an unexpected error occurred (error code -8003).

    I took my computer in to have the Backup restored onto my computer after having a new harddrive put onto my 1year 1/2 old MacBook Pro. When i got it home there was a new User that i had to logout of to getting into my normal user. Don't know why this was, just figured the Mac guys that installed my backup did this for some odd reason. Today i could not open any of my files in the backup on the time machine. All the folder had line going thought them and when i clicked on them I revieved this message: can’t be opened because you don’t have permission to see its contents. After talking with that same mac store. I decided to just delete all the files out of the time machine as it was just put back on my computer and i have everything i need. Hours later when i tried to empty the trash i got this messsage: the operation can’t be completed because an unexpected error occurred (error code -8003).
    Any advise how to fix my problem?
    thanks in advance

    While you see a single trash can, in reality there are trash folders on each mounted volume.  I don't use TM but what you are describing implies that a TM drive is no different with the way trash is treated.  So when the TM is unmounted the trash folder on there is gone and thus the trash looks empty.  Remount the drive, the trash folder on it now causes the trashcan to look like something is in it.
    If TrashIt! could not remove the file, I'm sorry, you will need to use the terminal.  We can do this one step at a time so you only have to copy/paste the lines into terminal (except the first time).  So launch Terminal (in utilities).  You might want to make the window that is shown a bit larger with the grow box since it's pretty small.
    This first line is the only exception to the copy/pasting since you have to enter some information.
    sudo ls -laR /Volumes/your-TM-volume-name/.Trashes
    where your-TM-volume-name is the name of your TM volume.  That's the part you have to fill in since I don't know it.
    When you hit return the sudo in that command will cause a prompt for your admin password.  Enter it and hit return again.  Note the password will not be shown as you type it.  Post the results so I can tell you what to do next.
    Note this ls command is not doing anything but listing the files in the TM's .Trashes folder.  Remember I said each drive has it's own trash folder.  .Trashes is it.

  • I have produced a number of DVD on my iMac. They are stored in a folder called Burn Folder. I want to get them into iTunes so I can play them on Apple TV. I have tried to convert them to MP4s using Handbrake but Handbrake does not recognize these files.

    I have produced a number of DVD on my iMac. They are stored in a folder called Burn Folder. I want to get them into iTunes so I can play them on Apple TV. I have tried to convert them to MP4s using Handbrake but Handbrake does not recognize these files. I am stumped.

    If you have the original movie files, you'd be much better converting those, otherwise try MPEGstreamclip.

  • Can no longer access folders on my network. The folder can't be opened because you don't have permission to see its contents.

    Every since I nstalled maverick I have not been able to open folders through my home network. A dialoge box says
    The folder  can’t be opened because you don’t have permission to see its contents. I have always used an open network and never had issues. Now the strange part is I can open files if I use photoshop or illustrator to access them but I need to access all files not just select ones using a program.I have many shared folders on my network for everyone to access work files, none of them are working. I am running a dual system network with PC's and Macs.The files are, and always have been, located on an external drive attached to the primary PC as a shared drive.  PLEASE HELP

    https://discussions.apple.com/message/20971272#20971272

  • I keep getting the error message "The operation can't be completed because you don't have permission to access some of the items."

    When I try and move an application to my application folder from the installer and when I try to empty the trash, I get the error message, "The operation can’t be completed because you don’t have permission to access some of the items."  This has only been an issue since I upgraded to Lion.  I'm using a July '07 white Macbook 2.16 Intel Core 2 Duo.  In my trash I only have an older version of a software that I updated (Divy).  The software I'm trying to install is Angry Birds Rio.

    Always use the same websites you are having problems with so you can monitor the changes.
    Try the reset for Safari:
    And for Firefox:
    http://www.ehow.com/how_6874158_keyboard-working-certain-websites-firefox.html
    Try logging in to the guest account as well to see if you have the same problems there, it might be a logging in issue.

  • Operation can't be performed because you do no have permission

    "The operation can’t be completed because you don’t have permission to access some of the items."
    I've been trying to free up space on my mac for the past month with about 4k in files but I get this error message and it doesn't specify the file that I don't have permission to. It'll usually get about half way through before popping up how do I find this file (out of 4,000)?

