Can MDM installed along with CCM 2.0

Hi,
We have SRM Demo server, where currently we installed CCM. Can we install MDM along with CCM or is it mandatory to uninstall CCM before we install MDM. Please advise on this.
Regards
G GL

Hi,
You can play with several & different catalogs in SRM, so you can have CCM in your SRM system and also access to an SRM-MDM catalog.
I hope this helps
Best regards

Similar Messages

  • MAC PRO (Early 2008) RAID CARD ISSUE - SYSTEM FREEZEHello (hopefully someone can shed some light on my issue)  I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i m

    Hello (hopefully someone can shed some light on my issue)
    I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i made a regular drive)
    a while ago i had to replace the RAID card battery, so i did this, over a year later the same thing happened again, but as previous just left it and the system seemed fine for ages, until last night i was working in PHOTOSHOP and everything just froze and the screen kind of appeared GREEN, could not do a single thing. So restarted the mac, this time grey screen for ages and a message appeared, (macs version of blue screen) (see attached).
    I restarted the machine and this time a flashing question mark folder!
    could not do a thing.
    so i found my copy of snow leopard and got the computer to run this and at least launch the DISK UTILITY and (Interestingly in the drop down menu RAID UTILITY was also in the menu) but it did not matter which utility i used the (RAID or DISK) neither could see any of drives, just the dvd drive.
    so looked around on you tube and various forums and discovered if i take out the RAID CARD and re-plug the main lead from the RAID card back in to the LOGIC BOARD I would be reverting the MAC to a normal regular non-RAID computer.
    After performing this HARDWARE task and inserting all three HDD, and running the DISK utility from the drop down menu via the SNOW LEOPARD disc.
    (interestingly since the RAID card had been removed the RAID UTILITY  from the drop down menu no longer appeared). running disk utility I can now only see the regular (spare) hdd and DVD Drive, but the two RAID HDD , again, still do not show up DISK UTILITY?
    O.K. so i could chuck out the RAID card (AND RAID HDD) and just go with a regular set-up, and run a back restore from Time Machine on a NEW hdd purchased.
    but what is wrong with the RAID, is the card at fault or are both HDD used for the RAID knackered? can i perform any tests, to see whats what?
    thanks for your help in advanced.

    hello people, the issue was in fact the GRAPHICS card nothing to do with the HDD or RAID system ( although this did cause issues with the RAID system it basically lost its way) below is my replay to another similar  problem some one else had!
    working in photoshop and then everything stopped working and the lot froze! only option was to force shutdown (via button).
    and try to restart, hoping all was fine, this was not the case :-(
    I had the added issue of the RAID card system, that i have, this was confused to say the lease and would not behave or work, causing the start up to hang.
    so i thought the HDD must be bust and the root cause. ( but soon learnt it was not the cause )
    ...bought a new HDD removed the RAID card and replugged the cable from RAID card into LOGIC board, ( making the computer act like any normal non-RAID system). I managed to install the OSX, using the snow leopard disk way. once the mac was running, i started to notice the screen would flicker and started to see 'artefacts'. so i started to reveal my symptoms to the web and forums and soon discovered that my graphics card could be the issue all along?.
    (nvidia geforce 8800gt 2x dvi).
    I read up on that a fix, could be either A. reply the thermal paste, as the card could be over heating or B. stick the card in the oven trick.
    Tried option A. first and nothing still issues, so last night took the plunge carried out option B. and ta da it worked! i even managed to run
    from my new HDD my lasted install OS X, absolutely fine. I then thought, maybe i could repair my RAID so replugged all the HARDWARD back in and
    carried out a disk repair and disk permissions on drives( took a small amount of time), via the SNOW LEOPARD disc - (Disk utilities) and this worked and now have my system working as it was just over 6 days ago.
    what was the cost to get this?  bought a new hdd so 40.00gbp and thermal paste and cleaner kit ( your still need to do this ) search video card trick on you tube.
    and renew thermal paste, approx 15.00gbp, technically i don't need the new HDD, but it was all part of the trial and error way i went. ( i do have extra storage as a result!)"

  • HT4199 I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need a

    I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need advice.

    What type network is yu router set up for? The 4G iPod can only connect and see 2.4 GHZ networl like B, G and the 2,4 GHz N. There is also a 5 GHz N but the iPod will not even seethat network.
    See:
    iOS: Troubleshooting Wi-Fi networks and connections
    iOS: Recommended settings for Wi-Fi routers and access points

  • I download autocad 2010 with crack, how can i install it with crack coz i can't find where to paste the crack file? not like windows just go to drive c, progarms and click the installed folder and you can copy and paste the crack file.

    i download autocad 2010 with crack, how can i install it with crack coz i can't find where to paste the crack file? not like windows just go to drive c, progarms and click the installed folder and you can copy and paste the crack file.
    please help me..
    thanks

    No one here will help you.
    You should definitely ask your question in this forum:
    http://forums.autodesk.com/t5/AutoCAD-2010/bd-p/360

  • Trying to install Abode CS4 design standard Upgrade version. How can I install this with out having to install all my previous versions?  Thanks Mario

    Trying to install Abode CS4 design standard Upgrade version.
    How can I install this with out having to install all my previous versions?
    Thanks
    Mario

    You simply install it and input the required serials, including one of a previous product when asked for it.
    Download CS4 products
    Mylenium

  • How can i install shockwave with auto updates disabled?

    how can i install shockwave with auto updates disabled?
    i need to push out shockwave to all our machines and i need to have autoupdates disabled? whats the trick?

