Can MainStage receive Bank Change for more than 127 patches ?

Hi,
The clue is in the title!
I need to be able to select between approx. 240 patches from a Digital Console.
Possible ? And if so - how ?
Thanks in advance,
Jon

Thanks for explaining the need --- sounds like a good reason to me.
I wonder if you could create an Apple script that could listen for bank and program changes and then (A) use the bank to make MainStage load a concert and then set the patch? I have no idea what Applescript support exists in MainStage but if there isn't any, then you could always use brute force so that the Applescript first kills MainStage and then 'open' the desired concert to open MainStage again....then send the patch change via IAC.
Only problem with that solution is it would be rather slow.....a real hack!

Similar Messages

Can you make a movie for more than 2 minutes on an ipad and save it on a flash drive

Can you make a movie for more than two minutes on the ipad and sve it on a flash drive using windows XP

Using Apple's camera connection kit, you can use a flash drive to IMPORT photos and videos. However, you can't EXPORT any type of file to the flash drive.
 Cheers, Tom

Can a QuickTime movie play for more than 60 seconds per page

Can a Quicktime movie be set to play for more than 1 minute per page in Keynote. I have clips that run up to 3 minutes. For now I have pulled the clip into 3 different pages and set the times to match but I get a 10 second delay between the pages that is very distracting.

Yes I am trying to set up an automatic transition after the movie has played. I have still photos between the movies. I want the entire presentation to be self running. I did use the special builds in and out and have the action set at none. The movie clip will not run more than 60 seconds?

Can i take the printout for more than one billing document in SD at a time

HI ALL,
The issue is '' i want to take the print out for more than one SD - billing document at a time.
is there any config settings to be done.
please guide me if u have the solution ASAP.
Regards,
SOMU.

Yes, it is possible. However you may have to enable a field NAST-ANZAL. This field is available in VV31 when you are maintaining the output records. The field Number of Messages can be filled with the numberof copies youwant.
However, I think you have to read this in your custom program to trigger n number of copies. If that is done, you can take the printouts as many times as you want in a single trigger.
The code approx looks like this
IF nast-anzal EQ 0.
nast_anzal = 1.
ELSE.
nast_anzal = nast-anzal.
ENDIF.
nast-anzal = 1.
nast-dsnam = nast-kschl.
nast-dsuf2 = vbdkr-vbeln.
DO nast_anzal TIMES
If you show this field and talk to your developer, he should be able to help you.
Hope this helps.

Can a computer be authorized for more than one itunes account

My husband and I set up two separate iTunes accounts a number of years ago, and now we want to be able to share and copy our libraries. If I authorize my computer for his account, can it stil be authorized to my account?
And if it can't, what happens to my iTunes library?

1. Yes.
(60084)

When calibrating macbook pro in step 5 can i turn it off for more than 5 hours?

im not sure how to calibrate since i just learned that i have to do it to ensure battery life but im gonna use all the power in the afternoon and at night i will let it sleep but i dont want to wake up to charge it if it can only sleep for 5 hours.

Calibration isn't necessary in modern Macs with built in batteries. That process didn't calibrate the battery, it calibrated the circuits that monitor the battery.
From the following article:
Portables with built-in batteries
Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
http://support.apple.com/kb/HT1490?viewlocale=en_US

Master_detail for more than one record at a time

Hi,
How can i display master_detail records for more than one records at a time, for example, i have two tables A and B , A has username and role and B has username and profile. here i wanted to display 10 users at a time on my 6i form with username, role and profile.
i have created a master-detail relation ship with these tables when i'm executing F8 on blcok A , it displays 10 records on BlockA but, only one at a time on block B, how can i display all corresponding records on block B at a time.
Thanks for your help.Bcj

Thanks Roberts, that was realy informative due to some doubts i would like to confirm my requirements , i have two blocks A and B and each master record has only one detail record. but i wanted to display at least 10 master_detail relationships(records) on the form at a time, i would like to know is it possible to do without creating any table or view for example,
data in table A,
username role
AAA R1
BBB R2
CCC R3
data in table B,
username profile
AAA P1
BBB P2
CCC P3
i wanted to display it on form like below,
username role profile
AAA R1 P1
BBB R2 P2
CCC R3 P3
Also would like to know that how can i select data from dba_users, any restriction is there on forms 6i, i can select it on sqlplus.
Thanks Again, Bcj

