Can Markers (or anything else) automatically change the patch?

I've been looking all over to try and figure out how to have MainStage automatically change to the next patch when a new Marker comes up on the backing track through PlayBack.
Basically, when i'm playing to a backing track, i sometimes play the pads and keys on my Akai MPK49, and when a new section comes up and i need need to change my synth sound, i don;t physically have enough hands to change to the next patch. I've read a load guides, but using the AIC driver in Logic seems far too complicated and I'm getting a bit out of my depth.
The whole point of me using markers is to identify different sections with different instruments, but I have to change between them manually anyway?
Is there a way to have the Marker automatically change the patch? The only other way i can see of getting round this live is having a midi footswitch to automatically cycle through the patches, which means Markers are of no use to me in my 'Perform' view really.
Any help would be amazing!

Hi
Currently, there is no 'super easy' way to have MS change patches automatically, and definately NOT directly from Playback markers.
It may be possible to make use of the MIDI file 'send' capability per patch or set, routing out and back in to MS, but frankly, NOT a great workaround.
CCT

Similar Messages

My iPad is downloading my video purchases automatically, but it's only downloading two episodes from Supernatural S10 that I have watched and deleted. I can't stop it from downloading, and I can't download anything else because of it. Help!

My iPad is downloading my video purchases automatically, but it's only downloading two episodes from Supernatural S10 that I have watched and deleted. I can't stop it from downloading, and I can't download anything else because of it. I don't know what to do. There is some sort of glitch happening and it's really affecting my iPad. I've tried letting it download but before it completes, it says it is unable to complete process and asks me to try again. I am on a limited interest data plan and can't afford these downloads to continue. What can I do?

Have you tried deleting the App within the Settings menu (rather than from the Home Screen)?
Settings>General>Usage>
From the Apps list, find the App (press "Show all Apps" if the app is not in the immediately shown list), tap on the app you wish to delete, then tap "Delete App"

Ipad keeps requesting outlook password, trying cancel but still in cycle - can not do anything else. NOTE - recently change email password on PC

ipad keeps requesting outlook password, trying cancel but still in cycle - can not do anything else. NOTE - recently change email password on PC

Try a reboot:
To reboot your iPad, hold down the sleep/wake button and the home button simultaneously until the screen goes black and the Apple logo appears. If, during this process, a slider appears on the screen to power it off, ignore it and keep holding the buttons down.
Rebooting your iPad can solve a lot of problems. Once you do that, go into Settings > Mail, Contacts, Calendars and make sure the correct, new password is entered in that account.

Address Book automatically changes the "Me" card to somebody else's vcard

We are using 10.6 server to provide LDAP and Address Book services, lately we've notice that Address Book automatically changes the "Me" card to somebody else's vcard which causes iChat and other apps to show the wrong user name.
Is this something that might be caused by an issue in LDAP? I created a record in LDAP which we use as a common account that can be accessed via CardDAV and everybody "shares" this address book (our version of a GAL).

No solution for you... only a half hearted "me too"
https://discussions.apple.com/message/17910812#17910812

I changed my email on my Apple ID and now I can't purchase anything from iTunes or the app store. How do I fix that?

I changed the email on my Apple ID and now my password won't work and I can't get anything from iTunes or the App store.

Try logging out of your account on the iPad by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if it then works.

How do I change the default programme to open pictures when downloading? Why can't I make it automatic? - the tick box is greyed out.ut

How do I change the default programme to open pictures when downloading? It always proposes Windows Live Photo Gallery and I have to change it to Windows Photo Viewer every time. Why can't I make it automatic? - the tick box is greyed out.

Thread discussing this issue here:
http://discussions.apple.com/thread.jspa?messageID=1289317

How can ID automatically change the business system while importing?

Hi gurus,
There are many scenarios in our PI system. It will be a tedious work if we don't use transport system(CTS+).
You know we have to create the scenarios manually in Integration Directory since the business system is different.
The question is as below (BTW:We are using local SLD for dev,qas,prd separately):
If we don't use transport system, and only use export and import functionality, and create business system group, can we make the ID automatically change the name of business system while importing?

