Can Macbook white 2.1Ghz 13.3' run Final Cut Pro?

Hi, I need your on this topic as i tried intalling FCP 4.5 but it woundn't allow me to open. Thers was an error message regarding AGP, has anyone come across this problem and will be able to help me please? Thank you
YK

I ran FCP 5.0 on my Macbook 2.4Ghz and it ran ok I had to set all my sequence settings and my REALLY low but as far as FCP 4.5 I am not sure.
I was working with HD footage too. You have to tweak it but it should work with 5. It's just really annoying because you have to Render everything in order to preview anything.

Similar Messages

  • Can my MacBook Pro run Final Cut Pro X fine?

    Hi,
    I was wondering if I can run Final Cut Pro X fine in my mid-2010 MacBook Pro? I am looking to get the software simetime this year. The specs are in my signature (the GPU is an nvidia 330m with 256mb of VRAM).
    Has anyone run FCPX in the Core i5 mid-2010 MacBook Pros? If so, hows the experience in terms of performance?
    Many thanks!

    You should be OK with an i5 machine but there seem to be many variables in how well each machine works. here's a thread you should look at:
    https://discussions.apple.com/thread/3726332?tstart=0
    Also, if you go to the app store and look on the FCX page you will find the specs.

  • Will iMac G5 2.1 run Final Cut Pro 4.0.1

    Tried to install and run Final Cut Pro 4.0.1 on my iMac G5 2.1ghz and it installed but would not run. I did get a message that read that some software or hardware was needed (AGB Graphics Card was listed in red) but I would think that the iMac had everything it needed. If you know if 4.0.1 should run or if the newer 5.0 will run on a std. off the shelf G5 iMac, please let me know?
    Much Thanks
    Greg J

    Final Cut Studio will run on your iMac.
    If he has the 1st gen iMac G5, it should run. If he has the ALS or the iSight, it won't.
    He has the 2.1 GHz, so he should have the 1st gen, yes?
    "Final Cut Pro 4 through Final Cut Pro HD 4.5 require a computer with an AGP video card for installation. PowerMac G5 (Late 2005) models (released October 19, 2005) and iMac G5 (iSight) models feature newer PCI Express video cards. Because of this, you can't install Final Cut Pro 4.x on these computers. Final Cut Pro 4.x is not supported on these computers."

  • What's the best Mac for running Final Cut Pro X?

    Title says it all. What's the best Mac for running Final Cut Pro X? I'm not looking to make a feature length hollywood film. But I'd like to be able to edit video without lag.

    Yes. Begin with the fastest processor / graphics card / and as much RAM as you can afford. (As all three will become obsolete over time.)
    I started from scratch. I have a 27-inch iMac with a 3.4 G Intel Core i7. (currently the fastest processor for an iMac) I also ordered the best graphics card--AMD Ratheon HD. I ordered 16G of RAM, but recently added more RAM to equal 24G. (OWC makes good after-market RAM for iMACs.)
    Last, I ordered a flash drive / SATA hard drive combo.  (250G on flash / ITB on SATA). The OS and all of my applications run off the flash drive. (for fast start up!)
    I put all of my media and FCP projects onto the SATA hard drive.
    Now, I had the option to order a 2TB SATA. But, I realized I can always buy more external storage as I edit more and more projects. ALSO! FCPX is GREAT when it comes to editing projects on external drives! I can segregate an entire project and its media files onto a removeable drive. I simply launch FCPX, plug in the drive and--poof!--I'm ready to edit. It sees the project and the media right away. When I'm done editing, I can then send this drive to another editor (also using FCPX) or attach it to my MacBook if I want to edit the same project in the field.
    This has worked for me. I wish you luck.

  • I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

    I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

    The only way that would work out is if you ran exactly the versions that were made for old PowerBooks. Anything newer may require Intel and not run, or will strain the poor old G4 CPU.
    Your needs have to be modest, too, because the problem with older music and video software is that they are not current as far as formats and codecs for the Web. If you want to output H.264, the current standard for YouTube/Flash video, older software may not support it, and in addition, H.264 is processor-intensive and is tailor-made for today's multi-core, 2+ GHz processors. It will overwhelm a G4. A PowerBook G4 can barely play YouTube videos.
    More perspective: The PowerBooks worked great for miniDV format editing. In other words, 480i SD/standard definition video in use from the late 1990s to the late 2000s. If that is all you want to do, edit tape from an old miniDV camera to SD output, then OK.
    But if you want to edit today's HD video, whether 720p from a snapshot camera/iPhone 4 or 1080p from a DSLR, the PowerBook and the software for it will either not recognize AVCHD/H.264, or it will slow the PowerBook to a dead crawl.
    I'm in agreement with the above: Intel Macs have been out for so many years that getting a used one is a much better deal than a dead-end PowerBook. And I loved (still love) my PowerBooks.

