Can MBA connect to 2 external monitors?

I have been using a dual-display graphics card in a PC for some time, with 2 monitors connected to make a large working area. Is it possible to do this with the MBA? Is the mini displayport to DVI compatible with dual-display? So far, I have been able to successfully use the MBA with lid closed connected with one external monitor. Cheers!

My impression is that the dual-display adaptor may work with one of those Y DVI splitters for dual-monitor cards. But is anyone certain about this?

Similar Messages

  • With YP2 I cannot listen to music when connected to an external monitor

    I am using the hdmi connection for my external monitor and when connected I cannot get any sound from my YP2. It works just fine when connected to a TV so I am assuming the sound signal has to be amplfied by the tv or receiver. A monitor typically does not have any sound amplification, I think, so my guess is this is the problem. I was hoping I could at least listen to music when earphones are plugged in, but I can't.
    Another minor problem I have using the YP2 connected to my monitor is I cannot get the full resolution of the monitor, I will update this thread with the actual montior (it is an Asus 27" professional grade monitor with something like  2500x1600 resolution, I cannot remember the actual numbers) model number. The best I can get with the YP2 is around 2000x1200.
    Gary

    I spent quite a bit of time with Lenovo support. They got on my computer remotely, replaced the display driver, and still the same problem. It appears the problem is the resolution can only be adjusted by increments. The highest was 3200x1800 and the next lowest was 2000x1500 and then 2000x1000 (I am rounding the last two). So the computer resolution defaults to the 2000x1000 resolution when hooked up to the external monitor.
    For all practical purposes this is fine. I rarely have to do any photo editing that is that critical and if I need the higher resolution I can edit with my desktop.
    Gary

  • How can I set up an external monitor to extend my screen in windows 7 bootcamp?

    How can I set up an external monitor to extend my screen in windows 7 bootcamp?  I have updated bootcamp to the latest version.  The monitor I have works while I am using Mac OS X. While in bootcamp the monitor is dectected and I am able to select the settings and displays however the external monitor remains alseep.  I hooked it up using a mini display port to VGA adapter.  Any suggestions?
    Thanks

    On your Windows desktop right click and select Screen resolution from the menu. You should see a window like this:
    Make sure you select Extend and then set your resolutions for each monitor.
    If this does not work for you try asking on a Windows forum about extending displays to a second monitor.

  • Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

    Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

    You are referring to a feature called Clamshell Mode, please read Clamshell Mode setup for instructions.
    BTW when posting when you use generalities such as "have tried everything" this tells us nothing. When posting please be specific and try to paint a complete picture. It just makes things easier for those trying to help you.

  • HT6030 Why can't I get an external monitor to work on my macbook running Mavericks

    I'm trying to use an additional monitor ( Samsung) but both screens just flash on and off, I'm running Mavericks latest east version and using the mini port and VGA connector, can anyone help me here?

    Hey Starmanpaul43,
    If you haven't already, I would run through the steps in this article, which can help you troubleshoot the external monitor issue:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Welcome to Apple Support Communities!
    Regards,
    Delgadoh

  • When my macbook pro is connected to an external monitor

    when i close my macbook pro whilst it is connected to an external monitor the internet connection slows down, does any body know how to fix it ?

    A quote from the attached article:
    Certain external monitors and LCD displays: Certain displays may emit harmonic interference, especially in the 2.4GHz band between channels 11 and 14. This interference may be at its worst if you have a portable computer with the lid closed and an external monitor connected to it. Try changing your access point to use 5 Ghz or a lower 2.4 GHz channel.
    http://support.apple.com/kb/HT1365

  • My Macbook Pro 15-inch with retina display crashes sometimes when connected to an external monitor

    My almost-new Macbook Pro 15-inch with retina display goes black and shuts down sometimes when connected to my external monitor. (The first time it did this was when connected to a projector.) They have replaced the motherboard but it still happens sometimes. The computer and monitor both come back on after a few seconds.

    Welcome to Apple Support Communities
    To mirror your Mac's display onto your TV, press Command and F1 keys. Read > http://support.apple.com/kb/HT5019

  • How can my iMac support 2560x1080 external monitor (LG 29EA93)

    How can my iMac support 2560x1080 external monitor (LG 29EA93)?
    Please, help on this issue?
    iMac 2012 Late
    NVIDIA GeForce GT 640M 512MB
    OS X 10.8.5 (12F37)

    Thanks for your prompt  answer.   
    I still have problems and I don't know why.

