Can iWeb act as a calculator?

I would like to try iWeb, can it do this: a page where the user would enter in three numbers, a calculation would be performed, and the result displayed on the page.

Try this JavaScript calculator
http://www.javascriptkit.com/script/cut18.shtml
Don't know whether that is what you want - if so just put it in an html snippet.

Similar Messages

  • How can iWeb hit counter be made to work with non-Apple server?

    How can IWeb hit counter be made to work with non-Apple server?

    This tutorial describes how to add an alternative counter to an iWeb page: iW05 - Adding a Graphical StatCounter as an HTML Snippet to an iWeb Page
    OT

  • Can OpsCenter act as configuration managment? (keep server ssh keys for rebuild)

    I'm very new to OpsCentre. Can it act as a sort of configuration managment tool, eg keeping ssh keys (or other host-particular config files) of a server, so in case the server is (or has to be - Disaster Recovery) be rebuilt, the old ssh keys can be restored on it by OpsCentre as is it is re-built (re-provisioned, I guess is how they call it).
    Very grateful for advice!

    Enterprise Manager (EM) Ops Center (OC) is not a Configuration Management(CM) tool. Ops Center is a "end-to-end" infrastructural System Management tool (not restore a previous configuration). It's covered all task of management infrastructure (Oracle) stack. Read a welcome message of EM OC Doc Library.
    IHMO: A good Configuration Management and Change Management tool is CFengine 3 or Puppet.
    HTH
    Michele V.
    If you want, mark the reply as “Helpful Answer“ or “Correct Answer”. By marking replies correct or helpful, you make it easier for community members to find replies that might help them in a similar situation

  • Hi, I have installed some app to my I pad 1, It worked few days, but from tomorrow I can open any apps like calculator, Facebook ect. when touch it only vibrate does not come. pls help me

    Hi, I have installed some app to my I pad 1, It worked few days, but from lastday I can open any apps like calculator, Facebook ect. when touch it only vibrate does not come. pls help me

    It is ok now, I installed new app, then is ok

  • Can iMac act like a target display? Can we connect a PC/MAC to iMac and can it just work like a monitor.

    Can iMac act like a target display? Can we connect a PC/MAC to iMac and can it just work like a monitor.

    It depends.

  • Can iweb be used to update any site or just .mac sites? How?

    Can iweb be used to update any site or just .mac sites? How?

    The URL is http://members.aol.com/MarleneHedgehog.
    I cannot see the iWeb files uploaded with the FTP
    program.
    I tried using shareware HTML Creator 3.5.1 instead
    of
    iWeb. It provided me with an index.html which did
    upload. I also uploaded the ten jpg's separately-
    which did upload . However, when I type the URL
    into
    my browser I do not get the website but the names
    of
    the JPG's appear.
    It looks like your jpgs need to be all in a folder
    called Marlene Pics, because that's where they were
    when you made your main page.
    I'd appreciate any advice. I am not a techie. I
    need
    simple and easy- Many thanks.
    If you are going to use iWeb, I'd recommend you use a
    different host. It's not simple and easy and unless
    you use their own stuff, and even then....
    Hi Tom!
    Thanks for your message. Can you suggest a free host that works well and easily with iWeb?
    Have you ever heard of someone using iWeb successfully with an AOL site?
    Would I be better off forgetting about iWeb and just trying to do an index.html (with HTML Creator3.5.1) and then uploading the jpgs in a folder?
    Am I right in thinking that the "essence" of a website is a correct index.html and the jpgs?
    Thanks again for your advice.
    If you find it easier to contact me directly by e-mail, my e-mail address is [email protected] or [email protected]
    Many thanks again.
    Dr. Rudy
    iMacG5   Mac OS X (10.4.7)  

  • Can iWeb be used on the most recent iMACs?

    Can iWeb be used on the most recent iMACs?  I've used iWeb for several years but am thinking about upgrading my iMAC.
    Ted Norton

    See this page for info about using iWeb with Mountain Lion...
    http://www.iwebformusicians.com/iWeb/mountain-lion.html
    The new version of OSX may be announced next week and it will be interesting to see how iWeb will survive.

  • How can i do a proper calculation of working hours?

    I have tried doing a calculation of my working hours using the ABS formula but it still gives me the wrong answer.
    5:00 PM
    1:00 AM
    16h
    the formula is =ABS(A1-A2)
    the resulte shoulb be 8h but it shows 16h....

    giltober wrote:
    Jerry,
    I start working at 5pm and finish in 1am which means i worked for 8 hours.
    the only way to get the correct answer is to enter the dates also?
    is there a formula that i can enter that will take in consideration that every time i work i start at the afternoon and finish after midnight?
    i have a cell that i enter the date..
    im still new to numbers and i dont know i to put that into consideration...
    thank you for your help
    Gil.
    That's right, my mistake on the detail. I must have been distracted. I stand by the rest of my post.
    Here's my approach to solving the problem:
    This will take care of the situation where you sometimes input both times on the same day even though they represent different days.
    Jerry

  • Can't get iPhone 5 calculator to include tax in total - Help!

