Can it be possible to...

do a backup on my macbook(early 2009) while i am not plug ton my external La Cie hd but this external La Cie hd is plugged in my IMac:so is it possible to trick it and do my backup while I am downstairs working and my IMac is upstairs?
Thanks,
JF

yes, this is possible if both macs are on the same local network. but remote backups are stored differently from directly attached ones. they are stored inside a sparse bundle while directly attached ones are stored directly in a folder on the drive. the two kinds of backups are not interchangeable. so you should stick with one kind. if you want to always do remote backups keep the drive plugged into the imac and back up the MBP over network. you'll probably have to erase your current TM drive (this should only be done with disk utility) and start backups from scratch. to back up remotely mount the remote drive on the desktop on MBP. then go to TM system preferences and select it as the designated TM drive.

Similar Messages

  • Can it not possible that i can retrive it for all line items in a single qu

    I have to make report for my application in which I am facing a following problem:
    In the application there are multiple suppliers and each supplier having multiple line items and each item having multipale events. each evant having three status GREEN,RED and BLUE.
    When a user select 'all suppliers' to show the the status time span for a supplier (i.e. for a supplier how many parts and upto how much time parts are in blue, red and green status)
    to show the cumulative status time span I have to find out a event for each line item which is having nearest lower entry time from the lower part of the given time span.for this i have write following query
    SELECT * FROM parts_events
    WHERE vendorid = ? AND partid = ?
    AND visible = 'visible' AND active = 1
    AND entrytime = (SELECT MAX(entrytime) as
    entrytime from parts_events
    WHERE vendorid = ?
    AND partid = ?
    AND entrytime < ?
    AND visible = 'visible'
    AND active = 1)
    the problem is that i have to fire this query for each line item, can it not possible that i can retrive it for all line items in a single query?

    maybe if you can post some sample data and output will help us analyze more youre requirement.

  • Trying to integrate with User Messaging Service adapter in SOA suite.Can it be possible through an JMS interface.

    Trying to integrate with User Messaging Service adapter in SOA suite. Can it be possible through an JMS interface.
    I have an JMS backend integrated to Oracle B2B. Is it possible to send an email protocol message using JMS interface to B2B where User messaging Service has been implemented. The adapters required for UMS have been deployed and the sdpmessaging jar files also have been added to the classpath. The only problem i face is i dont have an BPEL system to integrate where as in the forums it has been mentioned how to post a message using BPEL.
    Please let me know if there is a way to integrate the adapter with JMS interface.
    Thanks in advance
    Deepak

    If I remember correct, to use JCA adapter with SOA stack requires that adapter implement some Oracle API.
    The Adapter SDK is a light-weight tool kit that enables rapid implementation and deployment --- http://www.oracle.com/technology/products/integration/adapters/pdf/DS_OracleASAdapter.pdf
    http://download.oracle.com/docs/cd/B16981_04/current/acrobat/cct115dg.pdf
    Mostly you will have to wrap your jca adapter to make it available in SOA suite/stack.
    Other option is that you adapter provider would have given CCI interface or some custom interface which can be used for invoking adapter end-points.
    Manoj

  • "How can I, if possible, retrieve my recently deleted history?"

    "How can I, if possible, retrieve my recently deleted history?" Sometimes in deleting websites and clearing the history information that we meant to keep on there gets accidentally highlighted and deleted also, and I was curious if there was another means of retrieving (ie. getting the info back)?

    Nope

  • I would like to ask if is possible to predict a future version of iOS can have the possibility to choose the color with which to write and be able to choose the character also...

    I would like to ask if is possible to predict a future version of iOS can have the possibility to choose the color with which to write and be able to choose the character also...

    Nobody here would have a crystal ball and know what Apple plans on doing in the furture.
    If you feel this feature is so important, you can let Apple know:
    www.apple.com/feedback

  • I am unable to get all keynote transition and slide effect feature in ibook keynote widget. Can it be possible to see same presentation in ibook as was in keynote?

    I am unable to get all keynote transition and slide effect features in ibook keynote widget. Can it be possible to see same presentation in ibook as was in keynote?

    This Apple Support Document has details on the subset of Keynote transitions which can be used in iBooks Author.
    Here are the details:
    Transitions and builds
    These transitions and builds work with the Keynote widget:
    Transitions:
    Magic move
    Cube
    Dissolve
    Drop
    Flip
    Motion dissolve
    Move in
    Pivot
    Push
    Reveal
    Scale
    Twirl
    Builds:
    Appear/disappear
    Cube
    Dissolve
    Drop
    Move in/out
    Pivot
    Scale
    Twirl
    Unsupported builds and transitions will be replaced with Dissolve.

