Can iPhoto 9 display my film rolls like iPhoto 6 did?

Hi,
I've just installed iLife '11 and my iPhoto library is all over the place.
Everything used to be in order by date which was at the right hand side of the title on each film roll but now all the rolls or 'events' as they're now known are displayed as avatars with the date below in small writing. I liked the old way as it was in order and i could manipulate it the way i wanted it.
For instance, i have numerous rolls which contain photos of the same thing but which are all taken at different times and now these rolls are listed by the first photo's date.
I don't want the rolls displayed in this new fashion with a photo from each, i want a long list which i can scroll down and find what I'm looking for then open. It's easier for me to organise my pictures like that. I could add or remove photos to and from different rolls by just dragging and dropping them.
I have several rolls which are added to frequently and edited at the same time.
Is there any way to get round this?
Is there any way to display my photos as a list instead of this photo montage?
Thanks.

Have you looked at Photo view - that basically is how it works
You also can view the library in photos view
And albums and folders are an easier way of doing what you wnat
as to going back - sure - load the backup of your iPhoto 6 library and reinstall iPhoto 6 from the original source
LN

Similar Messages

  • Will Not Display by Film Roll

    I can't figure this out: When I am on the "library" selection, I used
    to see a display of all the film rolls, listed separately. Now all I get is a scroll of photos with no indication of what film roll they are on.
    How do I set the view so I can view the photos grouped by film rolls?

    Hi Bill,
    Actually the same thing happened to me under different circumstances.
    I was dragging a group of five images to a keyword in the keyword panel.
    I dropped them on the keyword and in front of my eyes the library images were shifting. (I have my view set to rolls). When I was done being shocked I discovered all my images were in one roll. This was not acceptable to me as I really like my dated roll organization.
    I had recently done a backup so I dragged out the messed up library and dragged my backup into the Pictures folder.
    I no longer use that keyword panel for keywords. I use the "get info" pop over window to keyword my images.
    I really don't know what your iPhoto Library looks like in the Finder. If you can navigate there and tell me if your images are still in their dated folders, I can tell you what to do from there.
    This is a view of how the iPhoto Library looks in the Finder.
    It is organized by Year folders. Inside the Year folders are Month folders. Inside the Month folders are the days of the Month. Inside the day folders are the photos you took on that day. If you imported video clips and RAW files on that day they will be in an Originals folder. If you have edited any photo imported on that day, the original will be in that folder also.
    If your images are still in their dated rolls in the Finder, then you can get those rolls back, but will lose Albums, keywords, slideshow...basically everything , but you will get your roll organization back.
    You would follow the instructions on Page 2 for the "add to the library" method.
    iPhoto Help
    iPhoto Help 2

  • IPhoto 6: Film rolls disappeared

    is was busy renaming film rolls in the library when for some unexplained reason, the film rolls disappeared & only one enlarged picture is in view for each film roll. I cannot see the thumbnail pics in each film roll. How do i restore how the library shows film rolls? i tried going to View/sortby/film rolls. Nothing changes. Please help

    Thanks TD for your reply. I did drag the slider on lower right corner to the left & yes all my pics are in view & I CAN SCROLL TO SEE ALL BUT...... the PIC ICONS ARE NOT yet listed in individual film rolls with the film roll name. I DID GO TO VIEW/SORT BY FILM ROLL (WHICH WAS ALREADY CHECKED) & STILL NO CHANGE. ANY OTHER IDEAS?
    SIERRASISTER

  • How do you keep film roll data when exporting?

    I'm moving to a newer computer and wanted to transfer my large library to the new setup. I have film rolls organized with original photo dates, but when I import the library in the new iPhoto setup from a hard drive all the dates change to the day I originally imported them by scanning, not the dates of the photos themselves. How can I keep all the film roll data I worked hard on to organize the photos?

