Can log into Yosemite server (4.0) VPN service with a Mavericks client, but not Yosemite client

Question

Sever Info:
Yosemite Server 4.0 running on a late 2009 Mac Mini with 8 GB RAM with vpnd service enabled
The server was upgraded to Yosemite - not clean install - this may not matter (see below)
Airport extreme router with standard VPN UDP ports for L2TP forwarded to server (500, 1701, 4500)
Client info:
MB Air 13" early 2014 with 8 GB RAM
Yosemite
Mavericks 10.9.5 running as a Parallels virtual machine (don't ask - I need it to run an app for work that is not yet compatible with Yosemite)
OD service is NOT running - no VPN connections ever occurred from ANY client with this service running - OD is not needed in my case fortunately
With the OD service off, I can connect via the Mavericks virtual machine just fine, but not with Yosemite. With Yosemite, the ppp connection appears to occur, but server config requests appear to fall on deaf ears (client side doesn't appear to respond) until the connection times out. Can't figure out what triggers the client response to a server config request. Client side complains about no route to host and IP addresses don't get assigned to the connection.
The connection happens successfully in an eyeblink with the Mavericks client. Same username/password/shared secret in both instances.
Tried a generated .vpnconfig from the server, this also did not work.
It's possible that it is an auth problem, but can't figure out how the process occurs or what may be going wrong. There does not seem to be an obvious way to increase the granularity of the logging such that it might give other hints - at least that I can find. I found plenty of references to VPN issues when people upgraded from Mountain Lion to Mavericks as well as work arounds for this. I tried the most promising looking of those - no love. I reverted everything back to stock install since I could at least connect with Mavericks.
If log entries would be helpful, they are included below. I've stared at them long enough - perhaps a new set of eyes can provide a hint.
In addition, I can find no documentation regarding the VPN service in Yosemite server so as to get a clue as to whether there have been changes in racoon since Mavericks.
Thanks in advance for any suggestions. I would be glad to supply any other info needed for an accurate diagnosis .
Pat
==
Regarding the Yosemite client connection in the Yosemite server VPN Service log:
2014-10-21 12:18:30 MDT
Incoming call... Address given to client = 192.168.1.228
Tue Oct 21 12:18:30 2014 : Directory Services Authentication plugin initialized
Tue Oct 21 12:18:30 2014 : Directory Services Authorization plugin initialized
Tue Oct 21 12:18:30 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:18:30 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:18:30 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:18:30 2014 : L2TP incoming call in progress from 'my.dotted.quad.address'...
Tue Oct 21 12:18:30 2014 : L2TP received SCCRQ
Tue Oct 21 12:18:30 2014 : L2TP sent SCCRP
Tue Oct 21 12:18:30 2014 : L2TP received SCCCN
Tue Oct 21 12:18:30 2014 : L2TP received ICRQ
Tue Oct 21 12:18:30 2014 : L2TP sent ICRP
Tue Oct 21 12:18:30 2014 : L2TP received ICCN
Tue Oct 21 12:18:30 2014 : L2TP connection established.
Tue Oct 21 12:18:30 2014 : using link 0
Tue Oct 21 12:18:30 2014 : Using interface ppp0
Tue Oct 21 12:18:30 2014 : Connect: ppp0 <--> socket[34:18]
Tue Oct 21 12:18:30 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:33 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:36 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:39 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:42 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:45 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:48 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:51 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:54 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:57 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:19:00 2014 : LCP: timeout sending Config-Requests
Tue Oct 21 12:19:00 2014 : Connection terminated.
Tue Oct 21 12:19:00 2014 : L2TP disconnecting...
Tue Oct 21 12:19:00 2014 : L2TP sent CDN
Tue Oct 21 12:19:00 2014 : L2TP sent StopCCN
Tue Oct 21 12:19:00 2014 : L2TP disconnected
2014-10-21 12:19:00 MDT
   --> Client with address = 192.168.1.228 has hungup
==
Client side log for this connection using the Yosemite client:
Tue Oct 21 14:32:08 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 14:32:08 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 14:32:08 2014 : L2TP connecting to server 'myserver.com' (my.dotted.quad.address)...
