Can Kin TwoM lock screen display date?

When I turn on my lock screen, it displays the time (for easy access) in the corner, but can it also display the date?

The only problem with this, is you have to wait for the larger time icon to minimize to the 'standard' dashboard icon. And in my opinion, this takes way too long..like 3 secs or so. It is really inconvenient, and 9 times out of 10 i find myself unlocking the phone to check the date. It really is a shame they don't have an option to by default show the dashboard on the unlock screen.

Similar Messages

I wanted to keep my locked screen display with the time and date from turning off is that possible

So I enjoy my locked screen display with my chosen picture because it has the time displayed nice and big and its a cool nightlight but the locked screen display/wallpaper/time with date always goes black after 13ish seconds of locking it is there no way to let the locked screen stay on while charging? because it is awesome if it could stay on as a nightlight also so i dont have to press the lock button to see what time because the normal display is ugly am I just being super picky or am I not the only one who agrees or maybe it does exist im just stupid please respond when you can also thanks for reading much appreciated.

wjosten wrote:
Again, there is NO WAY to do what you asked: display the time constantly.
I have a clock app that displays the time constantly on my iPad. I use it as a bedside clock. Many clock apps have the ability to disable autolock just within that app. Whether there is one that lets you pick your own background, I don't know but I wouldn't be surprised if there were, based on the number of clock apps out there. While what I'm suggestion is not precisely what the OP asked (display the system lock screen), it seems it might be a possible workaround.

My iPhone 5 having a problem that I can open my lock screen but I cannot slide open my phone even Slide to power off too, It just cannot slide.

My iPhone 5 having a problem that I can open my lock screen but I cannot slide open my phone even Slide to power off too, It just cannot slide.

Hello MarvanCheong,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Restart your device
Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
Clean the screen with a soft, slightly damp, lint-free cloth.
Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
Best of luck,
Mario

Can't get any screen display (nano 7th gen)

can't get any screen display (7th gen nano) -- yesterday had low battery and it may have been "a little sweaty" wet, charger all night -- still can't get it to "turn on"

Hello garlaham,
I would be concerned too if my iPod nano's was not powering on. I recommend following the steps below:
Will not turn on or screen remains dark
Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Press and hold the Sleep/Wake button and the Home button until the screen goes dark. The Apple logo should appear after a few seconds, then the Home screen should appear.
If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
If the screen remains dark and will not turn on, then your iPod may need service.
I got this information from the following article for the 6th generation iPod nano. The steps are the same, except I updated the second step with the reset for the 7th generation iPod nano:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
How to reset iPod
http://support.apple.com/kb/ht1320
Thank you for using Apple Support Communities.
Best,
Sheila M.

I'd like a basic icon in the lock screen to indicate Text, Email etc. Seems all I can have in lock screen is full alert (with or without detail) or am I missing something?

I'd like a basic icon in the lock screen to indicate Text, Email etc. Seems all I can have in lock screen is full alert (with or without detail) or am I missing something?

I'd like a basic icon in the lock screen to indicate Text, Email etc. Seems all I can have in lock screen is full alert (with or without detail) or am I missing something?

Can Kin TwoM Play Cached Games?

Hi, new to the forum as I'm considering getting a Kin twoM (same old story - don't want to buy a data plan, maybe best feuture phone available).
I was curious as to web page caching. I know you can pin web sites to the home screen, and playtouchgames is one of those sites mentioned. I just wanted to confirm - do you have to have an active wifi connection to play these games? I was hoping that after playing a game once while connected, maybe the cached game would still be available for times when wifi was not available.
I doubt it, but I'm hoping! Thanks

nationalacrobat wrote:
Hi, new to the forum as I'm considering getting a Kin twoM (same old story - don't want to buy a data plan, maybe best feuture phone available).
I was curious as to web page caching. I know you can pin web sites to the home screen, and playtouchgames is one of those sites mentioned. I just wanted to confirm - do you have to have an active wifi connection to play these games? I was hoping that after playing a game once while connected, maybe the cached game would still be available for times when wifi was not available.
I doubt it, but I'm hoping! Thanks
Hi nationalacrobat,
I have checked my resources and I was not able to find any information indicating that Kin TwoM is capable of playing games like the one outlined on your post without a WiFi connection present. You will need an active WiFi connection to play such games.

