Can LCM import form security?

We are on Hyperion Planning 11.1.2 and used LCM to migrate and app from UAT to Prod. We migrated all artifacts over, but the form security is not there. We see the groups when we try to add access, but the access is not on the form folders themselves as they are in UAT. Is LCM able to import the security for forms like the dimension security? Thanks in advance.

Yes. LCM can import form and form folder security. I tend to export to the file system first. That way, I can see exactly what's in the XML files, plus I have an arcihve of what got migrated.
If you export to the file system first, you should see form and form folder security in the following directory:
resource\Security\Access Permissions
In that folder there will be a Users.xml file, and also a directory for Groups. If you look in the XML, you should see security assigned for forms and folders.
Hope this helps,
- Jake

Similar Messages

  • Can you import form responses from one responses file to another? I know you can export...

    I have a distributed form with a responses file that has six responses in it. Somehow the distribution got cut off and I had to set up a new distributed form and a new responses file. I was able to export the six old responses to a .csv file, but have not found a way to IMPORT the .csv file into the new responses file.
    "Add" does not work-- it is looking for PDF files only. Does anyone know a way to import those 6 responses into my new responses file? The distributed form did not change in any way, so all of the fields are still exactly the same.
    I can create a master portfolio and just add the two portfolios together, but they just remain as file icons within the portfolio and I need the data to be inline together in one file.
    Thank you very much.

    If you still have the .muse file for the template you want you can open it up in Muse 'Select All' --> Copy.
    Open your destination blank template and paste it. You can have bothe muse files up in Muse at the same time.

  • Essbase filter assignment while importing the security through LCM

    Hi Experts,
    My source server is Essbase standalone 11.1.2.1 and my destination is Essbase 11.1.2.4, obviously shared services security.
    I just created some test users/ groups/ filters in 11.1.2.4 and did export through LCM and got the actual format of users/ groups/ roles CSV files. Then I just did edit all these CSV files with my source 11.1.2.1 users/ groups details with the respective roles and tried importing it in the same 11.1.2.4 server.
    I was successfully able to create all the users groups and its roles assignment. But I got stuck up with the filter assignment for the groups... I mean my groups are assigned with the role 'Filter' at the 11.1.2.4 environment but I dont know how to get the actual filter assigned to these groups.
    I know in Applications group we can assign filters manually using Assign access control but how to do it with the LCM import itself? is there any options/ tricks available or do we need to do it only by manually?
    Thanks,
    Siva

    Not tried the maxl create group but it is deprecated in 11.1.2.4
    Anyway there is nothing wrong with groups in EAS 11.1.2.4
    Cheers
    John

  • Save a pdf with security so vendors can only import & print but not extract?

    We submit ads to newspapers all the time in pdf format...the newspaper imports the pdfs into their page layout program (Quark) for printing...currently we do not put any security on the pdfs because the vendors can not import the pdf into their page layout program Quark with security on.
    Is there a way we can set security so the only thing the newspaper can do is import the pdf into Quark (or a page layout program) and print?
    We would like to restrict the use of exporting artwork and copy from the pdf as well as saving the pdf as different formats.

    We just launched a new DATING SITE! Meet singles from all over the world! FREE registration for the first 500 users! Register now and find thousands of great singles in your area! Visit www.NYDateNet.com

  • I have a acrobat reader, can I import text delimited data format to a PDF Form so that it can auto fill into forms that was created? If not, what about FDF and XML data

    I have a acrobat reader, can I import text delimited data format to a PDF Form so that it can auto fill into forms that was created? If not, what about FDF and XML data

    Yes, you can do all of that via Tools - Forms - More Form Options - Import Data, if you have Acrobat.
    If you only have the free Reader then you can still do it, but it requires a script.

  • Can I embed html using an imported form?

