Can ME 3600x enable oam on vlan not EVC ?

I see this document http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/release/15.2_4_S/configuration/guide/swoam.html.
Switch(config)# ethernet cfm domain abc level 3
Switch(config-ecfm)# service test vlan 5
but I not see vlan command:
me3600-1(config-ecfm)#ser test ?
  evc   Specify EVC
  port  DOWN service direction with no vlan association
me3600-1(config-ecfm)#
so I used the same IOS:
me3600-1#sho ver
Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 15.2(4)S, RELEASE SOFTWARE (fc1)
Can ME 3600x enable oam on vlan not EVC ?
Thank you very much.

Thanks Cadet, but unfortunately the VLAN Database is not available and neither is the the VTP; which is the reason for this post.
I switched to enable mode with no success and if u check the commands attachment, you'll see that there are no VLAN and VTP exec commands. Was there any bug in this version of IOS? And I can't downgrade it to 12.2 or upgrade to 12.4.
Thanks for your assistance in this.

Similar Messages

  • Logout does not work in OIM after enabling OAM SSO

    We have installed a webgate to protect xlWebApp in OIM. Once the SSO is enabled, the logout does not work in the OIM user interface. How to solve this issue?
    Metalink has a solution where we need to add document.location="http://host:port/access/oblix/lang/en-us/logout.html"; in xlWebApp\tiles\tjspLogoffTiles.jsp. This is the logout URL of OAM. Is there any other way so we can have a logout page in the OIM application/server itself?
    Thanks.

    Kevin,
    I did what you suggested and initially it looked like it is working but there is slight issue. When I click Logout, it redirects to the logout screen. After logging out when I try to access xlWebApp it prompts for the login (i am using basic authentication). If I cancel it and again try to access xlWebApp, it lets me in without any prompt. This issue is in IE only but not in Firefox. Not sure what's the issue.
    Btw, to make the logout screen work, I had to unprotect the following with None Authentication:
    - /xlWebApp/pages/logout.html      (logout page)
    - /xlWebApp/images
    - /xlWebApp/css/Xellerate.css
    - /xlWebApp/css/style.css
    Thanks.
    Edited by: user504421 on Mar 16, 2009 9:52 AM
    Edited by: user504421 on Mar 16, 2009 10:00 AM
    Edited by: user504421 on Mar 16, 2009 10:01 AM

  • How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

    How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

    What OS are you running.. this is usually only a problem in Mavericks.
    If so I recommend you mount the hard disk manually..
    Use Go, Connect to server.
    Type in the IP address if static.. eg
    AFP://10.0.1.1
    Or the name.. but you will have issues unless the name is short, no spaces and pure alphanumeric.. if you are using bad names.. fix it by a full factory reset in airport utility and give it all names that comply to the above.
    Type in
    AFP://TCname.local Where TCname is replaced with the actual name.
    You will be asked for the password the first time which is public unless you changed it.. please remember to save this in the keychain.
    Copy files then to a new directory you create on the TC.. do not place files inside the TM sparsebundle. Nor directly under the main directory.

  • I can't drag files to my iPhone 5 from iTunes. I get an alert that says files can't be copied because I have iTunes Match enabled but I do not have iTunes Match that I know of

    I can't drag files from iTunes to my iphone 5, I get an alert that says files can't be copied because I have iTunes Match enabled but I do not have iTunes M

    Correct.  When you purchase devices, they would have stated the OS they needed to work, on the box.  This can be overlooked, but it is very important to check when purchasing. 
    You current OS, is so old, that they technology build into the new devices, is not something your OS understands.  It didn't exist when your OS was created, and therefore you need to upgrade the OS to work with the newer technology of these devices.
    10.6 software is not downloadable.  You must purchase a DVD disc.  You can order it from the on-line apple store
    - http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard.

  • I use gmail , it says i can't access it because browsers cookies are disabled , THEY ARE NOT. I go into tools and options and cookies are enabled. I do not have this problem when i switch to internet explorer.

    i use gmail , it says i can't access it because browsers cookies are disabled , THEY ARE NOT. I go into tools and options and cookies are enabled. I do not have this problem when i switch to internet explorer. If the issue is not resolved i will switch back to internet explorer . any help you can give would be appreciated.

    refer to the
    * [[Websites say cookies are blocked - Unblock them]]
    * [[JavaScript settings and preferences for interactive web pages]]
    * [[Settings for fonts, languages, pop-ups, images and JavaScript]]
    articles
    Thank you!

