Can line in, in the audigy 2 nx provide a 7.1 sou

Hi, I connected my mixer to the line in in the audigy 2 nx. I only received 2 speakers working and the sub, while i have a 7. system.(750)
Is there a solution to connect my mixer and receive a 7. surround sound?

Found two different ways to make the VIs for NI-FGEN available. Install with LabView 7.0 support, then either:
1. Functions Palette | All Functions | Select a VI
and browse to the "labview 7.0\instr.lib\niFgen"
directory to select the VI
or
2. Copy the niFgen directory from the LV 7.0
instr.lib directory to the LV 7.1 intstr.lib
directory. This will make the VIs available for
selection from the palette where context
sensitive help is available.
Is either of these a correct choice, or is there a better way?

Similar Messages

Why can't I buy the audigy pack off the creative store?

It gives me and error, so I can't get a license.
What are my alternati'ves?
Yes I've verified my info and tried multiple cards. As well as browsers.
So whats this all about?
Basically I get this for a few moments
<table border="0" cellpadding="0" cellspacing="0"><tr><td>Please wait a moment while we process your transaction.</td></tr><tr><td><img height="20" width="[/img] src="https://buy.soundblaster.com/storecontent/c/creativelabsstore/images/trans.gif"></td></tr><tr><td>Please do not leave this page until your transaction is complete. Otherwise, you may not see the confirmation and receipt.</td></tr><tr><td><img height="20" width="[/img] src="https://buy.soundblaster.com/storecontent/c/creativelabsstore/images/trans.gif"></td></tr></table>?
Then I get this:
<table border="0" cellpadding="0" cellspacing="0"><tr><td>TRANSACTION FAILED</td></tr><tr><td><img height="20" width="[/img] src="https://buy.soundblaster.com/storecontent/c/creativelabsstore/images/trans.gif"></td></tr><tr><td>Reason:</td></tr><tr><td><img height="20" width="[/img] src="https://buy.soundblaster.com/storecontent/c/creativelabsstore/images/trans.gif"></td></tr><tr><td>An error occurred in your transaction Reference ID: S-66K2222AR9M9A3J322</td></tr><tr><td><img height="20" width="[/img] src="https://buy.soundblaster.com/storecontent/c/creativelabsstore/images/trans.gif"></td></tr><tr><td>Please click here to try again.
I just want digital 5.
What should I do?
</td></tr></table>

;Thank you very much for the quick reply.
Might I ask why the x-fi and the Audigy 2 se are almost identical?
The x-fi xtreme seems to be a rehash.
However, it seems the audigy has the codec for 5. optical, but the x-fi doesn't.

How can I get back the Audigy mix

Hi!
I just installed the "Creative Sound Blaster Audigy, Audigy 2 series and Audigy 4 series Driver 02.09.006" driver for my audigy 2 card. The problem is that I cannot see the "mixer" on my tray. I searched in the installed folder but there isn't there. After this I downloaded the mixer driver from the creative site but when I doubleclicked the install file, appeared a message that this driver cannot be installed because it is not supported. How can I fix this? I need the "mixer" of my audigy card and no the "windows mixer"..
Thanx for your time..

karapo,
As the (red) announcement at the top of each board tells you, this is not a support forum. This forum is provided for user interaction, so people have a place where they can discuss our products, help eachother, share tips and so on. The replies you'd get on the forum are from fellow users, getting angry at them for not responding to you quick enough will not help!
Regarding the problem, did you get a CD with that card, that you have tried aswell? Is your onboard audio disabled in the BIOS, and have you checked in Control Panel > Sounds & Audio Devices that the card is selected properly there?
When did you receive the auto response e-mail from Support? Check over the mail in case you need to reply to it, it will tell you that you either need to wait for a response, or to mail and let them know if the included links/tips didn't help. If it says you need to wait, then your e-mail will be in the queue and will be answered by someone.
Cat

Why can't I use the original texts?

I'm not quite sure why, but as im editing my new videos, the new text options are only available. I can no longer use the text that was provided in the older version of iMovie. Can someone please tell me why???

Website address?
If Flash is required to use the app on the website, Flash is not supported with iOS devices and Adobe recently announced they will no longer be supporting Flash with any mobile device.