    I hope that someone comes along soon to tell you a better way, but in the meantime, here is what I do when I need to reset the date.
    Open an event and click on one of the photos.  Select the 'Photos' pull-down menu and choose 'Batch Change'.  This allows you to change the date for all of the photos in the event. 
    I decided it was too much work to do batch change dates when I moved my photos to iPhoto four years ago so I keep most of pre-DSLR photos in a Picture file outside of iPhoto.  Inconvenient at times, but I don't need to access older photos all that often.  When I do, I just pull a folder of photos into iPhoto and batch change the date then.
    I am sure there must be an easier way; I just stumbled onto this accidentally.

  • Multiple film rolls in source library

    Belated thanks to those who helped me create new film rolls (in August!) Your advice was accurate, but my source library shows no film rolls except 'last roll'(although there are many rolls shown on the hard disk). When I create a new selection of photos in a new film roll it simply makes that selection 'last roll' and I can't rename it.

    Yes, Film Rolls are very flexible. You can drag selected photo(s) into another roll. Don't release the mouse until the roll header is highlighted, and then the photos will drop into that roll. Command-click to add photos to your selection; that's the easiest way to select photos from different rolls at once. When they are selected, drag any one of them to the header of the roll to which you want them added. Or make your selection and do File > Create Film Roll to bring them into a new roll.
    Film Rolls only list chronologically, in ascending or descending order. So if you'd like to tweak the order of your rolls a bit, you can edit the film roll date. It's independent from the dates of the photos, so it doesn't hurt anything to change it.
    Have fun.

  • Need help creating new film roll

    I followed all the instruction in the Help section and still can not create a new film roll--it's grayed out and I am unable to click on it. What is it that I am doing wrong? Please help!

    Are all the Year-based Smart Albums checked?
    Beside the word Library in the Source (or left-hand) is a wee disclosure triangle. Click on it and you’ll see the Year-based Albums. Are they all checked?
    Regards
    TD

  • Film Roll Questions

    Hi - I have a few questions regarding film rolls.
    (1) Is there any way to have film rolls appear in the source pane, or is the only way to get a list of rolls by selecting View > Film Rolls?
    (2) How can I rename a film roll after import?
    (3) How can I re-date a film roll after import?
    Thanks in advance,
    Tim

    Timu:
    1 - the only place to view by film rolls is the main library as you've identified.
    2 & 3 - Yes. Click on the file roll's icon and then go to the Info window at the bottom of the Source pane. You'll be able to edit the title field of the roll and the first date field. The other date fields represent the range of modified dates I believe and cannot be edited.
    Do you Twango?

  • "View Film Rolls" is not Highlighted.... how can I get to it? (iPhoto 6)

    "View Film Rolls" is not Highlighted.... how can I get to it? (iPhoto 6)

    Since you're using the term Rolls you must be running iPhoto 6 or earlier. For future problems be sure you post in the iPhoto 6 or forum.
    For this problem the View File rolls will only Be sure you're clicked on the Library. That menu item is not available in an album or other item. If you have clicked the library icon first and it's still grayed out close iPhoto, delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder and then try again.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Problem with iphoto 6 NOT DISPLAYING FILM ROLLS WITH film roll titles

    i was busy renaming film rolls in the library when for some unexplained reason, the film rolls disappeared & only one enlarged picture is in view for each film roll. I cannot see the thumbnail pics in each film roll. How do i restore how the library shows film rolls? i tried going to View/sortby/film rolls. Nothing changes. Please help
    thanks TD for reply: the slider on lower right did help me see all my pictures BUT still cannot view list of individual film rolls with titles. any other ideas? Was in process of backing up film rolls on CD when the library changed: eliminating film roll view.
    G4 Mac OS X (10.3.x) 10.3.9

    i just kept trying different options with the view menu - restored film rolls with titles.

