Can more than 9 tax types be defined for a country in OVK1 ?

Hello experts,
I have read all documentation on the settings for tax determination. However, nowhere I could find answer to my question:
"Can more than 9 tax types be defined for a country in OVK1 ?"
In OVK1, we can define more than 1 tax type for a country using sequence. But the sequence field is having length of 1 numeric field.
If I am having a requirement of assigning more that nine tax types to a particular country, how do I do it? I presume it is not possible and I will have to find some other solution.
Please advise. Highly appreciate your help.
Thanks!
-Harish

Can more than 9 tax types be defined for a country in OVK1 ?
Never come across such a requirement.  Eager to know why you need and for which country ??
thanks
G. Lakshmipathi

Similar Messages

  • Can more than one song be selected for slideshow on IPhoto? If so how

    Am trying to put together slideshow of granddaughter's birthday party but want to use more than one song as have a lot of photos.

    Thank you for sharing your expertise. I have taken that and tried to create a document on how to do this. You will see some different/additional comments. My idea is to share it with everyone once it is finalized. I am about ready to try and walk through all the steps for real but would ask you to read this over before I commit several hours more to this project. Any comments are appreciated. I am concerned about steps 9 through 13. Not sure i have it right. Any comments will be appreciated. Maury
    ++++++++++++++++++++++++++++++++
    How to create a Slideshow on DVD
    with music
    using iPhoto and iTunes
    as input sources
    1. Select, crop, and fix slides needed from the iPhoto library. Put them into a newly named folder. (Not a slide show.)
    2. Import this folder into iMovie using KenBurns ON.
    3. Add any necessary transitions between various segments of resulting movie.
    (This should be the finished visual project. Using this write down the exact timing needed for stop/start each segment and the total length of the movie.)
    4. Go to iTunes and select various tunes/songs/music desired.
    5. Go to Amadeus and open a new file. (This single will end up the same length as the visual project).
    6. Open JACK to connect iTunes to Amadeus.
    7. Choose a tune, find the correct snippet of music and adjust to stop/start times from 3 above. Move your snippet to Amadeus. Use cross fade so one snippet will blend into the next one. Load these in the correct order of the slideshow segments.
    (Note: Music purchased from the iTunes Store is "protected" in ACC and will no render into another format. This means it cannot be used in this example. A major inconvenience.)
    8. Your result will be string of snippets strung together in proper order and in total making up a single file the same length as your slideshow.
    9. Paste this new music file into the iMovie.
    10, Close iMovie.
    11. Open iDVD, select your theme and leave the menu window open.
    12. Open the iMovie project file (Control-click on it and select Show Package Contents) and navigate to the Shared Movies/iDVD folder.
    13. Drag the .mov file in there into the open iDVD window being sure not to drop it into any menu drop zones.
    (You'll know if you are in a drop zone (if there are any) since a text link appears with the same name as the movie file you're dragging.)
    (This allows iDVD to do the rendering thus eliminating two renderings on the same file which reduces image quality......)
    14 Save the project to Disk Image instead of burning directly to disk.
    15. Open the disk image and launch DVD Player.
    This will let you check out the finished project with DVD Player before committing to disk. You'll be able to check out the audio sync, typos etc.
    16. When you are ready to burn to disk use File>Disk Utility.
    (See: Burning a disk image file on a CD or DVD in Mac OS X.) The first step, saving to Disk Image is the encoding process and takes the longest time. Often it will seem like it's hung on the audio encoding but let it go on and on, as it often is the longest part of the encoding process.
    17. This should be the finished product.
    18. Snail Mail DVD to adorable grandchild and wait for parents to call saying it made them both cry. (Of course, this implies you are a grandparent.)
    Credits: Old Toad and Maury56
    Software: iLife 06 (iPhoto, iTunes, iMovie, and iDVD); DVD Player; Amadeus; and Jack.
    +++++++++++++++++++++++++++++++++
    About item 16, is there any way to tell the difference between "hung up" and "encoding" while it is going on?
    Maury
    PowerMac G4   Mac OS X (10.4.6)  

  • Hello, I have installed Reader, Adobe Acrobat, trial versions of Photoshop and Illustrator. Some more than once. They work for a few days at most then I am told to re-install. I cant look at any pdf file even though I can still see reader in my programs.

    Hello, I have installed Reader, Adobe Acrobat, trial versions of Photoshop and Illustrator. Some more than once. They work for a few days at most then I am told to re-install. I cant look at any pdf file even though I can still see reader in my programs. What is going on and what can I do to fix this?

