Can legato be compatible for taking backups with RMAN

can legato software be compatible for taking backups with RMAN
oracle 10g
Message was edited by:
user531314

Rman is so feature rich and yiou can integrate your third party backup software with rman to take backups, there is nothing to worry in your case, this is very much in the reach.
hare krishna
Alok

Similar Messages

For Taking Backup with BRTOOLS

Hello,
I want to take backup with BRTOOLS utility.
Please tell me that exact scenario of taking backup with BRTOOLS.
Thanks
Mohit

Mohit,
Check below link.
http://help.sap.com/erp2005_ehp_04/helpdata/DE/8d/991ce04c81054a96b30469835cb11d/frameset.htm
Hope it helps
Thanks
Sushil

Privileges required for database backup with RMAN

Hello,
We have 10g R2 on Solaris box. We use RMAN for backup and use the SYS account on the database to connect and take the backup.
Are there specific privileges that are required to take the database backup , so that I do not use the SYS account or the syspassword in the RMAN script.
I want to create an account and give only the privileges required to take the database backup and recover .
Thanks

I think RMAN needs the SYSDBA privilege, so you won't gain much by switching from SYS to another user.
You don't need to store sys/password in a script. You can just :-
rman target / catalog xxx/yyy@catalog

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?
Several times in the last year, I've gotten a message that Time Machine needs to completely redo my backup. Using the wireless connection, this takes almost two days. Is there a way to do the backup with ethernet and then switch back to wireless? Thanks.

May I know what is needed to make sure the MacBook is able to see Time Capsule on ethernet?
Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire gateway to the WAN port (circle of dots icon) on the Time Capsule.
If AirPort Utility cannot "see" the Time Capsule now, you will need to perform a "hard reset" by holding in the reset button for 7-8 seconds or so and then reconfigure the Time Capsule. You can use the same Time Capsule name and password, etc. as before.
Configure the Time Capsule to "Create a wireless network" and select the Bridge Mode option when it appears during the setup using AirPort Utility.
Once the Time Capsule is configured, restart the entire network again. Power down everything, start the 2Wire first and then start each other device after that one at a time about a minute apart.
Now you can connect your Mac directly to one of the LAN <-> ports on the Time Capsule for the backup using another Ethernet cable. In general, about 20-25 GB per hour will transfer.
The Time Capsule will broadcast a much faster wireless network than the 2Wire can provide, so you might want to leave the setup "as is" for awhile after the first backup is complete. If you decide to use the Time Capsule as your main wireless access point, you would want to turn the wireless off on the 2Wire since two wireless networks in close proximity can create interference problems.
Or, if you want to use the wireless on the 2Wire, you could turn off the wireless on the Time Capsule. Then backups will occur over the 2Wire wireless, or over Ethernet.
I don't really recommend the "Join a wireless network" setting on the Time Capsule for most users, but you could go back to that setup as well if you want after the first backup is complete.

What commands used for taking backup of oracle database using BR*Tools

Can somebody please help me urgently to know what are the commands used for taking backup of oracle database using BR TOOLS.Also specifythe commands in detail which can be used for taking backups of oracle database ,Online Redo log files in databse using BRBACK tool,Archiving of offline, redo log files using BRARCHIVE, and Restoring a Database using BRRESTORE tool Commands(Plese specify the commands with their Syntax used).Also specify the commands with their Syntax which are used for taking backup of oracle database(online,Offline redo log files) into Tapedrives using BRTOOLS commands.
Thanking You for helping (in advance).

Dear Ashish,
BRBACKUP / BRARCHIVE calls the operating system command to copy the files.
Simple approach to get the commands is as follows.
1. Set the BR_TRACE (as given in the SAP note 29321) and run the command for which you need to know the OS / SQL commands.
2. This will generate the log file with the trace information. This trace has the information of the commands used by the job you have run.
Hope this helps.
Regards,
Madhukar

To build web based application for taking backup

Actually , I have prepared menu based scripts for taking backup.
Now what i want to make is WEB BASED APPLICAATION for taking backup. My idea is to build the Web Pages which will call the scripts which i have already buit . But I don't know how through Web Pages I am able to go in the server and call the scripts .
If anybody having any idea regarding this . Pls guide me I am very thankful to him/her.
Thanx
Waiting for valuable advice

Dear Sandeep Saini,
You may develop the web application is used SDK DI Server.
Please refer to SDK help and sample for more information about DI Server.
Best Regards
Jane Jing
SAP Business One Forum team

HT2534 I have money on my iTunes account. Can I purchase apps for my iPad with this credit?

I have a credit on my iTunes account. Can I purchase apps for my iPad with this credit and how do I do it?

Yes. You can use any funds that you have available in iTunes for the App Store, iTunes, iBooks or the Mac App Store. Just go to the app store and tap on the app that you want to download. If the credit is available, it will be deducted from your account when you make the purchase.
You can swipe to the bottom of the featured tab in the app store to view your account balance.