  • Can't sign in on external monitor with MBP after Yosemite upgrade

    After Yosemite upgrade, when I turn on my MBP, I can't sign in using external monitor with MBP, always could before Yosemite.  Blurred image of my wallpaper shows on monitor, can move arrow on external screen but sign-in only shows up on my computer screen, with no arrow.  Since there is no arrow on the computer screen, and no sign in box on the external monitor, I have to unplug the external video to sign in on the computer, then plug in the monitor again.  Any ideas?

    NOWEK,
    Thanks for this suggestion, but so far no joy. I have zapped the PRAM, jammed the Frabitz and smashed the Gafrogsnicker, all to no avail. When the MBP restarts I get a blurred image (extreme "vibrancy") on the external monitor, but no images of the login accounts to choose from or the other options. However, on the MBP screen I get all that. The keyboard and mouse respond, but just doesn't display on the external monitor. This is of interest to me because I have the MBP down in a credenza with other related gear and the external monitor and keyboard up on my desk. It's true I don't have to do this often, but still, it just started this aggravation with Yosemite. Thanks for trying to help.

  • Can I close my MBA while running an external monitor?

    I'd like to drive a 27" external monitor, using a bluetooth mouse and keyboard. Can I do this and close the laptop? Macbook Air or Macbook Pro?
    Thanks for any help.

    Yes, it's called Clamshell mode.  Here are the rules:
    http://support.apple.com/kb/HT3131
    Regards,
    Captfred

  • What is the best method to connect Gateway FPD2185W External Monitor

    Hello,
    I just bought a new Macbook. I would like to connect it to my larger Gateway FPD2185W external monitor. The monitor is maybe three years old, and has VGA, component, S-Video, and DVI inputs. Which type of connection would work best? I have a mini-DVI to VGA connector from Apple, but the display doesn't look the greatest. I'm still new to using the MacBook, so help would be appreciated.
    Thanks!

    There are some settings on the monitor that might be affecting how it looks when running from VGA. There should be a "tuning" function, also known as clock phase adjustment. There is an AUTO button located on the side of the monitor. Press it and see if it helps the picture quality. Also under the Video Adjust menu are settings for Sharpness and Noise Reduction. Those settings can often interfere with good picture quality, so you might try playing with them as well.
    Of course, you could always switch to the DVI input for the best image quality, but that would require buying another adapter from Apple and also a DVI cable if the monitor didn't already come with one.

  • Can't see timeline on external monitor?

    This may end up being something painfully obvious that I missed - in that case, sorry in advance. =)
    I can't see the timeline. The setup is as follows: Firewire DV to camera>Svideo out of camera to external monitor.
    AV settings: device control preset firewire ntsc, video playback Apple Firewire NTSC. AV Devices: Apple Firewire NTSC (mirror on desktop).
    Under view menu: External video> all frames
    Video playback: Apple Firewire NTSC.
    The camera is in VCR mode. I can control it from the log and capture window, so all connections are working. But the timeline will not show.
    When the camera is in camera mode, I can see the number display on my external monitor.
    Any idea where the problem lies here?
    Thanks in advance.
    Message was edited by: editgrrl
    Message was edited by: editgrrl

    General
    720x480 NTSC DV
    Pixel aspect ratio ntsc- ccir 601/dv
    field dominance - lower
    compressor dv.dvcpro-ntsc
    Video Processing
    Render in 8-bit YUV
    Timeline options
    track display:
    show keyframe options
    show audio waveforms
    show through edits
    clip keyframes not checked but all items under it are
    Render and playback
    checked: filters , frame blending for speed, motion blur
    render- frame rate and resolution 100%
    Message was edited by: editgrrl

  • Can I have a dedicated external monitor in Premiere CS5/CS5.5 using two nVidia GPUs?

    Hi there one and all.
    I have a new Windows 7 64bit system and I am trying to work out if I can use my 2nd graphics card in a way to give me a dedicated external monitor output when using Premiere CS5.5? (and After Effects too if thats possible???)
    My cards I have are the nVidia MSI GTX 470 and I have the choice of either my old nVidia 8800GT or old nVidia Quadro FX3700.
    I can hook up 4 monitors as a desktop no problem, but I do not know if or how it is possible to display my Premiere timeline on the external monitor as a dedicated connection? If not do I maybe need something like the Black Magic Intensity/Shuttle card or Matrox Mini?
    Any help would be very greatly appreciated.
    Thanks - Bradley