Tue Oct 21 14:32:08 2014 : IPSec connection started
Tue Oct 21 14:32:09 2014 : IPSec connection established
Tue Oct 21 14:32:10 2014 : L2TP connection established.
Tue Oct 21 14:32:10 2014 : L2TP set port-mapping for en0, interface: 4, protocol: 0, privatePort: 0
Tue Oct 21 14:32:10 2014 : Using interface ppp0
Tue Oct 21 14:32:10 2014 : Connect: ppp0 <--> socket[34:18]
Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0, interfaceIndex: 0, Protocol: None, Private Port: 0, Public Address: 3fe4b3e8, Public Port: 0, TTL: 0.
Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0 inconsistent. is Connected: 1, Previous interface: 4, Current interface 0
Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0 initialized. is Connected: 1, Previous publicAddress: (0), Current publicAddress 3fe4b3e8
Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0 fully initialized. Flagging up
Tue Oct 21 14:32:25 2014 : write: No route to host
Tue Oct 21 14:32:25 2014 : write: Host is down
Tue Oct 21 14:32:28 2014 : write: Host is down
Tue Oct 21 14:32:28 2014 : write: Host is down
Tue Oct 21 14:32:31 2014 : write: Host is down
Tue Oct 21 14:32:31 2014 : write: Host is down
Tue Oct 21 14:32:34 2014 : write: Host is down
Tue Oct 21 14:32:34 2014 : write: Host is down
Tue Oct 21 14:32:37 2014 : write: Host is down
Tue Oct 21 14:32:37 2014 : write: Host is down
Tue Oct 21 14:32:40 2014 : LCP: timeout sending Config-Requests
Tue Oct 21 14:32:40 2014 : Connection terminated.
Tue Oct 21 14:32:40 2014 : L2TP disconnecting...
Tue Oct 21 14:32:40 2014 : L2TP error sending CDN (Host is down)
Tue Oct 21 14:32:40 2014 : L2TP clearing port-mapping for en0
Tue Oct 21 14:32:40 2014 : L2TP disconnected
==
Pertinent client side log for connection of Mavericks client to Yosemite server:
Tue Oct 21 13:29:13 2014 : Connect: ppp0 <--> socket[34:18]
Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0, interfaceIndex: 0, Protocol: None, Private Port: 0, Public Address: 3fe4b3e8, Public Port: 0, TTL: 0.
Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0 inconsistent. is Connected: 1, Previous interface: 4, Current interface 0
Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0 initialized. is Connected: 1, Previous publicAddress: (0), Current publicAddress 3fe4b3e8
Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0 fully initialized. Flagging up
Tue Oct 21 13:29:21 2014 : local  IP address 192.168.1.229
Tue Oct 21 13:29:21 2014 : remote IP address 192.168.1.2
Tue Oct 21 13:29:21 2014 : primary   DNS address 192.168.1.2
Tue Oct 21 13:29:21 2014 : secondary DNS address 8.8.8.8
Tue Oct 21 13:29:21 2014 : l2tp_wait_input: Address added. previous interface setting (name: en0, address: 10.0.1.38), current interface setting (name: ppp0, family: PPP, address: 192.168.1.229, subnet: 255.255.255.0, destination: 192.168.1.2).
Tue Oct 21 13:29:21 2014 : Committed PPP store
Tue Oct 21 13:29:21 2014 : Committed PPP store
Tue Oct 21 13:52:32 2014 : [DISCONNECT]
Tue Oct 21 13:52:32 2014 : Hangup (SIGHUP)
Tue Oct 21 13:52:32 2014 : Connection terminated.
Tue Oct 21 13:52:32 2014 : Connect time 23.4 minutes.
Tue Oct 21 13:52:32 2014 : Sent 2674664 bytes, received 10680854 bytes.
Tue Oct 21 13:52:32 2014 : L2TP disconnecting...
