Can Linksys WLAN Router corrupt ATT DSL password?

I'm working for a non-profit agency that's using a Linksys WRT54G (not sure of the firmware version or revision). In the past three weeks they've dropped connection with ATT causing outages at the office. The solution has been to reset the DSL password each time. ATT claims there is nothing on their end that's corrupting the password and that the Linksys WLAN router may be to blame. My question: Can this even be possible? Can the router be corrupting the password somehow forcing ATT to reset it? Needless to say it's annoying at best - and difficult at worst to talk the client through changing the password in the router, for the ATT email authentication, and reconnecting all the workstations that use the wireless router (they've got Faronic's DeepFreeze on them). Any suggestions or guidance on why this may be happening would be appreciated!

Seems impossible for router to corrupt password. But still try to update to latest firmware to ruleout that possibility.

Similar Messages

Linksys wireless router no wpa key & password data saved on desktop as promised

Hello,
Who can help me with the following problem. I set up a wireless netwerk with help of the installation guide on the cd, I was in the last step in which was stated that the WPA key was saved on my desktop in a text file, and unfortunately clicked finish while not have checked if the document was there.
Now I have a nice wireless network, which I am not able to connect to, because there was not a text file saved on my desktop with the WPA code.
While I am not able to connect, I can not log in to the router, to maybe be able to change settings there.
What should I do? How can I reset the router, I alreay tried the reset button, does not work..
Thank you for letting me know.
Regards,
W

After resetting the router while re-configuring don't use the CD to install your router...You can configure your router manually...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
To set-up Wireless Security click here

Which Wlan router do I need?

Please can anyone help?
I am on a BT line and my service provider is wanadoo through orange. I want to go wireless.
What sort of router do i need?
Thanks

Hi
Sorry for this question but why did you post this question in the Toshiba forum???
There are so many WLan routers on the market and I think you should read some test articles about the router hardware. Maybe then you will bring more light into this case.
By the way, I use the WLAN-Router Sinus 154 DSL Basic 3

Having trouble setting up a linksys WRT54GS router with v...

Having trouble setting up a linksys WRT54GS router with verizon DSL using a westell 6100F modem. the modem works fine by its self but the router will not connect to the internet when installed like the cd tells you to.
online help and phone help has been less than helpful, anyone have any Ideas?

Ok I found " Installing the liksys wireless router with a westell 6100 modem" in the verizon troubleshooting guides. printed the instructions so I would'nt forget. step 1 open your web browser and enter http://192.168.1.1 in the address field. PROBLEM it comes up with a login screen that I don't know how to sign into. tried the obvious stuff. cannot get past the login screen. I knew this sounded to easy to be true. anyone have any ideas?

