Can iron port supports auto mail reply for external domains

Hi everybody,
We have a requirement, that our mail security gateway (ironport) should be configured in such a way that it should send the automatic mail reply for the external domains.
Can any one suggest, It can be configured or not....Post any related article..
Thanks
Siva

Hello Siva,
There are some details that would be needed, to understand if you intend to send auto-replies to external domains or to senders that are sending to those domains. The example below will automatically send a notification to the sender, to confirm receipt of the message. This based on the recipient addresses. Typically used for requests for info from websites etc.
Assumptions for this filter:
Public listener name = InboundMail
Rcpt to = [email protected]
Subject Line for notification = "Receipt for message:" with the original subject line ($Subject).
Reply to address for the notification = [email protected]
Template for notification body "AutoRespond_Info" already exists
Considerations:
If there are a number of mail rcpt addresses that require the same notification, consider using a dictionary rather than specifying them in the filter itself.
Filter:
AutoRespond_Info: if ((recv-listener == "InboundMail") AND (rcpt-to == "[email protected]")){
notify ("$EnvelopeFrom", "Receipt for message: $Subject", "[email protected]","AutoRespond_Info");
Regards,
-Jerry

Similar Messages

How can I disable the Junk mail folder for an email account?

How can I disable the Junk mail folder for an email account?

Hi scottyfrank68,
Junk mail filtering can be turned off by going to the Mail menu > Preferences > Junk Mail pane and unchecking the box Enable junk mail filtering. See this article -
Mail (Mavericks): Junk Mail preferences
Thanks for using Apple Support Communities.
Best,
Brett L

Hi, Dear. I purcahse my iphone 4S on of the guy, my problem is when i update any app from App store and i click update there is an e-mail address is coming which i doesnt know about the password, how can i revome the e-mail address for update our apps.

Hi, Dear. I purcahse my iphone 4S on of the guy, my problem is when i update any app from App store and i click update there is an e-mail address is coming which i doesnt know about the password, how can i revome the e-mail address for update our apps.

Yes. Delete the Apps that were not Purchased using Your Apple ID.
But a Restore as New is the way to go.

Can I have automatic e-mail setting for ADDM and AWR reports??

Can I have Automatic e-mail settings for all my AWR and ADDM reports so I don;t have to run the reports all the time but they can be sent over to my mailbox and I can review them, if at all I can do that then can I bound them to a particular time frame where I can recieve only those reports durin the peak usage of my database.
thanks

Hi Rohan,
Can I have Automatic e-mail settings for all my AWR and ADDM reports so I don;t have to run the reports all the time but they can be sent over to my mailbox and I can review them,You bet! I do it for all of my databases:
1 - Use a cron (or preferably dbms_scheduler) to schedule the awrrpt.sql execution, directing the report to a fixed file location (e.g. /tmp).
2 - As step 2 from the scheduled task, direct the report as input to sendmail:
For Windows:
http://www.dba-oracle.com/t_e_mail_interface_windows.htm
For Linux:
http://www.dba-oracle.com/t_email_mailing_messages_plsql.htm
For complete details of job scheduling, see Dr. Hall's book "Oracle Job Scheduling":
http://www.rampant-books.com/book_2005_1_scheduling.htm
Hope this helps. . . .
Donald K. Burleson
Oracle Press author

How do I/Can I define the interval Mail checks for new email?

How do I/Can I define the interval Mail checks for new email?
Thanks
Glyaflya
iPad 16G/3G ios 4.2.1

Settings > Mail, Contacts, Calendars > Fetch New Data

Can one itunes support 10 different iphones for backup

Can one itunes support 10 different iphones for backup on a windows pc.

If you are going to sync multiple phones to iTunes in the same user account, you want to be careful if you are going to sync contacts with Address Book (Windows Address Book/Contacts folder if you are using Windows) under the "Info" tab in iTunes . What can happen is the syncing process will take the contacts from both phones and then merge them together. This will cause both phones to have all of the contacts from each phone and it can be a hard thing to recover from when it happens. Best advice is to create two seperate user accounts on the computer and sync each phone to its own unique user account. This way you get a seperate Address Book (or Windows Address Book/Contacts folder in Windows) for each phone.
Hope this helps,
- Greg

Not send mail for external domains

Hi,
I have installed OCS 10g(10.1.2) in linux. All components ok, but i not send mail for external domain.
Att,
Mesti

I remember in version 9.0.2 that i configure in SMTP_OUTBOUND the IP of DNS external to send mail for other domains.
Mesti

Where can I find a overview of symbols for extern textfields?

Where can I find a overview of symbols for extern textfields?
For exmaple " = %22 etc.
Many thanks!

Thanks kglad! That's the woord I was looking for. I get a
problem with ë = %eb He still gives a square symbol :S . Are
you familiar with the problem?

After installing Lion the microsoft office programs do not run! What can I do as I need them for external communication?

After installing Lion the microsoft office programs (word, excel,...) do not run! What can I do as I need them for external communication?

There are also free alternatives such as Neo Office.
You can also install the Office 2011 30 day trial if it's urgent.

TS2776 I can't find an e-mail address for Apple Support. I spoke to an Apple Support Advisor named Barbara, on July 7th (over a month ago) and she said Apple was "working on my problem and would call back". Help!!!!

See above
<Title Edited by Host>

There is no email address for Apple Support, since Apple does not provide support via email (except for the iTunes Store). You will need to call Apple support and ask for further assistance.
By the way, everyone here is just a fellow user, so posting any personal details here including case numbers is a bad idea.
Regards.

