Can JVM or CVM run at Dos6.22?

Hello,
I have some questions about JVM/CVM and programming my terminal with J2ME.
I have a terminal with 8M RAM and 2M flash, which CPU is 486 class processor,operating system is DOS 6.22,486 PC-compatible. It integrate a user-accessible PC Card slot,which can be equipped with wireless network card from Lucent,Symbol,Proxim.
In our project,we want to program the terminal with J2ME,and by the wireless network card the terminal can access the database on the server. Can we do it? If we can, could you please tell me which product of J2ME I can use, and give me some advice on how to realize this.
Thank you very much.
Best Regards,
Deng Wu
[email protected]

I think you should think of replacing DOS with Linux. Linux has bigger support for different hardware than old DOS. It's true 32bit operating system and even if you replace your 486 CPU with ARM or RISC chip your linux will run - and CVM (maybe) too.
Btw there was an old DOS-port of Kaffe VM which is stopped from years.
If you wish you may contact transvirtual and ask them for DOS version.

Similar Messages

  • My Powerbook will not power up, but I can hear the fan running...

    Please help!! My Powerbook will not power up, but I can hear the fan running when I press the power button to attempt to power it up. I just received a new power adapter because it wasn't working properly and it was doing this before and then it worked for a week and now it will not power up at all. It just starts the fan but nothing else turns on. When I plug the adapter, with the battery still connected, it will look as if it is charging but then the light on the plug turns from green to orange then off and doesn't power up at all. If I take the battery out and plug in the adapter, the light stays on but it does not power up except for the fan noise. Does anyone have any suggestions? I also followed the two articles listed online in regards to resetting the power setting and the command + alt + P + R as well. Nothing works. Thanks in advance.....

    Same here. If I start up with the power adapter attached, it starts up fine. If I try to start up from battery only, the fan comes on, the sleep light comes on but nothing else happens. I tried letting it sit that way for about 15 minutes and nothing changed. I tried attaching the power cord while in this mode and nothing changed. I tried the PMU reset a couple of times but nothing helps.
    This computer is just over 1 year old and I have not had any problems with the power cord (3rd party), the battery, or any problem like this before. It started after a proper shutdown last night and attempt to start without the power cord this afternoon.
    Any answers to this yet? I think I'll call on this and report any success to this discussion.
    15" PowerBook G4   Mac OS X (10.4.8)   1 GB DDR2 SDRAM, 100 GB HD

  • How can I get iTunes running on Windows XP as well as a newer laptop running Windows 7 to both recognize my new iPhone 4S?  It seems to work fine with Win 7 PC so far, but not at all with the XP OS separate laptop.

    How can I get iTunes running on a Windows XP machine as well as, separately on a newer laptop running Windows 7 to both recognize and sync with my new iPhone 4S?  I have different libraries on each machine which I need to sync with the iPhone, both in iTunes.  It seems to be workiing fine on the Windows 7 machine, but not even reconizing the device at all in iTunes on Windows XP.
    Thank you for your assistance.

    Hi turingtest2 - thanks for the reply. As you say It is how it is - and I have three workstations in this home (not counting three for my children and one for the family) and I pretty much always have more than one OS on each - that's how it is for me. I shouldn't have to worry about how many OSs I have (or how often I change them) just to have music while I'm working - through the PC sound system that is. I never have to worry about any other software, only iTunes. Once in a while (in the past) I've made a vendor call if I changed to many things to often (like CPU, GPU, memory, etc - or even a replacement MB) - but that hasn't happened in a couple years (at least since Vista) so I think (hope) they have fixed that for good. And even then it was a quick call and problem resolved. The only (glaring) constant problem is iTunes - limiting my own use of my own music (by counting an OS as a physical PC). Even with VM (which is just another OS) - although you can Attach things to multiple active OSs - it's still your own (purchased) music - and all on one PC. Thanks again!

  • I have a Macbook pro 2009 with Snow Leopard.  Which system can I install without running into complicated problems which I will not be able to solveby myself? (Mountain Lion, Mavericks, Yosemite?)

    I have a Macbook pro 2009 with Snow Leopard.  Which system can I install without running into complicated problems which I will not be able to solve by myself- a person with limited problem solving abilities. (Mountain Lion, Mavericks, Yosemite?)

    It will make it easier to help you w/ your problem to know the  size and RAM installed.
    "Yesterday I couldn't update the maps on my Garmin because it said the OS I had wouldn't work"
    What OS will your Garmin work with? Funny there was someone else that did that and upgraded to Yosemite and regretted it.
    I'd say Lion if your Garmin is compatible.
    Both Lion and Mountain Lion are downloadable from the Apple Store:
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
    The OSs will get more resource hungry the higher you go.

