Can "line inside" be set as standard preference?

Can "line inside" be set as standard preference? So that when i make a box with a line, the line automatically is inside the box and not "on" or "outside". I cannot find a way to make it a standard instead of the line "on" the box.

Ade Fowler wrote:
Can someone please verify whether this works in CS5? I want:
Any rectangle – be it a frame or shape – to have a stroke and fill of none. But;
If I then apply a stroke it aligns to the inside.
Currently if I select any rectangle tool with no stroke, the three align buttons are greyed out. Adding a stroke enables them but I don't want a stroke!
I'm sure I'm being daft and missing something obvious but thanks anyway.
Have you tried creating an object style with no documents open? That style will be the default. You can also edit the Basic Graphics Frame and Basic Text Frame properties with no open documents, to modify these primary objects.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Similar Messages

I want to forward a message with the default headers included, but can't seem to set my mail preferences to include the headers when forwarding, just the original message ends up in the forwarded message and not the headers?

I want to forward a message with the default headers included, but can’t seem to set my mail preferences to include the headers when forwarding, just the original message ends up in the forwarded message and not the headers? What I'm trying to do is report SPAM and add headers to a spam message to forward to sites that go after the spammers.

Did you check the article and the add-on mentioned there?

When I tap on the to line to add an address sometimes people's names come up that I don't have as contacts. How can I change this setting?

When I tap on the to line to add an address sometimes people's names come up that I don't have as contacts. How can I change this setting?

The only way that I know currently know of to remove old or incorrect email addresses from the Mail app is to reset the iPad back to factory defaults, which I assume that you don't want to to. You could try leaving feedback for Apple and maybe one day we'll day be able to edit them : http://www.apple.com/feedback/ipad.html#ipad

Downloaded adobe photoshop elements 10 editor from Mac app store onto my mac book pro, set i photo preferences to APE 10 Editor, but can not open any files from my library, error saying " program error". What else do I need to do?

Have downloaded Adobe Photoshop Elements 10 Editor from the Mac App Store onto my Mac Book Pro, set i photo preferences to Adobe PSE 10 editor, but when I try to open a file from my photo library, the following message appears: "could not complete your request because of a program error". What can I do to resolve this issue?

Hi..
Post your topic in the iPhoto community here. That way you can get feedback from iPhoto users.
This community is primairly for issues with the App Store.

How can I set a customized view in finder set as standard for ALL folders?

As I have a large number of folders, I need a specific view in finder: symbol view, sort by program and name. I tried to use this settings as standard for ALL folders, but using the 'set as standard' button does only work for the folder I am in, but not for ALL folders. I even tried to use this settings on the hard disk level in finder, but what ever I tried, it never applies to all folders. The problem occurs on each of my devices and on Yosemite OS 10.10.1. as well as Mavericks 10.9.5. Any ideas on how I can make the 'standard' work on all folders?

As Vinod says, unique key validator would be fine.
However, In Gabriel's blog:
Performing a unique key validation for an attribute that is declared to be unique in the database requires a round trip to the database. This is quite expensive and there is a fast and easy way to work around it.Is false on several fronts:
1). it's not expensive - it's actually cheaper than the alternative
2). Unique key validator can require many trips to the DB to validate - it must check all other rows in the EO to ensure there is no duplicate, and all of those rows must be fetched into the middle tier to do the validation: this is expensive.
The "cheapest" way to do this: unique constraint in the DB
John

When I open Safari, I always type command-plus to enlarge the view. However, I can't figure out how to permanently set the Safari screen to this view setting in the preferences. Any ideas?

When I open Safari, I always type command-plus to enlarge the view. However, I can't figure out how to permanently set the Safari screen to this view setting in the preferences. Any ideas?

Sorry, but you must Command + for every page. It's not permanent.
If you haven't tried yet, check out Zoom in Safari > Preferences > Accessibility

After i update my mac from snow leopard to mountain lion i can't use zoo with 2 finger i already setting in system preference but nothing happend

i have mac book pro and couple week aga i update and buy to mountain lion but my mac getting slow and i can't use zoom 2 finger i allready sett in system preference but nothing happend still can't use 2 fingger

Hi galleryskins,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
OS X Mountain Lion: Zoom content on the screen
Zoom with a mouse or trackpad
To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
I hope this information helps ....
Have a great day!
- Judy

TS4036 I have a Macbook pro and I'm trying to set up my ICloud on it, and when I go to Preferences, there is NO ICloud there. How can I get ICloud back into "my preferences" to set it up?

I have a MacBook Pro, its 1 year old. I'm trying to set up my ICloud on it, and when I go to "preferences", (it says to go to "Preferences" in the instructions,) and then "click" on "ICloud", but my ICloud is not there. How can I get "ICloud back into "my preferences".

Welcome to the Apple Community.
This suggests you don't have the right operating system. OS X 10.7.2 or better is required for iCloud, which operating system do you have.

HOW CAN I GET LINE IN ON SOUD IN SYSTEM PREFERENCE I NEED TO CONNECT MY GUITAR.

HOW CAN I GET LINE IN ON SOUD IN SYSTEM PREFERENCE I NEED TO CONNECT MY GUITAR.

Please do Not type in ALL CAPITALS. It is considered shouting in online communications. Now, in System Preferences, click on "Sound", and in that window click on the "Input" tab shown below. Then in the list below that click on "Line In." That will activate the Audio Line-In Port.

Is it possible to set your language preference on books so you can avoid looking at books in languages you are not interested in ?

Is it possible to set your language preference on books so you can avoid looking at books in languages you are not interested in ?

