Can Ironport support 2 different servers within 1 domain?

Hi All,
The situation is:
Our company's Ironport is using firmware AsyncOS 7.6 and currently is connected to Lotus Notes Server.
However, we are now planning to add 1 more mail server - MS Exchange.
The questions are:
1. Is it possible to connect both Notes and Exchange with 1 domain only?
2. If yes, can we set some filtering to seperate then the incoming email can fall into the designated server?
3. How can we achieve connecting 2 different servers under 1 domain?
Please give any other comments if you have. Thanks!!
Thanks and Regards
Krav

Krav,
You should be able to do this. However, a curious question, are you planning to migrate off of Lotus notes or is this going to be a permanent solution? Are the mailboxes for both mail servers going to be the same (maybe clustered).
1. Yes, you can have multiple servers assigned to a domain, by specifying the ip address as an additional entry in SMTP routes.
2. This may prove to be the big issue. There is no filtering mechanism that can distinguish lotus notes bound mail from exchange bound mail. For example; if you set both the servers with the same priority in SMTP routes they will round robin, meaning some mail will goto Lotus notes and other mail will goto Exchange. So if this is just to test, you can possibly use the priority option in the SMTP routes. However, this may also be more of a question as to whether you could cluster an Exchange and lotus notes server, which is beyond my understanding.
3.In the SMTP Routes section click on the domain and add in the ip address of the other server. Be mindful that if you keep the priority the same, mail will round robin between the devices. However if you set the first device to 0 and the second device to 10, mail will primarily goto the device with the 0 priority. You will also need to specify the ip address of the second server in your HAT table, if you are using the Relaylist.

Similar Messages

  • Can ACS support multiple Active Directory Domains for 802.1x EAP-TLS?

    Hi
    I'm looking to implement ACS 5.2 using 802.1X, we have two seperate AD domains.
    Now.. this is the tricky part...
    A single switch will need to support both ADs, so if a machine in AD1 is connected, it will be authenticated to the ACS using AD1 and applied to VLAN1, while a machine that is in AD2 will be authenticated to AD2 and applied to VLAN 2.
    I'm looking at machine authentication, not user authentication, so I assume that I will need to import two certs from each AD.
    Can any expert please let me know if they think that this will be possible please??
    Many thanks

    Yes ACS can support multiple AD domains but you will have to configure one as your AD domain and the other as an LDAP database and this will work since you are planning to use eap-tls.
    The question I have is which version of ACS are you using? If you are using ACS 5.x then you can setup and identity store sequence so if the user is not found you can move to the next store and this will prevent you from installing two certificates on every machine.
    You can then setup an authorization rule for the seperate containers on where the workstations are located (this is assuming machine authentication is being used) for the AD database or the LDAP database and then assign the vlan based off that.
    Thanks and I hope this helps!
    Tarik Admani

  • Different Layout within a webflow for one Portal Page

    Hi All,
    Can I set different layouts within one portal page journey depending on the hyperlink
    I click on one of the portal page with in a webflow.
    My requirements is such that if user clicks on one of the link on one of the portlet,
    I want to show them the next page with different content in a different layout
    with in same portal page journey.
    Can anyone post the sample code to achieve this.
    Thanks
    Nitin

    1 - you can not change the photo frame size if that is what you are asking
    2 - you can enlarge the photo within the frame by selecting it and using the slider above the frame
    3 - you can use a different page layout -- or even theme -- see Liz Castro's web site for examples of all available layouts for each theme -- http://www.lizcastro.com/iphotobookthemes/
    LN

  • How can two independent DirectAccess servers be set up safely in the same domain?

