Can Labview Programs run from the Windows System Tray?

Does anyone know if Labview Runtime executables can be run in the Windows System tray? Any help would be appreciated.
I'm creating a program that I want to run in the background, not visible on the desktop or taskbar.
Thanks,
Tom

Requirements Price: $29.95
Application Software:
LabVIEW 7.0+
Toolkits Software:
Additional Software:
Language's:
LabVIEW
INVtray LabVIEW Toolkit allows the programmer to create a LabVIEW program that can be hidden from the task bar and accessed through the System Tray. Comes with a sample VI that demonstrates all the features of the toolkit.

Similar Messages

Can LabVIEW download files from the Internet? I know the URLs of the files.

Can LabVIEW download files from the Internet? I know the URLs of the files.

Hi bmihura,
I'm not sure what you what to do - download or open URLs - but I've put together the attached VI.
I hope it is of some use.
Charlie Rodway
Test Design Engineer
Rolls-Royce Controls and Data Services Ltd
Attachments:
WebBrowser.vi ‏21 KB

How Can I Minimize a VI to an Icon on the Windows System Tray?

How Can I Minimize a VI to an Icon on the Windows System Tray?

There are some examples available online, using both ActiveX and .NET. Try searching for "tray icon".
It's been a while since I looked at it, but if memory serves, the structures needed to load an icon through the Win32 API are actually quite complicated and not as simple as that article makes them out to be.
Try to take over the world!

How can i get data from the other system?

hi,
i want get some data from the other r3 system in my r3 system? now this two r3 system are installed two server.

Hi,
U can achieve this by RFC function module...
create a function module and make it as REMOTE ENEBLED IN ATTRIBUTES TAB..
for example i have to r/3 systems as A and B.
I want to get data from B system..
so create the FM in B system and then in A SYSTEM u have to call that one ,like this....
DESTINATION NAME IS FOR SYSTEM B.
CALL FUNCTION 'ZRFC' DESTINATION <DESTINATION NAME>
EXPORTING
IMPORTING
TABLES..
Regards,
Nagaraj

6602-Can LabVIEW still run without the board having any input signals(in a simulation mode)??

wheeler

Wheeler,
The 6602 can physically run without any thing wired up, but it will not be "simulation" mode. Basically, you can use the internal timebase as a source or gate. For example if you are doing simple event counting, you can count the edges of the internal timebase. If you are doing pulse width measurement, or period measurement you can measure the internal 100kHz timebase. You will also be able to run the pulse train generation programs with the default setting of the internal timebase as the source.
The real answer to your question is that you do not need inputs wired up, but you do need to measure a signal (internal timebase) to get valid readings. So you can not do true simulation mode, but you can still program and test your program without your
intended input signals.

How to uninstall Windows Intune Center and its related programs permanently from the Windows 7 64 bit OS?

Hi,
I am Srikar,
I installed Windows Intune End Point protection in my PC (Windows 7 64bit).
I am not able to uninstall it.It is eating all the resources and my pc is getting slower down day by day.
I tried uninstalling via Control Panel->Programs and Feature->Windows Intune End point Protection.
Its uninstalled,and after some time,it is installed automatically in my PC.
Don't know whats happening.Please Please any one guide me.My PC is not even responding some times.
Regards,
Srikar Ananthula,
Srikar

Yes, removing a device will uninstall Windows Intune Center and its association with Windows Intune. Check this:
http://onlinehelp.microsoft.com/en-us/windowsintune.latest/hh949661.aspx [Removing a Device by Using the Windows Intune Company Portal], and
http://technet.microsoft.com/en-us/library/hh441723.aspx [Add Computers, Users, and Mobile Devices to Windows Intune].
Hope this helps..
Chaitanya( Twitter |
Blogs )
This posting is provided "AS IS" with no warranties, and confers no rights.

I'm trying to do a spanish lesson but my MacBook Air sound isn't working well. I can't hear anything from the sound system on this computer. Also When I try to Face Time, and someone 's connecting it quits.My battery charger isnt working it on zero all

Hello If Yal Reading This
My Macbook Air Ain't Working.
In Three Ways!!!!!!!!!!!!!!
1. My Sound
2. Face Time
3.Battery
Sound isnt working loudly when I do spanish lessons
My Face Time cancels when I connect to another person
And when I charge my MacBook Air it is always put on zero= 0%

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

How can I remove associations from the itunes library

I messed up...I had some of my music on my computer, and ALL of my music on my network attach storage which of course included all the music on my computer. I was trying to only add some additional stuff from the NAS to my iTunes library but somehow added ALL of it which in the end will be great but currently I have literally dozens of duplicate albums. I'd like to somehow remove an entire folder associated with my iTunes library but cannot figure out how to do that. If I could somehow remove or edit the associations to my local music and then associate only to the music folder on my NAS I believe the problem would be solved, is there anyway to do that?