  • Ipad 4 my icloud account locked so now is not enabled. Can you help me activate without icloud not logging.

    ipad 4 my icloud account locked so now is not enabled. Can you help me activate without icloud not logging.

    If none of the following methods will work for you If you forgot your Apple ID password then contact Apple ID support: Apple ID: Contacting Apple for help with Apple ID account security

  • Cisco 1941 Router-on-a-Stick w/ 11VLANs trunked to a Cisco 2960: Can Ping a device in another VLAN, that device cannot ping back

    Cisco 1941 Router-on-a-Stick w/ 11VLANs trunked to a Cisco 2960: From the Switch I can Ping a device in another VLAN, that device cannot ping back. Some devices can ping devices in other VLANs and the device in the other VLAN can successfully return the Ping. Have a look at the attached diagram.
    Router Config:
    show run
    Building configuration...
    Current configuration : 7224 bytes
    ! Last configuration change at 09:05:48 EDT Wed Aug 6 2014
    version 15.2
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname ROUTER
    boot-start-marker
    boot-end-marker
    no aaa new-model
    clock timezone EDT -8 0
    ip cef
    ip name-server 8.8.8.8
    no ipv6 cef
    multilink bundle-name authenticated
    license udi pid CISCO1941/K9
    object-group network Net_Obj_Group1 
     description This network group allows all 10.0.0.0 and Email Forwarder server through to the Plt PCs
     205.191.0.0 255.255.0.0
     10.0.0.0 255.0.0.0
    object-group network Net_Obj_Group2 
     description This Network Group includes the Host IPs allowed through the Plant Router
     host 10.194.28.23
     host 10.194.28.25
     host 10.194.28.26
     host 10.194.28.27
     host 10.194.28.28
     host 10.194.28.29
     host 10.194.28.37
     host 10.194.28.39
     host 10.194.28.40
     host 10.194.28.70
     host 10.194.28.130
     host 10.194.28.131
     host 10.194.28.132
     host 10.194.28.133
     host 10.194.28.134
     host 10.194.28.135
     host 10.194.28.136
     host 10.194.28.137
     host 10.194.28.138
     host 10.194.28.139
     host 10.194.28.140
     host 10.194.28.141
    interface Embedded-Service-Engine0/0
     no ip address
     shutdown
    interface GigabitEthernet0/0
     description Port Ge0/0 to IT Enterprise network Switch GE1/0/38
     ip address 10.194.28.111 255.255.255.0
     ip access-group 105 in
     ip access-group 106 out
     ip nat outside
     ip virtual-reassembly in
     shutdown
     duplex full
     speed auto
     no mop enabled
    interface GigabitEthernet0/1
     description Port to Plant PCN-K/L24 Sw1 Port 0/24
     no ip address
     duplex auto
     speed auto
     no mop enabled
    interface GigabitEthernet0/1.102
     description Port to VLAN 102
     encapsulation dot1Q 102
     ip address 192.168.102.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
    interface GigabitEthernet0/1.104
     description Port to VLAN 104
     encapsulation dot1Q 104
     ip address 192.168.104.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
    interface GigabitEthernet0/1.105
     description Port to VLAN 105
     encapsulation dot1Q 105
     ip address 192.168.105.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
    interface GigabitEthernet0/1.106
     description Port to VLAN 106
     encapsulation dot1Q 106
     ip address 192.168.106.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
    interface GigabitEthernet0/1.107
     description Port to VLAN 107
     encapsulation dot1Q 107
     ip address 192.168.107.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
    interface GigabitEthernet0/1.111
     description Port to VLAN 111
     encapsulation dot1Q 111
     ip address 192.168.111.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
    interface GigabitEthernet0/1.117
     description Port to VLAN 117
     encapsulation dot1Q 117
     ip address 192.168.117.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
    interface GigabitEthernet0/1.121
     description Port to VLAN 121
     encapsulation dot1Q 121
     ip address 192.168.121.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
    interface GigabitEthernet0/1.125
     description Port to VLAN 125
     encapsulation dot1Q 125
     ip address 192.168.125.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
    interface GigabitEthernet0/1.150
     description Port to to VLAN 150
     encapsulation dot1Q 150
     ip address 192.168.150.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
    interface GigabitEthernet0/1.999
     description Port to VLAN 999
     encapsulation dot1Q 999
     ip address 192.168.0.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
    ip forward-protocol nd
    ip http server
    no ip http secure-server
    ip nat inside source static 192.168.102.201 10.194.28.23
    ip nat inside source static 192.168.121.201 10.194.28.25
    ip nat inside source static 192.168.106.251 10.194.28.26
    ip nat inside source static 192.168.107.245 10.194.28.27
    ip nat inside source static 192.168.102.251 10.194.28.28
    ip nat inside source static 192.168.150.201 10.194.28.29
    ip nat inside source static 192.168.107.179 10.194.28.37
    ip nat inside source static 192.168.111.201 10.194.28.39
    ip nat inside source static 192.168.105.201 10.194.28.40
    ip nat inside source static 192.168.106.21 10.194.28.70
    ip nat inside source static 192.168.107.146 10.194.28.130
    ip nat inside source static 192.168.107.156 10.194.28.131
    ip nat inside source static 192.168.107.161 10.194.28.132
    ip nat inside source static 192.168.107.181 10.194.28.133
    ip nat inside source static 192.168.107.191 10.194.28.134
    ip nat inside source static 192.168.106.202 10.194.28.135
    ip nat inside source static 192.168.106.212 10.194.28.136
    ip nat inside source static 192.168.117.190 10.194.28.137
    ip nat inside source static 192.168.117.100 10.194.28.138
    ip nat inside source static 192.168.106.242 10.194.28.139
    ip nat inside source static 192.168.125.100 10.194.28.140
    ip nat inside source static 192.168.125.99 10.194.28.141
    ip nat outside source static 10.194.28.23 10.194.28.23
    ip nat outside source static 10.194.28.25 10.194.28.25
    ip nat outside source static 10.194.28.26 10.194.28.26
    ip nat outside source static 10.194.28.27 10.194.28.27
    ip nat outside source static 10.194.28.28 10.194.28.28
    ip nat outside source static 10.194.28.29 10.194.28.29
    ip nat outside source static 10.194.28.37 10.194.28.37
    ip nat outside source static 10.194.28.39 10.194.28.39
    ip nat outside source static 10.194.28.40 10.194.28.40
    ip nat outside source static 10.194.28.70 10.194.28.70
    ip nat outside source static 10.194.28.130 10.194.28.130
    ip nat outside source static 10.194.28.131 10.194.28.131
    ip nat outside source static 10.194.28.132 10.194.28.132