    I've got a single-tier certificate authority running on a 2008 r2 domain controller with an expiring root certificate. I have a new 2012 r2 domain controller with a new single-tier certificate authority. I also have a DirectAccess server running on 2012
    server (two NICs, NAT, IP-HTTPS only). I'd like to get a new DirectAccess server set up running server 2012 r2 using the new CA for the various DirectAccess server and client computer certs. I can get the new environment working and flip machines from
    the existing implementation to the new implementation.
    I was previously told by a tech working one of my Microsoft support tickets that two independent DirectAccess servers can't run in the same domain. However, I posted a related question
    https://social.technet.microsoft.com/Forums/projectserver/en-US/ab53a314-91ea-4d40-afd5-6b8f62698547/2012-directaccess-and-expiring-certificate-authority?forum=winserverNIS and got a response indicating that two independent DirectAccess servers can run
    in the same domain. If I can carefully get a second server operational within the same domain, I can build a reg file to deploy to all machines prior to the cutover that will simulate the gpupdate for broken machines in the field, getting them connected so
    the policy can be properly pulled from a DC. Would anyone else be willing to confirm or elaborate on operating two independent DirectAccess servers in the same domain? What are the gotchas?

    Hi,
    Yes you can have 2 Da deployments in one domain.
    I have done this a number of times for customer when upgrading from UAG DA to 2012.
    Make sure you use different Group policies for the DA servers and Clients. make sure you target the client with only one GPO at a time. Also use different AD groups.
    You then change the GPO assignment to the clients and they will flip when the client does a gp update. I have done this for a site that had over 5000 clients and we didn't have one call about it.
    You can use DirectAccess Offline Domain Join for any broken machines.
    https://technet.microsoft.com/en-gb/library/jj574150.aspx
    Regards, Rmknight

  • Front End servers within same Pool on different subnets

    The customer is looking to have Amazon AWS host Lync 2013, and despite Lync 2013 having built in HA via Pools, Amazon wants to split the Pools across two of their availability zones (AZ ). An AZ is nothing more than a metropolitan area network, or simply
    a data center located a few miles away. Essentially they want to split the Pools between their two AZs.
    I know that for Lync 2013, the only stretch Pool supported is the Persistent Chat server Pool, and that Front End Pools, Edge Pools, or Mediation Pools are not supported.
    Amazon states that the latency between their AZs is from 1 - 5 ms, which is well within tolerance, though they state that the AZs all have unique subnets.
    I know that none of this is supported, though I am being requested as to why it isn't.
    Forgetting about latency, is this not supported because all servers within a Pool must share the same IP subnet? Is this coded within Lync that only Pools within the same subnet will work? I think it is as with Lync 2010, a stretched VLAN was required for
    a FE Pool to work, which implies the same subnet.
    While on this, a Central site does not mirror that of an AD Site, where a Central Site is a reflection of Pools within an area. So can a Central Site span two AD sites? I believe the answer is yes when one considers that a remote branch office can also be
    its own AD site. The reason for asking this question is I am attempting to see if if the Central Site might also have something to do as to why stretched Pools aren't supported.
    Thanks!
    Christian
    Christian Frank

    Hi Guys,
    Just saw both of your responses. I totally agree that it isn't supported, and what Amazon has been proposing is essentially adding their HA via a redundant AZ so that their infrastructure is redundant, which is their HA (I don't agree!).
    What I am looking for is something a bit deeper as to why. For example, when Lync 2010 had the stretched FE Pool between two locations, it was done via a stretched VLAN, which implies that the servers on both ends must be on the same subnet.
    Amazon wants to stretch all the Pools, between their data centers, so they can say that the Lync infrastructure is highly available, though at each data center, the subnets will be different, and that is what I am attempting to validate.
    I know this isn't supported, though is it because the members within the pool would come from different IP subnets, and Lync 2013 is coded to expect fellow members to be within the same subnet? That essentialy is what the case of Lync 2010 FE Pools was when
    they stretched them. And if you go back to Exchange 2007, stretched VLAN was back then a way to create geo-clustering also, which is no longer the way.
    Frankly, I think it has to do with subnet, and I believe it has to do with how the Windows Fabric is written, and what it is expecting to see. I really think this is the case, which explains the whys as to how stretched Pools are no longer supported any
    longer. Yes?
    Thanks!
    Christian Frank

  • I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

    I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
    I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
    Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

    Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
    I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
    I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
    Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
    *Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

  • Can we share music/apps within a family while using different iTunes accounts?