Using Airport Express with an ATT DSL router

July 10, 2012
Hi All! The following thoughts are for
     1) those of you who use ATT DSL as your internet service-provider, and
     2) who wish to stream iTunes songs from your computer to speakers in other rooms via AIRPORT EXPRESSes, and
     3) are wondering whether you have to purchase a separate Apple Airport Extreme base-station, or can simply use your exisiting ATT router.
Having just spent several days and many hours on the phone before Apple's tech "Dan" was finally able to get my system up and running, I thought some of you might appreciate my sharing the following info while it's still fresh in my mind.
1. You may need to update your ATT router to the latest version, in order for it to properly communicate with your AIRPORT EXPRESS(es) (henceforth shortened to "AEs"). The AEs use 802.11n speed. My original ATT router (a 2Wire 2701HG-B) was no faster than "-h," and this might have been part of the problem as to why my system wouldn't work. I went to my local AT&T store, and got their latest router: as of this writing, a Netgear "Westell" Model B90-755025-15, which can run at both the slower speeds as well as the faster "-n." To find out some of the specs of my router, an Apple tech had me type in the 10 digits of my Gateway IP Address into the address-bar (no need for the "https://www") and "Presto!", up popped several pages of info on my router.
2. When first setting up your AE, it needs to be back in "default mode." If it's right out of the box, you don't need to do anything. But if, like me, you've already made several attempts to get it running, then you need to reset it to its pre-configured state, You do that by taking a bent paper-clip, and inserting one end into the little hole on the ports-side of your AE (near where the mini-plug of a speaker-cable is inserted). While the device is plugged in, gently press the paper-clip into the hole until the light on top blinks amber QUICKLY, the flashes coming in rapid succession. Then remove the paper-clip, and the AE will glow solid amber--meaning it's waiting to be re-programmed.
3. When first setting up your AE, do NOT attach an ETHERNET CABLE from the router. The only cable that needs to be attached is the mini-plug cable running to some sort of portable, powered speaker. For myself, to make things easier, I brought my AE and my new Sony RDP-M5iP speaker/dock into the same room as my Imac & router. That way, I'd know immediately if the AE was working correctly.
4. After you've clicked on your Airport Utility App (hard drive TO Applications TO Utilities folder), you'll soon come to a page that asks you to name your AE (this page calls it a "base station"). Before you do that, you should see a button in the lower left-hand corner that says, "Other Options." Click on it. You'll then be given a choice of "Creating a New Network" or "Choosing an Existing Network." You want this 2nd choice--because you indeed are planning to use your ATT router's exisitng wireless network.
5. Shortly, you'll come to the page asking you to name your AE. Call it, for instance, "Family Room Speaker." As for password, at first I--as well as virtually all of the techs with whom I spoke--thought I should type in the multi-digit ATT router-password (called a "Wireless Network Key"). But finally, "Dan" told me to simply type in, "express1" (or, for my 2nd AE, "express2"). That did the trick!
6. Your AE should now be glowing green on top. Plus, on the 10x6" dark-grey rectangular box displaying the globe (i.e., your main internet connection), the globe should have a now-green glowing circle to its left. And underneath, it should be displaying a rectangle named "Family Room Speaker" (or whatever name you've given your Airport Express).
7. When you now open iTunes, you should see a little blue rectangle (with a triangle in its middle) in the lower right-hand corner of your iTunes box. Click on it, and it should show listed both your computer-speaker as well as your AE speaker(s), plus a heading called "multiple speakers." Click on "multiple," and it will bring up a box displaying all your now-current speakers. Check the small square next to any speakers that are unchecked, and a volume-slider will appear. Bring them all up to a comfortable level. Then click on an iTunes track you'd like to play and, viola!, you should hear music playing both from your computer and from the portable speaker to which your AE is attached.
8. Now close iTunes. Then unplug your Airport Express and--if you have a 2nd AE-- plug them both back into your power-strip. Go thru the set-up steps in your Airport Utility App for this 2nd AE. At the end of it, both AEs should be glowing green on top, and both should be displayed on your computer-screen.
Now re-open iTunes, and start a song playing. (Don't forget to click on the blue rectangle at the R-hand bottom, and activate the new AE speaker.) By inserting your speaker cable alternately into each of the AEs, you should be able to verify that, yes, both are now working.
9. Unplug both AEs, and bring them to whatever room you want to use them in. Plug them in to a wall outlet, and run your mini-cable from the AE to the speaker. Give the AEs a few minutes to pick up the signal once again from your ATT router; when they do, their lights will change from amber back to green. Tech Dan warned me to keep them away from too much metal, to avoid interference. As soon as they turn green, you should now be hearing your iTunes track playing thruout your house! (If not, you may have to first close iTunes on your computer, then re-open it, and start a new track playing.)
The BOTTOM LINE: no, you don't have to purchase a separate Apple Extreme to be your base-station. Your ATT router--if it's running at the 802.11n standard--should be able to work with your Airport Express(es)!
My thanks to Sean and Cameron and Chris and, most especially, Dan, the Apple techs who patiently worked with me to get this system online.

I am GREATLY appreciative of this overview. Even though I don't understand a lot of it. I will keep working through. I am-- have for 2 years-- had terrible connectivity with AT&T's service & 2Wire router. My MacBookPro keeps dropping the signal. I'm talking every few clicks at times. Husband's PC drops it, too, but not nearly as much as the Mac. I'm sure what you posted can help us get better connectivity.

Successful DSL Setup With Westell 6100G and Linksys WRT54G Router

After a week of searching I finally figured out how to get DSL setup with my Linksys router.
All I could get out of the Westell > Linksys router configuration was DSL downloads limited to less than 0.2 Mbps.   No matter what I did on the router settings that was it.    I had a second eHome router that easily configured and achieved the 1.0 Mbps download speeds so that confirmed Verizon and the Westell modem were not the issue.
So what's wrong with the Linksys router configuration?    I had the Linksys WRT54G router Version 5.   Checking the firmware it was the original release of 1.0.0.   (See your routers instructions which can be downloaded from Linksys for how to check your firmware).   I downloaded the latest firmware version for this router model and version number.    Following the Linksys instructions I flashed the latest firmware 1.02.8.   Now I had an updated modem ready to be configured for DSL.
Assuming you already followed Verizons instructions to set the Westell modem to bridge mode setup your router to work with it.
Step 1: Go into the modem typing its address... Default 192.168.1.1   leave the ID blank and the default password is admin.
Step 2: Go to the Basic > Setup screen.
Step 3: Select PPPoE and the screen menus will change
Step 4: Enter your Verizon ID (exclude @Verizon.net)
Step 5: Enter your Verizon Password.
Step 6: Go to the bottom of the screen and hit Save.   Wait and the router will indicate it was saved.
That's it.  All you need are the three entries above to get it working. Turn off the PC, Router and Westell.   Turn on the Westell, then the router and then boot the PC.   It should work at this point.    I now get the full DSL speed for both downloads and uploads.
The bottom line....check you router, especially the older models for updated firmware before you give up on it.

Glad top see you found a configuration for your Westell and Linksys to function. Thanks for posting resolution.
Mike_VZ
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms of Service, or your Customer Agreement Terms and Conditions or Plan.