    I have been trying to find a simple answer to this..
    And the answer seems to be No!
    NO? really?
    So importing forms to fiormcentral is only to keep track of email responses?
    Doesn't acrobat do this already?
    I'm sorry I don't understand why I can import to get results, but I can't import to get a webform built?
    Maybe my form is too complicated or duplicates???
    If  the form is built/formatted correctly can I import it and embed it then?
    Or is it just not possible in any way shape or form? (pun intended )
    Thanks

    Also what is with the SCAM with the pricing?
    0.99 cent /month trial forms plus basic - becomes $14.99/month after (5 forms)
    $11.99/month formscentral plus - allows unlimited forms / $11.99/month (NO IT'S NOT, IT'S $143/year - ABSOLUTELY NOT MONTHLY SO WHY LIE ABOUT THIS OPTION???)
    $14.99/month acrobat pro - includes formscentral (NO IT DOESN'T , it includes a local version of formscentral that allows you to create forms ready for formscentral)
    IN DOCUMENTATION:
    it clearly says
    FORMSCENTRAL PLUS IS AVAILABLE WITH ACROBAT PRO SUBSCRIPTION IN SELECT COUNTRIES.
    But doesn't list the countries and it sure as hell isn't part of ACROBAT PRO subscription anywhere I can see.
    This is very upsetting all of this.
    It makes me NOT want to use Adobe FORMS anything.

  • Can I import video directly form my UVC camera?

    Can I import video directly form my UVC camera?

    That depends on what you mean by import.
    You can't capture it live in Premiere Pro.
    You can, if you save it to a supported format, import it into Premiere Pro and edit it. So it depends on the softqare you use to capture it.

  • How can I import auto correct form old version

    How can I import all my auto correct list from Pages into the new version 5, they have all been deleted

    The Auto Correct function is now the System Auto Correct in System preferences.
    You will need to re-create your list unfortunately.
    Give Apple feedback on the issue, either in the Pages Feedback or the App Store.
    Peter

  • I can not fill out security questions-the form is shown up not completly

    I can´t answer the security questions, because only the half site comes up. First line I see is "security question" last line is "alternate e-mail". On top I miss e-mail and Password, at the end I miss the age compared with support info.
    OSX 10.6.8/ iTunes 10.7. with Mini, Macbook Pro, iMac.
    Thank you for any idea how to overcome this.
    Arri

    The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) on your account. If you aren't getting the reset link then you don't have a rescue email address, and you won't be able to add one until you can answer your questions - you will need to contact iTunes Support / Apple in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

  • PDF Form Security

    We have created a pdf form which our web server uses to collect ticket information from our ticketing software and populate the corresponding fields on the pdf form.  The form is then attached to an email and sent to the ticket purchaser so they can print their eticket at home, and it includes a barcode which then gets scanned at the entrance of the performance venue. (i.e. Eticket or Print At Home)
    However, we have just discovered that the ticket element fields can be edited by the end user when they receive it.  They cannot save the file, but they can print the form with the changes they make. We are concerned that users may try to change their seats or performance time.  I have tried to lock the form with a password, but then that prevents the webserver from importing the data into the pdf form from the ticketing software.
    Any ideas how to allow the server to fill in the fields with information, but then lock the pdf form for editing when it is sent to the end user/purchaser?

    There really isn't any actual secure way of doing this with Acrobat.
    You really can't even keep them from saving the PDF. In fact, by nature, it is already saved to their hard drive elsewise they wouldn't be able to view it.
    I would suggest looking in to a Digital Rights Management solution. That is as close to secure as you are going to get but it's very expensive.

  • Exporting Planning forms security using exportsecurity.cmd

    Is there a way to export only the planning forms security info using exportsecurity.cmd ? I am using Planning 9.3.1.2.
    I can export dimension level security, group level and user level. I am not able to figure out a way to export only the form security.
    Any suggestions?

    If I remember correctly you can import security on forms but it doesn't seem to export it (my mind may be playing tricks and I could be wrong), from 11 I know you can definitely import and export permissions on forms.
    If it is not possible you can always run a query against the planning application relational repository for example
    select formname.object_name as "Formname", username.object_name as "Username/Group",
    case acc.access_mode
    when 1 then 'Read'
    when 3 then 'Write'
    when -1 then 'None'
    end as "Access"
    from
    hsp_access_control acc, hsp_form form, hsp_object formname, hsp_object username
    where acc.object_id = form.form_id
    and formname.object_id = form.form_id
    and acc.user_id = username.object_id
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How can I use the security package in JCOP41V2.2?