Tue Oct 21 13:52:32 2014 : L2TP clearing port-mapping for en0
Tue Oct 21 13:52:32 2014 : L2TP disconnected
==
Regarding the Mavericks client connection in the Yosemite server VPN Service log:
2014-10-21 12:09:48 MDT Incoming call... Address given to client = 192.168.1.226
Tue Oct 21 12:09:48 2014 : Directory Services Authentication plugin initialized
Tue Oct 21 12:09:48 2014 : Directory Services Authorization plugin initialized
Tue Oct 21 12:09:48 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:09:48 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:09:48 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:09:48 2014 : L2TP incoming call in progress from ‘my.dotted.quad.address’…
Tue Oct 21 12:09:48 2014 : L2TP received SCCRQ
Tue Oct 21 12:09:48 2014 : L2TP sent SCCRP
Tue Oct 21 12:09:48 2014 : L2TP received SCCCN
Tue Oct 21 12:09:48 2014 : L2TP received ICRQ
Tue Oct 21 12:09:48 2014 : L2TP sent ICRP
Tue Oct 21 12:09:49 2014 : L2TP received ICCN
Tue Oct 21 12:09:49 2014 : L2TP connection established.
Tue Oct 21 12:09:49 2014 : using link 0
Tue Oct 21 12:09:49 2014 : Using interface ppp0
Tue Oct 21 12:09:49 2014 : Connect: ppp0 <--> socket[34:18]
Tue Oct 21 12:09:49 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x4bc40d9f> <pcomp> <accomp>]
Tue Oct 21 12:09:49 2014 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x71598937> <pcomp> <accomp>]
Tue Oct 21 12:09:49 2014 : lcp_reqci: returning CONFACK.
Tue Oct 21 12:09:49 2014 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x71598937> <pcomp> <accomp>]
Tue Oct 21 12:09:49 2014 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x4bc40d9f> <pcomp> <accomp>]
Tue Oct 21 12:09:49 2014 : sent [LCP EchoReq id=0x0 magic=0x4bc40d9f]
Tue Oct 21 12:09:49 2014 : sent [CHAP Challenge id=0x73 <074a110a5e0620296b1937345c34090e>, name = “myserver.private”]
Tue Oct 21 12:09:49 2014 : rcvd [LCP EchoReq id=0x0 magic=0x71598937]
Tue Oct 21 12:09:49 2014 : sent [LCP EchoRep id=0x0 magic=0x4bc40d9f]
Tue Oct 21 12:09:49 2014 : rcvd [LCP EchoRep id=0x0 magic=0x71598937]
Tue Oct 21 12:09:49 2014 : rcvd [CHAP Response id=0x73 <dfed1e41e1fb8c1132387c3d7792b1880000000000000000b2b163259cbe410aae792093680ba7 a89da3b46737c0d8d200>, name = "somelocaluser"]
Tue Oct 21 12:09:54 2014 : sent [CHAP Success id=0x73 "S=00EDB07933CE697641E2263A2A76386389512329 M=Access granted"]
Tue Oct 21 12:09:54 2014 : CHAP peer authentication succeeded for somelocaluser
Tue Oct 21 12:09:54 2014 : DSAccessControl plugin: User 'somelocaluser' authorized for access
Tue Oct 21 12:09:54 2014 : sent [IPCP ConfReq id=0x1 <addr 192.168.1.2>]
Tue Oct 21 12:09:54 2014 : sent [ACSCP ConfReq id=0x1]
Tue Oct 21 12:09:54 2014 : rcvd [CHAP Response id=0x73 <dfed1e41e1fb8c1132387c3d7792b1880000000000000000b2b163259cbe410aae792093680ba7 a89da3b46737c0d8d200>, name = "somelocaluser"]
Tue Oct 21 12:09:54 2014 : sent [CHAP Success id=0x73 "S=00EDB07933CE697641E2263A2A76386389512329 M=Access granted"]
Tue Oct 21 12:09:54 2014 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Tue Oct 21 12:09:54 2014 : ipcp: returning Configure-NAK
Tue Oct 21 12:09:54 2014 : sent [IPCP ConfNak id=0x1 <addr 192.168.1.226> <ms-dns1 192.168.1.2> <ms-dns3 8.8.8.8>]
