Can it Possible...Developer 2000 v2.1&v6 work together

I need to have on the same computer, Developer 2000 v.2.1 and v.6, can it's possible?
How?

It is possible. Only be very careful how you handle the source fiels. Dev 6.0 opens & converts D2K 2.1 sources without any warning.
So, once you saved some fmb/pll with dev 6.0, you will no longer be able to open them with D2k 2.1.
So, imho, it's best to decide which of the two you'll use, although you may have them both on the same PC.

Similar Messages

  • Is Developer 2000 release 2.1 works under Oracle 9.2.05.

    Is Developer 2000 release 2.1 works under Oracle 9.2.0.5.
    If anyone can answer this will be real help.
    Thanks in advance.

    It may be available through Oracle Support depending on the platform you need. You will need a valid Support Contract and access to MyOracleSupport (http://support.oracle.com)
    Here is the info for Windows.
    Oracle Developer Server Release 2.1 for Microsoft Windows NT
    Part number: A63484-01
    Oracle Developer/2000 Release 2.1 for Windows NT and Windows 95
    Part number: A63486-01
    The following should be considered before attempt to request or use the above:
    1. This product was desupported long ago and is not entitled to any Technical or Development support.
    2. This product version was not Y2K compliant. As a result it likely will not install correctly as the installer is sensitive to the date.
    3. This product was never intended to work correctly on the current operating systems. So, even if you are able to get it installed, it likely will not work correctly.

  • I have a new Bose sounddock with a lightning connector, but my iPod has the old style connector. Can I get an adapter to make them work together?

    I have a new Bose sound dock with a lightning connector but my iPod has the old style connector
    Can I get an adapter to make them work together?

    Alternatively...
    is this what you're after?
    If so, have a look here: http://www.amazon.co.uk/Lightning-female-30-pin-Dock-Cable-Adapter/dp/B00DZN3GZK /ref=pd_sim_sbs_ce_1
    or this one...
    http://www.amazon.co.uk/SANDBERG-440-45-Adaptor-Lightning-Connector/dp/B009KZZ3L C/ref=sr_1_16?ie=UTF8&qid=1382801610&sr=8-16&keywords=30+pin+to+lightning+adapto r
    Or google "lightning female to 30-pin dock male cable adaptor". The cruicial part is female lightning to male 30-pin ends.
    The Apple cable is a female 30-pin to male lightning end.

  • Can I make my iMAC and MAC book work together?

    I've done the set up to join other networks.....trying to get my desktop and laptop to work together.
    Is it even possible for them to keep updated info regardless of which one I enter it on?
    If so, please tell me how.
    Thank you
    Diane

    There are various programs like Dropbox that can help you sync two computers over the network, but I still find them kind of a hassle to set up and maintain.
    I simply make my laptop the primary storage, and I turn on File Sharing on my laptop. Then on my desktop I just log into my laptop and open files directly over the network. On my desktop I have aliases to my laptop folders so I can get into them in a couple clicks.

  • How Can I get Developer 2000 rel 6

    Hi All,
    I tried downloading developer rel 6i but anytime I tied that I have this error after when I want to instal " Zip file damaged, truncated or has been changed since it was created, if you downloaded this file , try again"
    I am getting frustrated, Can anyone help
    Thanks

    I've had the same error message downloading other Oracle products when the file is quite large, > 500 megs.
    If there is an option to download the product using a number of smaller zip files, try that. There should be a .bat file provided to assemble the zip files into one large file.
    Good Luck,
    Paul

  • CAN'T INSTALL DEVELOPER 2000

    I can't install the forms runtime ! Every time I try to do this, windows95 gives an error in oiexec.dll. Can somebody help me?
    I'm student and need to have this product installed very quickly, 'cause I've got an examination of it in 2 days. PLEASE HELP ME!

    Naomi,
    Which Forms runtime version r u trying to install ? When is this error coming ? is it giving while installing or after installation when u try to open ur application ? If this dll file is missing then just copy that dll file manually from the CD. Or if u r in an emergency just install the entire forms builder/runtime and just use the run time. simple and silly way to solve this issue.

  • HT1727 the computer my itunes were on completely crashed. i rebuilt my files on a new computer but my 4th generation ipod will not sync with the new library. what can i do to have the two devices work together again?

    the computer my itunes were on completely crashed, nothing was recoverable. i bought a new computer but my ipod would not sync with it. i rebuilt my itunes library from scratch but my ipod will not sync with it.how do i get the two devices to sync?

    Follow the steps given here…
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • Can the e-mu proteus x and 1212m work together?

    Hi
    I'm after the Proteus X sound module as well as the 1212M audio card because of the Mastering Grade audio converters.
    Will both of thoses cards work together?
    Is there a upgrade package to get the Proteus X sounds on the 1212M sound card?
    any other ideas or suggestions would be great
    Chris

    Chriszelno,
    Proteus X will work with any of the Digital Audio Systems, including the 1212M. I don't see a Proteus X/1212M bundle on the EMU webpage, but there are some good prices on Recertified B-Stock 1212M's and Proteus X separately in the Bargins and Specials section.
    You might consider the Emulator X Vintage Composer bundle which includes the 1212M, Emulator X (which has all the functionality of Proteus X plus much more in the way of sample creation), and the Sounds Beat Shop 2. Currently it shows up as being out of stock on the website, but the 1-800 number on the site will get you in contact with someone who would have up to the minute news on what is available.
    Jeremy

  • Developer/2000 Release 2.1

    Hello everyone,
    Please help me find a place where I can download Oracle Developer/2000 Release 2.1 from.
    Thanks.