    Can we share music/apps within a family while using different iTunes accounts?
    Recently purchased iPhone 5 for my wife and I + my daugther has an iPod.  I'd like for us all to have separate iTunes accounts so we can each use iCloud without getting each other's notifications, but would like to have one central repository for mucsic and apps.  I'm afraid if I set up iTunes accoutn for the tow of them, I'll have to re-purchase the music and apps (way too many!)

    It can be done, but you will have to sign in to your account on her itunes to updated the apps. Try these instructions:
    http://support.apple.com/kb/HT1848

  • Monitoring servers in SCOM 2012 via different locals within the same management group

    Hi,
    I have 2 management servers in a same management group. The 1st one is having English (US) locale while other is installed on Swedish locale. Both are accessed by different users having same admin rights.
    Once a USER 1 try to register a server through authoring tab from 1st management server(installed on English locale), a profile/group wrt the server registered is created successfully but the USER on 2nd management server (installed on Swedish locale) can
    not see the same in Authoring tab. He can view it in Monitoring tab as as well as Administration tab.
    The Vice versa is also true.
    Does any one have idea that is it SCOM 2012's expected behaviour wrt 2 2 different users on 2 different locales within a same management group ?
    Thanks in advance.

    Hi,
    I am a little confused, what do you mean by "register a server through authoring tab"?
    Do you mean that when you discover a server on 1st MS with discovery wizard then you cannot see it on 2nd MS(and the vice versa)?
    As far as I know, all those information should be stored in the operation database which is shared to both MSs within the same management group.
    We may use SQL query to find the discovered server on the operation database. Please also check operation manager event logs to get more information to troubleshoot this issue.
    Regards,
    Yan Li
    Regards, Yan Li

  • HT1146 I can not get my mail to send on my mac. It has been fine until about 2 hours ago, incoming mails are fine. I have jused all of my 3 accounts and I can't send from any og them (they are all on different servers) anyone have nay ideas on how I can f

    I can not get my mail to send on my mac. It has been fine until about 2 hours ago, incoming mails are fine. I have jused all of my 3 accounts and I can't send from any og them (they are all on different servers) anyone have nay ideas on how I can fix this?

    Jailbreaking violates the Apple warranty and licensing agreement and voids ALL support from Apple.  No one on here can help you as doing so is a violation of the Terms of Use of these Communities.  If you send the iPad to Apple they will just send it back to you as they are not permitted to work on a machine that has been jailbroken.

  • What are the entities that can be re-used in different servers, SI App, SI instance? And how?

    Greetings,
    What are the entities that can be re-used in different servers, SI App, SI instance? And how?
    e.g. can I use a deployed IQStreamable@app1  into app2?
    can I use a deployed observable/app1/siInstance1/Server1 into another query/app3/siInstance3/server2?
    On the presentation titled "04 – Installing, Deploying and Maintaining the SQL Server 2008 R2 StreamInsight Runtime Engine" with file name SQL10R2UPD05-DECK-04.pptx on ecn.channel9.msdn.com/o9/learn/SQL2008R2TrainingKit/Presentations/SQL10R2UPD05-DECK-04/SQL10R2UPD05-DECK-04.pptx
    It is mentioned one of the deployment option is "Deployment: Standalone Server"
    and it mention the following:
    "Use this option for the following scenarios:
    - Metadata objects need to be shared between applications
      - Event Types
      - Adapter Types
      - Query Templates
    - A data source registered with the server provides an event stream for another existing application"
    Could you please provide good example that explain the above statement?
    Cheers, Muhammad

    First, that statement - and those materials - refer to the "legacy" StreamInsight query/adapter model. They do not refer to how things work with the Reactive model introduced in version 2.1. Specifically, it talks about Dynamic Query Composition (DQC).
    You cannot use a deployed Observable in another instance of StreamInsight. You may be able to use them across applications in the same instance - off the top of my head, I'm not sure. I'm getting ready to get on a plane but will take a look at it later.
    Typically, however, applications act as containers (comparable to .NET AppDomains) so I don't think that you'd be able to do this easily. That said, the code and assemblies
    can be reused across multiple instances/applications. You would have separate instances of the classes involved but you would be able to reuse the query logic. That's a common use case.
    Can you be more specific about your use case and what you are trying to accomplish here? It's possible that there are alternative ways to do what you are trying to do.
    DevBiker (aka J Sawyer)
    Microsoft MVP - Sql Server (StreamInsight)
    If I answered your question, please mark as answer.
    If my post was helpful, please mark as helpful.

