Can location services get disabled automatically? Or does it always require a user to disable it?

Can location services get disabled automatically? Or does it always require a user to disable it?
I was repeatedly trying to Find my iPhone when it came up with "Location Services Disabled".
Later I was able to find my iPhone again. This has happend severally times lately?
Cold this happen automatically, like a "time out" function?

Similar Messages

App asks to have location services turned on but App does not appear in location list.

I start the EZ Word Cheats and it starts with the menu open. I click on Quick Import and a blue box appears with the message to turn on Location services in settings. I start the settings app, click Privacy, click Location Services, but EZ Word Cheats does not appear in the list of Apps that can have Location Services turn on. Shutting the iPad off or resetting it does not help.

I reset location services in Setting>General>Reset>Reset Location & Privacy and that fixed the problem. I need not need to restore from new. When I ran EZ Word Cheats after the resetting location services and then clicked on the Quick import under the menu, a message came up asking access to Photos instead of location services. This is the correct behavior since the program does need access to my photos but does not need Location services.

Odisrv services getting down automatically

odisrv services getting down automatically even though I have started services manually.
Please suggest

Please refer to the piece of log:
2012-01-06 04:11:03,543 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2012-01-06 04:11:03,543 INFO [main] CSS Log file will be generated at E:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2012-01-06 04:11:03,558 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2012-01-06 04:11:03,558 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2012-01-06 04:11:03,590 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2012-01-06 04:11:05,777 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2012-01-06 04:11:06,324 INFO [main] Got hub location from Registry:http://US1SAWN00077.wmservice.corpnet1.com:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2012-01-06 04:11:06,527 INFO [main] Got native directory location from Registry:US1SAWN00077.wmservice.corpnet1.com:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2012-01-06 04:11:06,527 INFO [main] URL constructed out of values in Registry database:ldap://US1SAWN00077.wmservice.corpnet1.com:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)

My iPad got stolen and it is offline on find iPhone, is there a way I can locate it get it back or even get the serial number of it

My iPad got stolen and it is offline on find iPhone, is there a way I can locate it get it back or even get the serial number of it? I'm really mad and sad about that.

The only to potentially find is if you can do so via Find My iPhone - which will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
If you haven't already done so then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc, and if it's a cellular model then contact your carrier.
In terms of the serial number, if you have a backup of the iPad on your computer's iTunes then you should be able to go into Edit > Preferences (iTunes > Preferences if on a Mac), select the Devices tab on that, and then hover your mouse pointer of the iPad's backup : http://support.apple.com/kb/HT4061
If the iPad was registered to your iTunes account you might also be able to get it from your support profile : https://supportprofile.apple.com/

HT1975 can location services be used to locate a lost or stolen ipod?

can location services be used to locate a lost or stolen ipod?

Shoaiballi you are dead wrong
From the Users Guide:
Find My iPod
Find My iPod helps you locate your iPod touch using the free Find My iPhone app on
another iPhone, iPad, or iPod touch, or using a Mac or PC with a web browser signed in to
www.icloud.com or www.me.com. Find My iPod includes:
ÂÂLocate iPod touch on a map: View the approximate location of your iPod touch on a
full-screen map.
ÂÂDisplay a Message or Play a Sound: Lets you compose a message that will appear on your iPod touch screen, or play a sound at full volume for two minutes.
ÂÂRemote Passcode Lock: Lets you remotely lock your iPod touch and create a 4-digit passcode, if you haven’t set one previously.
ÂÂRemote Wipe: Lets you protect your privacy by erasing all media and data on iPod touch, restoring it to factory settings.
Important: Find My iPod must be turned on in either iCloud or MobileMe settings on your iPod touch. Find My iPod can be turned on only in one account.
Turn on Find My iPod using iCloud
Go to Settings > iCloud and turn on Find My iPod.
Turn on Find My iPod using MobileMe
Go to Settings > Mail, Contacts, Calendars, tap your MobileMe account,
then turn on Find My iPod.
Find My iPod uses Wi-Fi to locate your iPod touch. If Wi-Fi is turned off or if your iPod touch isn’t connected to a Wi-Fi network, Find My iPod can’t find it.
See “iCloud” on page 16 or “Setting up mail and other accounts” on page 15.
The only downside is that the wifi has to be on and connected

Yosemite notifications (weather) not working. Every time I go to security/privacy preferences and allow location services/weather, it automatically unchecks that preference when I restart my imac

My Yosemite notifications (weather) is not working. Every time I go to security/privacy preferences and allow (put a check in the box) location services/weather, it automatically unchecks that preference when I restart my imac

Hi Blotontheland,
Thanks for the prompt reply. The interesting thing is that my Macbook Pro was upgraded today to Yosemite and I still have the spinning wheel on the start up screen before the login page comes up.