    Unfortunately no, It says "Adobe not responding" as well when I try to open a pdf. It has done this a few times where I had to uninstall and reinstall. Also, Illustrator tells me to uninstall/reinstall as well.

  • Can I have more than one routing status 4 for one product?

    Can I have more than one routing status 4 for one product in R/3? What impact will have this routings on Financial departament? 
    I am working in PP and | want to implement perfect planification, but I don't know if I have 2 routings for each equipment.
    And also each routings status 4 will have his production version, can financial to do corect calculation?
    Thank you!
    V

    Hi Mangalraj,
    My question is about the impact on financial calculation. I know I can have more 2 or more than that active routings status 4.
    I want to know how the financial SAP guys decide which routing to chose when they run the final month calculation. Or can they make a sum of all routings I have?
    For example if I have:
    - 3 SMT line where I produce one product. So, I want to have dedicate routing for each line and production version.
    In this case if we produce:
    200 part on the first line wich have machine time equal with 4h/100pcs
    800 part on the second line with have machine time equal with 2h/100pcs
    on last one we don't produce now but this have machine time equal with 5h/100pcs.
    I want also to mention that all operations in all routings are marked CostRelevncy.
    So, the production planner will have the perfect planning But how is this for financial SAP specialist? Is easy to manage?
    Thanks,
    Versor

  • Can more than 1 ver of FF be installed at the same? If so, How?

    Can more than 1 ver of FF be installed at the same time? I currently have FF 3.x installed, and want to migrate to the newest FF, but before I do, I need to see which of my add-ons are no longer needed due to new intrinsic FF features, and if other add-ons are compatible. I simply need to have the features of certain add-ons, and if the new FF does not have the features I need, and the add-ons that give me those features are not compatible with the new version, then I simply can't upgrade. At some point I will write a detailed document stating features that I believe should be built into FF, but until then, perhaps a new Mozilla Migration Wizard program should be created. It would be able to scan a person's current installation, add-ons and all, and provide a report on which add-ons are compatible with the version the person wishes to upgrade to, and which are not, and check online to see if updates for the incompatible add-ons are available. The Mozilla Migration Wizard should also tell the user which add-ons are obsolete because their functions are built into the newer version of FF. But back to the question at hand: Can more than 1 ver of FF be installed at the same time? If so, is there a special procedure to follow? Will trying to install a second version corrupt my currently installed version? I hope a dual installation is possible because it will help me to transition to the newest FF as smoothly as possible, and it may also provide me with insight to suggest new features, procedures, functionality, utility type programs, and such.
    Thank you for your time.
    I hope to hear from you soon.
    Gunther

    See also:
    *http://www.mozilla.com/firefox/features.html
    *https://support.mozilla.com/kb/common-questions-after-updating-firefox

  • Can more than one action be maintained on same day?

    Hi
    Can more than one action be maintained on same day?
    Charlene

    Hi,
    SPRO -> PM->   PA->CUSTOMIZING PROCEDURES->  ACTIONS-> SETUP PERSONNEL     ACTIONS-> PERSONNEL ACTION TYPES. In this step check under both "U & U" columns for that particular action.
    •     Activate additional action infotype P0302 in T529A table.
    You can do two actions on the same day without changing employment status.
    •     Cause and prerequisites
    You use the functions 'Additional actions' (infotype 0302) (that is, flag ADMIN EVSUP = 1 in table T77S0). If you delete or shift a created personnel action type 'Leaving' and then create a new personnel action without leaving the transaction, on the list screen of infotype 0000, the system does not display the last but one personnel action.
    Solution
    To correct the display problem, start report RPUEVSUP for the affected personnel number. Then check Customizing of the personnel action types (table T529A), since the report sets indicator U0302 (update of infotype 0302) active for all personnel actions.
    •     RPUEVSUP --- Activation Program for Additional Actions (0302).
    Pls reward suitable points.
    Regards,
    IFF

  • Can more than one apple id sign in on my tablet without deleting anything off

    Can more than one apple id sign in on my tablet without deleting anything off? Or does err1 hve 2 use ID while on my iPad?
    Message was edited by: RuEnvy35

    Another ID can be signed into on the iPad without losing anything, but it is not advisable to download purchased content with another ID, or you will lock yourself out of your own ID for 90 days.  Why don't you explain exactly why you want to sign in with another ID.

  • HT1719 Can more than one device access the same ITunes library?

    Can more than one device acess the same ITunes library?  And if so, does each device's list of songs remain separate and distinct for each device?