    ip nat outside source static 10.194.28.133 10.194.28.133
    ip nat outside source static 10.194.28.134 10.194.28.134
    ip nat outside source static 10.194.28.135 10.194.28.135
    ip nat outside source static 10.194.28.136 10.194.28.136
    ip nat outside source static 10.194.28.137 10.194.28.137
    ip nat outside source static 10.194.28.138 10.194.28.138
    ip nat outside source static 10.194.28.139 10.194.28.139
    ip nat outside source static 10.194.28.140 10.194.28.140
    ip nat outside source static 10.194.28.141 10.194.28.141
    ip route 0.0.0.0 0.0.0.0 10.194.28.1
    access-list 105 permit ip object-group Net_Obj_Group1 object-group Net_Obj_Group2
    access-list 106 permit ip object-group Net_Obj_Group2 object-group Net_Obj_Group1
    dialer-list 1 protocol ip permit
    control-plane
    banner login ^CC
    Login banner for Plant Router #01^C
    banner motd ^CC
    MOTD Banner for Plant Router^C
    line con 0
     password XXXXXXXXX
     logging synchronous
     login
    line aux 0
    line 2
     no activation-character
     no exec
     transport preferred none
     transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
     stopbits 1
    line vty 0 4
     password XXXXXXXXX
     logging synchronous
     login
     transport input all
    scheduler allocate 20000 1000
    ntp server 10.199.100.92
    end
    Switch Config:
    sh ru
    Building configuration...
    Current configuration : 6513 bytes
    version 12.2
    no service pad
    service timestamps debug uptime
    service timestamps log datetime localtime show-timezone
    service password-encryption
    hostname K24Sw01
    boot-start-marker
    boot-end-marker
    no aaa new-model
    clock timezone EDT -5
    clock summer-time EDT recurring
    udld aggressive
    crypto pki trustpoint TP-self-signed-593746944
     enrollment selfsigned
     subject-name cn=IOS-Self-Signed-Certificate-593746944
     revocation-check none
     rsakeypair TP-self-signed-593746944
      4B58BCE9 44
      quit
    spanning-tree mode pvst
    spanning-tree extend system-id
    vlan internal allocation policy ascending
    interface FastEthernet0
     no ip address
    interface GigabitEthernet0/1
     description Trunk port for vlans 105, 111, 125 and 999 from K24Sw01 port Ge0/1 to P22Sw01 port Ge0/24
     switchport trunk allowed vlan 105,111,125,999
     switchport mode trunk
    interface GigabitEthernet0/2
     description Trunk port for vlans 150 and 999 from K24Sw01 port Ge0/2 to N25Sw01 port Ge0/26
     switchport trunk allowed vlan 150,999
     switchport mode trunk
    interface GigabitEthernet0/3
     description Trunk port for vlans 102, 104, 106, 107, 117 and 999 from K24Sw01 port Ge0/3 to K28Sw01 port Ge0/26
     switchport trunk allowed vlan 102,104,106,107,117,999
     switchport mode trunk
    interface GigabitEthernet0/4
     description Trunk port for vlans 102, 106, 107 and 999 from K24Sw01 port Ge0/4 to H23Sw01 port Ge0/26
     switchport trunk allowed vlan 102,106,107,999
     switchport mode trunk
    interface GigabitEthernet0/5
     description Trunk port for vlans 121, 125 and 999 from K24Sw01 port Ge0/5 to M21Sw01 port Ge0/24
     switchport trunk allowed vlan 121,125,999
     switchport mode trunk
    interface GigabitEthernet0/6
     description OPEN
     spanning-tree portfast
    interface GigabitEthernet0/7
     description OPEN
     spanning-tree portfast
    interface GigabitEthernet0/8
     description OPEN
     spanning-tree portfast
    interface GigabitEthernet0/9
     description OPEN
     spanning-tree portfast
    interface GigabitEthernet0/10
     description VLan 102 access port
     switchport access vlan 102
     spanning-tree portfast
    interface GigabitEthernet0/11
     description - VLan 104 access port
     switchport access vlan 104
     spanning-tree portfast
    interface GigabitEthernet0/12
     description - VLan 105 access port
     switchport access vlan 105
     spanning-tree portfast
    interface GigabitEthernet0/13
     description - VLan 106 access port
     switchport access vlan 106
     spanning-tree portfast
    interface GigabitEthernet0/14
     description - VLan 107 access port
     switchport access vlan 107
     spanning-tree portfast
    interface GigabitEthernet0/15
     description - VLan 111 access port
     switchport access vlan 111
     spanning-tree portfast
    interface GigabitEthernet0/16
     description - VLan 117 access port
     switchport access vlan 117
     spanning-tree portfast
    interface GigabitEthernet0/17
     description - VLan 121 access port
     switchport access vlan 121
     spanning-tree portfast
    interface GigabitEthernet0/18
     description - VLan 125 access port
     switchport access vlan 125
     spanning-tree portfast
    interface GigabitEthernet0/19
     description - VLan 150 access port
     switchport access vlan 150
     spanning-tree portfast
    interface GigabitEthernet0/20
     description - VLan 999 access port
     switchport access vlan 999
     spanning-tree portfast
    interface GigabitEthernet0/21
     description OPEN
     spanning-tree portfast
    interface GigabitEthernet0/22
     description OPEN
     spanning-tree portfast
    interface GigabitEthernet0/23
     description OPEN
     spanning-tree portfast
    interface GigabitEthernet0/24
     description From ROUTER Gw ge0/1
     switchport trunk allowed vlan 102,104-107,111,117,121,125,150,999
     switchport mode trunk
    interface GigabitEthernet0/25
    interface GigabitEthernet0/26
    interface Vlan1
     no ip address
     no ip route-cache
     shutdown
    interface Vlan102
     ip address 192.168.102.253 255.255.255.0
    interface Vlan104
     no ip address
     no ip route-cache
    interface Vlan105
     no ip address
     no ip route-cache
    interface Vlan106
     no ip address
     no ip route-cache
    interface Vlan107
     no ip address
     no ip route-cache
    interface Vlan111
     no ip address
     no ip route-cache
    interface Vlan117
     no ip address
     no ip route-cache
    interface Vlan121
     no ip address
     no ip route-cache
    interface Vlan125
     no ip address
     no ip route-cache
    interface Vlan150
     no ip address
     no ip route-cache
    interface Vlan999
     no ip address
     no ip route-cache
    ip default-gateway 192.168.102.1
    ip http server
    ip http secure-server
    snmp-server engineID local 00000009020000019634C2C0
    snmp-server community public RO
    snmp-server location 
    snmp-server contact 
    banner motd ^CCC ADMIN USE ONLY! ^C
    line con 0
     session-timeout 10 
     password xxxxxx
     logging synchronous
     login
     stopbits 1
    line vty 0 4
     session-timeout 10 
     password xxxxxxx
     login
    line vty 5 15
     session-timeout 10 
     password xxxxxxxx
     login
    ntp server 10.199.100.92
    end
    K24Sw01#