  • Can it be possible to disabled F12 key on boot sequence?

    Hi,
    Lenovo G570
    Can it be possible to disabled F12 key on boot sequence.
    I want to avoid the use of CD for booting.

    I have the bios provided with a supervisor password (SVP).
    At the moment I can with SVP press F12 at boot loose, the boot sequence to
    Make CD and boot the computer from CD. I will indeed preventaccurate.

  • Can it be possible to add "Admin" -- not be able to add another "Admin"

    I have the following requirement:
         Create the following Groups:
              Admin:
                   all the users in this group, should have complete access to application +
                   manage users
                   But should not be able to add another Admin
              Staff:
                   all the users in this group, should have complete access to application
                   Can't manage users
                   Can't create another Admins
              Editor:
                   all the users in this group, should have partial access to certain pages
              SuperUser:
                   Same as Admin role except
                   He should also be able to add "Admin" user
    Question:
    Can it be possible to add "Admin" ---&gt; who should not be able to add another "Admin"

    Hi,I have the same requirement,and I need another function,I want only one user who can create user,but he can't develop application.how can i do ?
    thank you first
    lixinzhu
    2006/05/17

  • Can it be possible that a user insert data by a form and then create a PFD?

    Can it be possible that a user insert data by a form, then store the data in the Data Base and finally create a PFD?
    If this is possible with BI Publisher, what do i have to do to link the form with the BIPublisher interface?
    Regards

    Hi
    If you just have a PDF form and do not need to pre populate data then all you need do is:
    1. Add a submit button to the PDF - you can use the full Adobe product or a BIP API
    2. Load the PDF as a template with a dummy data source.
    The user can then run the "report" as usual. When they have completed the form they can hit the Sumit button on the form. Adobe will then scrape the data out of the form in an XML format and post it to the URL you added. At the other end of the URL you need a servlet to accept and process the XML data.
    If you need to prepopulate the form you can attach a datasource to the PDF template but ensure the fields are preserved after running the form for the user through the config options.
    BIP does have APIs to populate drop lists, etc but these are not exposed thru through the BIP UI.
    I'll try and write this up for the blog and OTN soon
    Regards
    Tim

  • Exist or can you add possibility to place menu bar(all buttons) on the right side of window?

    Something like MS Windows menu bar which can be placed on each screen side. On 16:9 screen this will add more space for site and navigation still will be very easy. I wanted attach image with concept but it's not possible here :(.
    I'm not sure if I'm writing in correct place but this support system isn't too user friendly :/

    You could try using Firefox's Safe Mode to reset your toolbars. Not sure whether this is a toolbar problem, but it's probably worth a try.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, check this article on how to start Firefox in
    [https://support.mozilla.com/kb/Safe+Mode Safe Mode] and use the dialog to reset toolbars.
    Any luck?

  • Printer suddenly not communicating with laptop and can't print, possibly due to antivirus software?

    All of a sudden I can't print from my laptop, neither wireless or via USB.  I keep getting an error message "printer not responding."  I did the dx/repair and was able to print a test page, but that's it.  Would like to know if it might be due to my antivirus software/firewall?  
    I use Windows 8 on an HP laptop.  Security software is Norton.  This has never happened before and I"ve been using this Norton subscription for at least 8 months, maybe longer. 
    Is there something I can do in the Norton settings to fix this?
    Thanks.
    Solved!
    Go to Solution.