Tue Oct 21 12:09:54 2014 : rcvd [IPV6CP ConfReq id=0x1 <addr fe80::021c:42ff:febf:bf66>]
Tue Oct 21 12:09:54 2014 : Unsupported protocol 0x8057 received
Tue Oct 21 12:09:54 2014 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 1c 42 ff fe bf bf 66]
Tue Oct 21 12:09:54 2014 : rcvd [ACSCP ConfReq id=0x1 <route vers 16777216> <domain vers 16777216>]
Tue Oct 21 12:09:54 2014 : sent [ACSCP ConfRej id=0x1 <route vers 16777216>]
Tue Oct 21 12:09:54 2014 : rcvd [IPCP ConfAck id=0x1 <addr 192.168.1.2>]
Tue Oct 21 12:09:54 2014 : rcvd [ACSCP ConfAck id=0x1]
Tue Oct 21 12:09:54 2014 : rcvd [IPCP ConfReq id=0x2 <addr 192.168.1.226> <ms-dns1 192.168.1.2> <ms-dns3 8.8.8.8>]
Tue Oct 21 12:09:54 2014 : ipcp: returning Configure-ACK
Tue Oct 21 12:09:54 2014 : sent [IPCP ConfAck id=0x2 <addr 192.168.1.226> <ms-dns1 192.168.1.2> <ms-dns3 8.8.8.8>]
Tue Oct 21 12:09:54 2014 : ipcp: up
Tue Oct 21 12:09:54 2014 : found interface en0 for proxy arp
Tue Oct 21 12:09:54 2014 : local  IP address 192.168.1.2
Tue Oct 21 12:09:54 2014 : remote IP address 192.168.1.226
Tue Oct 21 12:09:54 2014 : Received acsp/dhcp dictionaries
Tue Oct 21 12:09:54 2014 : Received acsp/dhcp dictionaries
Tue Oct 21 12:09:54 2014 : l2tp_wait_input: Address added. previous interface setting (name: en0, address: 192.168.1.2), current interface setting (name: ppp0, family: PPP, address: 192.168.1.2, subnet: 255.255.255.0, destination: 192.168.1.226).
Tue Oct 21 12:09:54 2014 : rcvd [ACSCP ConfReq id=0x2 <domain vers 16777216>]
Tue Oct 21 12:09:54 2014 : sent [ACSCP ConfAck id=0x2 <domain vers 16777216>]
Tue Oct 21 12:09:54 2014 : Received protocol dictionaries
Tue Oct 21 12:09:54 2014 : Committed PPP store
Tue Oct 21 12:09:54 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:09:54 2014 : rcvd [IP data <src addr 192.168.1.226> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
Tue Oct 21 12:09:54 2014 : sent [IP data <src addr 192.168.1.2> <dst addr 192.168.1.226> <BOOTP Reply> <type ACK> <server id 0xc0a80102> <domain name "local">]
Tue Oct 21 12:09:57 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:10:00 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:10:03 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:10:06 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:10:09 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:10:09 2014 : rcvd [LCP TermReq id=0x2 "User request"]
Tue Oct 21 12:10:09 2014 : LCP terminated by peer (User request)
Tue Oct 21 12:10:09 2014 : ipcp: down
Tue Oct 21 12:10:09 2014 : sent [LCP TermAck id=0x2]
Tue Oct 21 12:10:09 2014 : l2tp_wait_input: Address deleted. previous interface setting (name: en0, address: 192.168.1.2), deleted interface setting (name: ppp0, family: PPP, address: 192.168.1.2, subnet: 255.255.255.0, destination: 192.168.1.226).
Tue Oct 21 12:10:09 2014 : L2TP received CDN
Tue Oct 21 12:10:09 2014 : Connection terminated.
Tue Oct 21 12:10:09 2014 : Connect time 0.4 minutes.
Tue Oct 21 12:10:09 2014 : Sent 1003 bytes, received 646 bytes.
Tue Oct 21 12:10:09 2014 : L2TP disconnecting...
Tue Oct 21 12:10:09 2014 : L2TP disconnected
2014-10-21 12:10:09 MDT   --> Client with address = 192.168.1.226 has hungup

Answer 1

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.