Can MOPZ be used without installing Diagnostic Agent.

Hi,
I need a clarification.
In Solution Manger 7.1 Version, can I use Maintenace Optimizer (MOPZ) to download SP's for a Managed System without prior installing Diagnostic Agent on the Managed System? If Yes, please write a brief procedure as below. (because my colleague was telling that one must install DA before using MOPZ).
In older Versions, to use MOPZ:
Send Managed System data with tcode RZ70 -------> The data will arrive in SLD of Solman -------> Assigning a Product and creating a Logical Component in SMSY -----> Assigning the Logical Component to a solution in DSWP --------> Now MOPZ can be used.
Thank you,
Mohan.

Hi Mohan,
Not required any agent for MOPZ setup.
Prerequisite:
*Initial, Basis and Managed system configuration setup( RFC creation, AISUSER assignment)
Open the MOPZ using 2 ways,
option 1. Using LMDB system landscape
option 2. In solman_workcenter -> Change Management -> New Maintenance Transcation ( for new MOPZ)
Prerequisite:
User ID is maintained in AISUSER
Configured Technical System in SMSY.
Follow the below documnet for MOPZ step.
http://scn.sap.com/docs/DOC-26893
Not required to create the solution as show in documnet , directly select the production version and start the MOPZ as show the document, remaining step are same.
Step by step how to Configure System for using MOPZ
Rg,
Karthik

Similar Messages

Hi. I have bought both Adobe XI Pro and standard and downloaded only one of them yet. How do i proced to download the other? Can this be done without install or perticipate within Creative Cloud, only by using username and PW?

Hi.
I have bought both Adobe XI Pro and standard and downloaded only one of them yet.
How do i proced to download the other?
Can this be done without install or perticipate within Creative Cloud, only by using username and PW?

I assume you have the S/Ns. The download is at http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. Be sure to backup the download to CD or backup HD for future use.

Error while Installing Diagnostic Agent

Hi Experts,
We are getting an error while installing Diagnostic Agent in Solman 7.1. Please find the attached Screen shot of error.
Can you please suggest us what was our error... So that we can move forward.
Thanks in Advance..
Regards,
Krishna.M

Hi,
After finshing of installation with that warning msg , u need to run the SMDSetup script manually in the server as like below.
1. Open a prompt command and navigate to the script folder inside of the agent path: usr/sap/<SID_AGT>/SMDAXX/script
2. Run the smdsetup script as the following examples:
Connection by Message Server:
- smdsetup managingconf hostname:"sapms://solman.full.qual.host.name" port:"81XX" user:"SMD_ADMIN" pwd:"XXXXXXXX"
Kindly refer the below link for the further information
http://wiki.scn.sap.com/wiki/display/SMSETUP/Diagnostics+Agents
Thanks & Regards,
Sandeep Alapati

Understanding Flex: Can it be used without Flash-knowledge, and some other questions

Hi.
I'm trying to understand how Flex works. My understanding is
that Flex is like the integration link between Flash-content and
.NET-applications on the web. We need rich interface on our
.NET-applications - without ActionScript-coding required from the
programmer's side.
Can this be acheived with Flex alone?
What is Coldfusion required for? Can Flex be used without it
to create the rich web interface?
Are basic components included and ready-to-be-used? What if
special components are needed? E.g. multi-level menu-tree or some
special data grid. Can this be developed by a Flash-programmer and
used as a "generic" component?
My reason for choosing this would be that we easily can
acheive great web-layouts that are Flash-based, and that interact
with our .NET-applications. Is this the product I'm looking for?
Thanks alot in advance! :D

It is absolutely possible to create complex custom components
in Flex and without FlashPro.
Flex can communicate with the server in several ways.
WebService: SOAP-based
HTTPService: XML over HTTP, (like REST and AJAX)
RemoteObject: uses proprietary amf protocol, needs Java or CF
on back-end
There are some others like URLLoader and sockets.
Unless you need your back end functionality to be generally
available to anonymous third parties (hence the wsdl), WebServices
are unnecessarily complex.
I prefer HTTPService, I post xml strings in the normal
name=value format to the server and use e4x xml as the resultFormat
in flex.
Even though you said "roughly", that is still an impossible
question to answer, there are too many variables: On the back-end,
do you need to install a database? Create the schema? or is some of
that part done already? On the front-end, How will you navigate the
records? See, too many variables.
The communication part is by far the easiest. Almost
negligible, although the Flash Player security can cause some
head-scratching!
Tracy

Configure a database without installing grid agent

Hi,
is this possible to configure a database without installing grid agent
regards,

maja wrote:
Hi,
is this possible to configure a database without installing grid agent
regards,With grid agent you mean the agent for the Grid Control ? If yes, the answer is yes , you definitely can create a database without it.
Aman....

