Can list value of size can be limit in designer?

Can list value of size can be limit in designer?
How to configurate it?
Thanks

Hi Emily,
If you are talking about List of values in designer then yes maxno of lovs can be 256.
Please ignore this if it not appropriate
Cheers,
Suresh A.

Similar Messages

Bulk uploading the Pick List Values

Hi,
I have to create a cascading for states and then cities, which i have to use acorss the application in Leads, account and contact. Can any one please tell me that, is there any way of uploading the pick list values and how can i use the same thing at different places.
Regards
Nisman

Hi Alex,
I tryed this option. It is uploading the values in the City and state picklist field (at account view), but when i tryed drill down the picklist field, i didn't find any other value in that. I checked the same in the field level setup in admin section, no value was uploaded in the pick list value of that field.
Any other idea of doing the same?
Regards
Nisman

Where can I Increase the size limit for attachments

Good Morning:
I am working in OCS R2 (9.0.4). Where can I Increase the size limit for attachments in the messages sent. Also can I set this parameters to user level or the change affect every user in the system?
Thanks a lot.

babowa wrote:
The only way to increase the fonts on your desktop would be system wide by going down a notch on the resolution. Some people won't do it because it increases the pixel size so the fonts won't be quite as sharp; I decided I'd rather have that than having to squint continuously. Go to System Preferences > Displays > Scaled > this will give you all resolution options available. No harm in trying - just check the default (top) choice again if you don't like any of the others.
It's a b*&^ch getting old . I still use the screen zoom instead of decreasing resolution, but maybe soon ...

How do I increase the point size and change the font for the windows and boxes on Maverick such as the tiny print on the email inbox list of messages. Can increase size on the actual message but not on the list of messages.

How do I increase the point size in the dialog boxes and especially on the list of messages on email? I can increase the point size and font of actual messages content but not the LIST of emails in my inbox. They are too small for me to read.

This discussion is for computer built before 2006.
You could use a different mail app. Consider thunderbird.
It can be hard to find with community ( forum ) to post to. Here is an easy and complete list:
https://discussions.apple.com/community
I'll ask the host to move this post to M.
Robert

How can I manage byte size of a string value in java?

Hi,
How can I manage byte size of a string value in java? I have NAME column in my database table, of type VARCHAR2(128). Supports multilingual, so value in Name can be English, French or Dutch.. like that. Byte size of English character is 1 and that of French is 2 and varies.. . Because of this reason I find difficulty in insert query. Please suggest solution.

But the event does not really have a size - you can export the photos and make the size pretty much what you want - while it is in iPhoto it is an event
I guess that iPhoto could report the size of the original photos as imported - or the size of the modified photos if exported as JPEGs - or the size of the modified photos if exported with a maximum dimension of 1080 - but the event simply is photos and does not have a "size" until you export it
Obviously you want to know the size but the question was
what is your puprose for knowing the size?
WIth that information maybe there is a way to get you what you want
But the basic answer is simply that an event does not have a size - an event is a collection of photos and each photo has either two or three versions in the iPhoto library and each photo can be exported for outside use in several formats and at any size
LN

Toystore: Custom TextField Renderer - can this be applied to list values?

If you use a list value with a Binding Container and the Struts Validator it behaves similar to the discussion in the toystore notes (the original value is lost - resets to the model value). Can your same idea in toystore be used to fix it for list items, and if so, how? (I'm trying by applying a PickList renderer on numbers but not getting anything working).
Thanks for help!!

