Can IPS and AntiBot work in Active - Active Mode

Hi,
When we propose two firewalls in Active - Active mode with IPS module and Anti-Bot Licences, will the firewall along with IPS and Anti-Bot work in Active - Active mode? If not, how do the other OEM's claim that they are able to run their UTM in Active- Actvie Mode.

Hi,
I haven't seen any type of limitation with IPS and Botnet Traffic filtering on Multiple context mode; so it should work fine.
Luis

Similar Messages

About IPS and its working

i want to know in detail about IPS and its working.Also is it using artificial intelligent or neural network for self upgrading reason.

No, the sensors are not intelligent. They will very happily sit there dumb until updated manually.

FTP client is not working in active mode

Hi,
I have a ftp issue trying to download iweb files.
My provider enabled me a ftp access.
I tried to connect to it with transmit or rbrowser ftp client (passive mode disabled). The connection works well but i can not retrieve the list of files.
However using my PC and filezilla ftp client in active mode, the connection did work properly.
Any idea to help make this connection work on my mac ?
Thanks

Perhaps this will help...
http://slacksite.com/other/ftp.html
"The main problem with active mode FTP actually falls on the client side. The FTP client doesn't make the actual connection to the data port of the server--it simply tells the server what port it is listening on and the server connects back to the specified port on the client. From the client side firewall this appears to be an outside system initiating a connection to an internal client--something that is usually blocked."

Satellite L300 - can headphone and speakers work simultaneously?

I have a Satellite L300 with self-installed Windows XP (Realtek Sound Driver 5.10.0.5559 from Toshiba website).
Plugging the headphones turns the speakers off. I want that speakers and headphones working simultaneously. What can I do? Thank you for help.
Sincerely H. Reinhold

Thank you for your answer.
1. I think, it is not a "mechanism in the headphone jack", because if I plug the Headphone, the speakers turn off not immediately but a short time later. So I think it must be a software action.
2. "But why do you want to have both of them working simultaneously?"
I want to trigger an electronic control when a sound signal is starting and parallel I will hear the sound. If the headphone speaker switching would be a software action, I need no external speakers, as you have suggested. A change in the configuration is always the most elegant solution. That's why my asking.

Standard workflow report to monitor each and every work flow activity

hi experts,
Is there any standard report or table which gives the status of workflow activity.
i.e., approved/rejected/person responsible...etc..
Kindly give some suggestions.

SWI1                       Selection report for workflows
SWI2_ADM1            Work Items Without Agents
SWI2_ADM2            Work Items with Deleted Users
SWI2_DEAD            Work Items with Monitored Deadlines
SWI2_DIAG             Diagnosis of Workflows with Errors
SWI2_DURA            Work Items by Processing Duration
SWI2_FREQ            Work Items per Task
SWI3                      Workflow Outbox
SWI5                      Workload Analysis
SWIA                      WI Administration Report
If you have workitems,
SWF_APPL_DISPLAY : Analyze Application Log
SWDP : Workflow Log

Can keyboardEvent and mouseEvent work in the same .swf file?

I'm nowhere near an expert on Flash or action script, so this is probably a simple thing to solve. But so far I haven't figured it out.
I put together a rather simple interactive .swf file using graphical "buttons" to navigate through different screens. Afterwards, I was told to add in two keyboard events as well: one to navigate to the next screen and one to restart the .swf file.
Using the keyboard to navigate the way I explained above works fine--that is, until I use the mouse to click on a button. Once I do that, the keyboard events no longer work. For example, if I start off the .swf file by pressing the Space bar on the keyboard to navigate to another page, it works fine. If I then press the "R" key on the keyboard to restart the .swf file, that works fine as well.
However, the first time I click on one of the buttons on the stage to navigate to another screen, the keyboard events no longer work. I can press the Space bar, and nothing. I can press the "R" key to restart the .swf file, and nothing. It's as if using a mouse event disabled the keyboard events or made the .swf file stop "listening" for keyboard events. The only way I can get the keyboard events to work again is by clicking somewhere on the stage and THEN pressing the appropriate keyboard key. I'm guessing that's because I put the focus back on the stage, maybe?? (again, not an expert here)
My code is ridiculously simple, and it's on the first frame:
stage.addEventListener(KeyboardEvent.KEY_DOWN, onKey);
function onKey(event:KeyboardEvent):void
    if (event.keyCode == Keyboard.SPACE)
        gotoAndPlay(currentFrame + 1);
     if (event.keyCode == 82)
        gotoAndPlay(1);
Is there anything I need to do to this to make sure the .swf file is always "listening" and registering the keyboard events?
Thanks..