Hi,
I don't think so, I would be happy to have such function too.
In the French iBook store there is a section where you can find books by language, I guess in other countries there is the same section. But it's not really convenient…
Hope this helps,
Guillaume

I set a Special Ring Tone for One of my contacts and now I want to set the standard tone again. How can I adjust the iPhone to always use the standard tone?

I set a Special Ring Tone for One of my contacts and now I want to set the standard tone again. How can I adjust the iPhone to always use the standard tone?

Yeah, I did. But if I go to settings and change the standard ring tone again, the ring tone for that special contact is still the old standard tone. But I want to 'tell' my iPhone/iPad that this contact should always have the standard ringtone from settings.

Can links inside "set text of container" behaviours open in a new page?

I am using the set text of container behaviour to show different information within the same page, to keep things neat and simple to navigate. Some of the text needs to be external links, but they open in the current page, not a new page even though I have set the target to _blank.
Is there another way to keep using the set text of container and have the links open in another page?
thanks!
Using CS6 on Macbook Pro 2.6Ghz OSX10.8

gryffun wrote:
Well, after some further google searches, I'll answer my own question...
selecting the link inside the set text of container and adding a behaviour to it - "open in browser" will make the link open in a new window.
Or ading target="_blank" to each link will do the same

Multiple users sharing one set of ARD preferences

I need to be able to have multiple users share a common set of ARD preferences which are stored in a central location. Is this possible with ARD? If so is there a difinitive description on how to do this?
All users will be using MacOs 10.9.2 and ARD version 3.7.1

user515989 wrote:
I'm a Forms developer, and Apex looks intriguing yet formidably intractable. Where are the triggers for
pushbuttons - I can easily create a button but there's no obvious "create trigger" bit to accompany it.
I guess I'm lacking understanding the gut essence of Apex; I've had a look at a few tutorial and the stuff
I've read so far falls far short of acceptability - the manuals have one or two sentences of "aims" at
the start of a section followed by fifty-point lists of "do this, do that" instructions then they round it
off with an audaciously arrogant section at the end along the lines of "Now you know how to do XYZ".
What this lacks is the "essence" of the task - I have to reverse engineer each blooming step to try and
understand what it is meant to achieve.
Have I missed any damn good tutorials out there - there must be some (except those boring Youtube
videos where we watch someone perform the fifty-step routines again without explaining the essence).
Can you tell that I'm frustrated by a lack of documentation; I risk losing your kind support in my early
foray into Apex (help a drowning man please :-)
Thanks again in advance
Mungo :-)Its important to remember that Apex is nothing other than a framework for creating HTML and running web pages. So what used to be triggers are now standard javascript events. Although you will find help on the forum for javascript and maybe some in the documentation, javascript events are standard and not proprietary like Forms triggers were. Its frustrating, but there are a TON of resources (google) on the basics of javascript. For instance instead of when-validate-trigger, you'll probably look at the onblur event to trigger a piece of javascript code to run your validation. You can use onfocus which would be sort of like when-new-item-instance in Forms-speak.

My administrator account was set to standard?

So I just got a brand new macbook pro about 4 months ago. It was working perfectly, until last night everything froze and stopped responding, so I restarted my computer. But when it restarted it took forever to reboot and when it finally did it just gave me options to restore with time machine, reinstall os x lion, check my disk for problems or search for help. After trying to get all the other options to work (none of them did), I opted to reinstall os x lion (wasn't too worried about losing files or data or anything seeing as there wasn't much on here yet anyway).
So the reinstall seemed to work fine. All the mac basics were there and stuff and some of my files had even been recovered. But when I tried to reinstall an application I had lost, it asked me to enter the admin information to confirm that this was ok. When I entered my username and password, it didn't work. I tried multiple times and it kept not working. So I checked Users and Group settings and sure enough, my account (the only account that exists on this computer) is set to standard! So now my computer has no administrator account. Obviously, I need one to reinstal all my apps, so please help? D:

Hi
Do this, print it out and enter the commands carefully
1. Reboot
2. Hold command + s key down after you hear the chime.
3. When you get a text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
(Type these commands very carefully)
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
4. You will go through the setup process again, create a new admin account, login to it and then change your existing account password or whatever else you need to do. You can delete the account you made in this process, or not.

How to set naming standards for SQL Developer

I am using SQL Developer version 3.0.04.
In the newly integrated and very useful Data Modeler, we can set preferences for the naming standards to be applied when creating logical and relational model objects ( primary keys, foreign keys, et cetera). I would like to know if there is a way to set naming standards for the relational objects we create in SQL Developer on existing tables ( ( primary keys, foreign keys, et cetera).
Any help in setting such preferences would be appreciated.

Hi,
If you want to set up a diagram for an existing database, you can use File/Data Modeler/Import/Data Dictionary to import its definitions.
Alternatively you can open a Data Modeler Browser (using View/Data Modeler/Browser), expand the node for Design "Untitled_1",
expand the node for Relational Models, and select Show from the Right-click drop-down menu for "Relational_1" to create a Relational Model diagram.
You can then drag Tables from SQL Developer's Connections tree onto the diagram.
Once you have a Relational Model you can reverse engineer it to an Entity-Relationship model using the << button in the button bar
(or by selecting "Engineer to Logical Model" from the drop-down menu for the Relational Model).
Note that there is now a separate forum for SQL Developer Data Modeler topics: SQL Developer Data Modeler
David

Can "line inside" be set as standard preference?

Similar Messages

Maybe you are looking for