    Bought my iPhone 5 July 25, 2013, but haven't had much time to learn how it works. About the calculator... On most calculators, if I enter 239.00 x .0825 = I get 19.7175. If I then enter + = I get the total including tax 258.7175. For some reason, I can't get the calculator on my iPhone 5 to do this. What do I need to do? Thanks!

    Thanks to all for your input and attempts to help.
    Hot Spur, I got an email where you said:  "How is the iOS calculator going to know the tax in any given area? It's different everywhere."  I already know the tax rate so I don't need the calculator to know  it.
    I was just hoping the standard iPhone 5 calculator would allow me to enter the sale price, multiply it by the tax rate, hit the equal sign to see the tax amount, hit the plus sign, then the equal sign, then see the total due, including tax. This is the order it typically prints out on a receipt, too.
    Sale Price
    x Tax Rate = Tax Amount
    + = Total Due, including tax
    I'll use my WalMart and Staples calculators until Apple comes up with a calculator that can do this. I had no idea it was so complicated...

  • Since upgrading to 10.6.8, I can't sync to my calculator and my ipod nano flashes yellow.   Could 10.6.8 have closed some ports needed?

    I have a TI-92+ calculator, and the TI Connect software to sync it.
    Since the 10.6.8 update, I can't access the calculator to add software.
    The cable reads as present in System Profiler.
    Also, my iPod Nano is flashing yellow but not mounting in iTunes.
    I am wondering if 10.6.8 is blocking a port the TI Connect software needs.
    The iTunes issue might be resolved by ripping iTunes out, deleting it, and reinstalling it.
    But I tried that with TI Connect and it didn't help.
    I just got a bunch of software to put on the calculator and can't access it !

    It depends on what iMac you have. If it is an old PPC (G4 orG5) iMac then no further upgrades are possible. If it an Intel iMac:
    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    (NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
    The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether any further updates are required, particularly to iTunes.
    You should now see the App Store icon in iTunes, and you now need to set up your account:
    http://support.apple.com/kb/HT4479
    You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac Mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    iCloud system requirements:
    http://support.apple.com/kb/ht4759
    If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    or Mountain Lion:
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

  • Can iWeb be hosted by another site other than .Mac?

    I have already purchased a domain name and a hosting agreement with GoDaddy, however I cannot utilize their web page templates for some reason. Another mac user suggested I purchase iWeb and then have GoDaddy host. Can that be easily accomplished?

    Yes, it can be easily accomplished. Here's iWeb's Help info on this topic...
    Publishing to a server or hosting service other than .Mac:
    Instead of publishing your site to .Mac, you can publish your site to a local folder and then upload it to the server or hosting provider of your choice. You may want to use this method if you own a domain name and want to place your site there.
    To publish your site to a local destination:
    Choose File > Publish to a Folder.
    Choose a location to store your site, and then click Choose.
    After you publish your site to a folder, you can use an FTP (file transfer protocol) client to upload the site folder and index file to the location of your choice. iWeb does not provide an FTP client, but they are easy to obtain. Some hosting services provide a web-based FTP upload service, or you can download an FTP client from the web. For more information, contact your server administrator.
    If you don't publish your site to .Mac, these features are unavailable:
    Password protection
    Blog comments
    Blog search
    Hit counter
    Enhanced slideshows
    Also, for Subscribe buttons to work, you must specify your site's URL in the field provided after you publish to a folder.

  • Can iWeb be used without a .Mac account?

    Just wondering, is it possible to use iWeb to create .html pages I can save and upload to _my own_ web space?
    Or is iWeb tied to .Mac, so it can only be used if you have an account?