  • IPhoto5 to iPhoto 6 upgrade: All Film Rolls in 1 Roll Now

    Hi,
    I have an external Firewire HD with my entire iPhoto library on it (over 13,000 photos/11 GB). I have back-up DVDs of each year (1999-2005) that I burned through iPhoto. Prior to upgrading to iPhoto 6 on the FW HD, I placed each folder from off the burned DVDs from IP5 (1999-2005) in the iPhoto library and then when I launched IP6 it asked me if I wanted to make a new library before importing the photos, and I agreed, yes. All the photos were imported, but they are all in one film roll. When I check an individual photo, it appears to still have all the meta-data (including the actual day it was shot). How do I fix this ? I am semi-savvy on OS X, but it appears the semi is the operative word here. I have "View as Rolls" selected under View. After doing a search here and reviewing Lori Diloreto's website (excellent resource-thanks Lori !), I just can't get my head around what I am doing wrong. Any and all suggestions would be greatly appreciated.
    Thanks and regards, Chris

    Do you have a backup copy of your V5 library as before you added the other folders and updated? If so move it into your Pictures folder, moving the other one to the desktop and identify as questionable. Now launch iPhoto and it will tell you it needs to update that library. Your should retain your rolls, keywords, etc. for those photos in the library at that time. Once you have the new V6 library up and running, mount a DVD disk and copy the folders of pictures to the desktop. Now import each folder into iPhoto from there. You should get a new roll for each folder imported. Do that for each disk.
    If those DVD disks are titled iPhoto Library then they are in the iPhoto format and will be imported differently. The will have files in the library folder similar to those in your V5 library folder, thumbail files, data files, etc.
    Again, starting from your old V5 library update just it to V6. Then put one of the DVDs in the drive and it will appear in iPhoto's Source pane directly underneath the Library icon - like this. You can drag that disc icon onto the Library icon to import all of the photos on that DVD disc and you'll keep keywords, comments, rolls, etc. intact. Do that for each disk.

  • Help moving iPhoto 6 Film Rolls to iPhoto 11

    Hi,
    So I'm trying to get my new MacBookPro up and running with all my previous iPhoto images. However it's not so simple as I would have hoped... my scenario is as follows:
    I have an old MacBookPro (6years old) running iPhoto6 with all my existing photos organised in Film Rolls.
    I have a new MacBookPro running iPhoto11, which I would like to move all my photos over to.
    I have copied the old 'iPhoto Library' folder onto my new laptop into my Pictures folder, and then opened iPhoto. It converted the iPhoto Library to be compatible with iPhoto 11, but didn't find any new photos. After some searching, I found out that opening with cmd-option gave me a few options. I have tired 'Repair Database' option, and it then found my photos (all) but refused to import about 10k saying they were not compatible (?).
    So I now have a large number of my photos in the new version of iPhoto. But I would
    (a) like to have all of them imported, and
    (b) like to have them imported in albums/rolls or some order (rather than effectively a singular large collection) given that I have about 10 years of photos and numerous rolls from various shoots.
    Please can anyone help me? Is there some software that I can use to import the photos from an iPhoto 6 Library into iPhoto 11? I am dismayed that Apple appear to have left me in a complete and utter mess with this!
    I simply want to be able to view my photos in iPhoto 11 in an ordered fashion, based on the order I had created in iPhoto 6 using Film Rolls.
    Thanks,
    Robert

    Try this:
    1 - copy the iPhoto Library from the old MBP again and place in the Pictures frolder.
    2 - download and apply the iPhoto Library Upgrader 1.0.
    3 - launch iPhoto 11, select the library and let it update it again.
    OT

  • Can I Modify Film Rolls???

    I'm viewing my iPhoto Library sorted by Film Roll. I've found a ton of single shot rolls. What I'd like to do is combine these rolls together, but clicking and dragging is not working. Is there a reason why rolls can't be modified?
    iMac G5   Mac OS X (10.4.6)  

    Gryphen:
    Welcome to the Apple Discussions. Just Command+click on the icons for the roll's you want to move and drag them on top of the icon for the destination rolls. That will move all the photos into that destination roll and delete the rolls selected and moved.

  • How can I change the order of photos in a film roll?

