Can metadata be loaded using ODI into classisc applcn and upgraded to epma

Hi John,
As ODI is not compatible with EPMA, cane we load metadata into classic using ODI and then upgrade the applcns to EPMA?
Is this method suggestible? When are the adapters for Planning to connect epma will be released. any idea?

Hi John,
Thanks for the information.
As per your blog you have loaded the entity dimension using the Hierarchy and members tables. Is the structure of these two tables same as interface tables?
And can i insert all the dimensions and their members with only these two tables or do i need to create two sets of tables for every dimension i have.

Similar Messages

BINARY FILE loading using ODI

Hi ,
is it possible to load a binary file using ODI ?
Basically i'm looking for file to table and file to file conversion .
Regards.

DBMS_LOB.LOADBLOBFROMFILE (
dest_lob IN OUT NOCOPY BLOB,
src_bfile IN BFILE,
amount IN INTEGER,
dest_offset IN OUT INTEGER,
src_offset IN OUT INTEGER);
you can specify the src. Also, you can ftp the file using ODI sftp tool and then load.
There are other ways to load as well,
1. Sql loader aslo supports loading BLOBs. Odi has got IKM Sql loader however I have never tried with BLOB and need to check if it supports. The below link might be helpful,
ORACLE-BASE - Loading LOB Data Using SQL*Loader
2. External tables could be used.
3. Java program could be called in ODI proc.

How can I split my Dj mix into separate tracks and export the tracks

How can I split my Dj mix into separate tracks and export the tracks. I'm trying to burn my Dj mix to cd and I don't want it to be one long track.

Henryfrommo wrote:
How can I split my Dj mix into separate tracks and export the tracks.
http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
(Let the page FULLY load. The link to your answer is at the top of your screen)

HT201301 Can vmware player be used to create windows pc and mac. Will I need any other software or hardware to do that?

Can vmware player be used to create windows pc and mac. Will I need any other software or hardware to do that?(Have Windows and Mac on same computer)

Since you posted this in the iPod Touch forum and didn't provide enough information to contradict that I am going to say the it can't be done. VMWare does work in iPods.
Allan

How can i type international alphabet characters into keywords, title, and captions in Lightroom 4?

How can i type international alphabet characters into keywords, titles, and Captions in Lightroom 4? Usual Microsoft key shortcuts not working.

I haven't found a way to do that directly, but there is a workaround. It' s a bit cumbersome, so it's only good for the occasional character.
In MS Word or any other text editor create a file that contains all the international characters you need.
When you need to insert one of these characters into Lr (captions, title, keywords) copy the character from your text document and paste it into Lr where needed.
On Windows Ctrl + C / V works fine.

I was using osx 10.5.8 and upgraded to mavericks 10.9.4,after when restoring all my data from time machine ,the new mavericks os was replaced by the old OS 10.5.8 any solution

I was using osx 10.5.8 and upgraded to mavericks 10.9.4,after that ..when restoring all my data from time machine ,the new mavericks os was replaced by the old OS 10.5.8 ...any solution to get back to the upgraded mavericks OS????

Hi, how did you get MavX from 10.5.8, since it requires 10.6.8 to get MavX from Apple's App Store?

Metadata loading using ODI

Hi John
I am loading Employee metadata using ODI(10g). In IKM SQL to Hyperion Planning, i put the option "LOAD_ORDER_BY_INPUT" option to "NO.I expected that, ODI will sort the employee members and load it. But its not sorting, it loaded in the same sequence as in my load file.
Please suggest, how can i sort the members
Thanks,

Hi
This post would be more suited to the ODI forum.
Anyway, check out ODI Order By Issue

Metadata load using ODI

Hi
I am trying to load new Employees using ODI.Our Employee members are in Alphabetical order.Is there any way i can load new employees in Alphabetical order.
Please suggest,
Thanks,