  • I bought an iphone 5 about 4 months ago and got applecare. yesterday I had to get on a different plan within the same company so i traded in my phone and got a new iphone 5. can i transfer my applecare to this new phone or would I have to buy it again?

    I bought a 16gb iphone 5 about 3 months ago and got applecare. yesterday I had to get on a different plan within the same company so i traded in my phone and got a new 32gb iphone 5. can i transfer my applecare to this new phone or would I have to buy it again?

    As this is a WW forum with different AppleCrare offerings you need to specify which Country
    as in North America has AppleCare+ and everywhere else AppleCare ,very different products
    So to avoid incorrect guidance suggest you specify Country

  • Can we clear more line items with different currency within one Vendor

    Dear All,
    Please guide us the following issue is
    Can we clear two line items with different currency within one Vendor (i.e., Down Payment entry passed in EUR and Invoice in JPY).
    Thanks in advance.
    Regards
    Srinivas

    Hi
    I suppose this should be possible in F-44, for any difference in forex enter a new line item 'Charge off diff.' to Dr/Cr Forex gain/loss account
    Thank You,

  • Can the JNLP and the jarred application be on different servers

    Can the JNLP and the jarred application be on different servers? If so, how would I alter my JNLP file to include the url of the second server?
    The reason I ask this is that my app is being uploaded to a shopping cart, to be available for purchase. The problem is that this shopping cart allows ONLY one upload for each item that's available for purchase, and the vendor of my shopping cart say that for security reasons I cannot store files in other places on that server. The problem is that I need the JNLP and the JAR for download. I thought that the simplest solution is to put the JAR on a different server, and in the jnlp specify the URL of the jar. Is that possible? Or, do you see another solution?
    I appreciate your help - I REALLY need to take care of this ASAP!
    Here's my jnlp:
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp
    spec="1.0+"
    codebase="http://server_where_jnlp_is/subdir/"
    href="myjnlp.jnlp">
    <information>
    <title>Title</title>
    <vendor>vendor</vendor>
    <homepage href="http://www.homepage.com" />
    <description>bla bla bla</description>
    <icon href="icon.gif"/>
    <offline-allowed/>
    </information>
    <security>
    <all-permissions/>
    </security>
    <resources>
    <j2se version="1.2+" />
    <jar href="myapp.jar"/>
    <nativelib href="libs.jar"/>
    </resources>
    <application-desc />
    </jnlp>

    I worked it out! What I did was I changed the jar href and the nativelib href to point to a different server
    eg:
    changed <jar href="myapp.jar"/>
    to
    <jar href="http://www.otherserver.com/myapp.jar"/>

  • Can shared components be shared among different applications within APEX

    Can shared components be shared among different applications within APEX ?
    -Louis Rosa
    Florida Center for Library Automation (FCLA)
    Gainesville,FL

    Not entirely true.
    Some like LOVs, Authorizations, Authentications can be shared amongst applications in the same workspace.
    Varad

  • IPhoto 2011. Created an album from different cameras (different filenames), placed pics in order in album but want to export into new folder on desktop in same order. Can I number the pics within iPhoto to reflect that order, or simply export in order?

    iPhoto 2011. I have created an album from different cameras (different filenames), and placed pics in order in the iphoto album but want to export into a new folder on the desktop in that same order. Can I number the pics within iPhoto to reflect that order, or simply export in order? 
    Thanks!

    File -> Export, and note the options under File Name
    Another way:
    Here's one (of several) way(s) to do what you want:
    Make an Album of the photos, then drag the pics into your preferred order.
    Then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
    Then File -> Export and in the Export dialogue set the Filename to "Use Title"
    Sort on Filename in the FInder and you end up with a folder full of images in the same order as the Album in iPhoto.

Maybe you are looking for