    Thanks Harm for such a quick response! much appreciated.
    I see you said a GTX 450 would work to give the dedicated external monitor, does this mean that my poor old 8800GT has finally dried up in terms of helping my system or is it possible to use this card to provide a source monitor for Premiere?
    With regards to the setting up of the 2nd card to not use the Hardware MPE, is this set from within premiere?
    Thanks again!
    Brad

  • Connect Macbook to external monitor

    Hello,
    I am currently using this macbook without an external monitor. However, I find it more and more unpleasant working with a small at home. So I have bought a Mini-Display-Port to HDMI Adapter and a HDMI-cable to connect the macbook to my Samsung 16:9 full-hd monitor.
    The problem: on my monitor I don't see a full screen display of what's happening on my macbook. So there I giant black rectangles around the display. Also, the display on my monitor is rather blurry and looks totally different from what I am seeing on my macbook.
    Does anyone know how I can solve this problem? I would really want to be able to work on a bigger screen, 24'', instead of photoshopping and stuff on a 13'' screen every day.
    Thanks!
    Thomas

    Apple's MacBook lines includes a form of digital copy protection that will prevent protected media, such as DRM-infused iTunes movies, from playing back on devices that aren't compliant with the new priority protection measures.
    The Intel-developed technology is called High-bandwidth Digital Content Protection (HDCP) and aims to prevent copying of digital audio and video content as it travels across a variety of display connectors, even if such copying is not in violation of fair use laws.
    Among the connectors supported by the technology are the Mini DisplayPort found on Apple's latest MacBook, MacBook Pro, and MacBook Air, in addition to others such as Digital Visual Interface (DVI), High-Definition Multimedia Interface (HDMI), Gigabit Video Interface (GVIF), and Unified Display Interface (UDI).
    Apple has apparently acquired a license for the technology and is now using it across its DisplayPort-enabled MacBook lines to to prevent transmission of purchased iTunes content (and some DVDs) to devices that don't include support for HDCP.

  • How can I connect an old external FDD Model# M0130 ?

    I have an original Macintosh 128k with an external FDD DB-19 connection. Now I have 400k diskettes and I would like to get the files from these diskettes. Is there a way to connect this old External FDD that has an db-19 connection to a Quadra 650 or Powerpc 7600 so that I can get the files from the diskettes.
    Or is there another way to be able to access these 400k diskettes from a Quadra 650 or PowerPc 7600.

    400 KB diskettes are physically readable in any Apple 800 KB or combination 800KB/1.44 MB diskette drive. 400 KB diskettes are double density (2D or 2DD) media, but are written one one side only.
    Support for 400 KB MFS diskettes was removed from the System Software at System 8.0, when HFS+ Extended was first introduced (but not made active until 8.1).
    So you need an older Mac, like your Quadra 650, running Mac OS before Mac OS 8.
    Do not try to fool the drive by using HD media -- the oxide is different, and the data will decay and become unreadable in a matter of a few minutes. Both types of diskettes are still available from the catalogs of major office supply retailers.

Maybe you are looking for

  • Touch on non-primary external monitor controlling primary external monitor

    SP3i5 connected to two external touch monitors (AcerT232HLs) via minidisplay on dock to hdmi on monitor2 and minidsply to hdmi on monitor3 and usb3s from dock to each monitor.  SP3 is monitor1. Displays work fine.  Touch works fine. HOWEVER, touch on

  • SQL Query execution with LISTAGG

    Hello, I am trying to get some data using LISTAGG functionality. I have below query with works fine with the table, but not with the rowsource which is based on same table. SELECT COL1,LISTAGG(COL3, ',') WITHIN GROUP (ORDER BY COL2) AS fieldName FROM

  • How do I change language-specific font fallback preferences?

    My MacBook's default fonts for viewing content in the Malayalam script/language seem to be Malayalam MN and Malayalam Sangam MN -- not surprisingly, since those are the default Malayalam fonts that come with the OS.  However, both of those fonts are

  • Response.sendRedirect doesn't work with Internet Explorer

    I do posts like advised here: http://www.theserverside.com/tt/articles/article.tss?l=RedirectAfterPost. GET-POST-REDIRECT-GET. Now I have a problem when do redirecting to the same page in Internet Explorer. It works good with Mozilla Firefox but not

  • Mass Creation of Company Code

    Hi, I am trying to upload 300 company code from another system into SAP. I looked into BAPI but find only COMPANYCODE_GETLIST. I would appreciate if anyone can tell me if there is anyone can tell me if there is any other way I can mass create Company