Can MainStage split the audio outputs from a plug-in to separate busses/out

Take EXS24 or Battery 3 or Kontakt as examples
Only one plug-in instantiated but each drum 'hit' sent to separate outputs from within the plug-in/VI and brought into the mix on Audio/Aux channels for separate processing.
It's easy to set up in ProTools and Logic.
(I don't want to send the output of the channel strip to a bus - I know how to do that)
I've read the manual so many times and can't find any answers.
Does MainStage actually allow this routing ?
Thanks for any help
Lee

As far as I know, the only way to do what you want in MainStage is to set up an EXS24 for each output.
The EXS24 does have an option to load with multiple outputs, but I haven't found a way to make it work on my set up.

Similar Messages

Can you redirect the audio output of iTunes via Apple TV?

I currently have iTunes running on Windows XP with an Airport Express connected to my home stereo. I toggle the iTunes audio between my PC and the Airport Express via the iTunes speaker setting. With Apple TV, will I be able to toggle the audio output from the Apple TV interface?
Thanks,
Chaaad

No, you can use AppleTV like an Express to have audio playing in iTunes relayed to it, but you can't play something on AppleTV and direct the output to the Express.
AC

How can I display & split the audio & video from the same digitized clip?

I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie.
I want to "pull up" the audio in one section - meaning I want to take cut about 20 frames of audio from the end of a shot, and then move all the other audio up to fill the hole. To compensate for the missing 20 frames, I'll cut video off the head of the next shot. Some call this prelapping. Some call it an L-cut. Some call it asymmetrical trimming. Either way, I can't figure out how to do it in iMovie.
My clip appears in the timeline as one track - a single track that contains the video and 2 audio tracks. How can I display the audio that's tied to the video on its own track? Then I think I could split audio & video wherever I wanted and trim things up - but I can't figure out how to do it.
Am I asking too much of this software?
BTW, I never see the option to "Split audio clip at playhead". I'm not displaying clip volume or waveforms. Choosing to display waveforms doesn't show me anything. Maybe iMovie thinks I'd only want to see waveforms of audio that isn't tied to my video-and-audio clips?
Thanks in advance for any help...

Jordon,
"Am I asking too much of this software?"
No, you're not.
You first want to select your clip(s) and choose Advanced>Extract Audio.
This will copy the audio from the video clip and place it on one of the two separate audio tracks while lowering the audio level to zero in the original video track.
You can now edit and move the audio independently of the video.
With the audio clip selected, you'll find you now have access to Edit>Split Selected Audio Clip at Playhead.
Matt

How can I get the Conditoned output from PXI 1520 in PXI 1011 combined Chassie?

Respected Sir,
I am using PXI-SCXI combined Chassie PXI 1011 for my application. I have placed three SCXI 1520 modules, a motion card PXI 7352 and PXI 6052E DAQ card in the combined chassie. You know the PXI 1520 and PXI 6052E are connected internally using the Backplane of the SCXI and is not user accessable. Now I need the conditioned output of the PXI 1520 to be used as an Analog input for the Motion Control card PXI 7352. How can I do that? Whether PXI 1180 could solve my problem? If so, how do I connect the PXI 1180 to PXI 1011?
Kindly clarify me as soon as possible.
Thanking you,
Ramkumar. D

Dear Sir,
I have already placed my DAQ card at the correct place and configured it. I need some more clarification from you. I have attached my Query in .txt format.
Kindly reply as soon as possible.
Thanks,
Ramkumar. D
Attachments:
Clarification.txt ‏2 KB

Where can i find the Audio Files from Games?

Who can help me i' am serching the folder for Audio Files from Games and Application's where can i find it by the way the sound folder from Application is not so important!

Google audio game files, this is a free link. but there are quite a few.
Hope you find the file you are loking for, plenty of hunting out there:)
http://soundbible.com/tags-game.html

How can I get the audio only from a home made video

I have several home videos saved on my iPhone and I am wondering if I can get the audio off of the videos to make an audio CD. I have a PC. Windows 7

Put the clip in an iMovie Project. Then share the project using the SHARE menu,
Use SHARE/EXPORT USING QUICKTIME
Choose SOUND TO AIFF.
AIFF is an uncompressed audio format. You can use iTunes or GarageBand if you need to convert it to AAC or MP3.

How can I delete the audio track from a clip and have no audio associated?

the clips I insert always add an audio track,and seem to be linked to video track.I just want to delete audio tracks,and have no audio track associated with the original clips .
How do I do this ???

