Can K7T Pro 2A support 80G HDD?

Hi people!
Can u people kindly advise me whether can this K7T Pro 2A support a ATA 100 80G HDD? i need to get a new HDD as the one i m using having bad sector. wat is the biggest HDD it can support???
Please help me. Thks alot!
Regards --- Max

http://www.msi-technology.de/produkte/produkt.php?Prod_id=99
--> 160GB max.

Similar Messages

  • Can ms-6119w support 80G hdd?

    I bought a new 80G hdd, but my ms-6119w mainboard cannot recognize it. how can i use it?
    can i fdisk it in other pc, then put back to my pc?

    Assaf:  that's true, if you don't want to boot from the larger drive.  However, in the case of wanting to boot, say from a 80GB drive, would it not be necessary for the BIOS to recognize the drive. I think if the BIOS does not recognize the BOOT drive, you're pretty much dead in the WATER.
    I am beginning to BELIEVE in the case of the MS-6119, it's almost easier to get a RAID card, set the BIOS to boot from SCSI, and call it a day.
    The RAID solution appears much EASIER than jumping through the MS 6119 BIOS confusion/FIASCO.  NEVER another OEM board for me - ONLY RETAIL boards - the support IS soooo MUCH BETTER  :D

  • Does K7T Pro ver1 support IBM 120Gb HD?

    I'm thinking of buying a IBM 120Gb HD, so it would be nice to be sure that my motherboard (K7T Pro VER1) does support that HD size. I believe I have the latest BIOS - doesn't remember the correct version, but I updated it a fem months ago...
    Thanks in advance!
    Tomas

    link

  • K7T Pro (MS-6330)

    I have a k7t pro and I want to get an athlon xp 1500+ in it. I know its not going to use the full potential of the processor but it is cheaper than an amd athlon 1.2 tbird.
    I was running an amd x 1800+ on it before because i got it in a pulled system for free. it worked fine but will a 1500+ work stabily?

    Dear Assaf !
    'Since the K7T Pro only supports 200MHz FSB an AXP 1500+ (1333MHz) will only run at 1000MHz.'
    This is true if you don't modify the processor.
    On the other hand if you unlock the processor (paint the L1-bridges), paint/cut the L10 bridges and change the multiplier, then you can run the CPU at it's full speed.
    I am currently running a XP1800+ (1533MHz) on a K7T Pro2 board with 102MHz FSB and a mult. of 16 (8 in BIOS +8 by CPU) at 1.63 GHz.
    Regards,
    /ErnyH

  • Hp pro 3125 supports 600 watts power supply

    Can HP Pro 3125 supports 600 watts power supply ?
    Can HP pro 3125 PCIe supports ddr5 graphic cards?
    This question was solved.
    View Solution.

    You would be better served by joining the HP Business Enterprise forum and posting the question there.
    The pc you are asking about is a business model.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • K7t Pro 6330

    I want to put on a MSI K7T PRO an AMD thrton 2000+. If Would I update my mb with the last bios version, may my pc work? (i'm sorry for some error but i'm Italian)
    P.S: Speak simple so i understand you

    It appears the highest CPU that board will accept is a 1.2 Athlon Thunderbird.
    K7T Pro CPU Support See here.

  • Msi k7t pro and hdd crash

    Hi.
    I have a problem and i hope some of you can help me.
    I have msi k7t pro and maxtor diamond max plus 8. disk crashed before few days after using it 3 months. Before that i had maxtor 540 series and he crached after 18 months of use.
    Two disk had spin up and seek time problems. Whell at least siguardian "sad that".
    Could this hdd crash be from nonquality disks or the could be caused from some other part of pc.
    And now i have option to chance maxtor with seagate.
    What do you thing about seagate disks.
    thanks  

    a poor psu is all i can think

  • K7T Pro V1 sound problems and CPU support

    I have a K7T Pro V1 motherboard.
    I can´t use onboard sound, because when I try to locate it (Windows 2000) on Add New Device, appears blue screen and text "Hardware malfunction. Call your hardware vendor for support. The System has halted".
    What I can do? ?(  ?(
    I also would like to know why this motherboard does not support Duron Morgan processors only Duron Spitfire -versions?  :(  :(
    Thanks for your help!    