SMTP+Iron port out going mail issue

Hi,
One of the EBiz instance is configured with Iron port SMTP server for outgoing workflow mails.
Th IRONPOrt mails are relayed using round robin technique.
From the EBiz server OS if i fire mails the mails mails are relying using the round robin technique but from Oracle if i am firing some test mails all of them are relying though only smtp server where the scenario should be both the Iron port server should fire mails in a round robin fashion.
Just want to know if there is anything from Ebiz notification mails side we need to take care.
Ajay

Outgoing mail shouldn't be using port 993, that's an incoming mail port (IMAPS). Outgoing should be using either port 25, 587, or in some cases, 465.

In Mavericks Mail, I can't select multiple e-mail addresses for an individual e-mail. I don't want to hand select hundreds of e-mail addresses.

In Mavericks' new e-mail program, I cannot select multiple e-mail addresses for an individual e-mail without having to re-open the address book for every e-mail address I am opening. Please help.

The new but not-ready-for-prime-time autocomplete method searches for matches that contain the entered text, not just ones that begin with the string. Your options are:
1) type in longer strings that narrow the search
2) use an add-on to search just the beginnings:
https://support.mozilla.org/en-US/questions/1037469
3) install an older version of TB:
http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/

How Can I Turn OFF Junk Mail Filter for IMAP Accounts Only?

I am trying to figure out how to turn off the Junk Mail filtering for IMAP accounts such as .Mac/.ME and GMAIL. All filtering is working fine on the server side, and reviewing the mail that is tagged is easy enough by just going to the account and displaying the folders created on the server.
I've checked the Junk mail pref and although the Advance settings let you isolate specific accounts to check, it does not give you the option bypass checking an account.
i.e.
if <Any> of the following conditions are met:
<Account> <is not> <Gmail (IMAP)>
As is, the mail rules are working perfectly on the server side, but in Apple Mail, many mails are being sent the Apple Mail's Junk folder.
When going through the Gmail's instructions on setting up a Gmail account for Apple Mail, it specifically says to turn off Junk mail filtering for the account, but I can't find any options to do that.
Any help or suggestions would be greatly appreciated.
TIA

I haven't tried this, but it should work:
Make a new rule,
If <Any> <Account> is <Gmail> or <Account> is <.me> then "Stop evaluating rules".
Move this rule to the last in the list of rules.
In the Junk Mail preferences, be sure that "Filter junk mail before applying my rules" is unchecked.

Disabling junk mail filtering for specific domains

I have a situation where I am getting dozens of messages from individuals all in a specific domain, and all are good messages which I want in my inbox; Mail however thinks they are all junk and moves them to the junk folder. They are NOT brown so I cannot select them and say they are not junk mail, they look like regular email. These are from people I do NOT want in my address book yet they are messages I need to respond to.
How can I tell the junk mail filter that massages from a given domain should not be filtered? In short, I want just the right-hand-side of the address, the domain component, to be given the OKAY!
Thanks - Lawrence

Thanks - I tried the advance tab but could not see how to specify a domain but now I look again I see that there is a way - I think. But Kappy, what you say tells me something I did not know: I thought that filters, rules, et al, were applied when a message is in the inbox - but I have this wrong I think. If I read your reply rightly - the message is examined for junk filters, rules, et al, BEFORE it gets assigned to ANY mailbox! Am I right? This is how your suggestion would work. So I can have an initial rule that simple uses a list of approved domains - and sticks anything from such a domain into the inbox where no more filtering or rule analysis will take place. And the more I think about this, the more it makes sense.
Thanks - Lawrence

Can i set a node manager serve for 2 domain on one machin??

My question is simple.
I installed webcenter suite and soa suite in a machine using difference linux user and difference middleware home.
and I want to set a node manager server for two domains (soa_domain and webcenter_domain).
Is is possible?
When I tried to register domain list in node manager domain list using nmEnroll() of wlst, it failed.
please check following logs in 7101 is admin server port of soa domain and I ran node manager on webcenter domain.
Thanks in advance.
BmW.
~~~~~~~~~~~~~~~~~~
wls:/offline> connect()
Please enter your username :weblogic
Please enter your password :
Please enter your server URL [t3://localhost:7001] :t3://localhost:7101
Connecting to t3://localhost:7101 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'soa_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> nmEnroll('/u02/app/soa11g/middleware/user_projects/domains/soa_domain', '/u02/app/wc11g/middleware/wlserver_10.3/common/nodemanager');
Enrolling this machine with the domain directory at /u02/app/soa11g/middleware/user_projects/domains/soa_domain ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 1447, in nmEnroll
File "<iostream>", line 1848, in raiseWLSTException
WLSTException: Error occured while performing nmEnroll : Problem enrolling the machine. : /u02/app/soa11g/middleware/user_projects/domains/soa_domain/config/nodemanager/nm_password.properties (Permission denied)
Use dumpStack() to view the full stacktrace
wls:/soa_domain/serverConfig> exit();

you might be victim of the "node manager starts WL Server with same Unix user id that was used to start Node Manager itself" problem
see here http://forums.oracle.com/forums/thread.jspa?threadID=2184607&tstart=89
I have been looking everywhere for a simple way to tell Node Manager to use a different Unix UID,
anybody any clue?
here http://download.oracle.com/docs/cd/E12840_01/wls/docs103/nodemgr/overview.html the Node Manager doc page

Can iron port supports auto mail reply for external domains

Similar Messages

Maybe you are looking for