  • Preparing my MBP to run Final Cut Pro

    Hello,
    Apologies if this question has been answered, I've searched for over an hour but can't find what I'm specifically looking for.
    I would like to know what I need to upgrade / increase / expand on my MBP, in order to run Final Cut Pro and work with XDCAM and HDV source material.
    Currently:
    2.4Ghz Intel Core 2 Duo.
    2 Gb 667 Mhz DDR2 SDRAM
    NVIDIA GeForce 8600M GT, 256 Mb VRAM
    From my research I think that I at least need to increase the RAM and get a big external hard disk to store the material.
    Is there anything else I need to do?
    I expect many people will say, buy a Mac Pro but we just don't have the budget! If it takes a long time to render then we just have to live with that.
    Any advice much appreciated.

    As for DIY I can not give you advise, I live in Europe but buying ram at the Apple store is maybe not the budget way.
    I usually look here to install things yourself
    http://eshop.macsales.com/tech_center/installation.cfm
    There are for sure other/better sites but with the MBP installing extra ram is easy,
    A 1TB will be more then enough, I would go myself for 2x500 GB firewire, this gives the option that when a job is finished and you don't need the media anymore you can sweep one of the drives completely.
    Just my 2 cents

  • I can't import any files or folders into Final Cut Pro 7.0.3 projects

    I can't import any files or folders into Final Cut Pro 7.0.3 projects. When I select import and then either files or folders, I am able to navigate to the drive where the media is being stored, but then when I scroll to locate the files or folders the drive disappears. This problem began as an intermittent problem, but now I cannot import any files or folders. This problem started when I upgraded my operating system to Yosemite version 10.10.2 on my mid-2010 Mac Pro running with 16 GB of memory and an ATI Radeon HD 5770 1024 MB graphics card. Can anyone help me figure out and solve this serious problem? Thanks!

    Then just drag the files/folders from your hard drive into FCP.  Don't use the IMPORT option...just drag and drop.
    The problem started when you installed an OS that doesn't support FCP 7.  So if you want things to work smoothly, it's best to go back to an OS that did support FCP 7. Yosemite was written without taking FCP 7 functionality in mind, so it isn't fully functional. It might not do one thing for someone...but works for you in that respect. But then you can't do something else. The ways it doesn't work is always random.  Or it might work great for some people, because they don't use functions that might no longer work....so they don't notice it.

  • What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

    What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

    Hello Andres. I own an Early Mac Pro 2008, and have had the blessing of using both FCP X & Motion 5 for some time now. This is a pritty open question and it depends on your usage and the throughput nessesary to handle your work load. I can share what my set up is, & it may help you deside if this is enough power for you or help you move in another direction. Keep in mind that the buss speed and cpu are a big part of helping FCP X more so than the video card, although the video card does come into play here as well. Now if you are wanting to run Motion 5 as well, the video card is Almost Everything, and you need the biggest and best situation here that the throughput on this system will except. I'm running 14 gig of system ram, and the video card is an ATI Radeon 5870. For FCP X, running 1920x1280p footage optimised in pro-res 422, she can move along with some render time nessesary when dropping on the timeline, also filters, transistions, titles ex, have a bit of a laps time to render, but then she runs ok. This wait is not as much of a challenge with this set up as with Motion. I need a much bigger gpu on the video card for this app. Not sure if this computers throughput is really worth the upgrade. Beleive this though, Motion is demanding on using ALL you can give it. It is a Genious App, and it also calls for ALL THE POWER YOU CAN GIVE HER IN A VIDEO CARD. Conclution: if you are just starting which it sounds like, even a smaller video card than this can work For FCP X. Make sure you have at least 8 gig of cpu ram. 12 or more will help here. Also make sure the card is OpenCL compadible.....& this is in the thread above,,,,,,,,

  • Could I run Final Cut Pro 10.1.3 on Mavericks DP 2

    Could I run Final Cut Pro 10.1.3 on Mavericks DP 2

    Curiously, this picture I can see :-)
    The dialog is quite normal. It just means what it says, namely, there is not enough extra media at the edges of the clips (so called "handles") to be used for the transition, so FCP X needs to shorten some of those clips to create the handles - thus the total length of your timeline will decrease.
    But the fact that the transition appears as black in the browser, and that it is not applied, show that there is definitely something wrong.
    Since these default transitions are installed as part of the application itself, I believe the best course of action is to delete FCP X (use FCS Remover to completely remove all traces of the application), and then install afresh from the purchases section of the App Store.

