Can Java only system use CTS+?

We have 3 Java only (EP7.0) systems.
We also have a SM7.0(A+J).
Can we configure CTS+ for the EP7.0 using SM7.0 as the domain controller?
Thanks a lot!

Hi Jennifer,
YES it's possilbe. The very basic rational for CTS+ is to support Java based transports.
Please refer to this SDN post for How...to setup CTS+ for your portal
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0ebf83b-6201-2b10-b58b-c14d3d3b6f61?quicklink=index&overridelayout=true
I hope this helps you.
Regards
Sekhar

Similar Messages

CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

Hi Kglad.
I have looked at all of my settings both in Bridge and CS6 Photoshop regarding Camera Raw. I am at a loss how to set the crop tool in cm or inches as I once did - now the only option is to crop using ratios of 1:1 etc etc - This is infuriating as lots of my square crops I could set at 10" x 10'' specifically to print one to one to fit frame and mount size -
Now if cropping using bloody aspect ratio of 1:1 (square) the actual dims of the crop are roughly 4.25 inches x 4.25 inches. this means I then have to open the whole image in photoshop in order to crop at the dims I have set! It was so much quicker in terms of batch cropping in camera raw being able to set dims in centimetres and inches but they have gone and mucked around with it, with the new bloody update! Unless you are an absolute genius and know how I can go back to having an option of CM, Inches and aspect ratio within the custom crop settings? (Please say you do)
here is the new tutorial for CC - my guess is they have scrapped the control we had over the custom crop settings
Cropping Images In Adobe Camera Raw 8

Copy VMWare image of Java only system

Hello,
We are running an SAP Java only System (NW 7.0) with a MSSQL 2000 DB on Windows running VMWare. We are trying to create a clone of that server to create another JAVA only SAP system.
We have changed the Computer Name in MSSQL and that is up and running. We have also changed the instance profile paramters to point to the new Server name.
Couple questions:
1) Is this possible to do with a JAVA only system?
2) The JControl process keeps failing. I've changed the instance.properties file to point to the new server host and when I start the system it keeps pointing back at the old one. Is this file defined somewhere else?
Has anyone done this before or tried it? If you have, can you provide any tips or tricks on how to accomplish this.
Thanks,
Dale Dingmann

For copyng systems, you need to use systemcopy procedure,
is fully supported : --> System Copy and Migration
P.S. in your situation i'm think good to read -->
Note 757692 - Changing the hostname for J2EE Engine 6.40/7.0 installation
Regards.

Running SLD on Java-only system

Can I use a Java-only system for my SLD server when I have ABAP-only servers in my environment. The ABAP-only servers would be sending their information to this Java-only SLD

To setup a gateway service on a Java-only machine do the following:
1.
Edit the profile START_SCS00_##### adding the following two lines
_GW = /usr/sap/<SID>/SYS/exe/run/gwrd $(FT_EXE)
Start_Program_05 = local $(_GW) pf=/sapmnt/profile/<SID>_JC00_#####
2.    Edit the file DEFAULT.PFL adding this line
a.    rdisp/sna_gw_service = sapgw00
1.    Edit the file /usr/sap/<SID>/exe/scs.lst adding two lines
i.    gwmon
ii.    gwrd
3.    Restart JAVA on the server
4.    You can check the status of the gateway using the command:
a.    gwmon   pf=/sapmnt/profile/<SID>_JC00_#####

Table in PI JAVA only system & Report development in JAVA only system

Dear Experts ,
We are migrating from Dual to Single stack JAVA only PI system.
In Dual stack system all the message data are stored in ABAP table from which MONI pulls data .
But in JAVA only system how data is stored ..? and how to access those table ..?
we need a report to develop which will have these data .
Interface name
Date & time of run
Key Data (if possible would like to see key data from the run, for example po number, material number, part number, idoc number would all be considered key data)
Pass/Fail flag
Error Message (only required if the run failed)
How & where to write code to develop this report ...?
thanks
Shakif

Hi Shakif,
Look at this link:
Message details and AuditLog from Java Stack using Custom WebService
and this link about the Java Data Browser:
Open SQL Data Browser - Process Integration - SCN Wiki
Best Regards
Harald

Change timezone in Java-only system

Does anyone know how to change the timezone on a Java-only system?
I have already added the setting "-Duser.timezone=America/Dallas" on the configtool, but when I look at the logs in NWA, it still looks like it is reporting on GMT timezone.
Thanks!

try note Note 834520
Cheers,
-Sunil

EWA for Java only systems

Hi,
I'm searching for a guide to set up EWAs for Java only instances. Currently I have my Java instances in SMSY as system components, but how do I set up the EWAs as only ABAP instances are selectable. I'm using the latest SP, so this functionality should be available finally. I can't find a document about that anywhere, just some very bad documented snippets in SPRO...
Regards,
Pascal

Hi Pascal,
EWA for Java systems is currently in a pilot phase. It will be released with the note 976054, which is currently still being processed internally.
Note 976054 contains a setup instruction for EWA for non-ABAP-components.
Technically, for pure Java systems the "Central SDCCN" of the Solution Manager is used as indeed pure Java systems do not have a SDCCN.
Double stack installations do not make use of the Central SDCCN, using their local SDCCN to obtain the non-ABAP data that is collected by the Diagnostics part of the Solution Manager.
The note will be released in the very near future.
Best regards,
Walter Heibey

How to create logon group in a JAVA only system?

