Can ME be installed on AIX?

Hi,
I am new to ME. The installation guide is suggesting that ME cannot be installed on AIX. We don't have windows or HP or Linux in our environment. Please help me.
Thanks,

Hi Sharif,
I doubt anyone tried that, and me neither. So saying just in theory, it may be possible to deploy ME on AIX. But on your on risk, of course. What is the purpose of this? You know, there will be no support from SAP for such installation... You can try it just to play, I think
Anyway, to deploy SAP ME you need an SCA being prepared. It is done by installers which are supported only on mentioned platforms. So you may try to go through supported installation (anywhere on Windows/Linux/HP-UX) until you have the SCA, and try to deploy it. Again, this is all in theory. It may work, but what are you going to do further with that unsupported installation?
Regards
Anton

Similar Messages

Check "Problem: Oracle Database 10g Release 2 can only be installed in new

Hi All
Installing 10g software on AIX Box in /oracle/oraHome2,where oracle9i is already installed in /oracle/oraHome1 and oracle inventory is in /oracle/inventory
In product specific prerequisite screen I am getting the
check:Oracle Home incompatibilties is failed I am getting the error
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: Oracle9i Database 9.2.0.1.0
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g Release 2 can only be installed in a new Oracle Home
Recommendation: Choose a new Oracle Home for installing this product
though I am installing it in different oracle homes why i am getting this error?
Is it because 10g installation is picking the same oracle inventory /oracle/inventory
do i need to make different oracle inventory for different oracle homes???????plz confirm..is thats the reason i am getting this error??????
Thanks inadvance
Gagan

I figure out you are trying to install 10gR2 on top of an existing 9iR2 Oracle Home. This is corrected at the Path definition window. Most probably you just click on the <Next> and by default the 9iR2 Oracle Home was selected. You must define a new oracle home for the 10gR2 install.
~ Madrid

ETL and DAC clustering for high availaibility in OBIAPPS installed in AIX

Hello Gurus
Could you let me know how to configure teh clustering and failover for Informatica and DAC for obiapps 7963 installed in AIX 6.1 . We have license for HACMP cluster.
Any guide to help me out. I coudn't find it in obiapps deplyment guide.

Unlike BI the Informatica and DAC services are based on database. Assuming your database is up and running all the time can you tell me the scenario(s) to bring down these Informatica and DAC services?
If my assumptions are correct you wont have any?
I would suggest to make sure your database is up and running all the time so that Informatica and DAC are up and running.
More over you have to fix manually for any load issues and you wont get benefit from cluster.
Just in case you are going with Cluster then you need to take care of DAC refresh dates.. do you have any plan for the same?
Appreciate if you share about how you end up with this.
If I'm wring correct me, infact I too was waiting for responses for this post :)
Edited by: Srini VEERAVALLI on Dec 26, 2012 9:49 PM

How many times can you clean install leopard on the same computer?

How many times can you clean install leopard on the same computer? Will the leopard dvd run out of installations and not let you install anymore?

Hi colman Prez;
Now that the funny comments have been made, I have a serious question and that why are you worry about reinstalling Leopard with an Erase & Install which is what I take that you mean when you say clean install. In actually fact there is no such thing in OS X as a clean install.
I am curious because in all the years I have used OS X, I have yet to do an Erase & Install yet.
I know with Windows that they suggest reformatting and reinstalling at the drop of a hat but that isn't true with OS X.
Allan

Why can't I install Itunes on windows vista 64 bit?

Why can't I install Itunes on windows vista 64 bit? I have removed all apple software and repeated the reinstall many times but it fails. I get this complicated error mesage and then the installer rolls back and fails.

I get this complicated error mesage and then the installer rolls back and fails.
I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

Can not be installed link for windows7 64bit

Can not be installed link, I installed the first version, but later found that there are updates, updated the next update is unsuccessful, I deleted deleted unsuccessful, myself manually deleted.Download The latest version 101_b015_multilanguage, installation to the end is unsuccessful, the rollback operation.How to do.
windows 7 64bit
Anti-virus software are closed.
In the end you want to delete which files can be installed successfully ah.
Remove the following keys:
HKEY_LOCAL_MACHINE/Software/Research In Motion/
HKEY_CURRENT_USER/Software/Research In Motion/
Remove the following folders:
C:\Program Files\Research In Motion
C:\Program Files\Common Files\Research In Motion
C:\Documents and Settings\%Username%\Application Data\Research In Motion
Delete these can not be a successful installation ah.
Reinstall this every time
rolling back action
Installshield wizard completed
the wiard was interrupted before blackberry link could be completely installed.)

