Can Lookout 6.7 open, allow editing, and then save programs written in previous versions of Lookout like 4.2 or 5.1?

I have several control stations provided by a 3rd party that need some tweaks made to them, however if I purchase Lookout, I will receive a much later version than they were originally written in. I do not want to change the OS the stations are using so would like to save the applications in their original version. Is this possible?
Thanks! Barney Rubble

Contact NI directly, they may be able to help.
If not I can get you the Install for Lookout 5.1 relatively easily. It will run in eval and may be enough to get you in to make some changes. I do not have 4.5 or older.
Forshock - Consult.Develop.Solve.

Similar Messages

Sharing stopped. Sharing set to allow editing and viewing. He can see what I enter. I can't see his entries.

Sharing set to allow editing and viewing. He can see what I enter. I can't see his entries. He sees his entries plus mine. I only see mine. This all worked fine a week ago.

I'm sorry to be so incredibly dense. The article to which you linked says:
"If the computer is already authorized, the item plays. If the computer has not yet been authorized, iTunes asks you to enter the Apple ID and password you used to purchase the song."
I can play songs from my husband's library. I can't drag them into my library.
If deauthorizing/authorizing is the solution, who needs to do what? We've got three computers and two iTunes accounts.

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off). Have you previously been saving PSD files?
IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on. The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list. So long as the file does not have parameters that your chosen format does not support, then this should work for you.
[EDIT] Just noticed that you did include 'Crop' in the subject line. Do you have 'Delete cropped pixels' checked?

How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn- the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign.

How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn-off the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign but in this version I could not do so and my iPad appears slower.

Close inactive apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen

My iMovie is skipping like crazy when I try to edit and then goes to a black screen and you can only hear the audio!?!? What's happening??

I use iMovie almost everyday for Youtube videos. I have nothing in my imovie except the 5 clips that I'm editing now. I have all my media on an external hard drive and delete everything after I'm done with ( I empty all trash cans). My iMovie is now skipping when I try to edit and then the clips just go to a black screen and I can only hear the audio, this has been going on for a week and I don't know what to do?!? Any help?

Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller
-- Those links are currently down for maintenance but should available shortly.

Just upgraded to Maverick and can't get my opening page to stay on GOOGLE. it keeps opening in SITES and then I have to click on GOOGLE.

I just upgraded to Mavericks and can't get my opening page to stay on GOOGLE. IT keeps opening in SITES and then I have to click on GOOGLE to begin searching. I would rather not hav to go through 2 steps to start everytime. I entered google's address in preferences but it ignores my preference.

You don't say which browser you are using so I will assume it's Safari. If so then open Safari - Preferences - General tab and look for where you set the home page, just set it to www.Google.com
If this fails for some reason then open Safari and reset it (look in the Safari menu) and choose all options for the reset. The re-try setting the preference. Post back with your results.

Can convert my files to a lower quality to edit, and then render it to get the full original HD?

I have Adobe Media Converter (obvisiouly) and I need to find a way where I can lower the quality in the clips to make it really smooth to edit, and then render it in the original full HD.

The better option is to update your computer hardware.

Adobe not allowing edits and seems to continue searching for server

Currently running Adobe 10 on a PC and working with a document that is in collaboration with 2 other authors.
The issue I am currently having is that I wish to be able to open the Document, make the necessary edits (and or comments) then save the document. In trying this, in the upper right hand side of the toolbar, the green circle continues to spin and trying to access the server, nor am I able to make the changes to edit and/or save the document. Really feel in ruling out a server issue since it has been behaving this way for 2 weeks. It also keeps prompting me to sign into the document (which I have selected the option to stay "signed-in" and password is correct).
Is there a fix for this or what steps in troubleshooting should I try going forward.

From what you wrote it seems that you are trying to perform a shared review on a PDF rather than having an issue that is exclusive to Adobe Reader / PDF on the local machine.
You may find it useful to browse the Services @ Acrobat.com Forums at:
http://forums.adobe.com/community/acrobatdotcom
(particularly if you are using acrobat.com)
If WebDAV or a network server is involved you'd want to discuss the problem with whomever provides support for either.
Be well...

Can I edit with Smart Print the same way I could with Smartweb Printing and then save as PDF files.