We have a JAVA-only CI and several JAVA-only application servers.
They are all for a single EP7.
How to make sure that no end EP7 user can use CI ?
Thanks! Points!

Hi Jeff,
You might want to check the following documentation for setting up logon groups on your AS Java environment using NW Administrator tool: <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/a9/775a421b5ec153e10000000a1550b0/frameset.htm">Logon Groups Configuration</a>
You can also check this <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=384105">thread</a> which might apply to your environment.
Hope this helps.
Regards,
Joseph

Not able to start the shadow instance in java only system

Hi All,
we are upgrading our portal system from 7.0 to 7.3EHP1 in oracle with HP-UX OS. We have started the upgrade and currently is in deploy shadow instance step of per-processing phase.we are getting error in deploy shadow instance step as below.
====================================================
Could not update components. Deployment of queue Queue_2014.07.17 at 17:00:17 completed with error Deployment error. See log /download/SUM/sdt/log/SWITCH/deploy_api.0.log for details. java.lang.RuntimeException: com.sap.engine.services.dc.api.deploy.EngineTimeoutException: [ERROR CODE DPL.DCAPI.1041] Deploy API could not retrieve the Result after 7200000 ms. Possible reasons: 1.J2EE Engine cannot start. Please check in Sap MMC or jcmon the engine status. -If the server is stopped please check the server log files why the engine cannot start. 2.Engine is up and running but deploy controller could not be looked up due to some Runtime exception. Please start telnet session to the SAP Application Server , check if the tc~bl~deploy_controller service is started. com.sap.engine.services.dc.api.deploy.EngineTimeoutException: [ERROR CODE DPL.DCAPI.1041] Deploy API could not retrieve the Result after 7200000 ms. Possible reasons: 1.J2EE Engine cannot start. Please check in Sap MMC or jcmon the engine status. -If the server is stopped please check the server log files why the engine cannot start. 2.Engine is up and running but deploy controller could not be looked up due to some Runtime exception. Please start telnet session to the SAP Application Server , check if the tc~bl~deploy_controller service is started.
===========================================================
We have observed that, shadow instance service only is not running. we tried to start the shadow instance services manually, same failing again .Only shadow central instance services(SCS) came up and running .Still shadow service is not coming up.
Please find the shadow instance service status.
==========================================================
epqas:eq1adm 50> sapcontrol -nr 02 -function GetProcessList
18.07.2014 01:48:11
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
jstart, J2EE Server, GRAY, Stopped, , , 14997
epqas:eq1adm 51>
===========================================================
Kindly find the attached deploy shadow instance log and shadow work directory files. Please suggest me, if you came across this issue.
Kubendran A

please remove the archive, because if you use cache_archive, you can not use archive at same time for the same jar file.
Cooljavaus

Can java mail be used for distributed exchange server?

H,
I am trying to connect to MS Exchange Server to read my mails using Java Mail API.
I have a questions about using it with Exchange server.
We have 6-7 exchange servers in our company and different users have mailboxes on different servers. My internet mail application will be used by everybody in the company.
But while connecting to exchange server using java mail I can only cnnnect to one server and port. What happens when user mailbox is not on that server. How can I use javamail in this scenario where user mailboxes are on separate servers??
Thanks
[email protected]

You said that you can connect to Exchange server my you help me with this because i cant connect to Exchange server, mayby you can post me a code example? Thanks

EWA for java only systems - how to get ewa at the end

Hi gurus,
I have a solma system in which all smd agent setup for portal was done and also all tasks (to collect data for EWA) are running well for ep systems aswel.
We are at sps 17 in solman.
I need to generated EWA for this portal system.I have no idea of how to generate it at the end.and i need that report routed to my mail.Some one please let me know how to generate EWA(after setup of every thing) and how to route it to mail address.
Thank you.

