Can Mac read a dcr file made with win?

Hello,
Can Mac read a dcr file made with win?
Thanks in advance.

Thanks Sean,
I posted the question because of some problem of user to read the web page with dcr.
You assumed right, it is e dcr hosted in a browser page and viewed via shockwave with safari.
I don't know the nature of the problem but the user get an error.
Maybe I must decide to buy a mac and do some test.
Thank you again.

Similar Messages

How can I read a binary file stream with many data type, as with AcqKnowledge physio binary data file?

I would like to read in and write physiological data files which were saved by BioPac�s AcqKnowledge 3.8.1 software, in conjunction with their MP150 acquisition system. To start with, I�d like to write a converter from different physiodata file format into the AcqKnowledge binary file format for version 3.5 � 3.7 (including 3.7.3). It will allow us to read different file format into an analysis package which can only read in file written by AcqKnowledge version 3.5 � 3.7 (including 3.7.3).
I attempted to write a reader following the Application Note AS156 entitled �AcqKnowledge File Format for PC with Windows� (see http://biopac.com/AppNotes/ app156Fi
leFormat/FileFormat.htm ). Note the link for the Mac File format is very instructive too - it is presented in a different style and might make sense to some people with C library like look (http://biopac.com/AppNotes/ app155macffmt/macff.htm).
I guess the problem I had was that I could not manage to read all the different byte data stream with File.vi. This is easy in C but I did not get very far in LabView 7.0. Also, I was a little unsure which LabView data types correspond to int, char , short, long, double, byte, RGB and Rect. And, since it is for PC I am also assuming the data to be written as �little endian� integer, and thus I also used byte swap vi.
Two samples *.acq binary files are attach to this post to the list. Demo.acq is for version 3.7-3.7.2, while SCR_EKGtest1b.acq was recorded and saved with AcqKnowledge 3.8.1, which version number is 41.
I would be grateful if you someone could explain how to handle such binary file stream with LabView and send an example to i
llustrate it.
Many thanks in advance for your help.
Donat-Pierre
Attachments:
Demo.acq ‏248 KB
SCR_EKG_test1b.acq ‏97 KB

The reading of double is also straight forward : just use a dble float wired to the type cast node, after inverting the string (indian conversion).
See the attached example.
The measure of skin thickness is based on OCT (optical coherent tomography = interferometry) : an optical fiber system send and received light emitted to/back from the skin at a few centimeter distance. A profile of skin structure is then computed from the optical signal.
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Read_AK_time_info.vi.zip ‏9 KB

How can I read a binary file stream with many data type, as with AcqKnowledge physio binary data file?

I would like to read in and write physiological data which was saved by Biopac�s AcqKnowledge 3.8.1 software, in conjunction with their MP150 acquisition system. To start with, I�d like to write a converter from different physiodata file format into the AcqKnowledge binary file format for version 3.5 � 3.7 (including 3.7.3). It will allow us to read different file format into an analysis package which can only read in file written by AcqKnowledge version 3.5 � 3.7 (including 3.7.3).
I attempted to write a reader following the Application Note AS156 entitled �AcqKnowledge File Format for PC with Windows� (see http://biopac.com/AppNotes/app156FileFormat/FileFormat.h
tm ). Note the link for the Mac File format is very instructive too - it is presented in a different style and might make sense to some people with C library like look (http://biopac.com/AppNotes/app155macffmt/macff.htm) .
I guess the problem I had was that I could not manage to read all the different byte data stream with File.vi. This is easy in C but I did not get very far in LabView 7.0. Also, because it is for PC I am assuming the data to be written as �little endian� integer, and thus I also used byte swap vi.
I would be grateful if you someone could explain how to handle such binary file stream with LabView and send an example to illustrate it.
Many thanks in advance for your help.
Donat-Pierre

One more step...
short are U16 integer
double are double precision float
bool seem to be 2 bytes (= U16)
char are string (variable length)
rgb are U16 integer, with high order byte = 0
rect should be 4 x U16 (top, left, bottom, right)
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

How can I open an old file made with 2009 iWork'09?