You simply have to change the update option of your iPod to "manually manage music and videos". You can get details here: Managing content manually on iPod
One major word of caution. If you delete songs from your PC and have no back up other than the iPod you will risk losing them permanently if your iPod fails or you find you have to restore it to solve a problem. You should consider investing in an additional internal or external hard drive to store/back up your music. Alternatively at the very least back up songs you can't replace such as iTunes downloads to CD or DVD. Forum member Buegie has compiled a very extensive procedure for backing up your music which you'll find at this link: Backing up iTunes
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device. In that case use Safely Remove Hardware icon in the Windows system tray on your desktop or check this link: Safely Disconnect IPod

Can multiple LabVIEW programs simultaneously access the same NI-DAQmx hardware?

I am developing a test station system that, in essence, runs several
seperate LabVIEW programs simultaneously on the same computer, each
controlling a different set of I/O channels on one shared set of NI
DAQ hardware (analog and digital I/O PCI boards with external signal
conditioning).
I have already gotten a system like this running almost flawlessly
using LabVIEW 6.1, NI-DAQmx 7.1 with traditional channels, and older
E-series DAQ hardware. So long as two programs do not try to write to
the same output channel simultaneously, everything works exactly as
expected--I can even read from the same (named) channel simultaneously
from more than one program. The only issue I have had is that if
one
of the compiled applications is closed (not just stopped, but closed)
while others are still running, Windows XP (SP1) will bluescreen on a
driver error. This is undesireable, but acceptable (though if there's
a fix/workaround, I'd love to hear it).
I am now building a similar system using mostly the same software
(with an upgrade to LabVIEW 7.1), and I've noticed that the new
M-series DAQ hardware seems to offer much more bang for the buck than
old E-series hardware and its kin.
My question is this: It appears that I/O on M-series hardware must be
performed with new mx channels, with traditional channels not being an
option. I am therefore wondering if I will be able to do this kind of
multiple simultaneous access with mx channels, or if I must purchase
the classic hardware and use traditional channels for this somewhat
unorthodox application.
(Incidentally, the multiple simultaneous program thing is a
requirement for this system, as it is the only clean way to run
multiple
identical copies of the same complete program that only
operate on different I/O channels, and re-doing the program from
scratch is not an option.)

Dear Anonymous,
Thank you for contacting National Instruments.
To address your question, I don't know if multiple simultaneous access with mx channels is possible, but I do not see why it wouldn't be. The best way to find out would be to test it. I don't have your program or hardware, so I'm pointing you to some Compatibility VIs. These are VIs that look exactly like Traditional DAQ VIs except that underneath they call the DAQmx driver instead of the Traditional DAQ driver. If your device works when you substitute these Compatibility VIs in for the Traditional DAQ VIs, then you'll know the M Series boards will work for you.
Here is the link for information about the Compatibility VIs:
http://digital.ni.com/softlib.nsf/954feaeea92d90918625674b00658b
83/9d67f671bcc6850586256e630059308b?OpenDocument
Let me know if you have any further questions or if this does not resolve your issue.
Thanks again and have a great day!
Chad AE
Applications Engineer - National Instruments

HT6114 My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

Restore from the backup you had prior to installing Mavericks.
However, the upgrade should not have altered your partition scheme. Did your erase and format the drive prior to upgrading?

How can i change the class in the Class Library project to be static or public so i can use it from the windows application project ?

First i know that when i make any changes to the class library project i need to rebuild the project then to remove the Capture.dll from the TestScreenshot project and then to add again the updated Capture.dll
The problem for example in this case i'm trying to use a public static variable i add in the DXHookD3D9.
In the DXHookD3D9 i added this public static variable:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
//using SlimDX.Direct3D9;
using EasyHook;
using System.Runtime.InteropServices;
using System.IO;
using System.Threading;
using System.Drawing;
using Capture.Interface;
using SharpDX.Direct3D9;
namespace Capture.Hook
internal class DXHookD3D9: BaseDXHook
public DXHookD3D9(CaptureInterface ssInterface)
: base(ssInterface)
LocalHook Direct3DDevice_EndSceneHook = null;
LocalHook Direct3DDevice_ResetHook = null;
LocalHook Direct3DDevice_PresentHook = null;
LocalHook Direct3DDeviceEx_PresentExHook = null;
object _lockRenderTarget = new object();
Surface _renderTarget;
public static decimal framesperhourtodisplay = 0;
protected override string HookName
get
return "DXHookD3D9";
List<IntPtr> id3dDeviceFunctionAddresses = new List<IntPtr>(
framesperhourtodisplay
The problem is i can't even get to the Capture.Hook namespace and not to the DXHookD3D9 from the TestScreenshot application window project.
This is a screenshot:
For example fro the FramesPerSecond class i can use it get to it from the windows forms application.
namespace Capture.Hook
/// <summary>
/// Used to determine the FPS
/// </summary>
public class FramesPerSecond
int _frames = 0;
int _lastTickCount = 0;
float _lastFrameRate = 0;
Since it's public i guess.
But if i will change the DXHookD3D9 class from internal to public:
public class DXHookD3D9: BaseDXHook
I will get error on the DXHookD3D9:
Error 1
Inconsistent accessibility: base class 'Capture.Hook.BaseDXHook' is less accessible than class 'Capture.Hook.DXHookD3D9'
And the BaseDXHook class:
namespace Capture.Hook
internal abstract class BaseDXHook: IDXHook
protected readonly ClientCaptureInterfaceEventProxy InterfaceEventProxy = new ClientCaptureInterfaceEventProxy();
public BaseDXHook(CaptureInterface ssInterface)
this.Interface = ssInterface;
this.Timer = new Stopwatch();
this.Timer.Start();
this.FPS = new FramesPerSecond();
Interface.ScreenshotRequested += InterfaceEventProxy.ScreenshotRequestedProxyHandler;
Interface.DisplayText += InterfaceEventProxy.DisplayTextProxyHandler;
InterfaceEventProxy.ScreenshotRequested += new ScreenshotRequestedEvent(InterfaceEventProxy_ScreenshotRequested);
InterfaceEventProxy.DisplayText += new DisplayTextEvent(InterfaceEventProxy_DisplayText);
~BaseDXHook()
Dispose(false);
How can i solve it so i can use the variable framesperhourtodisplay in the DXHookD3D9 class with the TestScreenshot windows forms application ?