Yoga 8 and 10 - KitKat 4.4.2 - Lock Screen Display

After upgrading to KitKat 4.4.2, some customers report the lock screen on their Yoga 8 or 10 tablets (B6000-F/H or B8000-F/H) does not display the application currently running when it is tapped to unlock. This is noticable when music is being played and the cover art does not show on the lock screen.
Please note that Lenovo has escalated internally on this issue. I was personally able to reproduce these reports.
These reports originated from this thread: http://forums.lenovo.com/t5/Idea-Android-based-Tablets/KitKat-roll-out-for-Yoga-Tablets-starting-Jun...
My personal thanks to the forums members who provided feedback to help identify post-upgrade symptoms.
Thank you for your patience,
Amy Tupper
Technical Resolution Lead, Pervasive Issues
Lenovo US
ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996
Solved!
Go to Solution.
Attachments:
4.4.2 Lock Screen No Cover Art.jpg ‏80 KB

KitKat OTA V28 was released on January 26th. It should resolve this issue.
If you are not currently running this update, you can download it by going to Setting - About tablet - System upgrade. Your device will then check to see what updates are available. These updates for the Yoga Tablet 8 and 10 (B6000 and B8000) begin with "A442_001_028"
Please note that if you have several updates to install, the device may only allow you to install two per day and the installation process may take several days to complete.
Thank you,
Amy Tupper
Technical Resolution Lead, Pervasive Issues
Lenovo US
ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996

Lock screen display issues - Macbook Pro Yosemite

When waking my Macbook up after it has slept, the lock screen sometimes appears as below, with the left hand side appearing as fragmented lines and the right normally, save for the fact that the blurred image is not my current desktop background. At other times the lock screen will appear as normal, but with the incorrect blurred image. However, it will also appear totally normally with the correct blurred background too at times, with no discernible reason for any of the variations. I have tried changing the desktop background to see if that would help at all but it did not seem to make a difference. Any ideas??

The next time the problem happens, note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.

SOLVED: Can't blank/lock screen after 30 mins - xset s off not working

I want the monitor screen to blank after 30 minutes of idleness and password lock it. The password lock works fine, but the screen blanks after 10 minutes.
Here is what I have in my ~/.xinitrc
xset s off &
xset dpms 0 1800 3600 &
xautolock -time 30 -locker slock -notify 30 &
Is there something I overlooked?
Last edited by bpont (2011-12-17 18:02:47)

karol wrote:
Not sure what's wrong with your setup, works for me:
[karol@black ~]$ xset s default
[karol@black ~]$ xset -q | grep -A2 "Screen Saver"
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 600 cycle: 600
[karol@black ~]$ xset s off
[karol@black ~]$ xset -q | grep -A2 "Screen Saver"
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 0 cycle: 600
For some reason you're using the default timeout even though you have 'xset s off &' in your .xinitrc.
I don't know what exactly 'xautolock -time 30 -locker slock -notify 30 &' does, try commenting it out and see if it changes anything.
If you're still stuck, post the whole ~/.xinitrc.
I did your above test which gave me the same results as you. The thing is, whenever I reboot, that setting will be lost.
I think what I'll try next is moving the xset s off command from ~/.xinitrc into ~/.fluxbox/startup
I will leave xautolock -time 30 -locker slock -notify 30 & in ~/.xinitrc for now. By the way, what that line does is lock my display after 30 minutes using the 'slock' package and notifies me with a 30 second system alarm warning before it does so. That way I can press my keyboard or move my mouse to avoid locking my display.
Edit: Actually, what I ended up doing was simply changing the ordering of commands in my ~/.xinitrc from:
xset s off &
xset dpms 0 1800 3600 &
xautolock -time 30 -locker slock -notify 30 &
to
xset dpms 0 1800 3600 &
xset s off &
xautolock -time 30 -locker slock -notify 30 &
and that solved the problem by changing the timeout to 0...not really sure why the ordering of commands matters here, but it worked so I'm changing this thread to SOLVED.
Karol, thanks for your help in troubleshooting this with me.
Last edited by bpont (2011-12-17 18:02:08)