Hi,
If SharePoint were to enforce uniqueness on a column in a list where users are only allowed to see and edit list items that have created, then you could have a scenario where -
a. user1 tries to add a new item to the list which violates the uniqueness constraint
b. SharePoint reports an error
c. user1 gets to know that there is another item containing the same value in this list
d. this violates the security settings that you configured (each user should be allowed to only see the items that they have created). Now if you change the permissions settings to allow users to SEE all items, but only
edit items that they have created, this error disappears (obviously).
Now getting to the workaround you mentioned (creating a unique constraint on the SQL Server table). This is not going to be possible for numerous reasons -
a. Modifying (or for that matter, even performing SELECT operations on) the SQL Server tables is an unsupported operation and it will definetely break other things in SharePoint, not
to mention that you will lose all support options from Microsoft. However if you don't care about this, then it will still not be technically possible because...
1. SharePoint does not create a new SQL Server table for every list/library.
2. If you did get around to enforcing a unique constraint in the one single table that SharePoint uses for all lists, then you will be enforcing this constraint on each and every list in all the sites and in all the site
collections that are assigned to that content database.
Please "Mark as Answer" if a post has answered your question or "Vote as Helpful" if it was helpful in some way. Here's
why

Can the Parameter Enter Value screen size be adjusted?

I have a report that will have up to 4 to 5+ different individual Parameters that will require the users to populate.
Since I am using a larger number of parameters the Enter Value screen size is small and not all of the parameters are displayed on one screen. the users are required to scroll down in order to see and populate the other Parameter selections.
Is there a way to adjust the default size of the Parameter enter Value screen that the end users will see when using the Cyrstal Report Viewer?

Try Service Pack 3, if still not then it's likely the type of parameters you are using.
Bottom line is if there is no option to change the size of that window. I believe someone asked for this and I entered it in as an enhancement request. Some future version may eventually have the ability to auto-size.
At the top of this forum you'll see a Feature Request link, add your suggestion there, search first though in both of the links.
Thank you
Don

How Can I Determine the Size of the 'My Documents' Folder for every user on a local machine using VBScript?

Hello,
I am at my wits end into this. Either I am doing it the wrong way or it is not possible.
Let me explain. I need a vb script for the following scenario:
1. The script is to run on multiple Windows 7 machines (32-Bit & 64-Bit alike).
2. These are shared workstation i.e. different users login to these machines from time to time.
3. The objective of this script is to traverse through each User Profile folder and get the size of the 'My Documents' folder within each User Profile folder. This information is to be written to a
.CSV file located at C:\Temp directory on the machine.
4. This script would be pushed to all workstations from SCCM. It would be configured to execute with
System Rights
I tried the script detailed at:
http://blogs.technet.com/b/heyscriptingguy/archive/2005/03/31/how-can-i-determine-the-size-of-the-my-documents-folder.aspx
Const MY_DOCUMENTS = &H5&
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("Shell.Application")
Set objFolder = objShell.Namespace(MY_DOCUMENTS)
Set objFolderItem = objFolder.Self
strPath = objFolderItem.Path
Set objFolder = objFSO.GetFolder(strPath)
Wscript.Echo objFolder.Size
The Wscript.Echo objFolder.Size command in the script at the above mentioned link returned the value as
'0' (zero) for the current logged on user. Although the actual size was like 30 MB or so.
I then tried the script at:
http://www.experts-exchange.com/Programming/Languages/Visual_Basic/VB_Script/Q_27869829.html
This script returns the correct value but only for the current logged-on user.
Const blnShowErrors = False
' Set up filesystem object for usage
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("WScript.Shell")
' Display desired folder sizes
Wscript.Echo "MyDocuments : " & FormatSize(FindFiles(objFSO.GetFolder(objShell.SpecialFolders("MyDocuments"))))
' Recursively tally the size of all files under a folder
' Protect against folders or files that are not accessible
Function FindFiles(objFolder)
On Error Resume Next
' List files
For Each objFile In objFolder.Files
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:01", objFolder.Path
On Error Resume Next
FindFiles = FindFiles + objFile.Size
If Err.Number <> 0 Then ShowError "FindFiles:02", objFile.Path
Next
If Err.Number = 0 Then
' Recursively drill down into subfolder
For Each objSubFolder In objFolder.SubFolders
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:04", objFolder.Path
FindFiles = FindFiles + FindFiles(objSubFolder)
If Err.Number <> 0 Then ShowError "FindFiles:05", objSubFolder.Path
Next
Else
ShowError "FindFiles:03", objFolder.Path
End If
End Function
' Function to format a number into typical size scales
Function FormatSize(iSize)
aLabel = Array("bytes", "KB", "MB", "GB", "TB")
For i = 0 to 4
If iSize > 1024 Then iSize = iSize / 1024 Else Exit For End If
Next
FormatSize = Round(iSize, 2) & " " & aLabel(i)
End Function
Sub ShowError(strLocation, strMessage)
If blnShowErrors Then
WScript.StdErr.WriteLine "==> ERROR at [" & strLocation & "]"
WScript.StdErr.WriteLine " Number:[" & Err.Number & "], Source:[" & Err.Source & "], Desc:[" & Err.Description & "]"
WScript.StdErr.WriteLine " " & strMessage
Err.Clear
End If
End Sub
The only part pending, is to achieve this for the 'My Documents' folder within each User Profile folder.
Is this possible?
Please help.