Then I believe it will add them to end.
Say you had
Par
-----A1
-----A3
Then you tried to load
Par | A1
Par | A2
Par | A3
You should end up with
Par
-----A1
-----A2
-----A3
If you tried to load just
Par | A2
Then you would end up with
Par
-----A1
-----A3
-----A2
which is pretty much the way planning works, if you tried it through the outlineload utility you would end up with the same.
Cheers
John
http://john-goodwin.blogspot.com/

GL Data load using ODI to Essbase

Hi, I am trying to load GL actual data to essbase application using ODI. Source file is having 10 columns and the Target is having 11 columns. We are using rules file to load data into essbase. Rules file will split 9th column as two columns and will load the data into Essbase. When we test the rules file in essbase data is getting load into application. when we use the same rule file in ODI interface data is not getting load and giving error as "Unknown member" for the member which we are spliting in 9th column. Source file: HSP_RATES ACCOUNT PERIOD YEAR SCENARIO VERSION CURRENCY ENTITY SFUND PROGRAM DATA HSP_InputValue 611101 Jul FY13 ACTUAL Final Local 0000 SBNR AC0001PS0001 25000 AC0001PS0001 is the concatenated string from GL. we will split this as two columns using rules file to load into essbase application. Please suggest what might be the reason for the error. How to do the mapping between source and target. I have mapping one column(AC0001PS0001) to two dimensions (Program, Activity) in Essbase. Please suggest. Thanks Sri

In ODI, what you have to do is to split it in the ODI itself. While you are mapping, you can use SQL functions to map it to two different columns. Similar to the way you are doing it in Rule file.
Regards
Amarnath
ORACLE | Essbase

Data loading using ODI

Hi,
I am using ODI 10g for loading data into oracle 10g database from a flat file. The flat file is in fixed format, but the data is in a single row, so the data is not loaded correctly. For example, 1000 records are shown in 1 line.
Can someone please suggest, what customization should I make to the IKM to achieve this.
Please let me know the questions you may have.
Thanks a lot.

Hi John,
I reversed my Planning model and able to see those columns now. I tried executing my interface and got the below error
The source result set contains column [EMPLOYEE_ACCOUNT] which has no corresponding column on the planning side.
My source is an oracle table and i have seperate columns for each dimension member. What I did is, mapped the Data column (JobTitle) from source to the Target column(JobTitle) and rest all dimension member columns from source to Point of View column seperated by a comma. My Planning cube name is EMPLOYEE, so in th data cube name column i manually entered "EMPLOYEE" and tried executing it.
Please guide me as always
Thanks,
Sravan

Why can't I load some samples into Logic's EXS24??

Hi everyone,
I am having an issue with loading some of my samples into the EXS24. I am using OSX 10.3.9 and Logic 7.1.0. When I try to load a sample, I can see that it recognizes it, yet when I click on it the sample doesn't load. It doesn't even try to load, It just shows blank dots in the loading window. Can anyone help me with this? I have to have this to work for my job. Thanks so much for the input!
-Matt

When you say you are loading a sample, I presume you are not trying to load a sample using the EXS24?
If you are, you should read the EXS24 manual, because that is not how it works - the EXS24 directly loads "sampler instrument" files only, and it's those that contain references to all the sample files.
So you open the EXS editor, create a new instrument, load your samples into that, save it, and then select your instrument in the EXS24. Long-winded, but that's how it works.
Or did you mean something else?

Field Length Restriction on DATA_COLUMN_MEMBERS while loading from ODI into Essbase.

Hi All,
I have a question on Data Loading process into Essbase using ODI using ‘RKM Hyperion Essbase’. While doing the custom Reverse Engineering for level 0 columns, we find a message popup with the below message:
Unable to save Test( ORA-12899: value too large for column "ODI_HYP_W"."SNP_UE_USED"."SHORT_VALUE"(actual: 368, maximum: 250)).
The error says the total length of all the DATA_COLUMN_MEMBERS (Level 0 columns) exceeds 250 characters, which is usually the case in a real world scenario. Is there a setting to bypass this or a config tag to ignore or so ? How has others go around this issue ?
Would appreciate your responses.
thanks,
Sandeep.