  • HT4664 I have problem running final cut pro X because  NVIDIA GeForce 7300 GT graphics card I live in a remote area what are my options to fix this ?

    I have problem running final cut pro X because  NVIDIA GeForce 7300 GT graphics card I live in a remote area what are my options to fix this

    This is the list of Apple approved graphics, except for the cards for laptops. Replace your card with one of these. Get the best you can afford.
    NVIDIA
    GeForce GT 120
    GeForce GT 130
    GeForce GTX 285
    GeForce 8800 GT
    GeForce 8800 GS
    Quadro FX 4800
    Quadro FX5600
    ATI
    Radeon HD 4670
    Radeon HD 4850
    Radeon HD 4870
    Radeon HD 5670
    Radeon HD 5750
    Radeon HD 5770
    Radeon HD 5870

  • Where can I find a good, free effect for Final Cut Pro of electrocution?

    Where can I find a good, free effect for Final Cut Pro of electrocution?  I'm using it for a taser sequence.
    Thanks!
    Matthew

    Open Motion, look for lightningin the generators. From there, it's a question of figuring out how it works and what you need to do to make it work for your sequence. That's about as free as it gets and it will ony be as good--even if someone else did the work for you--as the amount of time you're willing to invest.
    bogiesan

  • Hi Ive downloaded the free trial version of Fcpro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later,Help

    Hi friends.
    Ive downloaded the free trial version of Final cut pro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later, please can anyone Help.

    Just download Mavericks (10.9) its free and installed it (Mac App Store)

  • HT1338 why I can't do capture from the camera in final cut pro x?

    why I can't do capture from the camera in final cut pro x?

    why I can't do capture from the camera in final cut pro x?

  • Can anyone recommend personal or class training, for Final Cut Pro in NYC?

    Can anyone recommend personal or class training, for Final Cut Pro in NYC?

    Try starting with the free online tutorials like Izzy, http://www.izzyvideo.com/final-cut-pro-x-tutorial/, or Final Cut Pro X TV, http://fcpx.tv/. I got started on theose a few months ago.

  • I'm running OS X, but I can't run Final Cut Pro 1.0 and appropriate upgrade

    I recently purchased a Macbook with OS 10.4.6 on it. I have Final Cut Pro 3, but I can only install it via FCP1 and upgrade to FCP2 and finally to FCP3. However, when I try to install 1.0, it says that this system cannot support it. I can't seem to figure out how to run Classic mode either.
    So, my question is, what are my options to run this software? (I really do not want to purchase the newest software.) Also, I know someone who has FCP3 full version (not an upgrade); would it be possible to install this software and use one of the serial numbers from one of my other software disks? Any help would be great.
    Thanks!

    FCE is more limited but depending on your needs it might be fine
    check out http://www.apple.com/finalcut
    why do you feel you need to download an upgrade
    after FCP 4 (3-4 years ago) you no longer needed an older version installed just the serial number as they discovered the problem that you are running into now
    DAVE

Maybe you are looking for

  • The best way to transfer videos between devices and mac?

    I have an iphone 4s, ipad and a macbook pro - is there any way to transfer videos wirelessly betwen these platforms? As far as I know icloud only allows photostream of photos only but nit videos. This is quite inconvenient for video users as I normal

  • How do I retain digital signatures when merging documents?

    We digitallty sign invoices, but when we merge them with the copies of the checks, the digital signatures are removed.  Is there any way to retain those signatures in the merging process?

  • How we can intiallize the object  state

    how we can intialize the object state without using constructor or getter setter method? is their is any way to intialize the state of object using encapsulation??

  • Can GATP confimed date come from production order finishing date??

    Hi Expert, I have one question to ask. in the GATP , I want to the APO system can consider the production ability , that is, when I create a sales order, the system will make  a GATP check in APO, if there is no enough stock, the system will create a

  • CS4 activation question

    Hi, I'm trying to get the serial number of my boss' installation of Adobe CS4 for the record. I don't have the CD. With CS3, I can deactivate the software without deleting the serial number and then open InDesign and get the activation number when it