Here are a bunch of scripts to get folder size under all circumstances. Take your pick.
https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
¯\_(ツ)_/¯

How can I control the size of a cell in the GridBagLayout?

Hi,Swing Gurus
I am developing a swing-based program using JBulider5 enterprise.
It seems to me that the GridBagLayout is really a hard nut!
How can I control the size of a cell in the GridBagLayout?
It seems that I cann't control the size of a cell directly.
But how the size of a particular cell is determined when I switch the layout manager from XYLayout to GridBagLayout?
Thx in advance!
Regards,
Justine

hi,i have not done what you are asking but there are fields like
COLUMNWIDTH, MINSIZE, MAXGRIDSIZE, PREFEREDSIZE to which you can set the appropriate values and test for your need.hope this helped.bye martian.

How can I control the size of the af:InputText?

Hi,
How can I control the size of the 'af:InputText' on the UI, without using columns & rows attributes. Even though I am using width & height attributes, the changes are not getting reflected in the UI.
Thanks,
Rajesh.

Hi,
It is inside a 'af:PanelBox'. So, the parent container also determines the size of the child? Here I need a create a 'pidgin chat window' kind of an interface with a fixed size top-level container, inside which I willl put all my components. The code looks something like this:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" partialTriggers="it1">
<af:messages id="m4"/>
<af:form id="f1" partialTriggers="it1">
<af:panelBox text="" id="pb1" background="dark" type="stretch"
titleHalign="start" ramp="highlight"
inlineStyle="width:350pt; height:500pt; margin:0.5pt; padding:0.5pt; border-width:0.5pt; "
partialTriggers="it1">
<af:spacer height="15pt" id="s1"/>
<af:inputText id="ot1"
columns="82" rows="25" wrap="hard"
partialTriggers="it1"
value="#{ChatClientBean.chatLog}"
binding="#{ChatClientBean.outputChatTextBox}"
visible="false">
</af:inputText>
<af:spacer height="27pt"/>
<af:inputText id="it1" inlineStyle="width:200pt; height:100pt;"
valueChangeListener="#{sessionScope.ChatClientBean.sendMessage}"
autoSubmit="true" partialTriggers="it1"
binding="#{ChatClientBean.inputChatText}"/>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>
Thanks,
Rajesh.

HT5766 Where can I find the size of a download for a software update now?