    No problems whatsoever. I have 3 iPhones and 3 iPod touches with different IOS connected.

  • Display more than one line of text for events?

    I couldn't find this in the forum... I just recently updated to Leopard. Now when I put events in iCal, it only displays one line of text in the month calendar view. I'd really like to see the whole description of the event, even if it's two or three lines. I can't find anything in preferences that addresses this, and various searches are not yielding anything. Help?
    -mel

    Hi there.
    Usually in iCal if you want more than one line of text for timed events, resizing the window will help. Under all-day events, iCal will always show you one line of text, but if there is more space it will show you more text. So, also resizing the window for this will help to see the text.
    Take care.

  • Clearing amount is more than tax base in Invoice

    Hi Friends,
    I am facing one issue at the time of Clearing through t.code F-54. I have made payment 10000/- and deduct TDS 1% on Base amount 5000/-. We have booked vendor invoice with same amount 10000/- and deduct TDS 1% on base amount 50000/-. Now we are doing clearing F-54 and simulate the document then it is showing error message " Clearing Amount is more than tax base in Invoice" Message no Message no. 8I000.
    Please give your valuable suggestion on it.
    Thanks & Regards,
    Pankaj

    Hi Pankaj,
    There is problem while clearing throgh F-54 is just because of imbalce between the Down payment and the invoice amount.
    In down Payment for deduction of tds calculation  base is 5,000 and in invoice the calculation base is 50,000.
    F-54 is to clear the vendor invoice with same amount.
    Please check .
    Hope this will help you,
    Thanks,
    Deepa

  • Can more than 16 dimension be created in a cube..

    Hello folks,
    This was a question in an interview for me.
    I believe that is a standard set by SAP but you can create more than that.
    Can more than 16 dimension be created in a cube?
    regards
    GVS

    hi,
    it is purely primary key reference issue.ie table restriction we call.
    most of the databases supports 16 keys only
    Ramesh

  • Can more than one computer "supervise" an iPad at one time?

    Can more than one computer "supervise" an iPad at one time?

    Do you mean share via USB? Or connect to two different computers?
    USB can't share two connections at once like that, and for it to be connected to one, then the other, both computers need to have the same iTunes account running.

  • Can more than 1 iphone sync with itunes?

    can more than 1 iphone sync with itunes?

    mbraase wrote:
    This isn't a problem, but a question.
    1. Can you sync your iphone with remote to more than one itunes library (such as itunes on 2 different computers)?
    Yes you can sync with more than one iTunes Library. I just did it today with the library on my Mac and PC
    if so then...
    2. Does the itunes have to be maximized for the remote function to work, or can it be minimized on the task bar at the bottom?
    On my mac I can play the songs with iTunes minimized.
    The reason why, is I want to sync my iphone with my mother's computer at her house, and put some sound effects on her library. Then I want to turn her itunes on and minimize it and wait until she starts working on her pc and then I can play some practical jokes on her making her computer make weird noises (sound effects on itunes).
    Any answers would be appreciated by me (but not my mother).
    Thanks, and happy pranking to you all

  • Thunderbolt conundrum: Can more than one device operate from the same port?

    Hello! I am using a macbook pro with one thunderbolt output. The thunderbolt is being used on a Universal Audio Apolo Quad analog/digital audio recording device. I would also like to add a second video screen to my operation as well. Can more than two devices be ran (via a splitter of some sort) from the Thunderbold port? If not, are there any workarounds?
    Thanks!
    Clint

    Thanks for the reply. Back to the drawing board...

  • New iTunes on Mac doesn't allow me anymore to select all songs and 'Get info' to adjust the volume, like the old one. It says"your selection contains more than one type of media". They are all songs! Help please!

    New iTunes on Mac doesn't allow me anymore to select all songs and 'Get info' to adjust the volume, like the old one. It says"your selection contains more than one type of media". They are all songs! Help please!

    Raya Alfa wrote:
    ...there are some that are mp3 and it will be extremely hard to pick them from the lot.
    Not true. Select "Kind" as a sort category by right clicking the headings
    Then click to sort by Kind
    If your Import Settings are for Apple Lossless, AIFF, AAC or whatever the majority of your files are, convert MP3s to that file type.
    I've presently got 17,000+ files in my library, and they're ALL MP3 or M4B(Audiobooks). If they weren't when I got them, I converted them.  Saves a LOT of hassels with just this type of situation. Besides I have two non Apple MP3 players that WON'T work with other file types besides MP3 so, EVERYTHING I have has to be MP3.

Maybe you are looking for