Can labview direct handle USB interface in the PC ?

i want to receive the data on the usb bus. how to do that?

You can use VISA to exchange data over USB.
Look into the VISA Programmer Reference Manual about the syntax of a USB VISA resource.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Similar Messages

Does anyone know what ipad power adapter USB interface inside the barcode?

ipad power adapter USB interface inside the barcode is it?Bar code in each of the ipad the power adapter are the same?

Apple World Travel Adapter Kit
The World Travel Adapter Kit includes the Apple USB Power Adapter, USB Cable and six interchangeable AC adapter plugs for use with iPod, iPhone, and iPad. The adapter plugs can also be used with Apple MagSafe Power Adapters, Portable Power Adapters, and AirPort Express, so you can plug your power adapter into most electrical outlets around the world.
Copied from the Apple Store: http://store.apple.com/uk/product/MB974ZM/B?fnode=MTY1NDEwMQ&mco=MTA4NDE3MDQ

Can I use my MBox interface with the latest version of Logic Pro X?

Can I use my Mbox interface with the latest version of Logic ProX?

If your Mbox has a Core Audio driver compatible with your version of OSX, then most likely, yes.
J.

How can I see my USB device in the measurement&automation explorer?

I'm trying to use an USB-device with LabView7.0.
I followed the manual "using NI-VISA3.0 to control your USB device" which I found on the NI-webpage.
I generated an .inf file using the VISA driver developement wizard and installed it in the INV folder of my system (I'm using Win2000).
The following problems occured: after I connect my USB device the "add new hardware wizard" pops up and aks for a driver for the new hardware. when I direct it to the folder with the generated .inf file it doesn't accept this file as a driver.
second: the USB device doesn't appear in the measurement&automation explorer. I assume that as long as my device doen't appear there it is not recognized by NI-VISA and the comm
unication from LV wouldn't work?
How can a make my USB device visible in the meas.&aut. explorer?
Regards
Tobias

Tobias,
In the VISA Driver Development Wizard, you are required to specify the Vendor and Product ID. These numbers are what Windows will use to determine whether a specific driver is appropriate for a given device. If these numbers do not match between your device and the Windows driver (INF file) that you generate, you will see the behavior that you describe. Check to make sure that you are using the appropriate values. Also, did you right click on the INF file and install it as directed in step 2.2.2?
Page 5-87 of the VISA Programmer's reference manual specifies how to do a viOpen to a USB device in RAW mode, but you still need the same sorts of Product ID and Mfg ID that you needed for the INF file generation. Furthermore, if you are communicating with
your instrument directly, you will need to know exactly what command set it expects, so make sure you get that from the manufacturer as well. Finally, I want to mention that if this device complies with the USBTMC standard, then none of this is necessary--the steps above are for setting up a RAW USB connection. See this link for information.
Scott

Can a time machine usb drive backup the data from an external usb drive connected to and airport extreme*

can a time machine usb drive conected to my mac book backup the data from an external usb drive connected to and airport extreme ?

Hi Adam, if you think yoiur HD may be failing you could do a TM restore onto the new disk. I would rather see you do a clone either SuperDuper or CarbonCopy Cloner.Of your internal drive. That way you have a bootable backup in case it does fail.
btw - what are the symptoms of your failing drive?
-mj
Message was edited by: macjack

Can't see my usb hd in the airport utility

I just got an Airport express that is working great, but I can't hook a USB HD to it. I reformatted the drive and made sure that it is recognized when I plug it into my computer, but when I plug it into the USB port on the Airport and run the Airport Utility nothing shows up in the "Disks" menu. Anything I'm missing? I have cycled the power on the Airport without any success.

Is this a bus-powered drive or does it have its own power supply brick?
If bus-powered, a powered USB hub is needed.

Can I use a USB camera with the 3rd party USB camera software and share screens?