    HI Mark,
    Here is the my config:
    Create sub-interfaces, set 802.1Q trunking protocol and ip address on each sub-interface
    Router(config)#interface f0/0
    Router(config-if)#no shutdown
    (Note: The main interface f0/0 doesn’t need an IP address but it must be turned on)
    Router(config)#interface f0/0.10
    Router(config-subif)#encapsulation dot1q 10
    Router(config-subif)#ip address 192.168.10.1 255.255.255.0
    Router(config-subif)#interface f0/0.20
    Router(config-subif)#encapsulation dot11 20
    Router(config-subif)#ip address 192.168.20.1 255.255.255.0
    (Note: In the “encapsulation dot1q 10″ command, 10 is the VLAN ID this interface operates in)
    Configure VLAN
    Switch(config)#vlan 10
    Switch(config-vlan)#name SALES
    Switch(config-vlan)#vlan 20
    Switch(config-vlan)#name TECH
    Set ports to access mode & assign ports to VLAN
    Switch(config)#interface range fa0/1
    Switch(config-if)#no shutdown
    Switch(config-if)# switchport mode access
    Switch(config-if)# switchport access vlan 15
    Switch(config-if)#interface range fa0/3
    Switch(config-if)#no shutdown
    Switch(config-if)#switchport mode access
    Switch(config-if)# switchport access vlan 20
    Switch(config-if)#interface range fa0/5
    Switch(config-if)#no shutdown
    Switch(config-if)#switchport mode trunk
    1. Please check all your port are up.
    2. Check the config once again.
    3. Make sure the swicth and router connection port configured as trunk and it should be up.
    This config is working for me,
    Regards
    Dont forget to rate helpful posts.