You are not the only one facing this issue. Please see this thread: http://supportforums.blackberry.com/t5/BlackBerry-Link/Cannot-install-BlackBerry-Link-on-a-Windows-7....

All drum loops in LE 8 are greyed out and Apple loops utility 'can't be installed'

Hi
I installed Logic Express 8 and have loads of loops missing, especially the drum loops.
Even the Apple loops utility is giving me problems. It looks like the Apple loops utility was installed (because I have the icon for it now), but everything inside that utility is greyed out. When I try to re-install it, i get the error message 'Apple Loops Utility can’t be installed on this computer. The specified message could not be found for the index 0.'
I have a new MAC Mini OS X 10.6.7
Help would be appreciated.
UPDATE: I have looked through other related discussions here but could not find the naswer.
I also just checked in /Library/Audio/Apple Loops/User Loops to see if the files are there and of course they are not.
In fact, funnily enough, there are 0 files in the apple loops (although I do have plenty of loops that do play in LE8, just not the drum loops), which is strange. Where are all the files?????
I also found the following interesting point in the discussions here:
'The standard installation doesn't install all the loops. You'll have to do a custom installation and check the GB extras.'
The problem is that I am never given any option to do a custom installation when I install. It only offers the normal installation mode.

Hi,
1. On the newer Macs, iLife 11 or so, only a part of the loops is being installed, and the other part must be downloaded via software update. GB will tell you so if you select a greyed out loop.
2. Loops should all be in "(your HD)/library/audio/apple loops/apple", not in the user library.
3. If you find the loops are installed there but aren't shown in LE or in GB, you might want to re-index the loops.
4. If loops are still missing after re-indexing, drag the loops folder straight above your loop browser and drop them there - this should add the missing loops.
Fox

I have Acrobat 10 and was getting update error messages so I finally did what Adobe recommended and uninstalled Acrobat. Now I can;t re-install the program and get a number of different error messages. Help I need to read pdf docs!

I have Acrobat 10 (10.1.9) that came in the Creative Suite CS5. I have received numerous messages about failed updates so finally did what was recommended by Adobe and uninstalled the program. Now I can't re-install it. These are the error messages I get. Help!
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW065, DW066 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 2 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
WARNING: DW065: Display requirements not met for {53CF3920-648B-4F99-8D05-6A6C5298F57B}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1328.Error applying patch to file C:\Config.Msi\PTDB05.tmp. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1328.Error applying patch to file C:\Config.Msi\PTDB05.tmp. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

I did it through CS, I think. I used the installation disk and selected Acrobat. It loads and then gives me all kinds of error messages and then uninstalls itself.

Snow leopard can't be installed on my machine.

Alright, here goes. Thank you in advance.
BACK STORY:
I have an Intel iMac. I've had it for a few years and it's always been awesome. I was running Leopard, and it was all gravy. So much so, that I even took it in to my Apple store to see if there was anything I needed to do to protect my machine, or if there were any updates for my machine that I should purchase. Dude at genius bar said yea, there is an iLife update and a new version of OS, Snow Leopard. He told me he would update my macbook (which was getting a new hard drive put in) for me and show me how to do it, so that when I got home with my iMac, I could do the same update to it. iLife 11 and Snow Leopard installed perfectly on my Macbook (my secondary computer). I tried to installed Snow Leopard verbatim what the Apple associate showed me, with his written directions. Popped in my disc, selected English, install began, got about 1/3 of the way through the progress bar and an error message came up reading "Snow Leopard can't be installed on this machine". Interesting. Apple store guy said I was good to go?
DIAGNOSIS FROM APPLE STORE:
I took my iMac back to the apple store the next day, with my macbook incase I needed to run a firewire from iMac to Macbook to transfer files. Dude tried to save some of my data but couldn't access it. He told me there was a OS conflict and he was unable to archive and install. He gave me a card with all the information for a data recovery service and told me I was SOL. Great. I took my mac in to make sure it was good to update, he said yes, and then I did it, in turn frying my main computer into a useless paperweight.
FUNCTIONALITY:
When I try to turn on my iMac now, it goes to a grey screen with an apple and a spinning gear. This screen stays up for about 45 seconds and then the computer shuts off. I've connected a firewire to the iMac and my Macbook and held the T key down in an effort to save my photos and music etc. The firewire symbol comes up on the iMac, but nothing appears in my finder on my Macbook like an external hard drive would. If I put the Snow Leopard disc in, and hold the T key, the Snow Leopard disc will show up in my Macbook's finder/desktop. If I put the Snow Leopard disc in the iMac and boot it up the computer just shuts down, even if I hold the C key. If I boot with the Leopard disc and hold C, the disc will mount and I can re-install Leopard, but I get a warning that all of my data will be erased in doing so. Obviously I don't want to part with 200+ GB of data. My last back up was about a month before all this so it won't be the end of the world but there are photos and other things that are recent to my hard drive with no back up and that I'd rather not lose if I don't have to.
BASIC INFORMATION:
I'm 24 with a bachelors degree and I am very comfortable with my mac. AKA you don't have to reply like you're teaching your grandma how to email.
My iMac IS an Intel iMac.
I have 47 GB of free space on it, plenty of room for an OS update.
Firewire ports are FW400 on both computers.
I had to archive and install Leopard once about a year ago on my iMac. Not sure why there was issue, but the problem was fixed when I did this.
So, do I have any options here besides erasing my hard drive? Has anyone ran into this before. Sorry for the rant. Thank you again.