I want to do more than just use a USB camera w/iChat (or ichatusb). I also need to be able to initiate screen sharing between two computers. Specifically, I will use iChat with an insight built in camera on my end, and the other person will be using an iMac G5 PPC using a USB camera and the 3rd party USB software for USB ichat support.
My question then is am I able to request screen sharing (taking over their screen) from my ichat/fw combo to their ichatusb/usb combo?
thanks
dc

Hi,
The Cameras don't come into this at all. (But iChat and OS versions do)
Each end needs iChat 4 or higher.
Go to the Video menu and Enable Screen Sharing (Selecting toggles a tick On and Off (Tick Present is ON) )
Highlight Buddy in list and use the Screen Sharing icon at the bottom of the list (interlinked rectangles).
The G5 could be on Leopard (iChat 4) and be using a USB 1.1 camera that would need iUSBCam (formerly iChatUSBCam) as well as the Camera manufacturers Software.
iChat 3 (In Tiger OS 10.4.x) on the G5 with a USB 1.1 camera, Software and iUSBCam may well offer a Screen Sharing option (Or rather Desktop as Video Feed) in the iChat > Video Menu and that will not work
However if the G5 has USB 2.0 ports (not the Keyboard additional ports) then if it is up to OS 10.4.9 it can use a UVC Camera for Video Chats (UVC = USB Video Class No need for Additional Drivers) but Screen Sharing will still be an issue due to the iChat version.
IF the G5 is still on OS 10.4.x then you will have to use a third Party VNC app at both ends (And run a iChat Audio Chat along side)
9:33 PM Friday; September 2, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How can I control a hud interface via the keyboard?

I can nowwhere find a way to control a HUD (heads-up display) via the keyboard
any ideas?
I do not like this at all...
if I remember correctly old fashioned inspectors (like the one in the Finder by option selecting "Get Info") could be controlled via keyboard. Control F6
Those were called "Floating window" and for it a keyboard shortcut could be defined in the Keyboard Preferences...
I couldn't figure out yet how to "focus" a HUD. Well to correct: the HUD in Preview to change the color can be activated by Control F6, but the HUDs in Aperture I couldn't figure out yet
any ideas?
Michael

I figured it out. Just make a full-screen invisible button
and place it on a layer on each frame.
For insatnce, Actions - Button for frame 2:
on (keyPress "<PageDown>") {
gotoAndStop (3);
on (keyPress "<PageUp>") {
gotoAndStop (2);
sends the show forward to frame (slide) 3 with a press of the
remote's "Next" button and sends it back to frame (slide) 1 with a
press of the "Back" button.
I have a Stop action on each frame.
This allows me to control a Flash show just like a Powerpoint
show. Cool.

Can Labview PDA provide multi-interface?

Hi:
I want to use labview PDA module to develop software. But I found that labview can't provide multi-interface design.
I don't have the Labview Module and I just think about it. So if you have any idea to implement multi-interface design, please give me some suggestion.
By the way, labview doesn't provide the menu control to implement it. So how to design menu in the interface?
Thanks,

I am not sure what you mean my multi-interface, so I may not answer your question. The pda module has a special block that allows shields part of the VI from compiling in the PDA toolkit. It looks a lot like the case structure. The idea is that pocket pc and palm have different funtions, so it is silly to have two different VIs when all you need to change is a single subVI so that the VI can be compiled to run for one platform and it can be compiled again without changes to run on the other platform.
To access LabVIEW's menu options for a regular VI, goto edit >> run-time menu. There are several shipping examples too. Goto help >> find examples >> click on the search tab and look for menu .

My Cox Cable/Telephone splits to a telephone modem and a broadband modem. The BB connects via ethernet to a Cisco Linksys E2500 wi-fi (whatever). Can I plug my usb printer into the E2500, configure, and then print from my iPad?