  • Jumbo Frame - Enabling on a VLAN of CAT 6500 running IOS

    Jumbo frames needs to be enabled on one of the vlan interface on Cisco 6500 IOS Switch.
    =================================================================
    •1) Once enabled the mtu 9216 on the required vlan interface do we need to reload the switch to take effect (I believe that in some low end swicthes it needs a reload)
    •2) If we enable only one Vlan interface, how about the other vlan interfaces(about 200 are on this switch)? Do we need to specify mtu1500 on other vlan interfaces?
    I have read information at the following two links, but I still wish to reconfirm by asking the questions in this forum. Someone who has already implemented this may have gained more experience while implementing it on CAT 6500 IOS Switch.
    https://supportforums.cisco.com/message/963341#963341
    http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration_example09186a008010edab.shtml
    http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration_example09186a008010edab.shtml#backinfo1
    Thanks.
    Alphonse

    You do not need to reboot your 6500 after you enable jumbo frames, but it is good idea to do it during an outage window. You only need to reboot smaller switches i.e. 3560, 3750, etc...after enabling jumbo frames. On these switches you can only enable it globally.  Only enable jumbo frames for the vlans you need.  You usually need jumbo frames for vlans connecting to the storage systems.
    Good Luck

  • TS4036 How Can I re-enable my disabled from my Computer(the Ipad doesn't allow me any access to the Ipad)

    How can I re-enable a disabled Ipad from my computer?