    I ran with native io enabled and now i need to see how things happen with native io disabled.I am trying to understand the various aspects of the server.
    Can you help me? How to set the default queue and application specific queues , and oofcourse socket readers in the case native performance packs are not used?
    Please, I will be very grateful.

  • Can't install WinXP32bits with Pci-e

    Hi, i have a MSI K8N Neo3-F(601-7135-010) mainboarth, with an AMD Sempron 64(754) 3000+, VGA ASUS 6600GT 128Mb Pci-e
    and all other normal things. This is the new things and I can't install WinXp with the Pci-e. I say this 'cause i've tried with an AGP VGA card and have no problem with the installation of WinXp. I've searched for a solution but nothing....
    I hope you can help....
    Tks.

    Quote from: joelsubtil on 29-May-06, 01:21:03
    I've checked and Pciex is selected...
    I've tried with a linux OS version and does the some thing, but the error that appears is relationed with the display controller.
    I'm starting to think that that is really the problem.
    why cant install? what you get? mobo dont have known problems with any PCI-E for now. probably your problem is coused by your PSU. AGP VGA which you are tried guess need less power that your ASSUS. can you give as more details about your system including PSU details? and more details about "cant install XP" what happed any msg ? just lockup? reboot?shutdown directly? using 10 of the same mobos with Galaxy 6600GE(GDDR-3) PCI-E modded to GT version. dont have any probs. possible reason is weak PSU at 1st look for now. your PC spec will be requred.

  • I can't install acrobat with my license key

    I can't install acrobat with my license key, but use it to install photoshop and illustrator is ok.
    what should i do next?
    how do i contact with technical team?

    What system are you on?
    iOS 10.8.3
    What version orf Acrobat?
    7.0.0.324
    Are there otehr versions of Adobe products already on teh system?
    Photoshop
    Illustrator
    Adobe Reader
    Flash
    After Effect
    Bridge
    Are there any specific error messages?
    No, it just said my license is wrong, but in other adobe products is OK.
    This license is supplied by my college, each student has their own unique license key.
    But only me has this problem.
    You need to provide more details.

  • If i buy parallels can i install it with boot camp?

    So yeah If i buy parallels can i install it with boot camp?

    bootcamp is a bootloader
    a setup tool for osx
    and a zip file with tested windows drivers and programs for the apple hardware
    one use the setup tool to make some of the apple hd windows filesystem
    one install windows on the space and the bootloader let you hold down option key to boot into what you want to use today
    parallels is a virtual machine as in running windows under osx in a window if one wish
    parallels can as the only virtual machine that I know of access a bootcamp patition directly where other virtual machines just keep the other hd as a file
    when parallels use the windows partition it will like other virtual machines not be able to access the video card for 3d games though that is only for real bootcamp
    users who don't need to play fancy 3d games on windows will have an easier time using a virtual machine like parallels or virtualbox(free) or wmware
    they require much much much less tech knowlege to install and dont have driver issues like bootcamp can
    both a virtual machine and bootcamp require you to bring your own windows and valid windows key

  • Can I Install PSE10 with existing PSE9

    Can I install PSE10 when I already have PSE9 installed on computer. PSE9 gives a lot of tool trouble and I hope PSE10 is better. I will keep and use the best one. Thanks.
    My Computer:   Win 7, 64 bit, 6mb ram

    Sure.  To quote from Barbara Brundage's excellent PSE 10 the missing manual:  "If you have a previous version of Elements on your computer, you don't need to remove it before installing Elements 10.  All versions of Elements run completely separately, so you can keep older versions if you want."
    I installed PSE 10 along with PSE 8, and both function OK together (just not at the same time, however).

  • What is Fast1 and why is it installing along with Adobe Flash?

    I just updated Adobe Flash and when that was done, I found that File1 Package Manager had also installed and had launched and was in turn attempting to update other software.  Pressing "cancel" did nothing, and when I went into the Task Manager (using ctl-alt-del) and clicked on "end process" I got an error message that I did not have authorization to end the process.  Eventually it ended on its own, but WTF?  It looks like malware: downloading, installing, and running all without my knowledge or consent. A full system scan with Microsoft Security Essentials, but I'm not sure if that would detect malware.
    This seems to be something new, i.e. when I Googled it, there was almost nothing out there about it.  I did find one forum on which mine was the first question, and several other people responded that they had the same experience.
    One of two things would seem to be going on.  Either the adobe.com web site has been hacked and malware is riding in on product updates, or the Adobe corporation has agreed to install Fast1 along with its products and just isn't telling its customers.  (I was very carteful to watch for boxes to uncheck as I went through the update.  There weren't any.)