Hi Xinjiang,
You can follow below method.
In Quality system transport targets will be DEV(Dev pi system) ---> QEA(Quality PI system)
In Production system transport targets will be DEV(Dev pi system) ---> PEA(Production PI system)
This will ensure that you does not need to create separate request in Quality system. You can use the same request created in Dev to transport to production system. This will reduce your efforts of transportation. This is the same type of approach that is followed in ECC system as well or next solution is creating transport target in each sld system as you mentioned below,
we have three local SLD, so we need to create TS and BS for PI DEV in SLD QAS, and create TS and BS for PI QAS in SLD PRD,
Following link will help you for defining transport target.
http://help.sap.com/saphelp_nwpi71/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm

I tried to update my ipad3..now I have the dreaded red bleeping screen of death... it is literaly bleeping on and off. I can't turn the ipad off and I can't do anything else either. Any thoughts?

it is literaly bleeping on and off. I can't turn the ipad off and I can't do anything else either. Any thoughts?
I plugged it into my laptop and it still doesn't do anything but blip red.
I knew I should have waited to up date it until I got back. everytime i try to update one of my ipads, something goes wrong.....
I really need my ipad back as I am going on a trip tomorrow morning and need my gps map on there.

I held down the sleep and home key to shut down the ipad.... it's restarting...hopefully this will work!

When I try to File Save As on an .FLV movie, Firefox automatically changes the filetype to .mp4 while Chrome for instance retains the .FLV file type. I wanted to see why this is and how it can be fixed to work similarly to Chrome. Thanks.

When I try to File > Save As on an .FLV movie, Firefox automatically changes the filetype to .mp4 while Chrome for instance retains the .FLV file type. I wanted to see why this is and how it can be fixed to work similarly to Chrome. Thanks.

If that file is an FLV file then Firefox should save it as such and not change the file extension.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
See also:
*http://kb.mozillazine.org/File_types_and_download_actions
*https://support.mozilla.org/kb/Managing+file+types

Since updating to 3.6.1 I don't get an empty browser window in my tool bar whe. it opens --- just a list of search engines. I can't find anything in "Help" or the FAQ's that seem to address this. My only choice seems to go back to Safari.

Since updating to 3.6.1 I don’t get an empty browser window in my tool bar when it opens --- just a list of search engines. I can’t find anything in “Help” or the FAQ’s that seem to address this.
My only choice seems to go back to Safari.

I am not sure what your problem is, can you give more details.
One possibility is you may be in full screen mode, for details on fixing that see the [[menu bar is missing]] article.
If you are missing various toolbar items, see the [[back and forward or other toolbar items are missing]] article.
If your problem is something else please give more details.

Can i use anything else to sync my ipod?

i keep having the message that my ipod cannot be updated as there is a missing file. I've followed the guide on here and have reinstalled it etc and followed advice on here, but it still doesn't work.
I'm sick of i-tunes, can I use anything else to put songs on my ipod? I know that media player doesn't recognise ipods, but is there something else I can download to put songs on.
This is really frustrating me, and I'm thinking of taking my ipod back, have only had it 3 days, but if I can't put anything on it there's no point in me having one.

You could have a look at Anapod, XPlay or EphPod:
Anapod Explorer
XPlay 2
EphPod
These programs will all let you manage an iPod however there are a couple of things that they won't do:
a) You won't be able to update the firmware on your iPod if a new version comes along. The iPod software updater is integrated into iTunes 7
b) If purchasing iTunes Music is something you wanted to do you won't be able to buy from the iTunes Music store.

In Blackberry Z 10 "HUB MANAGEMENTS", automatically changes the items that are included in my main View of the Hub Managements.