    It may be available through Oracle Support depending on the platform you need. You will need a valid Support Contract and access to MyOracleSupport (http://support.oracle.com)
    Here is the info for Windows.
    Oracle Developer Server Release 2.1 for Microsoft Windows NT
    Part number: A63484-01
    Oracle Developer/2000 Release 2.1 for Windows NT and Windows 95
    Part number: A63486-01
    The following should be considered before attempt to request or use the above:
    1. This product was desupported long ago and is not entitled to any Technical or Development support.
    2. This product version was not Y2K compliant. As a result it likely will not install correctly as the installer is sensitive to the date.
    3. This product was never intended to work correctly on the current operating systems. So, even if you are able to get it installed, it likely will not work correctly.

  • How can I convert Oracle Developer 2000 forms?

    How can I convert Oracle Developer 2000 forms and menus to the Oracle 9ids forms and menus

    Check out the upgrade and migration section on
    http://otn.oracle.com/products/forms
    We will soon have a new section on OTN about Forms upgrades, keep checking back for more info.

  • Developer 2000 download, is it possible nowadays?

    Hi, I would like to know if I could download a version of Developer 2000, I need it for educational propose.
    Thanks.

    No, it's been quite a while since we have had this download available on the site.
    OTN

  • How can i connect personnal oracle with Developer/2000

    hello,all
    First i Install Personnel oracle and then I install
    Developer/2000 in a different Oracle home.Now plz tell me wat
    should i do to connect these two.Plz write in detail.
    thank you ahead.

    Update the tnsnames.ora file in the ORACLE_HOME directory where you installed your Designer/2000.

  • Using Developer 2000 ver. 1.3.2 with Oracle 8 client

    It is possible to run developer 2000 1.3.2 (Forms 4.5) using
    sql*net of Oracle 8 client ?
    May I set some parameter in regedit file ?
    My Operating system is Windows95/NT.
    Thank you in advance.
    Paolino
    null

    Paolino Censi (guest) wrote:
    : It is possible to run developer 2000 1.3.2 (Forms 4.5) using
    : sql*net of Oracle 8 client ?
    : May I set some parameter in regedit file ?
    : My Operating system is Windows95/NT.
    : Thank you in advance.
    : Paolino
    I think if you follow the steps you can connect --
    1. First check whehter TCP/IP has been installed and
    you can connect using the protocol. You can do this
    using simple command like ping. So on the DOS command
    prompt type following--
    ping 127.0.0.1 and enter.
    This will give you a series of messages and in the end
    OK. If you get OK in the end that means TCP/IP is
    properly working.
    2. Then configure the tnsnames.ora for the database sid you have
    chosen. You can do it through SQL Net Easy configuration.
    Configure it for TCP/IP and remember the sid name e.g. ORCL.
    3. Go to DOS prompt and change the directory to your
    ORACLE_HOME. Start the database giving command
    svrmgr30 (enter)
    4. It will give you prompt as SVRMGR. Type follwing
    connect internal; (enter)
    It should show message as connected. Then quit out of server
    manager.
    5. You are now again on to DOS prompt. Type the following
    lsnrctl80 start (enter)
    It will give the message as Listener Started Successfully.
    6. Now minimize the Dos window and start Forms application.
    While connecting type username, password and database name also.
    e.g. scott, tiger, ORCL.
    It should get connected. Because I followed the same procedure
    and now I am working suceessfully on it.
    null

  • Developer 2000 forms to compile in 9i

    Hi.
    I have an application developed in Developer 2000 , now want to convert it in Deverloper 9i. While compiling it give me many errors like report calling function has been changed. I am not able to find and migration utility in the installation . Please let me know if I have not fully installed developer 9i or there is some other way to migrate froms .
    Thanks.

    In the newer Forms versions, it is only supported to call Reports using the RUN_REPORT_OBJECT built-in. You will need to either manually recode your app or use the Forms Migration Assistant (FMA) to perform the task for you. Although the FMA seems like the easier method, it does add a significant amount of additional code to your application including the addition of a PLL. If possible, I would recommend manually recoding. FMA was available with Forms 9.0.x and newer, however in 9.0.2 installing the first patchset or newer was required in order to use it. It was also available for 9.0.2 as a separate download for installation into the Oracle Home. Newer Forms version include the utility with the initial product installation.
    (FMA for 9.0.2 only) http://www.oracle.com/technology/software/products/forms/index.html
    Refer to the product documentation (Builder Online Help) for more details about RUN_REPORT_OBJECT and FMA
    For us to assist here, you will need to clarify which product versions you are using. Neither Developer 2000 or Developer 9i represent versions. These are just marketing names which represent numerous versions. Each version handles migration slightly different.
    The product version can be found in the Builders under HELP > ABOUT or by opening the compiler's help option.
    Access to most of the Forms documentation can be obtained from here:
    http://www.oracle.com/technology/products/forms/
    Also, be aware that all versions of Developer 9i (6.0.x & 9.0.x) are considered obsolete. The latest version is 10.1.2.0.2 (10.1.2.3 with the latest patch set) - "Developer Suite 10g Release 2". If your "Developer 2000" version is 6.0.5.x you can move directly to 10.1.2.0.2, however you will need to change

  • Developer/2000 for Dynix PTX

    Is it possible to install Developer/2000 client on Unix Server?
    What have to be done to use it on Unix (other products like X
    Windows,...)?
    null

    Developer6 is the latest release of Developer/2000. Developer6i is expected very soon.
    Developer6 will work on Win95/98/NT and is the best RAD tool to build Client Server Applications very quicky.
    Your Oracle Database can be Oracle 8i or Oracle 8.0.5 on WinNT or Unix.
    Oracle Database and Developer6 forms a terrific combination.
    You can download Developer 6 products from http://technet.oracle.com
    also visit http://www.oracle.com for more info.

Maybe you are looking for