Attach an external hard drive to the iMac. Boot from the Snow Leopard disc again, launch Disk Utility, go into the Restore tab, select the internal drive as the source, select the external drive as the destination, and restore. Then partition -- do not merely erase -- the internal drive, and see whether you can install onto it. If you can, use Migration Assistant to restore your data from the backup.
Not backing up = inevitable data loss.

I installed the free creative cloud on my work desktop, can I also install it on my home laptop and how?

I installed the free creative cloud on my work desktop, can I also install it on my home laptop, and how do I do that?

Hi sacredjny2,
You can use the trial version for 30 days on your home machine, try :Creative Cloud Help | Install, update, or uninstall apps
Thanks,
Atul Saini

How can i re-install the operating system without deleting my files on the computer

I'm Trying to re-install the operating system on my macbook, and i dont know, if i can only re-install the OS without deleting the Data on the computer.

If the Snow Leopard version on your Snow Leopard DVD is lower than the Snow Leopard version on your computer, you will NOT in any case be able to re-install the OS the way you want it. You will only be able to erase your disk and then reinstall the OS.
It will only "upgrade" and keep your files if the Mac OS X version of your Snow Leopard DVD is newer than the Snow Leopard version on your computer.

How can I re-install the app?

Indesign CC was trashed. Creative Cloud Shows app as "up to date". How can I re-install the app?

Hi Notebook57,
You first need to uninstall the application completely.
In Mac :-- Applications --->Utilities --->Adobe Installers
in Adobe installers you will find the uninstaller for Indesign CC just run that and complete the uninstallation.
In window :-- Control panel ---> programs and features --> uninstall Indesign cc.
After doing this you can launch Creative cloud desktop ---> log out and log back in.
You should see the option to install the software again.
Thanks
Kapil Rupani

How can I re-install the last version of iPhoto, I hate this new version.

How can I re-install the last version of iPhoto. I hate this new version "Photos 1.0" which installed yesterday on my iMac. Please help. My operating system is OS X YOSEMITE 10.10.3. THANKS.

Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

How can i re install the OS if the software gets corrupted in OSX 10.8 ?

how can i re install the OS if the software gets corrupted in OSX 10.8 ?

If the hard disk is damaged:
1. Press Command and R keys while your Mac is starting.
2. Open Disk Uitlity, select Macintosh HD in the sidebar and repair the disk. If it can't be repaired, take your Mac to an Apple Store

I have hp 430 laptop,how can i re install the windows 7, if i not have original window on my laptop

I have hp 430 laptop,how can i re install the windows 7, if i not have original windows on my laptop. i have oem number,
But i have troubol to finishing installation of window.

Originally the Notebook will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now
As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partition is in a working condition or not, If yes you can easily recover/restore your Notebook
If Recovery Partition is corrupted
You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Notebook at the earliest
OR
You need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Notebook at the earliest
I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Can ME be installed on AIX?

Similar Messages

Maybe you are looking for