Location Services Getting Used A Lot

I recently went into my Location Services setting and noticed the "System Services". It looks like these are the items that use Location Services other than the apps that a user downloads. I turned on the option that allows me to see when the System Services are using Location Services and now I notice that theyre using my location a lot.
I saw the location icon on one time while texting and noticed that it wasn't turning off. I went in to check what was using it and it turned out to be Traffic and Frequent Locations.
Is this normal? Are Location Services actually being used a lot? I'm guessing this is why there's an option whether or not you want to see when the System Services are using your location.
The main reason I'm wondering is because I want to save my battery as much as possible...

Yes; just use the maps app (or google maps). Drop a pin at the starting point, then later you can request directions to that pin. Be sure to switch to walking directions.
But you should also have a backup plan, as you would with any activity in a risky environment. Like taking sightings on recognizable landmarks or using other survival techniques that you have probably taken classes in. You need to be prepared for a dead battery, dropping the phone, getting it wet, etc.

SOA composites deployed in weblogic service gets triggered automatically

Hi All,
Am facing a strange behaviour in weblogic server.
Certain SOA composites deployed in weblogic server(10.3.5.0) gets triggered automatically in the midnight at 1.00 p.m and they are in running state for more than 4 hours and then the process gets faulted .
can you please let me know, is there any timer set in weblogic server .

Hi,
Yes there is.
Faulted composites might be triggered automatically and try to complete.
To stop this behevior:
Go to EM home ->Right click on soa-infra -> Soa Administration -> BPEL Properties -> More BPEL Configuration Properties -> Click on "RecoveryConfig" -> Change "maxMessageRaiseSize" to 0.
This "RecoveryConfig" property holds the responsible for the Automatic Recovery
Arik

Location Services: Setting Time Zone... Always Active

Just wondering if anybody else is experiencing the always active SETTING TIME ZONE setting in LOCATION SERVICES / SYSTEM SERVICES.
It's always purple - never stops polling for location.
I've noticed a change in the battery life for my iPhone 4 and I think this is the culprit.
Is that setting needed for anything in particular or can it safely be turned off?
Thanks for any advice you have!

Grrrrrr, now (after the iOS 5.0.1 update), this is happening not only on my iPad, but also on my iPhone 4S, which never had the problem on iOS 5.0. So, instead of going from 1 to 0 devices having the problem, I've gone from 1 to 2 after the update! Isn't this the opposite of what was supposed to happen?
Letting the iPhone sleep for a while, shutting it off and turning it back on, resetting it with home+power, all do nothing. Weirdly, it *wasn't* doing this right after I did the update; it only started about a day or so later.
****Update: and now it's off again, but it did come on for about 10 minutes and then turned off again. Hmmmmm. I agree that having the status bar icon enabled is a good idea, to at least be able to see when this happens and disable it if you're in a situation where battery life matters.

I have a G5 and bought and upgraded to osx 10.5. now i need to upgrade to 10.5.6 or higher, but when i download and try to install, i get message "this volume does not meet requirements for this update".

i am trying to sync an ipad to a power mac g5. i bought and upgraded to osx 10.5 and have tried to download and 10.5.6 or higher, but i keep getting same message: "you cannot install mac os x update on this volume. this volume does not meet requirements for this update". help!

Mac OS X 10.5.8 Combo Update
Java for Mac OS X 10.5 Update 5
To me, in all such updates, goes without saying maybe: backup, repair permissions, repair your drive (Disk Warrior does more reliable and thorough job, and it comes out to pennies if you don't wait until needed). Clone your system so you can restore or use the backup - just in case.
I'd even do a fresh format after your clone is done and do a full OS clean install and update, and then a quick import from Setup Assistant.
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.2 or later recommended
(free download from www.itunes.com/download)
iTunes Store account
Internet access
I'm going to assume there is something with the partitions on the drive, partition table most likely, though I know I've seen others with that error message - doesn't really point to cause, rarely does (make sure latest firmware update etc is sometimes included but again, we know that isn't why).

If you are using a screen reader and having problems using Mail, it might help to disable automatic page updates. Please note, this will also disable chat and text messaging within Yahoo! Mail.This problem has resurfaced from previous versions of Firefox.

I get a terrible display in ATT Yahoo!

I have this same problem and it occurs with other websites (like ESPN.com) too. Only I don't get the option of disabling automatic page updates on other websites. I disabled and reinstalled Mozilla and it went away for a short while. About two weeks later the same problem popped back up.