Hello,
Where can I find the size of a download for a software update now?
Since I upgraded to Mountain Lion (Mac OSX 10.8.3) this information is no longer available in software updates listing you get if you click on the Software Update menu item from the Apple menu.
I found the download size (often hundreds of megabytes for an individual update and sometimes a set of updates might amount to a few gigabytes) to be very helpful, and now that it seems no longer available (I can't even see it on the web page I came to for more information, thinking the download size would surely be specified there), it is frustrating. My current example is iTunes 11.0.3
I would greatly appreicate having this information back in the software updates listing, but since it is no longer available there, and I don't know where else to find it, if anybody can enlighten me to its whereabouts, I'd be grateful.
Thanks and cheers!

stewedapples wrote:
I would greatly appreicate having this information back in the software updates listing, ...
You can leave Feedback for Apple here...
http://www.apple.com/feedback/
stewedapples wrote:
... I don't know where else to find it...
http://support.apple.com/downloads/#

Upto how much I can set maximum Heap size for jvm?

I am running application on 8GB RAM Windows 64 bits machine.
I am running out of OutOfMemory (Heap Space). I want to increase the Heap Size for my jvm.
But can anybody please tell me what is the limit by which I can set the maximum size for heap?
Thanks in Advance,
Jenish

Max allowed memory per process is 2 raised to the 64th power. What maximum memory you can set depends on the memory available
for your application. You may be able to set more than 8GB ram then it will use the swap space and it will slow down your application
performance. So try different memory size and see which one works best for your application.

How can I know the size of a JViewport laid out in BorderLayout.CENTER?

I have a JPanel inside a JScrollPane. The scroll pane is laid out inside of BorderLayout.CENTER. I need to know the size of the JViewport to do stuff like centering and zooming.
Where can I find the size? All these methods return 0 values for X and Y:
myScrollPane.getViewport().getSize()
myScrollPane().getSize()
myScrollPane.getHorizontalScrollbar().getValue()
Yes, even the scrollbars won't give me any values! It's all because of the BorderLayout!
Any ideas? Thanks.

Sounds like you are accessing the sizes before the views are realized (that is before a call to frame.pack()/show()) They are available only after the layoutManager had a go on it. What is available earlier are preferred/min/max, though.
Greetings
Jeanette

Can we specify Font size in the Inspector window?

I am a whiz at MS Word. I'm totally lost in Pages. My current dilemma is how to specify the size of my text in the inspector window. Is it possible?
Currently, the only way I can change the font size is by clicking Format > Font > Show Fonts > and making the change in the new window. Is that the only way?
Sigh. Here's hoping I can figure out Pages soon or I'll be stuck in limbo, juggling both a PC and a Mac.

You might want to explore the keyboard shortcuts.
⌘ +T will show your fonts. (Lot easier than using the menu.)
I also changed the increase font size shortcut from ⌘ + and - to ⌘ + > or <, just like Appleworks. You can change the shortcuts using the keyboard system preference.
<ol type=>
Choose Apple menu > System Preferences and click Keyboard & Mouse.
Click Keyboard Shortcuts.
To disable a shortcut, deselect the checkbox next to its description in the list.
To change the key combination for a shortcut, select the character in the Shortcut list. Type a new shortcut by holding down the key combination that you want to use instead.
Tip: You cannot use each type of key (for example, a letter key) more than once in a key combination.
Quit and restart any applications you are using for the new keyboard shortcut to take effect.
Kurt

"Streaming Buffer Size" pop-up menu does not exist under Advanced when I use iTunes - Preferences - Advanced. How can I increase buffer size?

How can I change buffer size in iTunes 10? "Streaming Buffer Size" pop-up menu does not exist under Preferences--Advanced.

Hi all, iTunes streaming victims.
I struggled long with the streaming buffer problem of iTunes and indeed could solve it with increasing the buffer size, which features has been removed in iTunes 10. And this without updating the instructions by Apple!
Here is my solutions:
http://www.rogueamoeba.com/airfoil/
perfect for all wireless audio streaming not only for itunes, but any source on the Mac.
solved the problem completely for my 3 MacBooks, 2 airports, iphones etc.
it is not for free but a very good value for money.
cheers, Wil

Can list value of size can be limit in designer?

Similar Messages

Maybe you are looking for