How can i use in the same time input line and mic to recorder in several track whit SONAR

I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english

LIMACAR wrote:
How can i use in the same time input line and mic to recorder in several track whit SONAR 4. I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english
Depending on which soundcard you have there, but if your card is capable for
ASIO -> activate I/O drivers on Sonar/Options/Audio/Drivers -tab (mic/line sources should be listed there --> activate) and select the mic or/and Line sources on tracks "I" - dialog
WDM/KS -> use the Surround Mixer or windows recording controls for recording source selection (mic should be listed there)
MME32 - > same w/ WDM/KS
If you use Asio4All --> same w/ WDM/KS & MME32
No mic and line source simultaenously w/ WDM/KS and MME32.
You perhaps be able to do this w/ kX drivers.
jutapa
ADDED:
You can also install modded version of Audigy 2 drivers/software but I have never done this w/ Li've! 5. so I can't be sure if you get ASIO support for your card.
Here are the instruction --> http://www.tech-pc.co.uk/audigy-2.php
jutapaMessage Edited by jutapa on 05-25-2006 02:48 PM

Midi ports line in ports Fire Wire etc on the Audigy 2 platinum, new Creative Driver for Vis

Hi, I have been using my Audigy 2 platinum dri've for a few years now and have been very pleased with it, the main things I do on my pc is music creation mainly Midi but also some analogue audio as well, I also do lots of video making. I am just about to build a new system with Vista ultimate as the platform, I currently use XP Pro. I have little use for Creative?s own software and personally I do not think it is that good, I know Creative have released a new driver for my sound card But, my question is will my Midi port connections and things like my line in and the auxiliary ports and the fire wire port on the front platinum panel work with this new driver, and without the Creative software installed on my pc, and as we all no by now it looks like we will not be seeing any at all, or not for ages yet. you see I am a wheelchair user and I can not readily fiddly about a the back of my pc that is why a bought the sound blaster so I can easily plug in and unplug what I like, can anyone give me some help or advice on this issue please. ??

Guess I wasn't clear enough. I have uninstalled the soundcard and reinstalled over a dozen times even going so far as making sure all the drivers that the device properties lists are really deleted from the system. I have resinstalled DirectX at least twice using the latest version from MS. The only thing I have not done with DirectX so far is installed the SDK version which I will be doing eventually anyway. I even uninstalled and then reinstalled my video card as it shared files with the sound card. As for getting the latest version of openAL I see little point in that as Windows forces openAL through DirectX anyway and none of my games use it. Nor does the device depend on it to work. Any other suggestions?

I have an Iphone 5 and want to organize all my contacts on line vs on the phone, how can I do that.

1) I have an Iphone 5 and want to organize all my contacts /emails on line vs on the phone, how can I do that? It seems somehow I have about 10 listings for one person - I think some came when I hit facebook to sync - which was a mistake I dont want to share my contacts.
Also easier to type in new addresses on an computer vs the Iphone.
2) I have a book on my itunes from my Ipad that is not downloaded to my Iphone.
3) My Itunes identity on is saying it is my Ipod, how can I have it seperate for Iphone, Ipad and Ipod in Itunes?
Thank you!!

I went into the cloud on phone it was on. Turned off and back on. Now i have 6 of one contactDeleted face books also incase that was the issue. I went to Itunes and couldnt find contacts - now I wonder it is is my outlook email too adding information as I am seeing contacts that are only on my outlook emails.

How can you tell if the line has errors?

I'll try and keep this as brief as possible.
<background>
For 2years (up to 6months ago) I was on BE ADSL and was very impressed with the quality of the service (low latency, decent bandwidth) on my line. However when I heard that FTTC was being rolled out I switched to Zen internet on the understanding that I could then switch to the FTTC product as soon as it was available.
Immediately after switching to Zen I started to experience problems with VOIP (I use VOIP extensions against an externally hosted PBX) and was seeing CRC errors on the line. In the process (~2months) of getting this diagnosed the FTTC product became available and since I wanted uncapped switched to BT Infinity for Business Option 2.
</background>
I now find that again I get sporadic VOIP problems (but not as bad as on the ADSL2 service via Zen) but very regular BBC iPlayer dropouts listening to the radio.
Due to the previous problems whilst on ADSL2 I suspect I still have a minor line fault but as I can't access any stats on the line have no way to verify. Does anyone have any pointers on where to get line stats to see what is going on on the connection? I can't get any info out of the OR modem.
Regarding my network. I am using a cabled, gigabit connection directly to a Draytek 2820n which is in turn doing the PPPoE through the BT OR modem. I use two different machines and experience the same issues on both. I'm a server & network admin by trade so pretty sure it's not my internal infrastructure at fault.
My IP profile is apparently 38717 Kbps down / 10000 KBps up.
BT Speed tester shows achieved 26581 down and 4912 up though

jmansford,
I may be wrong about this as I am only refering to my own 2750n settings,but looking at your upload throughput test results some if not all of your problems could be due to a wrongly wieghted QoS setting and/or port capacity setting based on QoS.
As you line profile is ok at 38717 Kbps down / 10000 KBps up it looks like there is no problem on your actual line,but phone line noise test might find some crackle,but I don`t think so.
By your post,you say your are routing PPPoE through the Draytek into the OR modem.?
If so,maybe you could try leaving the OR or Draytek out of the chain as a process of testing where faults [if any] are.?
To sum up a bit imo leaving the OR modem out of the net chain might be a better way as I only use the 2750n on it`s own as the OR modem is not then needed.
Opps! sorry I might be wrong in my above thinking,but is your Draytek just a router or a modem/router combined like the 2750n.?
But either way the QoS setting are still important.