Costed Multilvel BOM for more than one material

CK86 report shows costed multilvel BOM for one material.Is there any report whereby I can see costed mulitilevel BOM for more than one material
Regards
Paresh

Dear Paresh,
I dont think there is some standard report to meet this requirement,also please check whether this link can help you,
Re: Product cost report
Re: Report for Cost of Multiple products with Multilevel BOM explosion
Regards
Mangalraj.S

I made the purchase association for more than a week, but even having already received confirmation of payment and the invoice , I can not use the application . I am being told I do not have no purchase on my name

I made the purchase association for more than a week, but even having already received confirmation of payment and the invoice , I can not use the application . I am being told I do not have no purchase on my name. What i must to do ?

Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page

Can we use same program ID for more than one RFC scenarios

Hi experts,
            I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
data: iquote type standard table of ZIQMD initial size 0,
      IPRODUCT type standard table of ZPMS initial size 0,
      wa_quote type ZIQMD,
      wa_PRODUCT type ZPMS.
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
TABLES
    I_QUOTE       = iquote          .
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
'ID4'
TABLES
    I_QUOTE       = iquote          .
COMMIT WORK.
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
TABLES
    IPRODUCT       = IPRODUCT          .
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
'ID4'
TABLES
    IPRODUCT       = IPRODUCT          .
    COMMIT WORK.
when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER' , but iam not getting data for 'Z_CBT_RFC_PRODUCTMASTER' interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
              Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
Thanks in advance.
Thanks & Regards,
Poorna.

Just tried this and I can confirm that my earlier understanding was correct!
One of my colleagues confused me out and the conclusion is,
1. You need a separate TCP IP Connection for every interface with a Unique program ID.
Regards
Bhavesh

[Fwd: Client accessing MBeanHome for more than one domain receives SecurityException]

