Can jabber client connect to external other telepresence devices?

Hi. I have some questions about jabber environment and jabber client.
1. When I want to use jabber on Mobile, I know it would be needed Anyconnect VPN feature of ASA.
    But, if CUCM and CUP have public IP address:ignoring security issues for test,
    Can Mobile(using celular network) device use jabber application without VPN, TURN, STUN or ICE Server?
2. I heard CUCM interwork with VCS-Control through SIP Trunk, VCS-Control deliver data to VCS-Expressway for Exteran connection.
    If then, Can internal Jabber Desktop user call to External teleprsence deivce such as HDX8000 of Polycom?
3. I know Jabber Mobile clients do not support video presence yet, except for I-PAD.
    So, when does Jabber client support video presence feature? I think I have waited enough.
thank you for inconvenience reading, because of none-mother language.

There are three Airport resets, soft, hard and factory default. It would probably be beneficial if you tried each one in sequence. Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

Similar Messages

Why can't I connect to samsung or htc device via Bluetooth?

Why can't I connect to samsung or htc device via Bluetooth? or can't copy any picture or song from my laptop to Iphone 5?

Because this has never been a feature of iphone/ipad/ipod touch.
Ipod touch/iphone/ipad support bluetooth for handsfree telephone devices, stereo speakers/headsets, some keyboards, some peer-to-peer apps form the app store, and internet tethering where provided by the carrrier.
Otherwise, they will not connect to another phone/device/computer.

Hi there i just update my ipad2 and iphone 4 ios6 and now the bluetooth cannot connect to any other ios device?what i have to do now?

I just update my ipad2 and iphone4 to ios6 but now
My two device bluetooth cannot connect with any other
Ios device.

Are you running Leopard on your Mac, Laurie?
If so, try instead updating to iTunes 10.6.3.25. (That supports earlier models of iPhones running iOS 6, even though it can't run the new iPhone 5s.)
A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3

Why won't my iMac print consistantly to my compatible HP 6500A? I've checked for updates and downloaded the lasted software...still can't print. All my other Mac devices find the printer but the iMac is hit and miss. I'm operating the Mac OS X Lion 10.7.

Why won't my iMac print consistantly to my compatible HP 6500A? I've checked for updates and downloaded the lasted software...still can't print. All my other Mac devices find the printer but the iMac is hit and miss. I'm operating the Mac OS X Lion 10.7.

When you say hit and miss do you mean sometimes you print a whole document with no problems, or do you mean each document has problems? This is from HP's website for your printer:
Your sig says 10.6.7 but your message says 10.7. So if it's really Lion, this printer isn't officially supported. Elsewhere on HP's site it says updated drivers will be available on your Mac via Software Update. Have you run that recently?

Just recently updated an iPhone 4 to iOS 7. Having trouble activating iMessage. It will not connect to network. Any help ?? All connections are fine other apple devices are working

Just recently updated an iPhone 4 to iOS 7. Having trouble activating iMessage. It will not connect to network. Any help ?? All connections are fine other apple devices are working

Hey X300X,
Thanks for the question. I understand you are experiencing issues with iMessages. The following article may help to resolve your issue:
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M.

Can 11g client connect to 10g server?

I am very new to Oracle, so hope this isn't too basic of a question. I thought I saw something through my searches where the clients were backward compatible to older versions of the server. Will this work, 11g client connecting to a 10g server?
I have a custom windows app that uses the Oracle client to pull data from an Oracle server at another location and pushed the data into a MS-SQLExpress database for a local cache to be used during th day. I do not have the source for this custom app or the time to re-create this custom app. We just installed a new Windows 2008 R2 (64bit) server and I just need to get the client back on the new server so the custom app will work again. The old server was running 8.1.7 client, but going to 64bit OS I want to use a more current client to avoid issues with 32bit/64bit compatibility problems.
I am downloading the 11g 64bit client now, but want to make sure I'm not wasting my time and need to get a different client. Please advise.
Thanks!

In general, yes, you can use a later version of the client to connect to an earlier version of the database and vice versa. But that only generally works for a few major releases. Unfortunately "10g" and "11g" are somewhat ambiguous-- both could be referring to one of two major releases.
Metalink 207303.1 is the client/server interoperability matrix. If by 11g you mean 11.2 and by 10g you mean 10.1, the 11.2 client will not work with a 10.1 database. If the client is 11.2 and the database is 10.2, it should be at least 10.2.0.2. If the client is 11.1, the database should be 10.1.0.5 or 10.2.0.2 or higher.
Justin

Can no longer connect wirelessly with other computers

I have an iMac and a Macbook Air. For some reason I can no longer connect wirelessly between the two. They don't show up in Finder. Therefore I can't use "Remote Disk" on my Macbook Air to install programs.
Recently I switched from using an Airport router to a Cisco router. Could this be the problem? I can still connect to the internet through my wireless network, but can't find my computers.

Hello,
All the information you need is printed on the back of the Hub. There are two passwords, one for the Wireless setting (WPA password) and one for access to the hub (Admin password).
(Taken from http://www.jarviser.co.uk/jarviser/images3/newhubpswd.jpg ).
If you have forgotten what you changed the admin password to, then I'm afraid you're lost and you should factory reset your Hub:
http://bt.custhelp.com/app/answers/detail/a_id/11386/~/how-do-i-reset-my-bt-home-hub-to-its-factory-...
Hope this helps

How can I set connection to external XML file with Dreamweaver to buiild AIR app?