    Hi ellenrozsa,
    Uninstalling and reinstalling the PIXMA MG5420 should resolve this issue.  To do this, please follow these steps:
     1.  Put the PIXMA MG5420's CDROM in the CDROM drive.  If the welcome screen appears, exit it. 
     2.  Place the cursor in the upper right hand corner of your screen to display the Charms Menu.
     3.  Click on Search.
     4.  Type RUN.
     5.  In the Search Results, click APPS and then click RUN in the results to the left.
     6.  Click Browse. In the Browse window, click on "Computer".
     7.  Double click the CANON_IJ CDROM. 
     8.  Double click the folder named WIN.
     9.  Double click the folder named Driver.
    10.  Double click the folder named DrvSetup.
    11.  Double click the file named DelDrv.  If you are using the 64 bit version of Windows 8, please double click DELDRV64.
    12.  In the Run box click OK.
    13.  Place the cursor in the upper right hand corner of your screen to display the Charms Menu.
    14.  Click on Search.
    15.  Type RUN.
    16.  In the Search Results, click APPS and then click RUN in the results to the left.
    17.  Click Browse. In the Browse window, click on "Computer".
    18.  Double click the CANON_IJ CDROM. 
    19.  Double click the folder named WIN.
    20.  Double click the folder named Driver.
    21.  Double click the folder named LAN.
    22.  Double click the file named CNMNPU. In the Run box click OK.  Follow the on-screen prompts.
    Once the printer has been uninstalled, restart the computer.
    To install the PIXMA MG5420 for use over your network wirelessly, please follow these steps:
     1.  Visit Canon's website at: http://www.usa.canon.com/cusa/support/consumer
     2.  Type PIXMA MG5420 in the "Enter Your Model Name" box and click GO.
     3.  On the Support page for your unit, click the 'Drivers & Software' link in the middle of the page.
     4.  Under Recommended For You, please click on the MG5400 series Mini Master Setup.
     5.  If you agree, please select the checkbox next to "I have read and agree to the terms of the Disclaimer and wish to continue with the download".
     6.  Click the Download box.
     7.  A File Download box should appear at the bottom of the screen.
     8.  Click Save.
     9.  Once the download is complete, open your Downloads folder.
    10.  Double click [mast-win-mg5400-1_0-ucd.exe] to begin installation of the drivers.
    Follow the prompts and installation will complete.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I have some problems importing a imagesequence in Premiere CS6. The online help tells to import, but I can see thats possible. I have an export option in Premiere, but in V/3 I can't find it. I have no problems in my CS6..

    When I render Max files, I use an older computer with Adobe CS3.
    While the other computer is working, I use my old, which have Mastercollection CS3.
    In the help file, I am told to "import" the images, but if I follow the explanation, I can see its for new versions, because Premiere CS3 haven't the "import" option.
    Do anyone know how to import an 130 image image sequence in Adobe Premiere CS3.
    Thanks a lot in advance.
    Best regards
    Michael

    Your drive is formatted with the NTFS file system.  OS X can read but not write to the NTFS file system.  There are third party drivers available that claim to add the ability to OS X to write to an NTFS partition.  I have not tried them and don't know if they work.
    The only file system that OS X and Windows can both write to natively is the FAT32 file system.

  • How can I allow possible registrants to fill our a form on facebook?

    Does anyone know how I can allow access to this form to anyone on Facebook or by email?

    Just open your form file, go to the Distribute tab, and select Copy URL. You can then paste this into your Facebook page or send via an email.
    Randy

  • Can it be possible to create invoice without billing plan date?

    Hi Gurus,
    I have made settings for billing plan in contracts. But, client wants billing plan at contract level only for the sake of reporting. Client doesnt want invoice to be created according to these billing plan.
    Now, consider this scenario,
    I have created contract A with billing plan values in it.
    I have created sales order B with reference to contract A. There are no billing plan values in sales order B.
    There is no delivery and PGI.
    Now, when I try to create invoice with reference to sales order B, system doesnt allow me to save the same and says "No billing plan date found".
    Will it be possible to create invoice irrespective of the billing plan in contract?
    Please guide.

    Hi,
    Then in that case i would advise not to use billing plan for your contract document type.
    If you intend to create a sales order in reference to your contract document which has billing plan type attached, then in that case you need to maintain billing plan for your sales order document too.
    Reward if helpful.
    Regards
    Ravi

  • Is it (or can it become) possible to assign colors to calendar categories or even specific events?

    For the 'Category' feature this could be done with a pick-list for each category; Maybe a color selection over-ride for specific events under the 'Options' menu?
    This would really help calendar readability -
    Thanks!

    For categories, you can set the colour of a tiny bar in the event's entry in the calendar.
    [http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Options]|Calendar|Categories
    You can set the colours associated with calendars so a clumsy way to do it would be have separate calendars for the types of events you want to track. This would allow the entire entry to be coloured rather then the tiny blob associated with a category.

  • Can it be possible that all flv files are slightly different depening on the software program used to create them

    Hi All,
    Can flv files be different and kinda awkward, if their produced in older or newer version of flash video encoder? Or anyoher software programs that can convert to the flv format?
    If so, have any of you folks come across an easy way to fix?
    Kind Regards,
    Boxing Boom

    Yes, I'm not sure if it's still common, but for a while different programs didn't add certain meta data to the encoded file, so you wouldn't know how long it was etc... The way to fix has mostly always been FLVMDI:  http://www.buraks.com/flvmdi/

Maybe you are looking for