Fwd'ing to security newsgroup
-------- Original Message --------
Subject: Client accessing MBeanHome for more than one domain receives
SecurityException
Date: 4 Mar 2004 07:27:33 -0800
From: Dinesh Bhat <[email protected]>
Reply-To: Dinesh Bhat <[email protected]>
Organization: BEA NEWS SITE
Newsgroups: weblogic.developer.interest.management
Hi,
When a client accesses MBeans of more than one domains (Weblogic 8.1)
that have
different passwords, it receives a SecurityException. This occurs when
the MBeanHome
for each domain is looked up at initialization and reused for each
request ( to
access MBeans ). The security exception does not occur if the MBeanHome
for each
domain is looked up for each request. On initial review, this behavoir
seems inconsistent.
Looking up the MBeanHome for each request may introduce a significant
overhead.
I am not sure if concurrent lookups would also cause the same problem.
I have read on another post that we can work around this problem by
establishing
a trust relationship between the servers, but this may not be feasible
when one
is monitoring a lot of servers and the overhead of configuration may be
an issue.
I have attached code that can reproduce the problem.
Please advise on the correct approach.
Thanks
Dinesh Bhat
Panacya Inc.
import java.util.ArrayList;
import java.util.Set;
import java.util.HashMap;
import java.util.Iterator;
import java.util.Hashtable;
import javax.management.MBeanServer;
import javax.naming.Context;
import weblogic.jndi.Environment;
import weblogic.management.MBeanHome;
* This class reproduces the Security Exception that is caused when a client tries to access
* MBeans of more than one domain with different weblogic passwords. Here is the stacktrace of the
* exception
* java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
     at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:138)
     at weblogic.management.internal.AdminMBeanHomeImpl_811_WLStub.getDomainName(Unknown Source)
     at WLSecurityTest.getWeblogicInfo(WLSecurityTest.java:140)
     at WLSecurityTest.runTest(WLSecurityTest.java:75)
     at WLSecurityTest.<init>(WLSecurityTest.java:66)
     at WLSecurityTest.main(WLSecurityTest.java:51)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.intellij.rt.execution.application.AppMain.main(Unknown Source)
Caused by: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
     at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:682)
     at weblogic.rjvm.MsgAbbrevInputStream.getSubject(MsgAbbrevInputStream.java:181)
     at weblogic.rmi.internal.BasicServerRef.acceptRequest(BasicServerRef.java:814)
     at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:299)
     at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:920)
     at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:841)
     at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:222)
     at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:794)
     at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:570)
     at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
* Note: the exception is caused only when the MBeanHome for each domain is cached and used for subsequent
* transactions. The exception does not occur if the MBeanHome for each domain is looked up for each transaction. This
* would significant overhead in practice. Also the transactions across the various domains occurs serially, hence
* the effect of concurrent lookups has to be tested.
* Usage:
* This class has been tested with weblogic 8.1
* The class needs weblogic.jar in its classpath
* One can specify the weblogic details as System properties. The properties need to be specified in
* the following format:
* wls.host.n, wls.userId.n, wls.password.n where n is the weblogix instance number. Also specify
* the boolean system property reconnect.each.iteration to toggle between reconnecting or not reconnecting
* for each iteration. When not reconnecting for each iteration, the MBeanHome is reused and the Security Exception
* occurs.
* Following is the example of system properties
* -Dwls.host.0=localhost:7001 -Dwls.userId.0=weblogic -Dwls.password.0=weblogic
* -Dwls.host.1=localhost:7011 -Dwls.userId.1=weblogic -Dwls.password.1=weblogic1
* -Dwls.host.2=localhost:7021 -Dwls.userId.2=weblogic -Dwls.password.2=weblogic2
* -Dreconnect.each.iteration=false
public class WLSecurityTest
ArrayList wlsDetailsList = new ArrayList();
HashMap connectionMap = new HashMap();
public static void main(String[] args)
try
WLSecurityTest wlSecurityTest = new WLSecurityTest();
catch (Exception e)
e.printStackTrace();
* Constructor
* @throws Exception
public WLSecurityTest() throws Exception
int noOfTries = 10;
getWLSDetails();
for( int i=0; i <= noOfTries; i++)
runTest();
* Runs the test
private void runTest()
for (int i = 0; i < wlsDetailsList.size(); i++)
WLSDetails wlsDetails = (WLSDetails) wlsDetailsList.get(i);
getWeblogicInfo(wlsDetails);
* Get Weblogic details from System properties
* @throws Exception
private void getWLSDetails() throws Exception
wlsDetailsList = new ArrayList();
String hostKeyTmpl = "wls.host";
String userIdKeyTmpl = "wls.userId";
String passwordKeyTmpl = "wls.password";
boolean done = false;
for (int i = 0; !done; i++)
WLSDetails wlsDetails = new WLSDetails();
String hostKey = hostKeyTmpl + "." + Integer.toString(i);
String userIdKey = userIdKeyTmpl + "." + Integer.toString(i);
String passwordKey = passwordKeyTmpl + "." + Integer.toString(i);
wlsDetails.hostName = System.getProperty(hostKey);
done = (wlsDetails.hostName == null) || (wlsDetails.hostName.length() == 0);
if (!done)
wlsDetails.userId = System.getProperty(userIdKey);
wlsDetails.password = System.getProperty(passwordKey);
connect(wlsDetails);
wlsDetailsList.add(wlsDetails);
* Lookup the MBeanHome for the specified weblogic server
* @param wlsDetails
* @throws Exception
public synchronized void connect(WLSecurityTest.WLSDetails wlsDetails) throws Exception
Context ctx = null;
MBeanHome mbHomeLocal = null;
try
Environment env = new Environment();
env.setProviderUrl("t3://" + wlsDetails.hostName);
env.setSecurityPrincipal(wlsDetails.userId);
env.setSecurityCredentials(wlsDetails.password);
Hashtable hashtable = env.getProperties();
System.out.println(hashtable.toString());
ctx = env.getInitialContext();
wlsDetails._mBeanHome = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
catch (Exception e)
e.printStackTrace();
* Gets weblogic information using MBeans
* @param wlsDetails
public synchronized void getWeblogicInfo(WLSDetails wlsDetails)
try
boolean reconnectEachIteration =
Boolean.getBoolean("reconnect.each.iteration");
if( (reconnectEachIteration) || ((wlsDetails._mBeanHome == null) && (!reconnectEachIteration) ))
connect(wlsDetails);
MBeanHome mbHomeLocal = wlsDetails._mBeanHome;
String domainName = mbHomeLocal.getDomainName();
Set allMBeans = mbHomeLocal.getAllMBeans();
System.out.println("Size: " + allMBeans.size());
Set clusterMBeans = mbHomeLocal.getMBeansByType("Cluster", domainName);
System.out.println(clusterMBeans);
MBeanServer mBeanServer = mbHomeLocal.getMBeanServer();
catch (Exception ex)
ex.printStackTrace();
* Class that holds weblogic server details
class WLSDetails
String hostName = "";
String userId = "";
String password = "";
MBeanHome _mBeanHome = null;