Some years ago I prepared a book using iWork'09 program. Two months ago the hard disk of my iMac didn't work anymore. I did the backup of my work before the beracking. My iMac war repaired and I tried to open my old work with iWork'09 but the program doesn't function and I am not be able to open my old book. how can I solve this problem? Thanks for the reply.
gianfranco fromroma

What version of Pages do you have? Pages 5.2 can not open Pages '08 documents.
Can you reinstall iWork '09 from the original Installer or DVD?:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&sid=b30ce34087d5 fbeb2201a9ab44ca2402&mforum=iworktipsntrick
Peter

I can't open a 32-bit HDR file made with Photoshop HDR in Lightroom.

I can't open a 32-bit HDR file made with Photoshop HDR. I saved the file in Photoshop with the maximum compatibility-option on. In Lightroom the file doesn't show a preview and an exclamation mark in the upper right corner. Anybody an idea why and how to solve this problem?

As I said, the files must be saved in TIFF format in order for LR to recognize them.
Here's a video tutorial I've recorded explaining the workflow: Tonemap 32 bit images in Lightroom 5
mh++

HT202879 How can I open a file made with old version of Pages (before 09)?

I need to open a file made with old version of Pages (before 09). How can I do this? I only have iworks Pages free with Mac Book Pro.

You need either Pages '09 or the original Pages '08? programs.
With Pages '09 you simply open it and it accurate converts it to Pages '09. Pages 5 will open the Pages '09 version but may alter/damage the file.
With Pages '08 you Export it to Word .doc/.docx with mixed results, then open that in Pages 5 which may alter/damage the file.
Peter

Can video files made with a Canon XA-10 be imported into FCPX?

Files made with a Canon XA-10 do not seem to be recognized by FCPX.
Recording system of camcorder is MPEG-4 AVC/H.264.
Is there a format problem or a media conversion that needs to be made?
Thank you.
John

Tom is exactly right. Connect the XA10 to the computer using the USB cable that came with it. Then go File > Import from Camera.
Up will pop the import from camera window, which should show two cameras -- your Mac's built-in iSight camera, as well as your XA-10. And you should see the thumbnails from all the various videos you've shot with the camera. Just select the ones you want to import and click Import.
FCPX will begin importing (and transcoding) the videos. Do not disconnect the camera while this process is unfolding (it may take a while depending on how many videos and how long the videos are).

Trying to import a .mov file made with gotomeeting - no problems in past yet says No importable files -None of the selected files or folders can be imported. Change the selection and try again. re-recorded 3 times and still not accepting HELP

Trying to import a .mov file made with gotomeeting - no problems in past doing this. After 3 attempts recording the hour long video and trying to upload it to iMovie, it says No importable files -None of the selected files or folders can be imported. Change the selection and try again. What could the reason be?

After much research and troubleshooting, GoToMeeting replied with the final answer: We do not support the uploading of recordings to editing software. If you are having issues uploading a recording, unfortunately, we do not have tools or steps to resolve this. It is not a supported feature. I am sorry for any inconvenience this may have caused you.
The no longer plan to support editing of recordings made with their software. So, we are planning to find a new meeting provider.

Read binary file made with VB

Hi there,
Here is something I never did, so a little help is welcome
I have a binary file made with VB and I want to read it with LabVIEW 8.5.
I know the structure of the records in the file, it's something like:
    str1      As String * 5
    str2      As String * 6
    str3     As String * 2
    date      As Date
    str4     As String * 20
    str5 As String * 20
    int1       As Integer
flt1    As Single
    flt2     As Single
    flt3      As Single
and so on.
Further on there's even a 2D array: 3 rows, 400 cols of singles.
The total length of one record is 5120 bytes.
I can pick up whatever record from the file using the "Set file positions" & "Read from binary file" vi's but how do I convert those 5120 bytes in the correct structure?
I was thinking of a cluster but how do I define a fix string length in LV?
Also, is a cluster the right way to go?
So, like I said any help is welcome
Thanks