With Vista basic and SmartWeb Printing you had the option to edit your pages and then to save or print them in the PDF format. This way you could customise various pages pages, save them to a file and then reopen the whole file to see if you wanted to make any further changes before printing the final copy.
sharjor

Steve M. wrote:
I installed the full suite of Canon printing, scanning, faxing and whatever else software they provide for this all-in-one.
Maybe you don't need that. I prefer using Apple's Image Capture for scanning.
Right now I am working on scanning documents into PDFs. The Canon software lets me create multipage PDFs which is something I've been wanting to do. My question is, is it best to scan images as JPEGs and then save them as a multipage PDF or is it best to scan into PDF directly (which the scanner seems to offer as well) and then save as a multipage PDF? I'm thinking in terms of the best optimization of file size vs. image quality and things like that.
Let the software do it for you. That will be fewer steps for you. Image-based PDFs are going to be large. There is no way around that. If they are too large, you can use Preview's Save As feature and play around with the Quartz Filter.
Is the scanner actually doing anything differently when scanning into JPEG vs. PDF? Or is the scanning all the same and it's just the saving of the file that is different?
Scans are scans. The JPEG file format is lossly and will look worse than other types. If you are scanning in photographs, the JPEGs will look good. If you are scanning in crisp text, JPEGS will have lots of artifacts and look bad.
In general what dpi setting is usually sufficient to use to scan a basic text document without taking up too much file space?
I pretty much always keep it at 300 unless I need something special or when the original is really small and I intend to blow it up.

InDesign CS 5.5 - Why am I getting an error message saying my files ( that I created in 5.5 ) can not be opened because they are created in CS6? Says I have to open in 6 and back save to 4.

Why am I getting an error message saying my files ( that I created in 5.5 ) can not be opened because they are created in CS6? Says I have to open in 6 and back save to 4.

Ask in the ID forum and provide at least some useful info like system specs, what's contained in the files, where they are stored...
Mylenium

Initiating an itouch as a gift: Want to confirm: Can I initiate w/ my itunes account and then instruct itunes recipient to open up their own itunes account?

Want to confirm: Can I initiate w/ my itunes account and then instruct itunes recipient to open up their own itunes account?

Assuming you mean a an iTunes store purchase such as music, video or apps, the recipient does not have to have an iTunes account. However, they have to be in the same country as the giver. See the: iTunes Cards and Codes>Gift Options on the following site:
http://www.apple.com/support/itunes/

Can I create a fillable pdf form and then export it for client use on my web site?

Can I create a fillable pdf form and then export it for client use on my web site? I need clients to be able to fill in the (registration) form on my site then submit it via email.

[discussion moved to Creating, Editing & Exporting PDFs forum]

I downloaded the 09 version without deleting the 0, and now I am having some problems : when I open a document, it opens with 09, and then when I try to re-open it with 08 it is not possible !

I downloaded the 09 version without deleting the 08 (didn't know), and now I am having some problems : when I open a document, it opens with 09, and then when I try to re-open it with 08 it is not possible ! I have a message saying tha "the fichier index xml is absent" (my computer is in French. I want to work with pages 08 until I get familiar with the 09 version. What shall I do ? What does this happen?

Once you open the files in the new version you can't open them in the old version. Pick one version to use (have to be 9 now as you already have converted files)

My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time -been

My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time.

I tried this, but no luck. I went to Previous System>Users. There is nothing inside the "Users" folder, so I hit a dead end.
I can find my new e-mails -- those that came in since I re-installed the system -- in my NEW system (which I did to see if I was correctly understanding the advice), by going to Users>Home>Library>Mail>POP account name>Inbox.
Let me add a new question: I am running PhotoShop C3. It opens OK, and I can use it, but when it opens I get this message: "One or more files for Adobe Application Support folder are missing. Please re-run the PhotoShop installer."
I don't like re-installing working programs if I can avoid it, because it always seems to lead to other issues. Any idea what files are missing, and where it/they might be in the Previous System folder?
thanks
Mike

Can I upgrade to OS X Lion, and then reformat my computer with the OS X CD?

Can I upgrade to OS X Lion, and then reformat my computer with the OS X CD? Because if I reformating my mac with the regualr OS X CD, would that erase the Lion? Since I just donwloading the Lion, and don't really have a CD for it.

If you install Lion then erase the drive that will erase Lion. To purchase and download Lion you must first install Snow Leopard 10.6.6 or later to access the App Store where you purchase and download the Lion installer. You might read this before:
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion.

Can Lookout 6.7 open, allow editing, and then save programs written in previous versions of Lookout like 4.2 or 5.1?

Similar Messages

Maybe you are looking for