    It would be useful to know where you are trying to move these files from - it may be normal if they belong to the system it is not a good idea to try to move/ delete them. Hopefully these items are within your home folder?
    Finder is buggy it keels over far to easily when copying or moving many files/ folders & it laughs at you with useless errors like this. Disk Utility's repair permissions doesn't touch your home folder permissions, so it may explain why nothing changed with that.
    Try other ways to avoid Finders cruel humour…
    Carbon Copy Cloner, ChronoSync or many other file copy apps. Chronosync is better for syncing folders, whereas CCC is better for bootable copies, but both will actually copy data & can verify that it copied successfully & log any failures. You can give them admin rights to overcome some permission issues too.
    The solution for fixing permissions on items in your home folder is to repair them in recovery mode…
    I suggest you backup before you begin just in case.
    Boot holding cmd+R. Recovery mode should startup (assuming you have a recovery partition).
    Select Terminal from the Utilities menu.
    Enter the word…
    resetpassword
    … & hit return.
    A GUI app will open, select the main boot HD.
    Select your troublesome user account in the popup menu.
    Then click the Reset button at the bottom right. It will "Reset Home Folder Permissions & ACL's"
    Repeat for the other users (leave root alone).
    Quit ResetPassword from the menu,
    Quit Terminal & reboot or you can also select Disk Utility and repair the system permissions again & repair any disk damage that is reported via 'verify disk'.
    Finder may still get part way & laugh at you though .

  • Unable to access time machine backup. The folder "Documents" can't be opened because you don't have permission to see its contents.

    My MacBook Pro with 750GB storage refuses to startup due to a problem with logic board (unfortunately I'm in Singapore and there is no Apple store here and zero customer support).  I'm trying to access some of the files from the time machine back-up using my MacBook Air with 120GB storage, but I'm unable to open the backup.  I receive an error message "you don't have permission to see its contents". Unable to access time machine backup. The folder “Documents” can’t be opened because you don’t have permission to see its contents.
    I don't really want to migrate the data from the time machine to the MacBook Air as I simply don't have sufficient storage space on the MacBook Air.  The iPhoto library which I'm trying to access is 200GB, which is more than the size of the MacBookAir.
    Is there any way I can view the photos and documents stored on the time machine backup.
    Thank you very much.

    When you setup the Mac, you created a Admin user account with say name X
    You ran Migration Assistant and it migrated user Y from the Windows machine.
    User Y has different permissions than User X.
    User X can't normally access User Y's account.
    So what you do is log out of User X via the Apple menu and into User Y, this way you have permission to access the files.
    If you want to transfer files from User Y to User X account
    Transfer files between user accounts on the same machine instructions
    Finder > Go menu > Computer
    A window appears with your boot drive, double click on it to open
    Inside is Users folder, double click to open it
    Inside is your User accounts, double click on the one you want to send files too
    Double click on the Public folder drop the files into the DropBox folder,
    The permissions will change and can be used in the other user account when you log into it and moved to the appropriate folders.
    Applications are typically installed and kept in the Applications folder which is a global access folder all users can access to run them from, but not all users can modify unless they are a Admin user.
    Windows programs won't run on a Mac, but they can be instaled into a virtual machine program that is running Windows.
    Windows in BootCamp or Virtual Machine?

  • The folder "com.apple.TCC" can't be opened because you don't have permission to see its contents.

    I've noticed a folder with a 'no access' sign on it's bottom right corner - com.apple.TCC - and when i try to open it it says "The folder “com.apple.TCC” can’t be opened because you don’t have permission to see its contents."
    Does anyone know what this is and why i can't access it? No-one else uses this macbook but me.
    Also, as of this afternoon, I can't two finger scroll on any web browser?
    Thanks.

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use  another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • The folder "cores" can't be opened because you don't have permission to see its contents.

    HELP, I did something very stupid.  I used my installation disk  and went into the disk utility and change the Volume Scheme to partition  it to 1 volume & named it Macintosh.  The prior hard drive name was possiby Macintosh HD and I renamed it Macintosh (this wiped out all the previous information).  Unfortunately I did not use the Time Machine to backup my information, but I use my Iomega  500GB eGo USB 2.0/FireWire 400/FireWire 800 Portable Hard Drive to backup my information .  I tried to retrieve the backup and it says that I do not have permission since I changed the previous hard drive’s  name.  What can I do to restore my old hard drive information. Shown below is what it shows: The folder “cores” can’t be opened because you don’t have permission to see its contents. Much appreciated if someone could help me.

    I am panicking now and I am so afraid that I lost all my information by what I did.
    Don't be upset. From what you've said, I don't see any reason to believe that you lost anything. You did make a lot of mistakes, though, starting with having only one backup and not testing it.
    I did not use any software when I did the backup.
    Yes, you did. You can't do anything with a computer without using software. Possibly what you mean is that you used the Finder. That's software. Or it may have been something else.
    Hopefully you can help me , but if you can't,  do you think if I contact someone at Apple can?
    I'll try to help you as time permits, but it might make you feel better to make an appointment at the "Genius Bar" of a local Apple Store. They aren't really geniuses and I can't promise they'll help you with this problem, but it doesn't cost anything.

Maybe you are looking for