    I have enabled all in BIOS:
    OnChipSound    Enabled
    OnBoardLegacy Audio    Enabled
    Soundblaster   Enabled
    The system does not found new device automatically and when if I try to find new device manually, appears that error message and I have to boot the computer again.
    I just wonder is the problem onboard?
    About CPU´s....
    Rob454 told "...theyre not officially supporting  the Duron Morgan Cpus".
    Does  this mean I can´t use Morgans att all (even 900 or 950)?
    I mean does these 900 or 950 Morgans also need SSE support?
    And if I´ll try to use for example Morgan 1.2 Ghz does it work att all (or read as Athlon Thunderbird)?

  • Can i clone my macbook air HDD into an SSD and then install that on a macbook pro??

    i Have a macbook air 2013 with mavericks and my brother has a 2012 macbook pro with yosemite, i want to keep mavericks, can i clone my air's HDD into an SSD and install that SSD into the pro??

    Yes, although your MBA does not have an HDD. It has an SSD. Just put the new SSD into a dock or enclosure, clone your drive to it, then install the new SSD into the MBP.
    Clone Yosemite, Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Destination means the external SSD. Source means the internal startup drive.

  • Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date.

    Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date.

    Problem is that my pdf files look terrible although I have MacBook Pro (Retina, 15-inch, Mid 2014). I have Adobe Creative Suite Design  Standard version 6.0 (Mac). I have installed every possible update. I think problem is that for some reason my CS doesn´t support retina display? If I view a pdf file in iMessage, it looks fantastic. But if I open the same document in Adode Acrobat Pro, it looks awful. What can I do?
    Thank you so much for your help.
    Pekka
    Pekka Saatsi
    arkkitehti SAFA
    SAATSI arkkitehdit oy
    Bysmedsintie 56
    06500 Porvoo
    040 5955933
    [email protected]<mailto:[email protected]>
    www.arks.fi
    Anubha Goel <[email protected]<mailto:[email protected]>> kirjoitti 24.3.2015 kello 4.10:
    You have been mentioned
    by Anubha Goel<https://forums.adobe.com/people/Anubha+Goel?et=notification.mention> in Re: Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date. in Adobe Community - View Anubha Goel's reference to you<https://forums.adobe.com/message/7335644?et=notification.mention#7335644>

  • Can macbook pro 15 in i7 2.2 GHz support 16GB ram

    Can macbook pro 15 inch i7 2.2 GHz support 16GB ram?

    Yes.
    But Apple only says/does 8GB and charges $435 to do it.
    If you want to save a ton of money, you can do 16GB yourself for $280 and a DIY kit.
    Doesn't break the warranty as long as you don't break anything in the process.
    http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3_133 3MHz_SDRAM
    You might also want to shop over at Crucial.com as well,
    http://www.crucial.com/index.aspx

  • Logic Pro 9 will not load because it needs Pro Application Support version 5.0 Can someone help?

    I have Logic Pro 9.1.4  When I attempt to open the application, I get the following message: 
    Wrong Pro Application Support version installed.  This version of Logic Pro requires Pro Application Support 5.0 (883.0) or newer.  ProKit: 722.0 (OS BUILD 9L31a)  I have tried to find Pro Application Support 5.0 as a download or update without success. I am currently on a MacBook Pro running OS 10.5.8  Any help here would be appreciated!
    Thanks

    Hi Ana,
    This is it.  Once I installed, Logic opened fine.
    I do have another question.  After updating Logic Studio, I now have both Logic Pro 9.0 and 9.1.4 and Logic Node 9.0 and 9.1.4  Do I need both of these on my hard drive?  Can I delete the 9.0 version?
    Thanks!
    David

  • Can Macbook pro 2012 with GT650M support 3d vision via bootcamp

    can Macbook pro 2012 with GT650M support 3dvision via bootcamp
    For sure GT650 is 3d vision supported, but anyone ever made test that you
    can watch 3d movie via windows under bootcamp on new macbook pro
    Thanks..

