Can MacBook Pro Ram fit in a white 13" MacBook?

Hello there,
I have a Macbook Pro 15" (mid-2010) and my wife has a white Macbook 13" (mid to late 2008).  I'm upgrading my 4GB ram to 8GB.  Does anyone know if my ram can fit into my wifes MacBook?
Thanks,
Lorne

No, your Mac book Pro uses 204pin 1066mhz PC3-8500 RAM
The model 4,1 (Early 2008) White MacBook uses 200 pin 667mhz PC2-5300 RAM

Similar Messages

  • Using 13" Macbook pro ram in a 15" macbook pro

        Hey Community I hope everyone is doing well.
    I just put my 2009 13" 2.53 ghz macbook pro ram in my new 2011 15" Macbook pro 2.0 ghz.
    I bought the 15" with 4 gb of ram so i upgraded it to 8 gb which i had in the 13".
    The 15" stock ram has four nodes on it, while the 13" ram has 8 nodes on it. However it was a great fit.
    Now my question:
    are there any longevity/performance issues i should be concerned about using this ram?
    I'm a heavy ram user in logic studio so the ram is definitely needed, i'm just wondering if i should be concerned enough to buy another 8gb's from crucial.
    Thanks!!!

    Andrew Cronkright wrote:
    I apologize guys i didnt even specify the ram that i put in!
    The ram is 1066 ghz ddr 3 also purchased from crucial.
    The 15" takes 1333MHz. At the very minimum, you are creating a bottleneck. Buy new RAM.

  • How much macbook pro ram on new quad 2.4 17"?

    how much macbook pro ram can be supported on a new quad 2.4 17"?

    16GB. Those Macs can't run 10.5.8.
    (63021)

  • My Macbook Pro won't get past white screen....

    My Macbook Pro is stuck on the white screen with the gray apple logo and loading gear spinning below---for hours now. Restarted multiple time without any change. Agh!

    Boot in safe mode. First, disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable, and remove all aftermarket expansion cards. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal.
    If you can boot in safe mode, try rebooting as usual (i.e., not in safe mode.)

  • How can I keep synchronized my macbook pro at the office and a traveling macbook air?

    How can I keep synchronized my macbook pro at the office and a traveling macbook air?

    Have you tried doing the sync via Time Machine?
    I thought it would be possible to backup the travelling machine and restore the machine at the office from the new backup.
    I read a warning from Apple that it is not advisable.
    I would be very interested in your opinion.

  • Can i use a macbook pro keyboard with lighted letters with my macbook early 2008

    i need answers!!!!!!can i use a macbook pro keyboard with lighted letters with my macbook early 2008

    No, the MacBook does not have the hardware on the logic board needed for the lighted keyboard.

  • Do macbook pro cases fit on macbook pro with retina display?

    I want to order a really nice speck case for macbook pro 13inch and i have got a macbook pro 13inch with retina display. Does it matter? Is there a difference between the two?

    yes their a difference.  The retna model is slimmer and doesnt have an optical drive.

  • Two Time Machines and one MacBook Pro ... migrating to a new MacBook Pro

    Background:
    I'm a fanatic about backups. I have a Time Machine at home (Time Capsule), and a Time Machine at the work (external USB drive). Both backup my MacBook Pro.
    I just got a new MacBook Pro. I plan to migrate my data from my old MacBook Pro (or a clone on a Firewire drive) rather than from one of the Time Machine backups. It's faster than a wireless transfer, and doesn't require all the mucking around with switching to ethernet and back again with Time Capsule.
    The question:
    How can I make sure both Time Machine backups recognize the new MacBook Pro as a continuation of the previous data? I could start all over again with two fresh backups, but I would prefer not to.
    Is it automatic that both Time Machines will recognize a familiar face with a new hat? Is there some trick to making it work, or, at worst, some trick to fixing it? I've read about changing the expected MAC address in Time Machine, but I don't think that's the best answer.
    Thanks for your help.

    rebby575 wrote:
    Background:
    I'm a fanatic about backups. I have a Time Machine at home (Time Capsule), and a Time Machine at the work (external USB drive). Both backup my MacBook Pro.
    I just got a new MacBook Pro. I plan to migrate my data from my old MacBook Pro (or a clone on a Firewire drive) rather than from one of the Time Machine backups. It's faster than a wireless transfer, and doesn't require all the mucking around with switching to ethernet and back again with Time Capsule.
    The question:
    How can I make sure both Time Machine backups recognize the new MacBook Pro as a continuation of the previous data?
    You can't and they won't. a new computer will start a new backup sequence and there is no way around that.
    I could start all over again with two fresh backups, but I would prefer not to.
    Is it automatic that both Time Machines will recognize a familiar face with a new hat? Is there some trick to making it work, or, at worst, some trick to fixing it? I've read about changing the expected MAC address in Time Machine, but I don't think that's the best answer.
    there is no better answer than that but even if you do change the recorded MAC address in TM backups, TM will still make a complete full backup of the new computer the first time it backs up.
    Thanks for your help.