Hello,
I try to do simple AIR app in dreamweaver. It's not problem
to use static data. But I'd like to use dynamic data from external
XML file. I try to use Spry and evrything works fine in web browser
but i have problem with loading external XML data into my app in
AIR. Can I simply transform my spry based html app into AIR?
What should I add to do this?
Pawel

Daniel Lichtenwald wrote:
What are the requirements and steps for arranging to receive this large file using File Transfer Protocol (FTP)?
Usually, we don't speak of "receive" when using FTP, since the file is transferred from server to client, so it's more of a case of "download".
At your end, it's simple. You use an FTP client; under SL, that includes Finder and Safari, so you don't even need to get any additional software.
At the other end, it's more complicated; the 'sender' must set up an FTP server on his machine.
Alternatively, you can set up your own Mac as an FTP server, and have the 'sender' connect to you with an FTP client and upload the file; but, if your Mac lives behind a router, then you have more work to do with the router settings.
That's why it's much easier to use the file sharing services mentioned above -- if they are available in both sender's and receiver's locations. (Keep in mind that some countries block access to all those mentioned -- except perhaps <www.transfer.ro>, of which I know absolutely nothing.)

Call log tab jabber client numbers listed as other

Question about the call log for j4w
All our users have 3 numbers in their Active Directory user object
work number
home number
mobile number
when user A calls from any of these 3 numbers user B can see the users name displayed with either work, mobile or home depending on the number he is calling from.
if check the call log i can see the name of User A and if he rang from his work number this is listed as Work but when he calls from his home number or mobile number it shows his name and then the word other (so you have no idea if he rang from his mobile or home number) but it is recognising these numbers belong to this user.
is there a configuration change i can make so it displays either the word mobile or home instead of other?
we are on CUCM 8.6.2 and CUPS 8.6.4 integrated with AD 2008r2.
Many thanks

No also when client remains up and running.
Sent from Cisco Technical Support iPhone App

What can't client connect to RMI server on same machine?

I'm trying to get a client to connect to an RMI server that resides on the same machine, but it's not working. When run, I get the following exception:
java.rmi.ConnectException: Connection refused to host: 121.0.0.55; nested exception is:
java.net.ConnectException: Connection refused
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:320)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:133)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:120)
at java.net.Socket.<init>(Socket.java:273)
at java.net.Socket.<init>(Socket.java:100)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:25)
The machine in question is a Solaris 8 system running Java 1.3. I've checked all the networking permissions, and they seem to be ok. Any ideas as to what might be causing this?

Thanks for the reply! Dumb question: How do I start the registry? I see debugging code that indicates that the server is [probably] being started.
Usually this means that the registry isn't running or
the server isn't running.

Why can't i connect a extern webcam

why cab i conect a extern webcam to my appele pc

Hello, and Welcome to the HP Support Community!
Do you have your ePrint account set to "Allow all users" or restricted to only certain email addresses?
Log into your account at hpconnected.com and check the Device tab. You can see the configuration there.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Can I access Iwork files on GoFlex from ipad, edit them and later on store the edit version back to GoFlex Satellite? For that matter can i do this on any other storing device?

Can I access files of iwork - Pages, Numbers, keynotes, stored on an external hard drive with my ipad. Edit them and then again store them back on the esternal drive?

No. I believe you need to use the Go Flex app to access the drive and of course that means you are limited to only those types of files supported. iWork apps (and others) will not work.

My iPhone 5s bluetooth won't stop searching and won't connect to any other bluetooth device.

I've been trying to pair it with my MacBook Pro but the iPhone won't pair.
Nor will the iPhone pair with my JBL Flip.
How do I go about this issue?

If your iPod is still charging if you plug it to the adapter, let it charge for about 10min, then connect to your computer in recovery mode, explained in this article:
iOS: Unable to update or restore
If it does not charge, you'll have to get it serviced.
Apple can offer you a replacement device, but you'll have to pay for it:
Check the pricing here:
http://support.apple.com/kb/index?page=servicefaq&viewlocale=en_US&geo=United_St ates&product=ipod&select=REPAIR_PRICING

HT3887 Can the iPad connect to an A2DP bluetooth device?

Is the ipad2 compatible with A2DP Bluetooth devices.

OK. On your computer, go to Control Panel, Network and Internet, Set up a new connection or network.
At the bottom of that window, you'll see:
Set up a wireless ad-hoc (computer to computer) network
Set up a temporary network for sharing files or an internet connection.
Click to highlight this and click on the NEXT button.
It will ask you for
Network name (create your own),
Type security (check your Op-Area requirements. I recommend WPA2)
Security Key (required for a secure network)
From there, it will start setting up the new network and step you through it.

Can i connect an external signal generator to the NI7344 to...

Can i connect an external signal generator to the NI7344 to use its
PID characteristics to precisely control the output
I am using the flex motion board (NI7344) to control the force output
of a linear motor. Using contouring and buffer operations i have
successfully created a system which can output a controlled force
which sinusoidal in form. I can achieve a reasonable output for
waveforms of 10Hz, the use of higher frequencies is limited by the
contouring operation ( a frequency of 10 Hz means i can only describe
one period of a sine wave with 10 points ( 10ms between each point =
10Hz). Can i therfore connect an external anologue wave generator to
the NI7344 use and use its PID characteristics to output wave
forms of
higher frequency ??? .....could i output an anolgue wave form from an
E-series DAQ via the RTSI cable to the NI7344 and control this ???.any
ideas or advice would be much appreciated.

Duncan,
You can use a DAQ card to output an analog waveform, but it will be a software call not part of an onboard program. RTSI can be used to pass clocks and trigger signals, so if you want to route a clock signal to do the control you could.
A. Talley

Can jabber client connect to external other telepresence devices?

Similar Messages

Maybe you are looking for