    Here are some tips:
    http://homepage.mac.com/thgewecke/iwebserver.html

  • How can I activate the average calculation with cl_salv_hierseq_table class

    Hi there,
    Iu2019m using class cl_salv_hierseq_table to display a two level hierarchy (header and item) list.
    For some reason it seams that those calculations are active by default with class cl_salv_table but not for cl_salv_hierseq_table.
    I tried every suggestion from the class documentation and SAP help and nothing seams to work, the menu calculation options are always inactive except for the total calculation.
    After the cl_salv_hierseq_table=>factory...
    And before cl_salv_hierseq_table->display( )
    I triedu2026u2026.
    cl_salv_aggregations = cl_salv_hierseq_table->get_aggregations( 1 )
    cl_salv_aggregations->add_aggregation( 'COLUMN1' )
    COLUMN1 is a currency column in header level table
    u2026u2026..
    cl_salv_aggregations = cl_salv_hierseq_table->get_aggregations( 2 )
    cl_salv_aggregations->add_aggregation( 'COLUMN2' )
    COLUMN2 is a dec column in item level table
    u2026u2026..
    cl_salv_aggregations = cl_salv_hierseq_table->get_aggregations( 2 )
    cl_salv_aggregations->add_aggregation( columnname = 'COLUMN2' aggregation = if_salv_c_aggregation=>average )
    u2026u2026..
    cl_salv_aggregations = cl_salv_hierseq_table->get_aggregations( 2 )
    cl_salv_aggregations->set_aggregation_allowed( 'COLUMN2' )
    u2026u2026..
    cl_salv_aggregations = cl_salv_hierseq_table->get_aggregations( 2 )
    cl_salv_aggregations->set_numerical_aggregation( ).
    cl_salv_aggregations->set_aggregation_allowed( 'COLUMN2' )
    cl_salv_aggregations->add_aggregation( columnname = 'COLUMN2' aggregation = if_salv_c_aggregation=>average )
    u2026u2026..
    cl_salv_aggregations = cl_salv_hierseq_table->get_aggregations( 2 )
    cl_salv_aggregations->add_aggregation( 'COLUMN2' )
    cl_salv_aggregation = cl_salv_aggregations->get_aggregation( 'COLUMN2' )
    cl_salv_aggregation->set( if_salv_c_aggregation=>average )
    Any help will be appreciated!

    Thanks Harsh Bhalla,
    Subtotals can be built (displayed) at Header Level Only, true but the values to calculate those totals can come from either header or item level, otherwise it wouldnu2019t be of much use would it?
    Anyway my question is how to activate the average calculation as well because the totals calculations is already active for either item or header level by default.
    For reference when on the display layout Iu2019m referring to the menu Edit -> Calculate -> Mean Value.

  • Can iWeb templates be modified?

    I last used iWeb to set up a travelogue in 2006. I have 3.0.4 ('09, I think).
    I may be remembering why I didn't use a template before--because I wanted something I couldn't get with the templates.
    Am I correct that I can't change a background or text color, or choose to center text which is flush left on an iWeb template?
    Karen

    Jeff, you're a prince. I've printed out your last posts & dragged & dropped the 2 samples to my desktop, from which I can then use them I was able to do the web browser background instructions. It worked! Cool.
    I'm sure this will turn out to be embarrassingly self-evident, but how did you 'copy the page background image and paste it into preview'? It has no 'handles' allowing it to be selected. Nor could I locate 'Preview'.
    Now trying the paper maneuver you explained, I'm a bit stuck. What do I select for 'Page Background? I now have removed the Formal Theme text boxes, have changed footer pixels to '0', and have a horizontal rectangle of the ivory paper there. How do I make it disappear so I can then replace it with the size-able box as you describe?
    By the way, I noticed right off in your video was how you changed the width of the page immediately. How did you choose 900--and I forget the vertical pixels you chose but will check again. I hate how small the page content size is. Is there a 'standard' size these days for website width & height?
    Again, thanks.
    Karen

  • How many pages can iWeb handle?

    I'm planning to do a web project that will have hundreds of pages with links to one another. Is iWeb able to handle that kind of thing, or will I need to buy something like Dreamweaver? Thank you.

    If you decide to use iWeb I suggest you don't put all the pages in one site. That site will get very large, take a long time to load in iWeb and really cause problems if you have to fully republish a number of pages instead of just the changed. You would have to republish the entire site.
    If you go that route separate pages into separate sites and link them together. There's a way to do that thru the navbar. It can be done but might not be as effective as Dreamweaver as Wyodor described.
    OT

Maybe you are looking for

  • How do I convert an .avi file when the codec is CLLC

    I've been sent a file .avi to convert for a digital display. We do this often and have had no problem, however the codec is CLLC? I've never heard of it and FCP won't read it, nor will VLC or QT. They compressed using Edius. I've tried all sorts of p

  • Can you use an iPhone4 bought in the USA in the Uk

    I am going the USA and want to buy an iPhone 4. I was wondering if I can use it here in the uk when I get back? Does this also work for the iPad too?

  • Not able to install Oracle 11g R2 client in windows 8 machine

    Oracle universal installer window is not coming up in windows 8 machine, if any one installed Oracle 11G R2 client in windows 8. Please share those steps and if you have latest 11G client share that download link. Thanks in advance. Edited by: 969434

  • Adobe Camera Raw and Adobe Lightroom color profiles ....

    Adobe Camera Raw and Adobe Lightroom color profiles .... for sony cameras

  • Warranty? What is that?

    [ENGLISH-INGLES] Hi, I tell you my case. I have my Sony Xperia z3 since December. Two weeks ago the screen went black. The double tap works, so the touch too, when you press the screen the brightness is turned on (but this is continued seeing in blac