    After updating NVidia driver newer than 267.76,
    I got black screen after Windows Logo shown during reboot.
    After countless annoying tests,
    I installed the newest NVidia 285.79 driver without problem finally.
    My original prefered display configuration:
    link the primary monitor with HDMI port
    I already followed the GeForce Driver Installation Guide, step by step,
    http://forums.nvidia.com/index.php?showtopic=169555
    but there's still black screen after reboot.
    THEN, I TRIED TO USE mini-DISPLAY PORT INSTEAD AND REBOOT AGAIN,
    video signal was connected to my DELL 2707W(only DVI port)
    by MiniDP to HDMI adapter/HDMI-DVI cable.
    The display is NORMAL NOW !!
    Root Cause assumption:
    Maybe the driver newer than 267.76 always regard miniDP as primary signal output port,
    even if you set the HDMI port as primary.
    I think this is a serious bug, but no solution after mote than 30 driver updating.
    The following configuration worked on my Mac mini 2010 system:
    mini─miniDP to HDMI adapter─
    HDMI cable to HDMI splitter─┬HDMI-DVI cable─Dell 2707
                                                  └HDMI cable─ 3D projector
    but I found that the configuration can't play 3D video...
    So I changed the configuration to:
    Mac─miniDP to HDMI adapter─HDMI-DVI cable─Dell 2707
          └HDMI cable─ 3D projector 
    For your reference.   

  • Can't install Pro Application Support 3.0 onto 10.3.9

    Topic says it all, sort of. DL'd Pro Application Support 3.0 to install on a Mirrored Drive Doors ("Wind-tunnel") G4 running 10.3.9, which appears to have stabilized on aninstall of 10.3.9, QT still at 6.5.2. Nogo on the install of Pro Application Support 3.0. DL works fine, file looks great, install proceeds smoothly, but when the drive icons are shown in the next to last step, ticking off the drive with Logic Pro version 7.1.1(8885) elicits the red exclamation point. What gives - anybody know?
    mb
    PM G4 MDD DP 1.0GHz 1.75RAM   Mac OS X (10.3.4)   PT/Mix+, Capybara, MIDI doodads, acoustic stuff

    There are two versions of Pro Application Support: one for 10.3 and the other for 10.4. Are you sure you got the right one?
    Also, there is a newer version of it (3.1). For 10.3.9, and for For 10.4.
    MDD Dual 1.25 G4 | 2GB RAM |   Mac OS X (10.4.4)   | Logic Pro 7.1.1 | AMT8 | Delta 44 | SoundDiver 3.1 PB2

  • HT4407 i can't download  windows support driver for my Macbook Pro 13" end 2011

    Everytime i tried to download Windows support software from Boot Camp Assistant, i got an error message like "Can't  install Windows support Software because you are not connected to the internet". Can someone help me please !!!!

    Check your Network control panel and turn off Auto-Proxy setting.
    This is one of the top #4 "how can they do this' pet-peeve errors.
    The other is the often slow 8 hrs to download 600MB even on 10Mb+ cable.
    Another, 'the drive cannot be partitioned because there isn't enough contiguous unfragemented free space; some files are locked and cannot be moved."
    If auto proxy isn't it, router/modem and DNS settings.

Maybe you are looking for

  • Sinlge select query in diff schemas for same table(Indentical Structure)

    Scenario : Table XYZ is created in Schema A After an year, the old data from the previous year would be moved to different schema. However in the other schema the same table name would be used. For eg Schema A contains table XYZ with data of 2012 yr

  • How to track an ipod touch after it is stolen?

    Hi; my sister had an ipod touch stolen at a school from her son. She informed law enforcement and apple. Apple states: they cannot track the device. All devices have a MAC address assigned to them. The moment someone tries to re-register the device;

  • Levels in SAP Certification

    Hi, I have 4 years of experience in SAP MM and recently submitted my CV to SAP India for evaluation and they are confirming that i am eligible for "Associate Level" direct certification. After knowing that there are Professional and Master level cert

  • KeyLocation.LEFT / .RIGHT won't work on a Mac keyboard

    I want to differentiate the LEFT SHIFT key on the keyboard from the RIGHT SHIFT key. The code below will do that on my PC Laptop but not on my Macbook Pro. Someone knows a workaround or the reason why? Thanks! -Marek PS: the sample  code below is not

  • Nexus 5k connected to dual 4506-E w/VSS

    We're in the process of several upgrades. Part of these upgrades include turning on VSS in our core on two 4506E and installing a Nexus 5k with UCS in the data center. I'm planning to configure the links between Nexus and 4506E as layer 3 port channe