Hi,
I dont know if it will work here, since I dont know the complete structure, but the base call must be public, if the derived class is public, so the base class is at least as accessible as the derived class.
Try make the base class public. (And maybe the base-class IDXHook of the base also...)
Or use a different approach and make only the properties public that are needed to be public by adding an extra class...
A structure could look like:(you need to create a class thats public in your dll and expose a property, and set this property in the internal class...)
In the Accessing class (here Form1)
public partial class Form1 : Form
public Form1()
InitializeComponent();
private void Form1_Load(object sender, EventArgs e)
C c = new C();
MessageBox.Show(B.F.ToString());
and in the class Lib:
internal class A
public A()
B.F = DateTime.Now.Millisecond;
public class B
public static int F { get; set; }
public class C
public C()
A a = new A();
(add a referenc to the class lib from the accessing project)
Regards,
Thorsten

I can't boot from the windows cd with boot camp

I got Vista up and running via boot camp but now I have a problem that could cause some issues. How the **** do you boot from a windows cd with boot camp!?!? When I stick in the windows based CD (could be the vista install CD -after vista's been installed of course- or a Windows home server restore cd) and hold down the option key I chose to boot from the CD in the menu then the screen goes black as it should and then it says press any key to boot from cd or dvd..... It gives me 5 seconds to press a key and then it conintues to boot into Vista. The thing is when it asks me to press any key I press any and all keys on the keyboard and I get no response and it just boots into vista. This can be quite a problem, what if I need to restore vista via the install CD? I can't chose to boot from it cause everytime it asks me to none of my key presses register. So everytime I have a problem I won't be able to restore or even diagnose it, I'll just have to reinstall vista? I don't think I can even bring up the safe mode or anything like this. The keyboard won't work until I reach the password screen of Vista. I've also tried plugging in a USB keyboard to it and it still doesn't work. So basically I need to know how to make the keyboard work before Vista loads.

Ok, well I just tried booting from the windows cd and it seems that I lied to ya It seems that you can boot from it. Although I only took it to the point I was comfortable with. The boot resulted in it asking me to install windows and I didn't see any partitions listed or anything, so I chickened out (so to speak) not wanting to take the chance of my Leopard installation getting screwed up.
It's been a quite some time since I used the Vista boot disc and can't really remember how it went when I used it in conjunction with boot camp beta. Sorry can't give you anymore information.

My libraries panel is missing from the window dropdown. Where else can I access it? Is that normal?

My libraries panel is missing from the window dropdown. Where else can I access it? Is that normal?

Lisa,
You may try the list (or go straight to 6) if you have updated to Yosemite without reinstalling).
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

How can I hide the main front panel when I run from the executable?

Hopefully this is an easy question. I have an application where the front panel is not the main GUI and I would like to hide it when the program runs, but only when it runs from the executable. How can I do this?

NIquist wrote:
Yeah, don't do that. Executables built in LV require at least one front panel to be open. If it isn't, the run-time engine automatically closes the executable. I haven't checked recently, but I assume this is still the case.
Instead, you can set the FP state to minimized (as suggested earlier) or (better) to hidden.
P.S. one side point - the property and invoke nodes have a shortcut - if you use the Application or VI classes and don't connect a reference, they default to the current app or VI. That means you don't have to open the reference.
Try to take over the world!

I have a MacBook running OS X v10.6.8 and I'm trying to upgrade to Mouton Lion but I can"t download it from the app store. It says I need a intel core duo which i have. does anyone know whats happening here?

I have a MacBook running OS X v10.6.8 and I'm trying to upgrade to Mouton Lion but I can"t download it from the app store. It says I need a intel core duo which i have. does anyone know whats happening here?

Check that your computer is compatible with Mountain Lion.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If your computer isn't compatible, you might be able to upgrade to Lion.
Computer Compatibility - Lion
Check to make sure your applications are compatible. PowerPC applications are no longer supported.
Application Compatibility
You can also check which applications are PowerPC by going to the  menu, select About this Mac, click on More info…, then click System Report and select Software/Applications.

Can Labview Programs run from the Windows System Tray?

Similar Messages

Maybe you are looking for