Screen display date format

ADDT does not change the display date format when I set it in th ADDT Control panel.
Control panel settings:
Database date format: yyyy-mm-dd
Screen date format: mm/dd/yyyy
Display output: yyyy-mm-dd
Is output does not change regardless of th esetting in control panel.
Please advise.
Simon

hello
ok here is another solution:
Go to the binding panel and select the Dynamic Text that retrieved from the recordset to display the date in your page.
- move your cruiser to the dead right end then you will found a bold down arrow beside the dynamic text click it you will found:
- dropdown menu >> click Developer toolbox >>> Date Formate
this will apply the settings you have made in the Control panel to this specified Dynamic data...
i did it and works very fine now...

Can't Change Lock Screen Background Image and User Account Picture in Windows 8.1.

I am running Windows8.1 Single Language with windows activated. Upgraded from Window 8 to Windows 8.1.
Lenovo Y410p.
4th generation Intel® Core™ i7-4700MQ (2.40GHz 1600MHz 6MB) with 16GB RAM.
NVIDIA® GeForce® GT750M 2GB .
I tried all methods that I found on web included :
1. http://www.askvg.com/fix-cant-change-lock-screen-background-and-user-account-picture-in-windows-8/
2. http://answers.microsoft.com/en-us/windows/forum/windows8_1-desktop/lockscreen-issues-on-windows-81/c51f570a-7a69-4e92-8348-3ebbed778592
3. I deleted the C:\ProgramData\Microsoft\Windows\SystemData file and folder
4. I restored the Libraries Features.
5. I run SFC / Scannow 3 times but get no error.
6. I created a new local account but the same problem shows up. (I'm using live for main account.)
Now, Please tell me what should I do, Thanks.

Hi,
First of all, please run the command slmgr.vbs /dlv
After that, check the License status if it is licensed.
Is there any error message when you couldn't change lock background or this option just grey out?
Roger Lu
TechNet Community Support

Mac Mini (2011) can't boot, no screen display.

Hi, my mac mini (2011) finally won't startup today.
It was since two weeks ago, the mini goes freeze very frequently, I discovered that the fan speed was always below 2000rpm, meantime, the CPU temp was around 80-90 degree, it is around 25 degree in the room, last Friday I installed a software named smcfancontrol, which can manually speed up the fan, and it seems better, and the computer runs faster, I think the CPU is running in full speed.
Today, I opened a video to watch, after about ten minutes, the computer goes freeze again, and of course I force powered it down by pressing the power button on the back, then the tragic came:
- when I try to boot up the machine, the front light turns on, then off with a "ka" sounds like the hard drive shutting down(force powering it down)
- after around two seconds, the light goes on again, and the fan smoothly goes to full speed, there is nothing shows up on screen, as well as no apple boot up sound.
- I tried to reset smc (power down, unplug power cable, wait 15 seconds, plug in power cable, wait 5 seconds, power on), no luck.
- I tried to reset pmu (at least internet says it's pmu, it seems apple website did not mention how to reset pmu on mac mini, power down, hold power button for five seconds, power on), no luck
- I also tried to unplug the memory, try with every single one to boot, no luck
- last Friday, when I can still boot up the computer, I thought there might too much dust, I removed the fan and cleaned it up, it looks a small piece of plastic on the fan plug were damaged, but the smcfancontrol app still can control its speed, therefore I think the fan is OK.
- during many retry, there was one time, the fan goes full speed at startup, with no front light off,(my current status is fan goes to full speed gently).
- the computer is connected with an AV amplifier, then output to a plasma TV, when the computer is powered off, the TV displays a background of amp, when I startup the computer, although no video output from computer, the TV goes to a "No Signal" status, I dont's think this is related to my problem.
the computer is out of warrentee, but bought only for less than two years... I really want it back to work, can someone help me? many thanks!
wish you all have a good day.