    I've scanned in images and then imported them to i-photo and they are not in order on the film roll in i-photo. Does anyone know how I can re-order them within the roll?
    Thanks
    Ruth

    There's only two way to arrange photos in the roll itself while having the rolls visible in the organize window. They are last file created first or last file created last.
    You can create an album of that roll and then arrange them manually, by date, by file name. If by date or file name and you want them sorted alphanumerically or chronologically you'll have to make sure the check box, "Place most recent photos at the top" is unchecked in the iPhoto Preferences/Appearances pane.
    OT

  • Sort by film roll in iPhoto 8

    Come across an interesting problem.
    A friend has a digital camera that resets the time and date every time the battery is charged, and not surprisingly after a while no longer bothers to re-enter the details, hence the date is always sometime in year 2000.
    This has never been a problem as iPhoto sorted the pictures by film roll, so there was always a semblance of order. I must add that the original titles of the image number have been changed to descriptive picture titles.
    I have just helped them to import their picture library onto the shiny new MBP, 10.5.5, iPhoto 8 (having told them how fantastic events is) and it has turned into a can of worms. All the images are now sorted by date order which means they are all over the place, and arrange by filmroll is no longer one of the options.
    Anyone any ideas? Is there any way to get import pictures from iphoto 6 without it reformatting for events, or can i get iPhoto 8 to sort by iPhoto 6 filmrolls?
    Thanks

    Yeah the iPhoto 6 library is still on their old laptop, so that could work.
    Do you know whether importing into iPhoto 8 would then keep that same film roll order, with over 6,000 pictures they are quite keen to keep a semblance of continuity.
    You do NOT import the library
    You must use iPhoto 6 on the laptop and rename any rolls - any roll that uses the default name of rollxxx will come across as an unnamed roll and it gets very confusing in iphoto '08 - once you have an iPhoto 6 library with no default named rolls in it quit iPhoto on both systems and drag the iPhoto library on the new computer to the trash and then drag the iPhoto 6 library from the laptop to the pictures folder on the new computer and launch iPhoto there - this will convert the library and keep the iPhoto 6 roll structure
    The event order may be an issue since it is time based - there is a command under the photos menu to batch change date and time so you can use iPhoto '08 to restore the desired date structure
    LN

  • IPhoto 6 conversion results in lost film rolls

    I just upgraded to iPhoto 6 from iPhoto 5.x. My iPhoto Library contains more than 5000 photos. The conversion process completed successfully and all my photos and albums appear to be there.
    However... about half way down the list of photos (at Roll 375 of 414), the Library conversion process apparently lumped dozens of my film rolls together into one gigantic roll with 1700+ photos. Then.. it continues on with rolls correctly allocated to the end of the file (roll 414).
    Anyone have any idea what is causing this flaw in the conversion process? And more importantly... is there anyway I can get my film rolls back?
    BTW... 'Film Rolls' is selected under the View menu, and toggling it on/off does not solve the problem.
    John

    Ok. after first panicking and not reading further on how to fix iphoto, i calmed down and did the reading i should have done first. Seems that holding down the option and command key at iphoto boot-up initiates a rebuild command.
    I did a complete rebuild and all the photos are back in order. Not sure why this occurred but I'm happy that it was fixable.
    Iphoto rules.

Maybe you are looking for

  • Can I return my iphone back if I had an approved service apple?

    Can I return my iphone back if I had an approved service apple?

  • Ftp/networking with uverse

    So back in June I had an issue with my ftp not being able to reach servers while on my home att uverse network. Archived here: http://discussions.apple.com/thread.jspa?threadID=2048726&tstart=180 After several weeks of restarting the att wireless rou

  • Message box in MVC 3

    Hi there, I have a login function on my website, which is working fine. But when the password is incorrect, I want some sort of message box to notify the user that the password is wrong. How can I accomplish this in MVC 3 (using C#)? Thanks, Amy

  • Import .atmo/.aer files

    Does anyone konw if it is possible for Adobe Acrobat 3D to import .atmo/.aer files produced by Adobe Atmosphere (now discontinued), embed the Adobe Atmosphere environment in a PDF document and have the reader be able to view the 3D environment withou

  • JPY Currency problem

    Hi all, I have created an Import PO with rate 62500 JPY (decimal places are are not allowed in PO), But in table level the rate is stored as 625.00 (with 2 decimal) due to which during GR goods are validated for 625.00 instead of 62500. Kindly sugges