Second time this question came up today.
Click the a1/a2 buttons in the patch panel at the head of the timeline to decouple the audio from A1/A2. Then edit the picture into the timeline.

Where in new version (2.0) can you change the audio output port?

I updated to the new version. On the older version, I had a selection of audio ports (like my bluetooth headset, or the headphone jack). This option apparently is not available on the new version or if it is, it is not readily apparent. Now I have to turn off my headset to change back to headphone output.
Not friendly.

They are now controlled via the "Control Center" - swipe up from any screen to find bluetooth and Airplay controls (and some other useful stuff like calculators and torches)

Can I split the output of my airport to more than one device?

I have an apple airport connected to my stereo. This allows me to listen to my itunes library over my household stereo. I want to hook up a second stereo, with speakers in a different room. Can I split the RCA outputs so that it goes to a second stereo?

bayfish,
edex67 is right that a second AirPort Express would do the trick. It would have the advantage that you could select from the Mac which stereo got the signal, and you could even drive separate signals to the two stereos should you (or your guests) have a second AirPlay source.
If you want to try the splitter idea, it would likely be cheaper than another Express, but don't buy the cheapest cable, especially for the long run to the second room. If you have the inaudibility problem that edex67 mentioned, you can try turning up the volume on the stereo(s)..

How can I create an audio CD from the audio only portion of my iMovie?

Hello, I brought in about 50 min of Digital video into iMovie, I separated (split) the audio from the video, I unlocked the audio, I deleted the video, and now I want to just create an audio CD from the audio that is left.
Can I do this? and if yes how? If I can not, how can I create an Audio CD from on my G5 off a tape on my digital camcorder?
Any help would be apprecaited.

This is how:
Go to:
'File'
'Share'
'Quicktime'
'Expert Settings'
'Audio as AIFF' or pick your brand of compression.
Drag and drop the resulting file into iTunes.
Enjoy!
P.S. - You didn't need to delete the video but I think that'll be okay.

Can I set the audio INPUT to my pre-amp, and audio OUTPUT to the built in?

I am using Logic Express 7. I want to set the audio input to my Firefox pre-amp, but set the audio output to my computer's built in speakers. I want to essentially record into the pre-amp and listen to the playback through my speakers. I can easily do this in GarageBand, but haven't found a way in Logic.

The remaining problem I'm having is when I record into an "Audio" track via my microphone which is plugged into the Firebox, I'm still only hearing the playback from the Firefox headphone jack, not the computer's built in speakers.
Did you select your new aggregate device in Logic's audio preferences? If so, then the problem is probably with your settings in the control panel which controls the Firebox - I don't use it, so I don't know what it's called, but it controls the routing and monitoring for the Firebox. Check the Firbox manual - there are probably two settings, one for playback and one for direct monitoring when tracking.

How can I toggle my iTunes audio output from my TV speakers to my Mac speakers

I've just recently set up my Apple TV.
This morning, I tried playing a song on my Mac with the intent of hearing it from my Mac speakers. However, the output came out of my TV speakers. How can I choose where the audio output is coming from?

From your Old Computer... Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
An Added Bonus is that you will then have a Backup of iTunes...
Backup iTunes to an External Drive
http://support.apple.com/kb/HT1751
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html

How can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

how can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

Tom Wolsky wrote:
The advantage goes to FCP7 if you allow that it can copy and paste filters, audio and video, transformations, and other attributes separately.
You can do that in FCPX too, as all the things you cited are listed separately in the inspector.
Here's a little gotcha. Let's say you've color corrected a few clips and you've applied an effect to one and want to paste it the other clips. You switch off color correction and copy the clip. You select the other clips and paste effects. What do you think happens? The effect is applied, but the color correction is applied as well, only it's switched off as it was in the first clip, so all the color correction on the other clips is lost. Fun, eh?
I'll try to replicate your gotcha - but no, that doesn't sound like fun at all!

How can i detach the video from a clip so i can only use the audio when using imovie?

how can i detach the video from a clip so i can only use the audio when using imovie?

First, go to iMovie/Preferences and enable the Advanced Tools.
Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

Can I rip the audio from a video so that's all i have?

I have a couple of comedy videos and i find it unecessary to have the video and the audio, since it would be just as great with only the audio. So my question is if anyone knows if i can rip only the audio froma quicktime movie? thanks in advance.

Try virtualdub found at virtualdub.org. I have never tried a quicktime movie. If it doesn't work, go to www.digital-digest.com. They will have the answer.

Can MainStage split the audio outputs from a plug-in to separate busses/out

Similar Messages

Maybe you are looking for