Hi John,
I have marked the ExportColHeader as Period as i need data for all the months. Even then the same error.
Also,
When i tried to load data from a file to table, the following error is encountered.
java.lang.NumberFormatException: For input string: "#Mi"
     at java.lang.NumberFormatException.forInputString(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
     at java.math.BigInteger.<init>(Unknown Source)
     at java.math.BigInteger.<init>(Unknown Source)
     at java.math.BigDecimal.<init>(Unknown Source)
     at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.addBatch(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

My iPhone 5s keeps randomly shutting off and restarting. It can either be in use or just sitting there and it will turn off. I can't figure out what is wrong.

My phone randomly shuts off. I will be in the middle of using it and it will completely turn off. I can also not have used it all night and I will pick it up and click the home button and then it will flash the apple restart screen. I'm not sure what is causing this as I have only had the phone for about two weeks. It's a little concerning and just wanted to see if anyone knew what it could be without me having to go into the Apple store.
Thanks!

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

Can i plug an usb drive into a iMac and access it with a Macbook pro?

I have an iMac that is less than 3 months old and my wife now has a two week old Macbook Pro.
IMac:
21.5" screen
3.1 quad core i7
16 GB Ram
1 TB Fusion drive
Macbook Pro:
13" screen
3.0 dual core i7
8 GB ram
512 GB Flash storage
Both have Mountain Lion.
Both are running iOS 6.1.2
I would like to attach an external USB hard drive to the iMac and allow the Macbook Pro to be able to have full access to just the external USB hard drive. Either it can't be done or I am just not getting the Sharing settings set correctly. I played around with sharing last night on both machines. When I would plug in a FAT 32 thumb drive into either machine and find it, I would add it to he shared folder but it would only allow me and "Everyone" to have access. I could not change "Everyone" to "No Access" because "Everyone" was greyed out or add my wife. I can access the Macbook Pro as Mark with the iMac but I can only access the iMac from the Macbook Pro as a "Guest".
I am using a Netgear WNR3500L router. I currently have the USB hard drive connected to the router via the Readyshare USB port but it is formatted as NTFS for Windows shared files. This router does not recognize HFS+ formatted hard drives in the USB port. When I move it to the iMac, I will back it up and then reformat it as HFS+. Since the router is about a year old and working fine, I would buy an Airport Extreme or Time Capsule if that is my only choice.
I don't normally turn off the iMac.
I would not want to allow access to any other device.
Since I am very new at Mac's, I would appreciate any help that any of you can offer me.

Topher Kessler,
Thanks for commenting to me.
My thumb drive is formatted as Fat 32 so your first paragraph explains what I am seeing.
You are correct that my existing router does not support HFS+. It is visible from my MAC and some file are read only.
The drive that I will be wanting to attach to the iMac would be formatted as HFS+ so it would not be accessible from my router.
So, if I setup sharing (If it is possible) and thern plugged in a USB 3.0 hard drive into my iMac, would it be accessible to my Macbook Pro? If it would not be, it looks like an Airport Extreme or a Time Capsule are my only options?
I see that a Netgear 4500 is Time Machine compatible. Any idea what that means? When I read pages 80 through 82, it appears to me that you format your drive to HFS+ and then eventually plug it into the router usb.
http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_08Jul12.pdf
Thanks for your comments.

Can you tell if someone connected into my blackberry and backed up all your data??

I am suspicious that someone at work somehow took all my emails and contacts off of my phone. I know a number of coworkers who all use blackberry desktop software.
Is there a way I can tell if someone plugged my blackberry into their computer and somehow backed up all my information onto their computer? Thanks
-Kevin

Have you had the BlackBerry device out of your hands, out of your control, for 10-15 minutes?
Unless you inspect their PC for the backup file, no.
The only other possibility is examining your own device event log, I just did a backup, examined mine and I can't see anything that indicates a backup was made.
I gotta ask, why do you suspect this?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can metadata be loaded using ODI into classisc applcn and upgraded to epma

Similar Messages

Maybe you are looking for