Alain S wrote:
I was thinking of a cluster but how do I define a fix string length in LV?
Also, is a cluster the right way to go?
So, like I said any help is welcome
Thanks
Defining a fixed sized string officially not possible, and even the non official way will get you bugs, so let's do the official route.
First open up the file with a hex editor, I normally use the Total Commander's built in F3, and then hit '3' to get a hex view. In that view I check wheter the lenght of the string is prepended to the string (Pascal and LabVIEW style) or ended with a Null (C style).
If none of them is happening, I would use a cluster of 5 U8's to get the string, convert this cluster to an array, and convert that to a string.
I have no idea what a 'Date' representation is in VB.
A cluster is very suitable for this task, however I do not get the info about the 2D array, if you could add a data file that would be very helpfull.
Ton
Message Edited by TonP on 28-08-2009 08:44 PM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

With Lightroom 4 I can't read any .DNG files directly into Photoshop CS. I have camera raw 2.4

With Lightroom 4 I can't read any .DNG files directly into Photoshop CS. I have"camera raw 2.4" selected in LR and the Plug-in for CS is Camera Raw.8BI.
Any suggestions on what to do? Thanks.

Welcome to the Apple Discussions. Have you tried a different DNG converter? Adobe released Adobe DNG Converter 5.3 in March of this year. Maybe, if it supports your camera, this version will create a more compatible file.

Hi, I godt 2 Questions: 1) My Adobe PhotoShop Elements 10.0 for MAC cannot read the RAW files taken with the new Canon 7D Mark II camera. 2) My Photoshop Elements has changed from the danish language to german language, how do I put this back ?

Hi, I godt 2 Questions: 1) My Adobe PhotoShop Elements 10.0 for MAC cannot read the RAW files taken with the new Canon 7D Mark II camera. 2) My Photoshop Elements has changed from the danish language to german language, how do I put this back ?

You're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content

After updating os to 10.9.1can't open pdf files. I get a message saying It may be damaged or use a file format that Preview doesn't recognise. I can still read older saved files but no new ones arriving by email. Any help would be appreciated.

After updating os to OSX 10.9.1 I can't open any new pdf files. I get a message saying It may be damaged or use a file format that Preview doesn’t recognise. I can still read older saved files but no new ones arriving by email. Also can't attach a pdf to an email to send out. Any help would be appreciated.

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print PDF's displayed in Safari, you may be able to print by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar may appear under the cursor. Click the printer icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

"iCal can't read this calendar file. No events have been added to your iCal calendar."

How do I deal with this error message-"iCal can’t read this calendar file. No events have been added to your iCal calendar." ? .ics vs .vcs?
Thanks

Greetings,
What version of the Mac OS and what version of iCal are you running?
Are you using MobileMe calendars (or any other server based calendars like Google) in your iCal?
While you answer those questions you can try the following troubleshooting:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Once the computer is back up and running open iCal and test.
Hope that helps.

I have the latest downloadable version of LR5. It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next

I have the latest downloadable version of LR5. It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next time is launches. I get the same message the next and every subsequent time it launches so I can't launch LR at all now.
I get that the preview file got corrupted somehow. Is there some way to fix this problem without building a new catalog?

Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You need to delete that folder and then start Lightroom again. Lightroom will generate a new previews folder.

I can't update the purchases I made with the old Apple I.D. How can I sync my old Apple I.D. with new one?

I can't update the purchases I made with the old Apple I.D;
how can I sync my old Apple I.D. with new one?

Only the Apple ID used to buy an app can update an app. Apple does not merge Apple IDs and Apple does not transfer content biught with one ID to another ID.

Can Mac read a dcr file made with win?

Similar Messages

Maybe you are looking for