  • Satellite M30X-129: Can recovery CD be run from an external drive?

    My wifi appears to have packed up - recognises wireless networks nearby but won't connect to them - so I am trying to use the Product Recovery disc in the hope that this might restore the wifi.
    However, the DVD Multi Drive is not working properly - the light flickers briefly to indicate some sort of activity but no disc shows up in My Computer. I'm thinking that if I buy the External Drive, I can run the Product Recovery disc from this.
    Is the Toshiba External DVD SuperMulti Drive (PA3454U-1DV2) compatible with the Satellite M30X-129 P-M 735? Can Product Recovery be run from an external (bootable?) drive?
    Any advice would be greatly appreciated!!!

    Hi
    According to this Toshiba page the drive is compatible with your unit:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/options_and_accessories_search_by_model.jsp?servic e=EU&selSeries=-1&selFamily=2326&selCategory=2319&family=2326&selP roduct=98795
    The fact is that only this boot device options are available: USB-FDD/HDD/ODD/LAN
    I know that you can only boot from the external CD/DVD drive if the device support this option and the unit.
    In my opinion to be100% sure you should ask the ASP for the opinion.
    But know another question: Did you boot from the recovery CD to recover the OS?
    If you want to recover the OS you have to boot from this CD and not to start it under Windows. Check it

  • TS1587 I tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks Maja

    My iMac won't start up, or wake from sleep.  I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up.  Turning it on, you can hear the fan run, but the display stays dark.  Any ideas what to do?  Thanks!

    Mac doesn't boot
    Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
    Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
    Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
    Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
    Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
    [edit]
    What to do
    First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
    If that doesn't help continue doing the steps from below:
    1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
    2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
    3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
    4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
    5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
    6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
    7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
    7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
    8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
    8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this.

  • I'm new to GB and I'm trying to record solo vocal with a backing track. I can get the track running OK but I can't seem to record. I think when I press record the backing track mutes and I need it running.. Thanks in advance!

    I'm new to GB and I'm trying to record solo vocal with a backing track. I can get the track running OK but I can't seem to record. I think when I press record the backing track mutes and I need it running.. Thanks in advance!

    guess what it says java file. So yes i'm sure. Sarcasm. Not the best way to encourage a total stranger to help you. Then there's
    Sorry if i wasn't more clear but was that response needed?No it wasn't needed, but I'm not the one asking for help so I have the luxury of not worrying too much about it. It's extremely frustrating trying to drag relevant information out of someone, and makes one less inclined to bother.
    Anyways, there's still nothing in this thread that actually explicitly says "there is a file called VolcanoApp.java in the directory where I'm running javac from" and I really can't be bothered banging my head against the wall any longer. You've made a silly mistake, or a false assumption. We all do it from time to time. My advice is, take a break, go for a walk and re-visit this in a while. You'll probably spot the mistake right away.

  • Can't get MDB run-as to work

    I am trying to configure J2EE security on OC4J standalone 10.1.3 for a set of EJBs. I have a stateless session bean that I want to control access to. I have assigned method permissions to it so that only a certain role can access it. I then configured a client with J2EE credentials for a user in that role and remote EBJ lookup/access is working great.
    The problem is that I also have a JMS-based MDB in the same application that needs to access the session bean, but I can't get the run-as declaration to take effect. When the MDB tries to call create() on the session bean's home interface, the following Exception gets thrown:
    ERROR javax.ejb.AccessLocalException: anonymous is not allowed to call this EJB method, check your security settings (method-permission in ejb-jar.xml and security-role-mapping in orion-application.xml).
    Below is the relevant sections from my deployment descriptors, if anybody has any input I'd appreciate it.
    -Patrick
    <!--ejb-jar.xml-->
    <enterprise-beans>
    <session>
    <ejb-name>MyStore</ejb-name>
    <security-role-ref>
    <role-name>MyApplication</role-name>
    <role-link>MyApplication</role-link>
    </security-role-ref>
    <security-identity>
    <use-caller-identity />
    </security-identity>
    </session>
    <message-driven>
    <security-identity>
    <run-as>
    <role-name>MyApplication</role-name>
    </run-as>
    </security-identity>
    </message-driven>
    </enterprise-beans>
    <assembly-descriptor>
    <security-role>
    <role-name>MyApplication</role-name>
    </security-role>
    <method-permission>
    <role-name>MyApplication</role-name>
    <method>
    <ejb-name>MyStore</ejb-name>
    <method-name>*</method-name>
    </method>
    </method-permission>
    </assembly-descriptor>
    <!-- orion-ejb-jar.xml (I've also tried the same security-role-mapping in orion-application.xml -->
    <assembly-descriptor>
    <security-role-mapping name="MyApplication">
    <group name="users" />
    </security-role-mapping>
    </assembly-descriptor>

    Password for what?