How Can I listen to the line-in on my T400?

When I am at my desk, I've always had my satellite radio plugged into the line-in on my computer so that I can listen to it through the same speakers. With my new T400, I have the radio's output plugged into the line-in on the Advanced Dock. I know that it's getting a signal because if I record with Microsoft Sound Recorder, it records the radio.
How can I listen live to the signal coming into the line-in?

You can thank Microsoft for this one. They disabled the pass-through ability in Vista. Apparently too many people complained about feedback issues when trying to use webcams or VOIP programs and didn't know to mute the Line-In on the mixer. It took me forever to find how to correct it.
The following will enable the input sliders in your playback devices so audio pass through works without having to run through an application like it worked in XP. Remember, always backup your Registry just in case. I had to create new Keys for filter and SpeakerHp but yours may already be there
1) Open regedit (Start->Run, type regedit)
2) Navigate to HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE1031*8}\0000\Settings\filter\SpeakerHp\
3) Create a new Binary Value
4) Give it the name EnableInputMonitor
5) Set it's value to 01
6) Restart your machine
7) Open your Playback Devices (right click on volume control icon in system tray, select Playback Devices)
8) Open the Speakers/Headphones
9) Go to the levels tab
10) Unmute the input monitor
T500 - P8600 2.4Ghz Core 2 Duo, Modded - 4GB Patriot DDR3 and 320GB Caviar Black 7200rpm drive with Ati HD3650 and Catalyst 9.6 modded drivers - Vista Business 32bit stripped down to bare bones with VM's from Ubuntu to Win7RC1 64-bit.

The bookmarks toolbar is there but has no item buttons on it. How do I get the items back for this toolbar? Also would like to know if the toolbars can be put on the same line to make more room on the page (drag & drop) ??

The bookmarks toolbar is there but has no item buttons on it. How do I get the items back for this toolbar?
Also would like to know if the toolbar can be put on the same line to make more room on the page (drag & drop) ?? Like the menu & bookmarks toolbar could/should fit on same line. This would add more page view...
Floyd Perry
Thanks

Check that you still have the "Bookmarks Toolbar items" placed on the Bookmarks Toolbar
* Make sure that you have the "Bookmarks Toolbar" visible: "View > Toolbars"
* Check in "View > Toolbars > Customize" that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the Customize window onto the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" then click the "Restore Default Set" button
You can only move the content from a toolbar onto other toolbars if all toolbars support that feature. You need to check that in the options of each toolbar.

How many items can be displayed on the same line in APEX form?

Hello,
I have 5 items that I want to display on the same line in a form, but the fifth item is displaying on the next line eventhough I defined it as "no" in Begin On New Line and "no" in ...Field. Is there a limmitted number of items that can be display on the same line? Any help is greatly appreciated, thanks so much in advance.
I want the 5 items to be display like this,
Appendix1 _____ 2 _____ 3 _____ 4 _____ 5 _____
But it is displaying,
Appendix1 _____ 2 _____ 3 _____ 4_____ 5
Thank you,
MT

If you define the 'Begin On New Line' property to 'No', it should work. I just tested it. Do you absolutely need to set the 'Begin On New Field' property to 'No'? That might change the facts.
Best regards,
Mathieu

How can I find out the number of lines in a text file?

How can I find out the number of lines in a text file?

java.io.BufferedReader in = new java.io.BufferedReader( new java.io.FileReader( "YourFile.txt" ) );
int lineCount = 0;
while( in.readLine() != null )
lineCount ++;
System.out.println( "Line Count = " + lineCount );

I am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the

i am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the complete power unit...it seems odd that you have to buy the whole unit again...thanks.matthew

All you need is a plug adaptor, if required. Apple sells an adapter kit:
http://store.apple.com/us/product/MB974ZM/B?fnode=MTY1NDEwMQ&mco=MTA4NDE3MDQ

How can I animate a line to show the creation of a circle?

hello there, I need to animate a line to show the creation of a circle. This is very easy in powerpoint as I can decide how the line has to enter the slide. I cannot believe that captivate cannot do that.... any hints?

Off the top of my head you can do this with 3 objects. The circle and two rectangles that will have motion path effect applied to them that will have an effect of wiping away and revealing the circle below. There's probably an easier way but like I said I just pulled this outa my...
This will work nicely and cleanly in HTML5 since it's a simple motion path effect.
The screenshot shows the two rectangles moving in opposite directions. The lower box should move AFTER the first one is done. I'm showing some transparency so you can see the circle below.

Same material can exist on multiple line items for the same order.

Hi
Is there any specific customising setting or web shop setting through which we can restrict user to add same material on multiple line items for the same order ?
Regards

No.
But if this is a must requirement, you can do an elaborate check during order save in ORDER_SAVE BAdI and return error. So, it will be only during order save.
Eawar Ram
http://www.parxlns.com

Can line in, in the audigy 2 nx provide a 7.1 sou

Similar Messages

Maybe you are looking for