    Hi all, I'm a newbie in javacard programming. I'm trying to develop a project with RSA_signature. But I found, the exception NO_SUCH_ALGORITHM will be thrown out when I new an instance of KeyPair.
    My java file Temp_1.java following:
    package temp;
    import javacard.framework.Applet;
    import javacard.framework.ISO7816;
    import javacard.framework.ISOException;
    import javacard.framework.APDU;
    import javacard.security.*;
    * @author lujj
    public class Temp_1 extends Applet {
    KeyPair myKeyPair = null;
         public static void install(byte[] bArray, short bOffset, byte bLength) {
              // GP-compliant JavaCard applet registration
              new Temp_1().register(bArray, (short) (bOffset + 1), bArray[bOffset]);
         public void process(APDU apdu) throws ISOException{
              // Good practice: Return 9000 on SELECT
              if (selectingApplet()) {
                   return;
              byte[] buf = apdu.getBuffer();
              if(buf[ISO7816.OFFSET_CLA] == (byte)0xEE)
                   try
                        myKeyPair = new KeyPair(KeyPair.ALG_RSA, KeyBuilder.LENGTH_RSA_1024);
                   catch(CryptoException e)
                        ISOException.throwIt((short)(0x6F00+e.getReason()));                    
                   return;
              switch (buf[ISO7816.OFFSET_INS]) {
              case (byte) 0x00:
                   break;
              default:
                   // good practice: If you don't know the INStruction, say so:
                   ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED);
    This package can be upload and the applet can be installed successfully.
    But if I send the apdu "EE 00 00 00 00" after selected the applet, "6F 03" will be returned.
    Is there anyone can help me? Thanks a lot.

    Thank you so much~
    Actually, it's only an applet for test. I cannot get the error code if I new the KeyPair in install function or Applet construct function. It will return "6A 80" when install the applet.
    And, I found that it support few algorithm. For example, it does not support ALG_DES_MAC4_ISO9797_M2,etc. Is there anything I can do if I want to use the algorithm? Shall I rewrite security package by myself?
    5555, security package is the standard package in JAVACARD API 2.1.1.

  • Can't import P2 Footage after 5.1.2 update

    This one has me stumped. After updating to 5.1.2 I can not import P2 footage.
    When I click on the import Panasonic P2 tab under the import menu, nothing happens. Then, I click on it one more time and the import window loads but there is nothing there (I see the dividing lines but there is no text or buttons to click...just a solid grey background).
    Tried the usual...trashed prefs, rebuilt permissions, downloaded the full FCP update off of the apple website and re-installed.
    Also pulled all my plug-ins out just in case it was somehow related to that issue.
    Still nothing.
    Also, searched this form, creative cow and HVXUSER...no one else seems to have this issue.
    Any thing I am missing?
    - Chad
    Dual 2 Gig G5   Mac OS X (10.4.8)  

    Same problem here on two different G5 machines after installing 5.1.2. Love the new import tool - but 10-20% of our clips just won't import anymore. Done all the recommended clean-ups and like many others on this forum and CreativeCow...it just won't work on some 24PN clips.
    Getting desperate as we have daily shows that go out and need to get the rest of those clips in so I'm looking for any workarounds at this point and hoping Apple has a fix soon. This is clearly related to 5.1.2 as the same clips were previously imported in 5.1.1 and are readable in the P2 viewer and even playable in the 5.1.2 P2 import window.

  • How can I import passwords and usernames from Google Chrome into FireFox using Mac OSX?

    All of my passwords are in the Google Chrome browser, but I want to use Firefox as adblock plus is better for firefox. How can I import my firefox passwords & usernames in OSX easily?

    You can't currently.<br />
    Importing passwords from Google Chrome is not implemented.
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=589589 Bug 589589] – Chrome profile migration for Import Wizard and Migration Assistant - passwords, form data, and settings
    ''(please do not comment in bug reports)''

  • How can i change the security question on my itunes account??

    How can i change my security question but i dont remember my old questions????

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (101987)

Maybe you are looking for