  • My Earth and Beyond game ran with XP, can't install or run it on 8.1... need patch or driver ???

    I have an older PC with XP, my game Earth & Beyond ran fine... this new PC with 8.1 can't install an run. There must be a service pack or patch or driver....

    mckaysr wrote:
    I have an older PC with XP, my game Earth & Beyond ran fine... this new PC with 8.1 can't install an run. There must be a service pack or patch or driver....
    You found and hit the limitation of old software are unable to install on newer O/S. This is software limitation nothing Win8 can do to help you install a XP game or Program on Win8.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Can a macbook pro run windows operating system?

    can a macbook pro run windows operating system like xp, vista or windows 7?

    nathalie1985 wrote:
    Is it best to run Windows 7 in Boot Camp, or would it be better to use VMWare Fusion or similar? I have a MacBook Pro Intel Core 2 Duo (OSX 10.6.8) and I also have a Dell laptop solely because one program that I need to use for work is only available for Windows. I would love to consolidate to my mac but am afraid installing Windows will ruin it!
    It all depends on what your useage of Windows will be, for playing games install it in BootCamp, for word processing, spreadsheets, email. browsing etc a virtual Machne will be fine.

  • Where can I download temple run game free into my ipad

    From where can I download temple run game for free?

    Assuming it is available in your country, from the app store.

  • How can I install and run a Windows program on my MacBook Pro/?

    How can I install and run a Windows program on my MacBook Pro?

    You have several options.
    1, Use a Virtual Machine like Vmware, Parallels etc... to Create a Virtual Windows Installation and Run your program in there.  A Virtual MAchine will runn in a Window on your Desktop and share your Mac's resources RAM HD space processor. Your MAc desktop will still be available while you run Windows install.
    http://www.parallels.com/
    2. Install Windows on a partition using Bootcamp. It will run a full installation of Windows you can boot into, and run your programs.  The Mac desktop will not available until your reboot the computer and start in OSx instead of Windows.
    https://www.apple.com/support/bootcamp/
    3. Use Wine /  Winebottler to run the Application without the need for a complete Windows installation.
    http://winebottler.kronenberg.org/

  • Can my 2006 iMac running OSX 10.4.11 be upgraded to move my                                                                                                                               stuff to the cloud?           stuff to the cloud?

    Can my 2006 iMac running OS X 10.4.11 be upgraded to move my stuff to the cloud?

    Hi..
    Sorry but no. iCloud requires a Mac running v10.7.2.
    Read here >  Apple - iCloud - Learn how to set up iCloud on all your devices
    If your Mac meets Lion's requirements:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OSX v10.6.6 or later (V10.6.8 recommended)
    7GB of available spare
    You may be able to upgrade your Mac to Lion.
    Read here >   Lion upgrade questions: Apple Support Communities

  • Can Reports 3.0 run a host command?

    Can Reports 3.0 run a host command like in Forms 5?
    null

    Hi! Bill
    ANS: NO
    Bill Fox (guest) wrote:
    : Can Reports 3.0 run a host command like in Forms 5?
    null

  • Tool like PathPing that can pinpoint packet loss and can be configured to run for 24 hours

    Does anybody know if there is a simple tool like PathPing that can pinpoint packet loss and can be configured to run for eg. 24 hours. I need it for windows XP preferable a cmd line tool like PathPing. Thanks Simon.

    Thanks for your answer. I already downloaded winmtr.
    Regards
    Simon
    From:
    namohamm
    To:
    Simon Vyrdal/Sweden/Contr/IBM@IBMSE
    Date:
    2010-12-30 08:29
    Subject:
    New message: "Tool like PathPing that can pinpoint
    packet loss and can be configured to run for 24 hours"
    simonvyrdal,
    A new message was posted in the Discussion thread "Tool like PathPing that
    can pinpoint packet loss and can be configured to run for 24 hours":
    https://supportforums.cisco.com/message/3258861#3258861
    Author : Nael Mohammad
    Profile : https://supportforums.cisco.com/people/namohamm
    Message:

Maybe you are looking for