How can i set password for a backup?

::I am using 10g xe
I am gettin gbackup through RMAN, how can i set password for each backup? I want to protect my backup so that no one other could use it if he copies the backup files.
Faheem

Just use "SET ENCRYPTION ON IDENTIFIED BY password ONLY" command in your RMAN scripts. Look at the advanced backup manual for details: http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmbackp006.htm#sthref632
Daniel

Syntax for taking export with 'Query' parameter

Hi all
Please help me regarding syntax for taking export with query parameter

Hi
exp file=d:\exp.dmp log=d:\exp.log tables=scott.emp query='where empno=10'
exp file=d:\exp.dmp log=d:\exp.log tables=scott.emp query='where ename='''SCOTT''Salman

Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn't complete the backup to "G-RAID". to complete backup. An error occurred while creating the backup folder.

Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn’t complete the backup to “G-RAID”. to complete backup. An error occurred while creating the backup folder."
Any idea what I should do?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Can anyone recommend software for opening PPS with Lion

can anyone recommend software for opening PPS with Lion I have seen pear notes but woud like some feedback before getting it

No. Everything I have seen is that PearPC is a project underdevelopment.
What do you need to run that is PPS?
Allan

How can I install attachments for SAP notes with zip-files ???

How can I install attachments for SAP notes with zip-files ???

Can you elaborate on your question? How exactly is your question related to SAP NetWeaver Portal: Application Integration? If you are really asking how to install attachments contained in SAP notes, there is no automatic/general way and you should ask your question in the Software Support and Maintenance space to begin with. What SAP note(s) are you looking at installing?

How can i sign up for hbo now with out ipad

how can i sign up for hbo now with out ipad

You need an Apple TV or iOS device. See this link. http://www.apple.com/appletv/hbo-now/

Restore incremental backup with rman

Dear Friends
can u tell me how to restore an incremental backup with rman? i backup my rman with statement below :
1. backup full database format '/oracle/PRD/sapbackup/%U';
the results was :
-rw-r----- 1 oraprd dba 19006996480 Jun 10 12:08 0ojiit4n_1_1
-rw-r----- 1 oraprd dba 12746752 Jun 10 12:08 0pjiiu6b_1_1
2. after that i do incremental backup :
backup incremental level 1 cumulative database format '/oracle/PRD/sapbackup/%U';
the results was :
-rw-r----- 1 oraprd dba 173400064 Jun 10 13:44 0ujij2k0_1_1
-rw-r----- 1 oraprd dba 12746752 Jun 10 13:44 0vjij3qc_1_1
what statement i need to run for restore the incremental backup?

run{
ALLOCATE CHANNEL c1 DEVICE TYPE DISK;
RESTORE DATABASE;
RECOVER DATABASE;
The above command will restore your database from the last good RMAN backup. Your last backup is incremental level backup as you posted. The above command will fullfill your requirements

Hot Backup with RMAN question.

Hi all.
We want to make a full backup with RMAN every night with the db up. Version 9i in archive log mode.
My question is if with the command:
backup database plus archivelog delete input format 'MY_FORMAT_STRING';
will store all the files needed for the recovery in one file or I need to backup some other file or do more actions. The backup will be consistent?
Regards.

By using this command you are only taking the backup
all the database files plus all the archived logs
needed for point on recovery.
But still you will have to take the backup of Control
file and parameter files. Which you do by configuringi think its not
RMAN> configure controlfile autobackup off
2> ;
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
new RMAN configuration parameters are successfully stored
RMAN> backup database
2> ;
Starting backup at 28-NOV-07
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL\ORCL\SYSTEM01.DBF
input datafile fno=00003 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL\ORCL\SYSAUX01.DBF
input datafile fno=00002 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL\ORCL\UNDOTBS01.DB
F
input datafile fno=00004 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL\ORCL\USERS01.DBF
input datafile fno=00005 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL\ORCL\DATA.DBF
channel ORA_DISK_1: starting piece 1 at 28-NOV-07
channel ORA_DISK_1: finished piece 1 at 28-NOV-07
piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\ORCL\ORCL\BACKUPSET\2007_11_28\O1_MF_
NNNDF_TAG20071128T151313_3NTHSTK9_.BKP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current controlfile in backupset
including current SPFILE in backupset
channel ORA_DISK_1: starting piece 1 at 28-NOV-07
channel ORA_DISK_1: finished piece 1 at 28-NOV-07
piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\ORCL\ORCL\BACKUPSET\2007_11_28\O1_MF_
NCSNF_TAG20071128T151313_3NTHV8S5_.BKP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:03
Finished backup at 28-NOV-07
RMAN>backup database backup controlfile as well spfile but its better backup control file separately after backing up the database plus archivelog cause a backup set info within control file which will not be in control file which is just backed up by backup database .
Khurram
null

Can legato be compatible for taking backups with RMAN

Similar Messages

Maybe you are looking for