Hard to troubleshoot when you can't turn on the computer on any more. One option is to bring it to an Apple store to have them look at it. They will tell you what is wrong and how much it will cost to fix. I have never heard of them charging for a diagnostic and an estimate.
If your CPU was running hot all the time and your fan had small plastic pieaces, in my opinion, something got fried. The mini is so compact, that the excessive heat may have also over heated your hard drive causing thd "ka" sound.
If you decide to continue in to use a Mac Mini as a media server, may I would suggest using iStat to monitor it. I use iStat on my 2011 Mac Mini Media Server to monitor CPU usage, all sensors, and internet incoming and outcoming.

Lock screen display not working properly on wakeup from screen sleep

I just purchased a macbook air top model mid 2012... yesterday. It's brand new. When I click the trackpad to wake up the screen after it sleeps and has auto-locked (not a computer sleep! just a screen sleep), the screen is not all present. I have to move my mouse around to reveal the rest of the screen. Once I have done that enough to find my icon to enable text entry, I put in my password and I get back to the desktop which is then normal. This behaviour is only occuring on a wake-up after screen sleep. Seems like a video driver problem to me. The only add-ons I have at the moment are alfred and bettersnaptool. Has anyone run into this? Is there a fix? Also, I have applied all the latest updates. I can't remember, but this might have begun after the latest update.
Thanks,
John

I believe this article describes the issue:
http://support.apple.com/kb/TS4135

DYnamic Screen -Display data Based On the First Field

hello Helping Minds..
I have Two Fields In MODULEPOOL SCREEN.
1--- BUKRS
2--- BELNR     ..... Both From BKPF table.
My requirement is When i select a CompanyCode ( BUKRS ) In d first field,all the DocumentNO ( BELNR ) related to that CompCOde Shd be displayed in the 2nd field,
For Ex- If i choose BUKRS = 1000,
            and Then clicked the Belnr field, All d DocumentNO for BUKRS 1000 will be populated in d Dropdown list..
        BUKRS = 1000,
then BELNR = 0100000000 ,
                       0100000001   in d dopdown.
<<don't cross post/Duplicate else thread will be locked or deleted>>
Thnks in advance To D helping Minds
Edited by: Vijay Babu Dudla on Apr 25, 2009 4:57 AM

Process on value-request.
filed Bukrs module f4_bukrs.
field belnr module f4_belnr.
*module f4bukrs input.*_
if belnr is not initial.
select belnr bukrs from bkpf whre belnr = belnr.
else.
select belnr bukrs from bkpf whre belnr = belnr.
endif.               ""   Hey both these Condition lead to same thing...den Whts d use??
Firstly Belnr will be always Intial. cos it will be populated after we select the BUKRS. , Here am confused?
if t_bkpf is not initial.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'        " No idea Abt dis FUncn module, pls explain
endif.
end module.
module f4_belnr input.
if bukrs is not initial.
select belnr bukrs from bkpf where bukrs = bukrs.
else.
select belnr bukrs from bkpf whre belnr = belnr.
endif.
if t_bkpf is not initial.          ""   What is t_bkpf and y its used
call fm to CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
endif.
end module.

Can the iOS7 lock-screen timeout interval be changed?

I'm not talking about the Auto-lock setting; I mean the 5-second interval when my iPhone is locked and I press the wake button to view an incoming message or the clock. I would like to increase the time before the display shuts off again.

lllaass wrote:
Go to Settings>General>Autolock and increase the time until the screen locks.
There isn't much of a choice there... 1, 2, 3, 4, 5 minutes or never. I'm really hoping that the next update changes that to something more reasonable, such as 1, 5, 10, 15, 30 minutes or never.

Can Kin TwoM lock screen display date?

Similar Messages

Maybe you are looking for