    By not allowing enough time to reset, do you mean you have tried a reboot by holding both the power and home buttons until the apple logo appears, ignoring the red slider?  If so, are you able to power down just using the power button?  Does it then restart on its own?
    If you cannot get it to reboot, stay powered down, take it to an Apple store genius bar and have the technicians test it to see what is wrong...that is most likely a hardware issue.

  • I can not save any data to external hard drive from my mac pro. Is there anyone can help me in this regard?( note, when i first plug my ext. drive to mac i chose option to backup later)

    I can not save any data to external hard drive from my mac pro. Is there anyone can help me in this regard?( note, when i first plug my ext. drive to mac i chose option to backup later)

    The device may be formatted for Windows, as NTFS. The format is readable, but not natively writable on a Mac. To write to the device, you must either reformat it (erasing all the contents) or install third-party software to enable write access to NTFS.

  • I have installed ios7 on my iPad 4. After installation it asked me pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to ios6.

    I have installed ios7 on my iPad 4. After installation it asked me a pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to ios6. I asked Apple store & tech said to format it but I will lose all the data..!

    Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
    Thanks

  • Is there a way to stop iPhoto storing my photo stream photos on the mac hard drive when enabled? They have not been imported to my library. I have no photos saved on my MacBook Air yet 50gb of Hardrive space is taken up by photos.

    Is there a way to stop iPhoto storing my photo stream photos on the mac hard drive when enabled? They have not been imported to my library. Is there a way to stop iPhoto storing my photo stream photos on the mac hard drive when enabled? They have not been imported to my library. I have no photos saved on my MacBook Air yet 50gb of Hardrive space is taken up by photos. When I turn off photo stream on iCloud preferences the memory is freed up. I like to be able to access my icloud photo streams on
    my macbook but it has a small Hardrive and loosing that much space is annoying and it kind of voids the point of photo streams. Is there a way I can stop
    this ?

    Is there a way I can stop
    this ?
    No, Photo Stream is syncing with iCloud. The most recent 1000 photos in iCloud will be buffered on your mac, even if you do not import them to your photo library, if you enable My Photo Stream.
    See this link:   iCloud: Photo Stream FAQ
    iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.

  • HT204291 I have iOS 6.0 installed. Im trying to mirror a rented movie from ipad to TV via apple TV. I can hear the movie through TV but not picture (which is still on ipad)

    I have iOS 6.0 installed. Im trying to mirror a rented movie from ipad to TV via apple TV. I can hear the movie through TV but not picture (which is still on ipad)

    Restart you iPad http://support.apple.com/kb/HT1430
    Restart your Apple TV http://support.apple.com/kb/HT3180
    Make sure AirPlay Mirroring is enabled http://support.apple.com/kb/HT5209

  • Enable User task is not getting triggered

    Hi All
    We have a provisioning workflow configured. "Enable User" task is not getting triggered while the user is enabled in OIM. Can anyone give a clue as to how to get it triggerd? Rest all the tasks are fine (Create, Disable, Delete, and other custom tasks)
    Thanks,
    Vinay

    There is a OOTB scheduled Task "Enable After Start Date". once the user get enabled in OIM user profile. You have to run this task manually to have effect on corresponding RO for enablement. Else it will execute automatically as per scheduled time.
    if the version of OIM is 11.1.1.5. There is an issue. update patch BP02. for same
    --nayan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • I can open pdf files in emails, but not on websites. I have the new Reader.

    I can open pdf files in emails, but not on websites, as I was able to a couple of weeks ago. On websites I get the message, "Adobe Acrobat has crashed". I downloaded the new Adobe Reader and that didn't help. I don't have Adobe Acrobat, on Adobe Reader.

    Windows 7, Google Chrome and the most recent Adobe Reader (just downloaded the same day). The problem is with Google Chrome, as Fire Fox works fine. I tried enabling and disabling what would read pdf files in Chrome plugins and found that the only thing that worked was to disable adobe reader and enable chrome reader, which is the opposite of what was reccomended in answer to other adobe forum questions that were similar to mine.

Maybe you are looking for