Can Mac OS X connect to multiple neteorks?

Hello
I'm having second thoughts about buying an AirPort Express... I have a Time Capsule 500GB and shares as a backup device and a wireless printer, but I want to share my 1TB Western Digital EHDD (External Hard Drive), and share music using AirTunes... So can a mac connect to the AirPort Express AND Time Capsule? So I can backup AND share my music?
Thanks!
Squabbi
Message was edited by: Squabbi

You aren't describing two networks, you are describing a single network with two devices on it (the AirPort Express and the Time Capsule). Yes, you can have both devices on the same network and use them at the same time.

Similar Messages

Can mac mini work connected to imac desktop

can mac mini work connected to imac desktop. I know its silly question but can i make the mac mini main operating system on my imac after transferring all of my itunes etc?

What is Target Display mode?
But only 27" iMac (Late 2009 or Mid 2010) can do this.
Since you mentioned an Early 2009 iMac I assume that it is a 24" iMac which sadly has not this capability.
If I am correct, you might wanna have a look at ScreenRecycler http://www.screenrecycler.com/ScreenRecycler.html
Stefan

Can one syclo server connect to multiple SAP backends?

Hi All,
I am working with SAP Service Manager application and the backend is SAP CRM.
As we all know that the backend system setting for syclo server needs to be maintained in the JavaBE.ini file
Suppose I have a requirement where one of my screen has to deal with a status update development and the backend in this case is ECC and not CRM.
Can I achieve this ? I mean can we configure the JavaBE.ini file to connect the multiple SAP backend ? If yes please explain the process/steps to do so.
Thanks and Regards
Neha Mahanty
Message was edited by: Michael Appleby

Thanks Bill,
As I understand , Going with Standard SAP Integration mechanism means to have connection with CRM system and ECC system can be called internally from CRM via RFC's . Is my understanding correct here ? This can be done If we create a FC in CRM and internally call ECC FC via RFC.
Also I shall try the second approach too. However I have a question here.
Suppose I create a new JavaBE2.ini file and configure it for ECC.
Later when I create java steps will it automatically detect that which SAP system it should connect to? I cannot explicitly tell the Java step to call the ECC system , Can I ?
Please advise.
Thanks
Neha

Can mac os x connect to Airport pre-logon?

Hi all,
I'm trying to get an iBook to connect to a wireless network pre-logon. Here's what's in place:
Windows 2003 domain (active directory based), mac XServe (10.4.2) 'managing' the mac clients on the network, in terms of security and all the rest of it.
The iBook is bound to the active directory domain, and all is working properly when the ethernet cable is plugged in, but we have a pretty big issue with airport.
I want to know whether i can set the iBook up so that it joins our wireless network when it boots up, so that active directory users can login to the laptop via wireless. I know that we can use 'mobile' accounts, but what about users that almost never logon to the iBook..
I want to get away from using mobile accounts.
I can save all the wireless information into Internet Connect (under a 802.1x connection), is there any way of accessing this when the computer boots up, so it automatically logs on to the wireless network, and then we have full network access? This MUST happen pre-logon.
if anyone has an ideas, please let me know!
David.

I'm trying to figure out the same thing.
OSX Client 10.3.9
Airport Extreme client adapter v400.17 (3.90.34.0.p11)
Airport utility is 4.2
AP is Cisco 1230AG, with Microsoft Win2003 Server IAS backend.
eapolclient - this is the 802.1x client.
I am able to connect manually after logon using EAP-TLS, by putting the CA cert in X509Anchors, and identity cert in System (private+public pair). eapolclient accesses the keychain successfully, and automatically logs on (without the password prompt).
But when I logout, or switch user, the connection drops. And a reboot doesn't connect either.
I also notice that the "eapolclient" process disappears in these cases.
Would this issue be related to the eapolclient running as a user space program at runtime, rather than being a "system" process run at boot time.
Anyone come across a reason for this? Fixes? Bugs identified.

One R/3 connected to Multiple BW

Hello,
Can one R/3 connect to multiple BW?
Will delta correctly function ?
Does one datasource will have multiple delta queue based on connections to BW ?
Pranay

Hello,
Sure, the system holds the delta queues per target system as the initialization is done based on different selections and for a specific BI System.
You can check this:
OSS note: 775568 - Two and more BW systems against one OLTP system.
Regards,
Jorge Diogo

I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

"I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! ":
That is correct.
"Why is this a problem and how can i repair it?"
Becasue this has never been a feature of iphone/ipod/ipad. There is nothing to repair.

Can't create Internet connection to My Mac Using USB

Hey All,
Recently i bought a new Mini Router Huawei 4G LTE E5732 Router, it was connected easily using WI-Fi to my Mac (MacBook Pro Retina, 13-inch, Late 2013)
installed the latest update OS X Yosemite 10.10.2, I tried to be connected through the USB port on the Mac using USB connection in the Network option on the System preferences, but i was surprised that there is no such a choice !!
Please can anyone help me, it is affecting my job !

It was solved, Thanks to the Apple customer service
They advice me to go to this link and it solved everything after updating the App version installed for the Mini Router on my Mac
http://consumer.huawei.com/en/mobile-broadband/mobile-wifi/support/downloads/e53 72-en.htm

I intend to purchase a Mac Mini and connect to a regular (not smart) flat screen TV and use such as monitor. Can this setup also allow access to Netflix or Apple movies or an Apple TV is also required?