I have just purchased an iPad 2. I have wi-fi for roku and have connected the iPad to it. I want to print to my usb printer. My connection is: Cox Cable spit to telephone and broadband. The broad band feed goes to a Cox modem and feeds the wi-fi. The Cisco Linksys E2500, wi-fi's the Roku and iPad. Can I USB from the wi-fi to the printer, configure (however), and then print from my iPad?
If not, how?
All comments will be appreciated.
Alan G. Watkins

the ipad cannot airprint to a non airprint printer.... i think that the only solution is to install helper software on a computer that has an attached printer and share it through the computer only...computer would have to be always left on
try this....http://www.collobos.com

No airport card easiest way to access wireless can you use a usb wireless on the mac

My mac pro is not equiped wirelessly, what is the easiest way to access internet wirelessly.
CanI purchase a usb wireless to work on the mac pro?

yes, you sure can.usb wifi adapters are availabe for your Mac Pro. try afterthemac.com. I don't work for them, just the first page that popped up. Dlink
makes something, but you may have heard a few stories about how DLink might be
'iffy' (someone else's words, not mine). Oh, and apparently, you can make an antenna signal booster out of an aluminum can.....
anyways, best of luck
John B

Can I use a USB that has the Lion Install on it?

I found through a Tech website, how to use Disk Utility to make restore the Mac Lion 10.7 Install unto a USB thumb drive to use as a Bootable install.
My question though is, can I still use the USB thumb drive as normal to transfer files?
Thanks

depending on the size of the drive, yes you can, but make a seperate folder (just not to mix things up).
hope that helps

Can I use a USB drive with the Airport extreme (not the new one) for Time Machine?

I thought I heard that using USB drive for Time Machine over wifi will work with the new, tall Airport Extreme, but not with the previous model, which I have. Anybody know for sure?
thanks.

It is not recommended.. Apple says it doesn't work.. for some people it does for others it is unreliable.. do you really want unreliable backups.
See http://pondini.org/TM/Airport.html

Can I move my USB external to the Time Capsule USB port and still see my backup?

After much difficulty getting Time Machine backups to work on my new 13" MBPro, after updating to 10.7.2, I've finally prevailed with help of the great Pondini. (You are a great humanitarian sir!)
Of course I'd now like to put that new 3 TB seagate goflex onto the Time Capsule, share it with the wired in iMac, and WiFi around the house with the MBPro.
But now I'm afraid to connect it to the Time Capsule's USB, lest my backup be spotlitin' everybody's permissions from years ago and telling my Lion not to start, or stop, or go.
Truth is- after 3 days of sorting it out (in the end not really knowing how I did), I'm telling people to wait for 10.7.x to update
(x = "when I tell you it's cool").
This is the first time in a while that I've been skittish about "recovering" from an update. 10.7.2 is a huge change that I wasn't ready for.
If I plug this drive into the TC and Time Machine goes crazy again I'll probably throw it out the window.
So has anyone made a TM backup with a big USB drive connnected to the MBPro port, and then moved said drive to the Time Capsule's USB port? And then still be able to access the backup through Time Machine?
Hmmmmm?

I wanted to plug the wifi on the time capsule and send the wifi signal only from the time capsule and have it fully operating.
Is it possible?
Not without ethernet connection to the 4G router.. you cannot use the 4G say into the USB of the TC.. there are no drivers for that. And you cannot do any other type of connection.. except ethernet.. so not with your current equipment..
Scrap the current 4g router and buy something with ethernet, that either takes the 4g modem or the sim having a built in modem.

Can Labview PDA handle XML?

I have spent about a week using the Labview PDA 8.0 development tools and now have acquisition vi's running and storing data, etc...
There is a push in my organization to use XML to tag data. I am still learning what this means, but I thought I would ask if there is any example code, app notes, etc... on XML, Labview, and Labview PDA.
Thanks for any pointer!
John

I haven't used it yet but saw that there is some example code in LabVIEW to read/write data from/to XML files.
Go to Help >> Find examples... to launch the NI example finder.vi and then go to the "search" tab, type xml, there are 3 example VIs.
Hope you'll find what you need there
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

Can labview direct handle USB interface in the PC ?

Similar Messages

Maybe you are looking for