Re: "Item category K can only be used without account assignment"

Hi,
while creating PO from PR the following error is coming.
"Item category K can only be used without account assignment"
How to solve this
Regards,

Hello,
Item category K cannot be used with an account assignment as the goods are not physically used in the company. The stock is stilla consignment stock and belongs to vendor. Using an account assignment will book the cost in the company's expenses.
use an account assignment if required when you transfer from consignment to own stock.
Hope this helps,
Regards,
VS

Cannot install mountain lion. error "This copy of the Install OS X Mountain Lion application is damaged, and can't be used to install OS X."

cannot install mountain lion. error "This copy of the Install OS X Mountain Lion application is damaged, and can't be used to install OS X."

You do meet the hardware requirements. Otherwise you wouldn't have been able to purchase ML.
If you're connected wirelessly to your router, connect with Ethernet.
If you're connecting through a proxy, connect directly.
Boot in safe mode (shift key down at startup) and try again.

Do you need to have Adobe Acrobat X or XI in order to use FormsCentral? Can FormsCentral be used without Acrobat to create and modify forms?

Do you need to have Adobe Acrobat X or XI in order to use FormsCentral? Can FormsCentral be used without Acrobat to create and modify forms?

Hi Joseph,
Unfortunately, no. But Adobe does offer a free 30-day trial of Acrobat (absolutely no obligation). So, you could download the trial to fix up the form. For more information, see www.adobe.com/products/acrobat.html. Acrobat is also offered on a subscription basis.
Sara

How can I update Flash WITHOUT installing Chrome?

How can I update Flash WITHOUT installing Chrome? I keep getting update messages. I go throught the download and install process but there is no option to un-check installing Chrome. I don't want Chrome. I'm not asking for Chrome. I just want to update Flash.

There are a few threads around here with this same issue, and as far as I know Adobe has not addressed it adequately. Many of us, when we are prompted with an update for Flash, are not given the option to opt out of installing google toolbar and google chrome.
Adobe is playing cute, pretending to be surprised at such reports. They always demand screenshots of it, and then ignore them when the screenshots are posted. Then demand screenshots in the next thread with the same issue, feigning surprise that such an isue could occur. Sometimes they insist it isnt happening or it is somehow user error (as if it is user error to simply allow the update from their app to install after getting the update message from their app! )
The problem , in my case, was that the update goes to a URL that autoselects chrome and toolbar. I found if I manually edited the URL, that it would not automatically install chrome and toolbar.
Basically the URL has to be manually edited , so take out the " &a=Google_Toolbar_7.4&a=Google_Chrome_22.0_IE_Browser " at the end AND the "&dualoffer=true&chromedefault=true" bit in the middle. Then it will give you the opt-out. Then do make sure to uncheck the box, obviously And it is obvious that the users are not doing this on purpose, this is built into Adobe's updater, somewhere. I went into a little more detail in http://forums.adobe.com/message/5274050

How can I connect oracle without installing its SQL*Net client?

How can I connect oracle without installing its SQL*Net client?

Pls suggest, any possible solution, i cross checked from below link, and tried to install the instant clients, but
http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/winsoft.html
its showing me error of "This application has failed to start because OCI.dll was not found. Re-installing the application may fix this problem."
Let me know if you have any thing on this.

This copy of the Install OS X Mavericks.app application is damaged, and can't be used to install OS X.

This copy of the Install OS X Mavericks.app application is damaged, and can't be used to install OS X.

i am having the same problem , i have already downloaded and Trashed this download 15 times , same error .
i have also run onyx and there are no hard drive problems
Greg

This copy of the Install OS X Mountain Lion application is damaged, and can't be used to install OS X.

This copy of the Install OS X Mountain Lion application is damaged, and can't be used to install OS X.