    Question: What is file 1 package manager ?
    A: “File1 Package Manager (Ant App service)  is a program developed by Helios Technologies. The software adds a background controller service that is set to automatically run. The specfic verbage from the file 1 wesite ( http://www.file1.com/ ) states---
    "File1.com Package Manager is a handy tool for managing all your programs  within one space. It provides a user with a list of programs already  installed and those available for installation. With Package Manager you  can easily upgrade, install or uninstall all of our proposed software  on the site. File1.com is a freeware guide that provides the best free software which  is absolutely safe. It means no additional programs you do not know  about, no malware, spyware, or viruses. "
    Q: Why is file 1  installing with adobe flash?
    A: It shouldn't if you are downloading and installing manually from the adobe.com. If you download adobe from a third party website this could be the reason. If you are on a shared computer, it may have been downloaded to your computer to obtain many of the free software it offers. If this is the case File1 may have auto updated your adobe flash
    Extras:
    You can uninstall File1 Package Manager from your computer by using the Add/Remove Program feature in the Window's Control Panel.
    A.   
    A.    A. On the Start menu (for Windows 8, right-click the screen's bottom-left corner), click Control Panel, and then, under Programs, do one of the following:
    1.    Windows Vista/7/8: Click Uninstall a Program
    2.    Windows XP: Click Add or Remove Programs.
    B.  When you find the program File1 Package Manager, click it, and then do one of the following:                                                                    
    1.Windows Vista/7/8: Click Uninstall. 
          2.Windows XP: Click the Remove or Change/Remove tab (tothe right of the program).

  • How can I play along with a MIDI sequence in Mainstage?

    Hi folks,
    I have some live performances where I would like to play along with MIDI sequences.  I've been using Mainstage and software instruments, but can't for the life of me figure out how do play along with MIDI sequences.  There's a nice plugin (whose name escapes me at the moment) that lets you play along with looped audio tracks....but a MIDI file would be better for my purposes.  Is there a way to do this?
    Thanks in advance,
    -Mike Kaplan

    Hi
    Not directly within Mainstage.... there could be workarounds using 3rd party applications slaved to MS, but it would be a complete pita (compared to working with scripts to iTunes Playlists or just bouncing the MIDI files to audio).
    CCT

  • Can I Install Tiger with an exterinal USB DVD Drive??

    Hi,
    I've accuired a couple iMacs that are currently running Mac OS 9, but are fast enough to run Tiger. The problem is they only have built in CD drives. Rather than going out to find several internal iMac DVD drives, could I buy one exterinal USB DVD drive to install Tiger?
    Thanks!

    What happens if the firmware isn't updated?
    The display may stop working, even for OS 9. It is not easy to fix.
    I just installed 10.2 on one of them and it seems to be working. Should I uninstall it and upgrade the firmware and start over?
    Check the "Boot ROM version" with System profiler. If the firmware is updated it will be 4.1.9
    It is not necessary to remove OSX to install the updates if OS 9 is still on the hard drive. If not, and the OS 9 drivers are there, OS 9 can be installed without affecting OSX.
    The update won't install if it is not needed.

  • Help on installing Lightroom 5 on two computers... I have used it on a PC, but now I have bought a MacBook Pro, can I install it with the same license? If not, can I delete it on the PC and use it on Mac instead??

    Hi all,
    I just read, that you can't install lightroom 5 on the same license on two different platforms because of different services provided.
    Is it possible to delete the PC-version and continue solely with the MacVersion!?
    kind regards, and thanks in advance
    Andreas

    Unless things have changed your Lightroom purchase can be used on two PC's, 2 Macs, or one of each.  You just need to download the Mac version and install it on the Mac.  You should not have to do anything with the PC installation.
    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • How many laptops can I install on with only one lightroom 6 license? (not cc version)

    I read from somewhere that one creative cloud  account can be used on two different devices, but what about the lightroom 6 version?
    If I pay $149 for lightroom 6, how many laptops can I install on? I now have one windows laptop and one mac.
    Thanks for helping.

    I selected yours as the correct answer because of the webpage you provided, but I cannot understand that what "only use it on one computer at a time".
    If the software is for offline use, how does it know if I'm running it on another computer?

Maybe you are looking for

  • No accounting document generated while new condition type is added

    Hi I added a new condition type to the pricing procedure. While creating the invoice if i try giving a value to the new condition type then i get the message "No accounting document generated", but when i leave it as blank then there is no problem wi

  • Previous data in the field is not comming when we press space bar

    Hi Experts, I am faceing 1 issue in module pool programming.i have 10 input fields in a perticular screen, when i am pressing Space Key in a perticular input field , for some fields the previous data what i field last time is comming, but for some fi

  • How can i log on as an administrator?

    how can i log on as an administrator?

  • Problem with activation of integration model

    Hi, I am facing a problem. Whenever I activate the integration model for vendors, a "CIF_LOAD" window appears with message "Should interval be created" with YES and NO option. Why does this window appears? After clicking on NO option the message "Det

  • How to add Web Service Policy?

    Hi ; My project calling a web service. This web services secured with username&password and i don't call it correctly. I need to pass this identiy information to web service. How to adding this policy information?