Issue with Planning service getting crashed Automatically due to dll file

Hello,
I am having an issue with the Hyperion Planning service which is getting crashed and the following is noted in the Eventviewer:
Faulting application name: HyS9Planning.exe, version: 1.0.0.2, time stamp: 0x4d110efc
Faulting module name: jrosal.dll, version: 0.0.0.0, time stamp: 0x4e8c8104
Exception code: 0x40000015
Fault offset: 0x000000000000cb0b
Faulting process id: 0x1960
Faulting application start time: 0x01ce14f7a8434b04
Faulting application path: D:\Oracle\Middleware\user_projects\domains\EPMSystem\bin\HyS9Planning.exe
Faulting module path: D:\Oracle\Middleware\jrockit_160_29\jre\bin\jrosal.dll
Report Id: 967733e6-8152-11e2-9257-5cf3fc335086The following is recorded in the log file:
<Mar 2, 2013 2:45:22 PM CST>
<Error> <HTTP> <BEA-101017> <[ServletContext@271625046[app:PLANNING module:HyperionPlanning path:/HyperionPlanning spec-version:2.5 version:11.1.2.0]]
Root cause of ServletException.
java.lang.OutOfMemoryError: classblock allocation, 11312928 loaded, 11M footprint, in check_alloc (src/jvm/model/classload/classalloc.c:215).
Attempting to allocate 2G bytes
There is insufficient native memory for the Java
Runtime Environment to continue.
Possible reasons:
The system is out of physical RAM or swap space
In 32 bit mode, the process size limit was hit
Possible solutions:
Reduce memory load on the system
Increase physical memory or swap space
Check if swap backing store is full
Use 64 bit Java on a 64 bit OS
Decrease Java heap size (-Xmx/-Xms)
Decrease number of Java threads
Decrease Java thread stack sizes (-Xss)
Disable compressed references (-XXcompressedRefs=false)
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClassCond(ClassLoader.java:631)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:615)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
     at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:343)
     Truncated. see log file for complete stacktraceI checked the following forum
Re: Oracle JRockit R28.2.2. OutOfMemoryError: classblock allocation
Should I need to increase -XX:MaxClassBlockMemory to 75M. If so, how should I do it, I am unaware of how I can set the values? My Planning server has 136GB Ram and 18 Cores.
Thanks,
hyperionEPM

The issue was related to the heap size being too much and as a result the Class block memory was not getting enough memory. I think we can make a use of -XXCompressedRefs:32 parameter in the Java start up to allow the heap size to increase till 32 Gb.

Firefox is caching old passwords and I can't even get on certain sites now. Even though I have that disabled.

Help!

If you have turned off Firefox's password manager feature, then the next thing to try would be to delete cookies for the problem sites.
While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Tools menu > Page Info > Security > "View Cookies"
* click the padlock or globe icon in the address bar > More Information > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page and logging in from scratch. Does that help?

Can Flash Builder actually make native mobile apps as advertised? Or does it always require AIR?

I'm developing mobile applications on AIR with FlashDevelop. It's a very nice platform to develop on, but AIR is a whopping huge download for mobile, especially over an expensive 3G connection. I'm worried about driving away potential customers with that and I'd love to find something that builds native apps instead. So I was very excited when I went to the Flash Builder page and read:
"Build uncompromised native applications for iOS, Android, and Blackberry Tablet OS..."
However, when I started looking at the documentation, everything always seems to still be based on AIR. And AIR apps are definitively not native.
Does anyone know if I've just missed something and Flash Builder really is able to build native apps? Or is Adobe just blowing smoke and redefining words?
Thanks!

I don't see what the problem with running on a virtual machine would be. Most Android apps run on a virtual machine. Or isn't Dalvik a virtual machine?
However, this is true for Android and not for iOS. On Android, your application is compiled to bytecode and then run on a virtual machine. This has the advantage of allowing you app size to be smaller, since users can download the AIR runtime separately and share it among different apps.
On iOS, it is compiled to machine language. Otherwise, Apple would not allow its distribution on the app store.
Some features are tailored for a specific environment (for example, text input controls). Some features are available on some environments and not on others, and the runtime provides functions to determine whether they are available or not.

Unable to copy mp3 file to slideshow in Photoshop Elements 6. Get error message system does not have required compresser/ decompresser codec installed. How do I fix this?

I run windows 7 on my PC and keep getting above error message when I try to copy an mp3 file to the slideshow I'm creating!
How do I fix this?

I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key.

Can location services get disabled automatically? Or does it always require a user to disable it?

Similar Messages

Maybe you are looking for