I attempted to burn a DVD of the installer, but that didn't work (files are too big).
Also grabbed the ESD from inside the package and it started to work, then hung on the "installing" screen.
Here is how I finally solved the problem after redownloading it 4-5 times:
Put my MacBook Pro into target mode and used my Mac Mini to install Mtn Lion.
At first the installer balked saying it wasn't signed right or some such BS. I tried again and it worked fine. I now even have a recovery parition which I didn't have before.
So in the end I have no idea what the problem was but it was not:
A proxy error corrupting the download
A corrupted download of any kind
Permissions errors
Hard drive errors
Incompatability with RAM or my hardware
Incompatibility of my partitioning scheme
I think there is a bug in the "pre-flight" checks the installer does prior to doing its job.
Rich

This copy of the Install OS X Mavericks application is damaged, and can't be used to install OS X.

I try to install Mavericks to my MacPro, I got this mesaage after I downloaded the OS. "This copy of the Install OS X Mavericks application is damaged, and can't be used to install OS X". I dowlaod 5 times already but still doesn't work. Anyboby know how to make it works?

This could be a problem with your router. I had replaced one if my Linksys routers with dd-wrt firmware. Overall my router ran a whole lot better but then I started noticing very large files would download only up to a certain point then they would be corrupted. The issue was only discovered by me when I was downloading iOS images.
After extensive network troubleshooting I discovered the problem appeared to be my router that was dropping the packets and causing corruption. So I replaced my firmware back to stock and my downloads worked fine.
I am not suggesting you replaced your router firmware and this is your problem but I do think it is worth a try to see what happens with a different router.

Should I install Diagnostic Agent on managing system itself ?

Dear All,
I am using a solution manager as an managing system .
Should I install the Diagnostic Agent on the managing system , too ?
My solution manager is 7.01 EHP1 SPS22, I find there exist a directory /usr/sap/SMD , so it seems the Disgnostic Agent is installed during the solution manager installation . But in the Work Center -> Root Cause Analysis -> Agent Administration , it returns a "service cannot be reachable " error,
"URL https://<solution manager host >:8000/webdynpro/dispatcher/sap.com/tcsmdnavigation/StandaloneApp call was terminated because the corresponding service is not available.
And in the http://<solution manager host>:50000/smd , managed system -> setup wizard , I choose the solution manager SID , and next, it show the SMD agent hasn't been found.
I re-installed the SMD agent , but the result is the same, and I've tried to install the Diagnostic Agent 7.11 and still the same.
Anyone encounter the same problem as me ??
Thanks.

Hi, David,
In Solman_Setup , The initial and Basic configuration are finished without error ( green light).
And in managed system configuration , configure system, the first step check prerequisities failed with red light; the detail error messages is as below :
It seems some kind of service not activated in SICF , but not for sure.
Service cannot be reached
What has happened?
URL https://sapsolmgr.centurydsp.com:8000/webdynpro/dispatcher/sap.com/tcsmdnavigation/StandaloneApp call was terminated because the corresponding service is not available.
Note
The termination occurred in system SM2 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-https-c:000-u:SAPSYS-l:E-i:SAPSOLMGR_SM2_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Thanks for your reply.
Enddy.

I think my hard drive crashed. How can I get data off via firewire before the HD completely goes? I was stuck on the BSoD and now I can't even use the install disk. Utility Disk said HD was okay. Please HELP ME

Safe mode did nothing.
Safe mode with verbose seemed to make it worse.
Before continuously trying new things, I could use the install disk to check the disk utility and clear
the hard drive from there but now the screen won't even load to that.
I really need the data on the hard drive especially if it can't be salvaged.
How can i transfer files?
Am I better off physically taking my HD out or will it damage itself without
leaving the system.
I tried command r
resetting the pram
safe mode
jumping out a window
nothing has helped.
I am stuck on the blue screen of death and it flickers.

No. In order to use FireWire Target Disk Mode you need to use a FireWire equipped Mac. Other than that the only other way I can think of to even attempt to access you files would be to remove your hard drive and install it in a case and connect it to another computer.
Have you run the Apple Hardware Test? http://support.apple.com/kb/HT1509

Can MOPZ be used without installing Diagnostic Agent.

Similar Messages

Maybe you are looking for