If Server version is 61.
Make user "system" password of all weblogic servers same.
If Server version above 61(70,81)
In the Security Advanced Settings un check generated credential and specify a common credentail for all the weblogic servers(domains).

I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one?

I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one? If it could be fixed, how much would it cost?

If it is still under warranty you can call the 800 number to apple and enter the serial number and it will tell you if it is under warranty or not if not its like $30 basically for them to help or something like that it said today when i called...
Or take it to a genius bar if you have one near?
Or further explain what setting you are needing fixed back and im sure someone here can help you for free!

Change Capture For Siebel OLTP task in DAC running for more than 10 hours

whole etl load used to complete in 2 hours (as on now siebel data having sample data). since last Friday Change Capture For Siebel OLTP task in DAC execution plan running for more than 10 hours. I am not able to trouble shoot the problem because no log for this task
what could be the reason for this problem? how can I fix that problem?
Appreciate your help
Thanks
Jay.

Which ETL is it that is taking the longest (is it an SDE, SIL, PLP?). I have seen someOracle vanilla ETLs coded in a way that is very ineffective. Check the DAC and Informatica logs and find out which mapping it is and where the delay is (e.g. SQL, write to DB..etc).

Every time my lg g pad 8.3 lte tablet is turned off it reverts the saving email attachment back to internal storage. Every time I turn on, I change it back to save to SD card. It stays that way until it is turned off for more than a minute. If I do a r

Every time my lg g pad 8.3 lte tablet is turned off it reverts the saving email attachment back to internal storage. Every time I turn on, I change it back to save to SD card. It stays that way until it is turned off for more than a minute. If I do a restart, it holds the setting, but loses it when it is shut down for any period of time. Does anyone else have this issue? The setting holds for photos taken with camera storing to SD card. Only the email attachment setting does not hold.

I believe that system has a hall sensor on it to detect when the lid is closed so it can put the system to sleep and/or disable the monitor so it can be used with an external monitor only. If the sensor is marginal or has a bad cable, it may intermittently cut the monitor on and off, and may likewise put the system to sleep. One way to check would be to plug in an external monitor and if the laptop's screen cuts off or doesn't show up, start using the trackpad and press on a non-typing key like the shift key. If the external display suddenly pops and becomes active while the laptop display remains black, it's probably a problem with the sensor or the cable/connection. You might be able to fool the sensor into kicking on and off by moving a magnet over it. It's located on the left had side of the base with the unit opened up, and right over the audio output plug.
I know of some people that put a small magnet right over the hall sensor's location so the laptop display turns off and they use the system with an external monitor, keyboard, and mouse. If fooling with magnets, make sure they're small and don't get them close to the hard drive because a strong magnet can wipe them out.
I don't know if this will help you much, but it might.

Can One GL be mapped to more than one House Banks

Dear SAP Gurus
I have a query
Can one GL be mapped to more than one House bank.
as a business requirement, we need to map 2 different bank accounts to same GL and both will have different Cheque series for Automatic payment program .

Hi,
You meant to say in maintain same GLs iin Account IDs under single House Bank? GLs are assigned to each account IDs under a House Bank not directly with a House Bank.
Anyway, it is possible to map single GL to multiple Bank Accounts of House Bank, but as a standard function it is advisable to map each GL to different Bank A/c so that automatic reconcilation wont create any problem while selecting open items.
Regards
Prasad AV

Can MainStage receive Bank Change for more than 127 patches ?

Similar Messages

Maybe you are looking for