use:
trace("defined");
stage.addEventListener(KeyboardEvent.KEY_DOWN, onKey);
function onKey(event:KeyboardEvent):void
trace(event);
    if (event.keyCode == Keyboard.SPACE)
        gotoAndPlay(currentFrame + 1);
     if (event.keyCode == 82)
        gotoAndPlay(1);
test by clicking one of your buttons and watching the output panel for "defined". if you don't see that, you're not defining a keyboard listener when that button is clicked. if you do see it, then click a keyboard key. (if you're testing in the flash test environment make sure you disable keyboard shortcuts.)   if you fail to see the keyboardevent trace, you're removing or disabling your listener after it's defined.

Can CDMA and GSM work at the some time on iPhone 4s

I am currently using two phones right now (work/personal). I was thinking about getting Sprint CDMA(iphone4s) for one line and using its unlocked GSM for the other line! so that I don't have to carry 2 phones all the time. Do you guys think it will work???

As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

Can Imac and Mini work side by side?

I have an Imac G3 333. Since I am out of the loop in terms of support for OSX I was considering buying a Mini and connecting the two via ethernet or phone cable, using the Mini for my startup volume and the Imac for the monitor. Is this that simple or am I missing something.

Your iMac cannot be used as a monitor for Mini. I wish it was the case.

Blue Screen and Not working still in recovery mode after ios 8.1.3 update?

I have an iPhone 5s ,I was update I os 8.1.3 when reboot and still in recovery mode ,Then i was connect to iTunes restore when iTunes show error "27"
it show this message "The iPhone "iPhone" could not be updated.An unknown error occurred (27)"
please help me...please
<Personal Information Removed by Host>

Hello kopyk001,
I'm sorry to hear you are having issues with your iPhone. If you are having issues restoring your iPhone from iTunes and are getting an error message, you may find the information and troubleshooting steps outlined in the following articles helpful:
Resolve iOS update and restore errors in iTunes - Apple Support
Resolve iOS update and restore errors - Apple Support
Sincerely,
- Brenden

Inserting Images and Logos - works in the edit mode, but does not save nor show in final PDF format - help?

I have tried several times - but when I load a logo or image in to a form template - it shows up on the template in edit mode but when I save it for PDF final format and use - the image or logo disappears. What I am doing wrong?

Is this a form that you're creating in FormsCentral?

I get a no service msg and a USB connected to itunes icon on the home page. How can i get past this so i can access and unlock my phone?

i get a no service msg and a USB connected to itunes icon on the home page. How can i get past this so i can access and unlock my phone?

DFU Mode / Recovery Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808

My Macbook Pro keeps freezing/crashing after a few seconds of use, but works fine in safe mode.

I've researched this extensively, but I haven't been able to solve my problem yet.
It started completely out of the blue with a kernel panic, where my screen seemed to malfunction and I got the kernel panic message (but I could hardly read it because of distorted graphics). I forced my laptop to shut down, but every time I rebooted and used it again it would completely freeze after a while (the amount of time varied, it has lasted from a few seconds to a couple of hours). What happens essentially is that the cursor and entire OS freezes, and I'm unable to click on anything or use the keyboard. The fans start working full speed and the only thing I can do is force the laptop to shut down.
At first I thought it was a Chrome problem because it only happened after I opened the browser. After uninstalling it, the laptop seemed to work fine for a couple of hours, but then it froze again while I was using Safari. Ever since it has been functioning normally for smaller and smaller time periods before freezing again. I've tried reinstalling Snow Leopard OS from the original disc and then downloading all software updates, but the problem continues. I've also tried doing a hardware test by pressing D as the computer starts up, but for some reason it doesn't work.
The laptop, including Chrome and Safari, works fine in safe mode.
I'm sorry I don't know what specific information to give you about my laptop/OS, but please ask anything you need to know. I'd greatly appreciate any help — I'm panicking because I fly to England tomorrow morning to start university and I really don't want to go without a laptop for 2 weeks while it's getting fixed!