Hi ,
Thanks for few inputs
I have my EP system in system components in java (sub). and also in systems->netweaver->I have cinfigured my EP.But after this also I am unable to schedule it in DSWP.Can any one of you give some thoughts.(Seems I am missing some thing here - can any one let me know the procedure here to cross verify)
Rohit,I followed that user guide with out missing a single point!.But still I am unable to pull my report..
Tried manually with xml file(generated for EP from SM) and given it in DSM but it is saying no data available.
Seems nothing is coming from my EP.
Below are few exceptions in xml file.
1) introscope data is missing
Cannot find agent name Business-Sandbox_SEP_server0 for
instance[IInstance: key=1178028371063144, type=[Server],
nodeId=13865850, creation=Tue May 01 09:05:01 CDT 2007]
for thie exception - not sure why my SM is not resolving EP's sid.
Please not - SMD is running fine in EP
Any thoughts?
2) PAR data is missing
ORA-12505, TNS:listener does not currently know of SID given in connec descriptor
The Connection descriptor used by the client was:
Thank you.

Why can I only print using Adobe's print icon?

I can't use the CtrlP option or File->Print. This also means that I can't find a way to print in grayscale. I have the newest download of Adobe and I have a Mac OS.

I used the atlookup command. From the wired MDD
ff39.f7.fc Asant?Talk 9483E0FF:Asant?Talk
ff40.ad.80 Chris? Power Mac G4 (AGP graphic:Darwin
ff0d.37.04 Dave?s laptop:Workstation
ff0d.37.fc Dave?s laptop: Macintosh PowerBook
ff39.f8.80 Laserwriter 4/600:LaserWriter
ff48.6e.80 The family computer:Darwin
ff48.6e.81 The family computer:AFPServer
From the AGP G4 only one entry
ff40.ad.80 Chris? Power Mac G4 (AGP graphic:Darwin
I guess that shows it's not on any network. Is this a network problem rather than appletalk?

Can Solaris Os System use as a server edition

Hai guys i am new to solaris system, and my company selected solaris system as our server edition....
Can any one enplane me the solaris OS system could we use as a server edition ?

You could run a Mac Pro using OS X Server. This would allow you to provided services to your small office network, and still use the Mac Pro as your desktop machine.
However, depending on what you are actually intending to use the server for, you may be better off with an older Mac to use for your server. Simple AFP and Windows file services are easily handled by just about any Mac, with the older Quicksilvers through the G5's being good choices for use as servers.
Having a dedicated server, instead of one sharing use as a desktop, means a more stable server for everyone else to use. It also will allow for a more consistent backup and archiving, then a dual role machine will usually be used for.
However, if you do not have the funds to repurpose an older machine, or buy a new machine for your server, then sharing a desktop with a small office group is indeed doable.
As for running Autocad and the server os at the same time, the answer is probably no. The reason is the bootcamp based Windows XP is a one or the other proposition, you are either running WIndows XP or OS X but not both.
On the other hand, if you use virtualization software, such as Parallel you can run both OS X and XP at the same time, however, current released versions of Parallel have limited graphic acceleration and 3D support. Newer beta versions of Parallel are starting to include better graphics support, including 3D. So the question is if AutoCad will run reasonably well under Parallel or not. I think the answer will depend on how you use AutoCad. If you use it mostly for 2D drawings, then it will probably run fine. If you use 3D rendering, you may need, at least for the time being, need to use Bootcamp to run Windows XP natively and get full graphics support.
Tom N.

How to create a support message in a JAVA only system?

PLease help, thanks!

Hi Jennifer,
Work Center are the new interface within SAP Solution Manager shipped as of Stack 15.
They are developped with WebDynpro, which allows an easy Web integration.
http(s)://<host>:<port>/sap/bc/webdynpro/sap/ags_work_incident_man
http(s)://<host>:<port>/sap/bc/webdynpro/sap/ags_workcenter
Work Center Incident Management would handle
- Create Message
- Follow-up on created message (reply, confirm, add texts, add attachments)
for the end user, who created the incident.
Due to the Web Access, granting authorizations is quite easy and the user can not perform unexpected tasks.
Usage requires ideally a name user in SolMan system for Logon and a Business Partner.
See also these threads to setup and adapt Work Centers:
[Setup Work Center|Re: SOLMAN SP 15 - NOT ASSIGNED TO WORKCENTER]
[Adopt Work Center|Re: Incident Management Work Center Customizing]
(By the way, current SolMan release is 7.0, as 4.0 was renamed)
Regards,
Ruediger
Edited by: Ruediger Stoecker on Jun 4, 2008 5:19 PM

Can iDVD only be used for a DVD?

What if I don't want my video on DVD? That is I just want a video that will play onscreen, streaming, and so on, but need DVD like functionality such as menuing, nice intro, etc.
If not what tool do I use? Thank you.

What about Quicktime Pro? If you start just the app it goes to the Apple homepage. Lots of menu items there. Or is that some sort of embeded xml page?
That's a good question. QT can clearly go to a URL and display the contents - if they are in the correct format.
Why don't you go over to the Quicktime forum and see if anybody knows how to do it.

Can Java only system use CTS+?

Similar Messages

Maybe you are looking for