In Blackberry Z 10 “HUB MANAGEMENTS”, automatically changes the items that are included in my main View of the Hub Managements.
I really don’t know how it happens, “Off or On” thing, without knowing me. When any Email hits to my device and not shows in my “HUB MANAGEMENTS”, at that point of time I come to know, it’s Off again.
Then whole process again, I go in “HUB MANAGEMENTS” and switch it on again and again.
I need Blackberry Z10 OS developers focus on this issue…

I can confirm this behaviour and it defeats the purpose of having a hub.
Could a BBTA confirm that this has been filed or even solved internally?
Olivier - interfaSys ltd
Developing for BlackBerry 10 devices using the Sencha Touch framework.

Financial Reporting 9.3.1 automatically change the height of the row

How can I make the reports generator automatically change the height of the row if the text does not fit into the cell? I tried different PDF generators (AFPL Ghostscript 8.51, Adobe Acrobat Distiller 6.0) but result was the same: http://sql.ru/forum/actualfile.aspx?id=6396177

Hi,
In HFR if you are not allowing expansion on the row or column, it wont expand itself according text length.
So you need to anticipate the row hight and width according to your need. You can define this in the property sheet.
Thanks,
aly

Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.

Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.When i start it the browser is not open and appears a message
Mozilla Crash Reporter
== Crash ID(s) ==
20100611143157
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; InfoPath.3)

the 20100611143157 is an update which won't instal automatically on my notebook

How can I get Illustrator to automatically resize the font to a designated page width?

I want to be able to type lines of text and have Illustrator automatically change the font size so that it fits that width of the page exactly, even if on one line there are 8 words and on another line there are 2 words - I want the big and small letters effect. I was previously doing this in Photoshop manually but someone suggested I could do it easier in Illustrator so here I am....
Thanks.
Jay

each line has to be a separate text object (point text, not area text)
use this version, as SRiegel pointed out, the script was missing a line
#target Illustrator
// script.name = textBlock_CS4.jsx; // not tested on CS5 yet.
// script.description = converts selected point textFrames into a Block of Text;
// script.required = one document with at least two selected text frames;
// script.parent = carlos canto // 12/4/11;
// script.elegant = false;
if (app.documents.length > 0)
        var idoc = app.activeDocument;
        var sel = idoc.selection;
if (sel.length>1)
var width = prompt ("Enter desired Text Block width in Points", 300, "Text Block"); //
if (width!=null) // quit if pressed Cancel
var dupLayer = idoc.layers.add(); // add a layer to place the new block of text
dupLayer.name = "Text Block";
var blockGrp = dupLayer.groupItems.add(); // add a group to final output
blockGrp.name = "Text Block";
var left = idoc.width/3; // place block at the bottom 3rd of the page
var top = idoc.height/3
var spacingMM = prompt ("Enter spacing in Millimeters", 2, "Text Block"); // text lines spacing in mm
var spacingPts = new UnitValue(spacingMM,"mm").as ("pt") // convert to points
for (i=0; i<sel.length; i++) // loop thru selection
if (sel[i].typename == "TextFrame") { // continue if textFrame, ignore other pageItems
var itext = sel[i].duplicate(blockGrp, ElementPlacement.PLACEATEND); // duplicate text
itext.selected = false; // deselect it
grpName = itext.contents; // get contents to name outline group
var ioutlined = itext.createOutline(); // create outlines
ioutlined.name = grpName; // rename group
var perCent = width/ioutlined.width*100; // get scaling percentage, based on desired width of block
var scaleMatrix = app.getScaleMatrix(perCent, perCent);
ioutlined.transform (scaleMatrix); // scale outlined text
ioutlined.left = left; // position text
ioutlined.top = top+ioutlined.height+spacingPts; // top = previous item top + spacing + current item
top = ioutlined.top // get current top to use on next item
} // end if - non text frames
} // end for loop - selection
} // end check prompt for calcel
} // end if selection > 1
else
alert ("Select at least 2 textFrames before running");
    } // end at least one document
else
        alert ("There are no open documents");

Can Markers (or anything else) automatically change the patch?

Similar Messages

Maybe you are looking for