I can reset the router password pls help

i gold the reset buttong for 45 seconds anunplug the power for 20 and the is still doesnt let me in the administration

What router are you using?
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

My iPad will no longer connect to my Linksys wireless router. Every other electronic device in our house connects just fine. What can I do?

I have an iPad (the earliest version) that used to connect to my Linksys wireless router with no difficulty. One night recently I could not get on the internet through my iPad. I checked the Wi-Fi information, which said it was not connected.When I go through the process of choosing a network, on which my home system is clearly listed along with a very strong signal strength, I am told that my iPad is unable to join my own network. All the other electronic devices in our house are connected and functioning fine. Can anyone walk me through the steps to correct this problem?
I need to add that I took my iPad to the Appple store, and the clerk there reset something--I don't know what--and my iPad was able to connect to their network. When I came home, though, I was not able to connect to my home network.

If everything else is connecting with no issues, I would go into the wifi setting on the iPad and redo the info there, user, password and anything else related to your wifi at your house.
It is possible whatever he reset may have reset something to default setting which will not allow it to connect. If you need too then verify the wifi setting by comparing it with another device setting that works on your home network.
Good luck

I recently purchased an airport extreme base station. I want to replace my older linksys wireless router. I had a successful set up but can not get it to talk to broadband modem, I am missing something but what?

I recently purchased an airport extreme to replace my older linksys wireless router. had a successful set up but can not get connected to the internet. for some reason, which I am sure is apparent to others, i am missing some needed info to connect to the dsl broadband modem that I have. would love some good tips.

Try this:
Turn off or remove power from the DSL model, the router, and your computer. Wait not less than one minute. Restore power to the modem and wait until the status lights indicate a connection to the ISP. Next, restore power to the router and wait until the status light shows connection to the modem. Last, turn on the computer. Check your Network preferences to be sure they are configured for a DHCP connection and that the router has received a valid IP address (not 169.xxx.xxx.xxx).

Can't connect PB G4 to linksys wireless router when 64bit is established

Hello-
I have my PB G4 connected (wirelessly) to a linksys wireless router WRTP54G. If I don't have security set on the router, the PB connects. Once I add the security (64bit) and enter the password, the message "There was an error joining the AirPort network” comes up and I can’t connect. I've connected my other laptop to the network (a PC).
Any ideas on how to fix this? Thank you in advance.

Does your router support any other form of encryption? See if this KB article makes any sense to you.
AirPort: Joining an encrypted wireless network
Personally, I have a sneaky suspicion it has to do with the way your ASCII/hexadecimal password is or isn't being converted to something recognisable by the router. I use a Linksys router at home with a hexadecimal password generated from an ASCII passphrase, and that seems to work fine.
Yang

I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal ?

I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal .i live in a three story home and my linksys is in the basement. I have one cable on the top floor where most of my computers/ipads are.

can i connect a time capsule through cat 5 cable for my apple products and to boost my signal
Yes, configure the Time Capsule to create a wireless network using the exact same wireless network name and password as the Linksys wireless network.

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

When I changed my ATT email password, I can no longer open my email in my Iphone, even after updating my password. What do i need to to do?

When I changed my ATT email password, I can no longer retreive my email on my Iphone, even after updating my password in my Iphone. What's wrong? How do i fix it?

make sure the outgoing (smtp server) has the updated password also. settings>mail,contact,calendars>then at account>it will say outgoing, smtp or advanced. after clicking on the smtp it will have an option to change that password, delete it and add ur new one

New Ipod Touch 5g can't access Internet in home network (using Linksys E4200 router). But, OK with other Wifi.

Just bought new Ipod Touch 5g. I found out it can't access Internet in home network. not really cannot access, but very slow to open any web page, App Store failed to access, etc. But, OK with other Wifi (office & starbucks). Others existing iOS devices (Iphone4 & Ipad2) have no problem like this. I'm using Linksys E4200 router at home. anyone has any idea why?

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

No WLAN light, computer can't find router.

NO WLAN light on the WRT54G router. Error message when run CD "can't find router". Somehting I can fix or shoud I take it back? Frustrated

First connect you router with a cable to a PC and open your DOS prompt. (start>run type in cmd and hit enter) From the prompt type in ipconfig /all and look and see if it finds a default gateway with a IP address. It should be by default 192.168.1.1 but may be changed. If you do have a default gateway then type in ping 192.168.1.1 (what ever the gateway is) and hit enter. Do you get 0% loss? If this does not show anything try ruling out the network card by typing in ping 127.0.0.1 and hitting enter. That is a internal loop back which tests the network card. If you get any loss then replace the network card and try again. If you get 0% loss then it is good and try swapping cables and connecting to the router again. If you still can not see the router then it is defective.
Richard Aichner (Ikester)

Can Linksys WLAN Router corrupt ATT DSL password?

Similar Messages

Maybe you are looking for