  • I bought my macbook pro in march 2007.  I am currently running osx 10.6.8, but want to upgrade to lion or mtn lion.  Apple website says i need a mid 2007 or later macbook pro, how do I tell if my Macbook pro will support this upgrade?

    I bought my macbook pro in march 2007.  I am currently running osx 10.6.8, but want to upgrade to lion or mtn lion.  Apple website says i need a mid 2007 or later macbook pro, how do I tell if my Macbook pro will support this upgrade?

    The Mid-2007 model didn't come out until June 2007, so you must have bought an earlier model. It won't run Mountain Lion (OS X 10.8.x), but it might run Lion (10.7.x) if you can get hold of a copy, depending on which earlier model it is.
    Lion requires at least a Intel Core 2 Duo processor. The first MacBook Pros came out in January 2006, but they had "Core Duo" processors (no "2"). The Core 2 Duo MacBook Pros came out in October 2006. You could have bought either in March 2007.

  • I just purchased a MacBookPro after having a MacBook.  I have ILife, IWorks and Office for Mac.  How do I get those programs on to my MacBook Pro?  I will still use my MacBook at work so I need those programs to remain on it as well.

    I just purchased a MacBookPro after having a MacBook.  I have ILife, IWorks and Office for Mac.  How do I get those programs on to my MacBook Pro?  I will still use my MacBook at work so I need those programs to remain on it as well.

    You need a Firewire cable to run between the two Macs.  Using Utility>Migration Assistant running on your new MacBook Pro, transfer what you want (with all the preferences and such) from your MacBook to your MBP.  Here's more info from Apple.
    You might have an issue with the Serial number for Office, but hopefully you have that around.
    Hope this helps.

  • How do I get Iwork08 to work after transferring my old macbook pro information to my husband's newer macbook pro?

    I do I get iwork 08 to work on my husband's macbook pro?  I had an older macbook pro and he gave me his newer macbook pro.  So, I transferred all the stuff on my old macbook pro to his along with me being a new user/administrator, etc.  Now, when I try to create documents or try to print out something, iwork doesn't work, b/c I am logged on as a new user.  Help!

    He did have iwork installed, but it won't work for me.  When I transferred it to myself as new user, if gave me a trial period of 30 days, I was wondering why that was.  After the 30 days,  it said that I needed to put the serial number in from the iwork boxi or if I bought it from the app store, a serial number could be given to me.  Also, if I didn't have the box or the serial number, I could buy one?  My husband got the computer in 2008 and had the iwork 08 software and installed it.  Now, I guess since it has transferred over to a new user, I have to buy another iwork just to print out anything?  I don't get it. 

  • HT4889 If I use this migration  by ethernet from a macbook pro to an imac will the original macbook pro still have the original data

    If I use this migration  by ethernet from a macbook pro to an imac will the original macbook pro still have the original data

    Yes.

  • Contacts Sync - I have my contacts on iphone5 and MacBook Pro 2012.  I just purchased a MacBook Air 2013 and want the same contacts on that device.  What is the best way to do this?  Non-techie.  Thanks

    I have my contacts on iphone5 and MacBook Pro 2012.  I just purchased a MacBook Air 2013 and want the same contacts on that device.  What is the best way to do this?  Non-techie.  Thanks

    Follow the instructions for enabling your iCloud account on the MBAir here >  Apple - iCloud - Learn how to set up iCloud on all your devices.

  • Just got a new macbook pro and transferred files from my old macbook. Everything is fine except my iphoto will not show photos.

    I just got a new macbook pro and transferred everything from my old macbook. My photos show up as thumbnails in iphoto, but if I click on them, a "?" pops up for all of them!

    Copy the Library over manually.
    To move an iPhoto Library to a new machine:
    Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
    But however you do choose to link the two machines...
    Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
    Then launch iPhoto. That's it.
    This moves photos, events, albums, books, keywords, slideshows and everything else.

  • MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

    MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

    Try resetting the SMC.
    Barry

Maybe you are looking for

  • How do I sync my iphone with a different mac computer

    Hi there, My laptop crashed and I have changed my email address. I am now using an older desktop ( Mac OS X (10.6.8). I want to update my apple id on my iphone 4s but am not sure if syncing it to another computer will delete my info/ contacts etc. fr

  • 500   Internal Server Error Failed to process request in portal

    Hi ,* We face problems to run Dev and Qual systems on our Sap portal devices. Production is OK The error message (see hereafter) does not occur on welcome page but on any page that communicate by Web Dynpro with ECC SAP system 500 Internal Server Err

  • GridBag in a GridBag

    Hi there, having a spot of trouble with layouts. I'm very new to Swing, but I've done a bit of poking around and it seems the easiest way to set things exactly where I want them is in a GridBagLayout. I have a slight problem though, I have one column

  • Is this really a feedback forum ????

    it's jungle here ! Why do people ask questions about Forms , PL/SQL, in a feedback forum ?

  • Document not printing full size

    I am a new pages user, and I am creating a magazine for an english class. Two out of four of my articles do not print full size, even though the paper size is set up and everything else seems to be full size. When I look at print preview, the article