I intend to purchase a Mac Mini and connect to a regular (not Smart) flat screen TV that will be as such a large monitor. With this setup do I require an additional Apple TV to watch programs from Netflix, Apple Store movies, Y-tube etc?

You can view NetFlix and YouTube via their websites on a Mac computer. You can purchase/play iTunes movies and other thing via iTunes on the Mac.

Can I use existing portal to connect to multiple R3 systems for config

I am planning to use existing portal 6.0 to connect to multiple R/3 systems for testing and configuration.
We have three portals in our landscape DEV TST and PRD.
Our R/3 system landscape -->DEV, DEV2, TST,TST2,TST3 etc.
DEV portal is connect to dev system TST portal to R/3 TST system etc.
Is there a way I can connect DEV portal to DEV2 R/3 System without effecting portal testing and configuration which is in progresses in DEV R/3 system.
If any one has done it in the past, please share instructions
Thanks,
adil

Hi Syed,
Check this link for creating systems.
Configuring EP for connecting to SAP R/3
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
Regards
Arun

Hi, I have tried to use FaceTime using both my Mac and iPhone, it showed it was connecting, but can't not be connected, and it will just show call failed. could you please look into it? thanks

Hi, I have tried to use FaceTime using both my Mac and iPhone, it showed it was connecting, but can't not be connected, and it will just show call failed. could you please look into it? thanks

There is an issue with facetime at the moment http://www.idownloadblog.com/2014/04/17/facetime-connectivity-issues-reaching-ma ny-ios-users/

I have just purchased the osx upgrade to 10.7 lion butb my mac is not connected to the internet. I have an apple id but it seems that i need my mac to be connected to the net to downolad the up grade. can i save the upgrade to my windows pc and transfer?

As I Said..I just wondered if it was possible to upgrade my software without having to connect my mac to the net..I have never connected it as a precaution against any nasties.It seems that i have been sent a password protected PDf with a link to the MAC APP Store..but you can only access the mac app store if you have a mac connected to the web. any ideas..?

Hi,
if connecting that specific Mac to the web is an issue, what you will need, anyway, is another Mac computer with OS X 10.6.8 so you can start the Mac App Store in order to download the Lion installer.
On that second computer, you can copy the Lion installer on a USB stick or other storage solution, and then copy the installer on the Mac-you-cannot-connect-to-the-internet .
You could even burn a Lion install DVD from the installer. More info about this here
Phil

How can Mac Pro (late 2013) create a WiFi network for Mac Books to connect to internet?

I am moving my Mac-Pro (late 2013) to a garden office. I have an ethernet cable to connect it to the house network. I also have a Mac Book Air which will only connect to a network by WiFi. I can use this Mac-Pro to create a WiFi network and the MacBook can talk to the Mac Pro over this WiFi network. But the Mac Book does not see the local network let alone the Internet, both of which are seen on the Mac Pro.
Is there a way that I can connect the created WiFi network to one of the two Ethernet cards in the Mac Pro?
Or what?
Tim

I have half cracked it.
For some reason the first step it to turn internet sharing off.
Then internet sharing can be configured and the wireless network set up and given a password.
Then, and then only, turn internet sharing back on and turn WiFi ON. All this is on the Mac-Pro (late 2013).
Now the Mac Air sees the new network and can log on and connect to the WAN internet locations, at least via Safari.
BUT if I use Finder on the Air, it will connect to the Mac Pro but it will not display what is on its disc. Though I can do screen sharing. Odd.
Also Air-Drop has stopped working, so there is no means of transferring files between the Pro and the Air.
I am going away now for a few days and will revisit this on my return.
Thanks for your help.

Hi does my ibook mac os v10.4 can be able to connect into wi-fi?

does my ibook mac os v10.4 can be able to connect into wi-fi?

All iBooks can connect to WiFi. Some have it built-in. Others need an added card. This article tells you which Macs have WiFi, and which ones need an Airport original card, and which need an Airport Extreme card:
http://docs.info.apple.com/article.html?artnum=106777
Note: if your iBook is only compatible with the original Airport card, it can only connect to the less secure 802.11b WEP connections, unless you add an ethernet WiFi bridge to their ethernet port with 802.11g or better.

HT4854 How can I load Mountain Lion to multiple Macs

How can I load Mountain Lion to multiple Macs without downloading the huge 4Gb file to each machine?

I've never done that, but I don't see why it wouldn't. There is no verification or authentication keys in the installer.
If you need 20+ licenses*, then you might take a look at the volume licensing: http://www.apple.com/mac/volume-licensing/
It describes the same process I described.
* I think 20 is the minimum. Not sure, though.

Mac's can not see or connect to network resources

Our company network is a windows network. We have a couple of remote users with Mac's. The Mac's connect to the network over a VPN. They can connect to the network through the VPN but can not see or connect to any network resources. What settings am I missing?

My problem is that once the VPN is established and I am on the network, none of the shares or resources are visible or able to be connected to.
VPN gets you connected to the network as if you were physically present in the office, but nothing more. Once you have successfully connected via VPN, you have to perform a seperate step to actually login to the server.
Also, some of the "it just works" aspects, like seeing all the things you can login to, before actually logging in to them, is a feature of Bonjour, which doesn't pass over VPN. You'll probably have to use the Finder Menu GO -> Connect to Server, and then type the server's IP address in manually.

Can Mac OS X connect to multiple neteorks?

Similar Messages

Maybe you are looking for