Thanks for your reply! Here are the Etrecheck results.
Hardware Information:
          MacBook Pro (15-inch, Early 2011)
          MacBook Pro - model: MacBookPro8,2
          1 2 GHz Intel Core i7 CPU: 4 cores
          4 GB RAM
Video Information:
          AMD Radeon HD 6490M - VRAM: 256 MB
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:51:36
Disk Information:
          ST9500325ASG disk0 : (465.76 GB)
                    (null) (disk0s1) <not mounted>: 200 MB
                    Macintosh HD (disk0s2) /: 465.44 GB (339.98 GB free)
          MATSHITADVD-R   UJ-898
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple, Inc. MacBook Pro
Kernel Extensions:
Problem System Launch Daemons:
          [not loaded] org.samba.winbindd.plist
Problem System Launch Agents:
          [failed] com.apple.Kerberos.renew.plist
Launch Daemons:
          [not loaded] com.adobe.fpsaud.plist
          [not loaded] com.google.keystone.daemon.plist
          [not loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [not loaded] com.divx.dms.agent.plist
          [not loaded] com.divx.update.agent.plist
          [not loaded] com.google.keystone.agent.plist
          [not loaded] com.hp.devicemonitor.plist
          [not loaded] com.hp.messagecenter.launcher.plist
          [not loaded] com.quark.quarkupdate.agent.plist
          [not loaded] net.culater.SIMBL.Agent.plist
User Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [not loaded] com.facebook.videochat.elenicourea.plist
          [not loaded] com.spotify.webhelper.plist
          [not loaded] net.infinite-labs.SIMBLEnablerForSandboxedApps.plist
User Login Items:
          Flux
          GrowlHelperApp
          iTunesHelper
          Flux
          The Lion King Circle of Life.mp3
          Dropbox
3rd Party Preference Panes:
          Flash Player
          Flip4Mac WMV
          Perian
Internet Plug-ins:
          AdobeAAMDetect.plugin
          DirectorShockwave.plugin
          DivX Web Player.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          googletalkbrowserplugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          npgtpo3dautoplugin.plugin
          o1dbrowserplugin.plugin
          OVSHelper.plugin
          QuickTime Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
          Picasa.plugin
Bad Fonts:
          None
Top Processes by CPU:
              44%          Google Chrome
              28%          WindowServer
              10%          EtreCheck
               7%          syslogd
               2%          hidd
               2%          Bluetooth File Exchange
               1%          fontd
               0%          Finder
               0%          SystemUIServer
               0%          JavaApplicationStub
Top Processes by Memory:
          210 MB             Google Chrome
          111 MB             JavaApplicationStub
          57 MB              Finder
          49 MB              Dock
          42 MB              Google Chrome Helper
          41 MB              SystemUIServer
          41 MB              WindowServer
          41 MB              Bluetooth File Exchange
          41 MB              quicklookd
          41 MB              EtreCheck
Virtual Memory Statistics
          382 MB             Free RAM
          1.01 GB            Active RAM
          518 MB             Inactive RAM
          2.10 GB            Wired RAM
          461 MB             Page-ins
          364 KB             Page-outs

I make Rest for iPad, and now every time i open it , i chose the country and the network and tells me he works the activation and then tell me the iPad could not be activated, try again what can i do

i make Rest for iPad, and now every time i open it , i chose the country and the network and tells me he works the activation and then tell me the iPad could not be activated, try again what can i do

Those are the instructions for your computer's iTunes (i.e. using the Store menu at the top of your computer's iTunes and selecting 'View My Account' on it). If you are doing it on your iPad then are you following the instructions for iOS devices :
To unhide your purchases
Depending on the content type, open the App Store, iBooks, or iTunes Store on your device.
Scroll to the bottom of the main page.
If you're not already signed in, tap Sign In.
Tap your Apple ID name, then tap View Account.
Scroll down on the Account pane, and tap Hidden Purchases.
Locate the item you would like to unhide then tap the Unhide button.

My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay in store?

My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay for repairs in store because I didnt get the Apple care plan when I purchased it. Sprint said it may be a phone problem not sure if I should take it to Sprint or Apple...I just need my phone

I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

InDesign CS5 is not opening after deactivation/activation. How can I fix this? Illustrator and Photoshop open and are working fine. Please help!

InDesign CS5 is not opening after deactivation/activation. How can I fix this? Illustrator and Photoshop open and are working fine. Please help!

First of all, thank you for replying so promptly to my posts this morning!
I can't remember how I got the software on his computer, but I'm pretty sure it wasn't through migration assistant.
I was looking into doing an uninstall of InDesign and a fresh install. However, I initially downloaded the CS5 suite digitally and I can't find out how I am able to perform a fresh install of InDesign. Do you know where I find this info or gain access to download just InDesign again? I can't seem to find anything in my Adobe account that shows where I might do another download.

Can IPS and AntiBot work in Active - Active Mode

Similar Messages

Maybe you are looking for