Can LR 5.2 be configured to save edits to disk?

I would really like to be able to save edited photos to disk, i.e., overwrite the original. I know this is a breach of some universal law, but I would LOVE to be able to make changes in Develop mode in LR, then overwrite the original file on disk. In my opinion, if the photo in LR resides in a folder, then edits should overwrite the file in the folder. If the photo resides in a catalog, then only changes to the catalog image should be made.
Is there anyway to get LR 5.2 to overwrite photos in a folder with the edited version?
-Thanks

No. Lightroom is a parametric editor that never touches the original.
If you insist on burning your bridges you'll want a pixel editor like Photoshop or Elements.

Similar Messages

VDI in saved state however no configuration for save delay?

I have a 2012 R2 VDI collection (personal, unmanaged) that is not configured for Save Delay. However, I have many VDI that resort to a Saved State when not in use. Is this saved state an included feature of 2012 R2 and is that different than
the save delay?

Hi Jason,
Thank you for posting in Windows Server Forum.
Have you find any relevant log related to this issue on host and guest side?
When a user connects to the VM collection, RDS and Hyper-V should wake up the VM and restore it to a running state. Is this not happening in your collection?
To save resources, the VMs in a collection will not all be in a running state all the time unless the admin manually changes their state via the RDMS console.
(Quoted from this thread, by “dgeddes
[MSFT]”)
Apart from this, you can refer beneath articles.
1.Lab Ops 6 – Setup VDI in Windows Server 2012R2
2. Disable save state on virtual machines in Hyper-V
Hope it helps!
Thanks.
Dharmesh Solanki

Can multiple Powershell v4 DSC configuration objects be combined on a machine?

I'm working on configuring servers using Powershell Desired State Configuration (DSC). I have several different groups of IIS servers. The configuration for all of them is about 90% identical, but there are differences between the groups.
In order to follow good programming practices and re-use the common code, I attempted to use multiple configuration objects to configure the groups. There was one configuration object full of common configuration, and then each group had a configuration
object with group specific config. It looked something like this:
Configuration CommonConfiguration {
Node "IISServer1" {
#Common configuration settings go here, such as this one (to keep things brief, I'm only showing one setting... there would be many more):
WindowsFeature Role_Web_Server_IIS
Ensure = "Present"
Name = "Web-Server"
Configuration IISGroup1Configuration {
Node "IISServer1" {
#Configuration resources for group1 go here. Again, much shorter than real life.
WindowsFeature Feature_ASP_Dot_Net_4_5
Ensure = "Present"
Name = "Web-Asp-Net45"
To fully configure a server in my first group of IIS servers, I would need to use both these configuration objects by running them like this:
CommonConfiguration
IISGroup1Configuration
Start-DscConfiguration -Path ".\CommonConfiguration\"
Start-DscConfiguration -Path ".\IISGroup1Configuration\"
DSCConfiguration runs twice and starts two Powershell jobs, both of which seem to complete. But there is a problem, and I'm wondering if it is at all solvable.
Problem:
When I try to use other DSC cmdlets to control my server's configuration, such as Restore-DCSConfiguration or Get-DSCConfiguration, it only seems to work on what ever configuration object ran last. For example, Get-DSCConfiguration returns only the IISGroup1Configuration,
because that ran last. I've tried playing around with order, and whichever configuration I run last is what is returned. Similarly, if I were to try to keep my configuration enforced with restore-configuration, it's only going to work on IISGroup1Configuration,
because it ran last. This is an example of what I ran that returned only one of the configuration objects.
Get-DscConfiguration -CimSession "IISServer1"
The behavior I want is for the server to treat ever configuration block run on it as its configuration and return all of them. But since it doesn't, does this mean I have to have everything needed to configure a server in a single configuration block? For
example, if I wanted to use DSC to configure two groups of IIS servers, would I have to have the following?
Configuration Group1 {
Node "IISServer1" {
#---Common configuration, 90% the same---
#---Group 1 specifics----
Configuration Group2 {
Node "IISServer2" {
#---Common configuration copy pasted in, 90% the same---
#---Group 2 specifics----
If this is how I have to do things, and a node can have only one configuration block be its "configuration", then this is absolutely terrible from a code reuse perspective. If I have six groups of servers, and I want to edit some shared code, I'm
going to have to go into six groups of configuration objects and edit the same line six times. That leads to errors and makes a mess. Is there any way to avoid this, while have the server consider all configuration objects run against it to be part of
its configuration?

Hi AlgebraicMirror,
Sorry for the delay.
I am trying to involve someone familiar with this topic to further look at this issue.
There might be some time delay. Appreciate your patience.
If you have any feedback on our support,
please click here.
Best Regards,
Anna
TechNet Community Support

How can i print a network configuration page , i need the IP on a ph1510

how can i print a network configuration page , i need the IP on a ph1510

Hi,
What is the exact printer model?
If it is the HP Deskjet 1510, this is a USB printer and it does not offer any network capabilities.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How can I change my safari preferences to save a file rather than download

How can I change my safari preferences to save a file rather than it downloading

danieladorotiak wrote:
When I click on the 'save application file, it download's it and doesn't give me the option to save it.
I can't be sure, but what probably happens is that the page doesn't give you a link to a downloadable file, but a button which activates a script. There's nothing you can do about that, because you don't control the script.
it just downloads the transcripts not the document.
It sounds like the downloaded file does not open or execute as it's supposed to (which, for instance, would happen if what you downloaded was a Java application, but you didn't have Java installed).
If you are allowed to, give us the URL and we'll have a look. Also, you should add what version of Mac OS X and of Safari you are using, and you should correct your profile (which says "Mac Pro" -- this forum is for the MacBook Pro, which is a different computer from the Mac Pro).

I switched to singapore on the app store, so now i am trying to get back to the U.S app store and it is saying "You have a store credit balance;you must spend your balance before you can change stores" I am trying to save money. What do I do???

I switched to singapore on the app store, so now i am trying to get back to the U.S app store and it is saying "You have a store credit balance;you must spend your balance before you can change stores" I am trying to save money. What do I do???

Contact iTunes Support - http://apple.com/emea/support/itunes/contact.html - and ask them to clear your balance.

I am looking to get a new 13 inch mac book pro, what is the max RAM that I can install. I know configured from Apple is 8 GB, but can I put 16 GB after?

i am looking to get a new 13 inch mac book pro, what is the max RAM that I can install. I know configured from Apple is 8 GB, but can I put 16 GB after?

Yes, you can install 16GB in your new macbook pro.
Go here (OWC) and here (Crucial) to give you options on how much you want to spend.
Good luck.

Can anybody explain how to configure the Centralized contract in SRM 7

Hi All,
Can anybody explain how to configure the Centralized contract management in SRM 7 with ECC EHP4 ?what are all that need to be perform in PI system.
Thank you,
praveen

Hello,
PI will be required here. You can also refer the config guides maintained at the belwo mentioned location.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 -> Configuration Guides for SAP SRM 7.0
Best Regards,
Rahul

Can't get panels and preferences to save with MacBook Pro

I can not get panels and preferences to save using Illustrator CS6 on a MacBook Pro. When I close out of AI the settings/preferences don't stay. Please help.
Thank you
Dan

Have you tried rebuilding preferences?
Working in a new user account?
Workspaces are saved in your local user folder. If workspaces are not saved, this could be problems with either Illustrators preferences in general or your user account.

Recently updated Mac OS 10.5.8 to 10.6.8 and and can not open exisiting Illustrator5 files or save new files.

I recently updated my MacBook Pro OS from 10.5.8 to 10.6.8 and can not open existing Illustrator5 files or save new files can someone help?

I think you have a corrupted upgrade. Do you have a backup of your old system?
Here's what you should do for now:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Can't change connection in configuration of application module

I've trouble in changing a connection in a configuration of an application module.
To reproduce this do the following:
- create two or more connections (in my case: to different databases on different servers, one of them via JDBC-ODBC Bridge)
- create an empty BC4J project
- create an application module using one of the connections
- right click the am and select configurations
- in the configuration manager select the (default) configuration (usually AppModuleLocal)
- select "edit"
- in the "Connection Type" section select "JDBC URL"
- Change the Connection Name to point to a different connection
- close the connection manager
- repeat the steps from (*)
- repeat the steps from (*) once more
=> you'll be unable to change the connection back to the connection used first. You can change it in the configuration manager, but if you reopen the configuration manager you'll see the old connection again.

You can edit the bc4j.xcfg and change the connation name within the configuration. I will try to reproduce and fix this bug.
Thanks
Juan

I am using Windows 8.1. I have combined several pdf's, but I can't get the new file to save. Can someone help me?

I am using Windows 8.1. I have combined several pdf's, but I can't get the new file to save. Can someone help me?

In Adobe Acrobat use File > Save

How can a JMS adapter be configured in BPEL to consume messages from multiple queues ?

How can a JMS adapter be configured in BPEL to consume messages from multiple queues ?

If you want to use JMS with AQ as datastore then there is some configuration you need to do to enable this. This is outside SOA Suite per sa, e.g. no adapter required.
If you want to connect to the AQ direct then use the AQ adapter.
this blog may be of some help understand the configuration
http://biemond.blogspot.com/2008/01/oracle-jms-with-esb-and-bpel.html
cheers
James

Can no longer save edited photos. get messages - "Nothing was imported" "The file or folders selected to import did not contain supported file type.

Can someone help. I use Photoshop Elements 13. I can no longer save edited photos. get messages - "Nothing was imported" "The file or folders selected to import did not contain supported file type. It started this a couple of weeks ago and I had a friend come fix it just 2 days ago. It took him several hours and I lost all tags I had on over 10,000 pictures. Now it has done it again. I'm so upset. I lost a lot of stuff. I don't want to keep bothering him with this. Please Help.

How did you import the files to your computer?
What model number camera?

I bought a used macbook air, it didn't come with the flash drive to do a factory reset. Can I download the info needed and save it to my own flash drive and then do a factory reset? If not what can I do?

I bought a used macbook air, it didn't come with the flash drive to do a factory reset. Can I download the info needed and save it to my own flash drive and then do a factory reset? If not what can I do?

If it originally shipped with Mac OS X 10.6.8 or earlier, click here, phone Apple, and order a replacement.
If it originally shipped with Mac OS X 10.7 or newer, restart it with the Option, Command, and R keys held down.
(113079)

Can LR 5.2 be configured to save edits to disk?

Similar Messages

Maybe you are looking for