Can more than one child be visible/open at the same time in Accordion navigator container?

I have a situation where I need a layout like Accordion
container but with more than one child panel visible at the same
time. Is it possible with Accordion container? If not, any
suggestions to implement this layout?

Ryan,
Could you elaborate on what you mean when you say that the program which ran first cannot find its report?  Are you trying to modify the same report simultaneously with these different apps?
Regards,
Jared Boothe
Staff Hardware Engineer
National Instruments

Similar Messages

  • Can I have more than one version of adobe reader at the same time?

    can I have more than one version of adobe reader at the same time?

    If I may add a qualification: on a device running full Windows 8, you may have both Adobe Reader Touch and Adobe Reader (normal desktop edition). This does not apply to the primitive devices which cannot run desktop apps (running "Windows RT"), and while I may be wrong, I believe that the Surface 2 is such a device.

  • Can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0

    can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0 or Iphone 4s or Ipad 2?

    You can only connect to one device at a time using Bluetooth, See article below for more information.
    http://support.apple.com/kb/ht1664
    While your iOS device can maintain multiple pairing records, it can only connect to one headset or hands-free device at a time. This prevents your iOS device from sending your data to the wrong Bluetooth accessory.

  • More than one programs using report generator at the same time

    Hi,
    I want to ask that how can I use Report Generator in two program at the same time.
    As I am using Report Generator to log my data into excel, I find that if there are two
    programs contain Report Generator, the program which ran first cannot find its
    report.What can I do apart from alway open a new report?
    Ryan

    Ryan,
    Could you elaborate on what you mean when you say that the program which ran first cannot find its report?  Are you trying to modify the same report simultaneously with these different apps?
    Regards,
    Jared Boothe
    Staff Hardware Engineer
    National Instruments

  • Can more than one ipod touch be used on the same computer

    Have a new iPod touch-4th gen.  Have  iTunes already on computer, for a 3rd gen.  Updated to lastest version of iTunes.  New iPod is not showing up at all anywhere. 

    More than one ipod on same computer is possible: http://support.apple.com/kb/HT1495
    See if this helps in getting the other recognized in itunes:http://www.apple.com/support/ipodtouch/assistant/itunes/

  • Can I configure my Bluetooth connections to use more than one wireless audio output device at the same time?

    I am trying to get my Macbook Pro (OS X 10.8.5) Bluetooth system to recognize 2 different wireless speakers at the same time. both are currently paired with mu computer and can be chosen independently and work nicely.

    Version 10.0.3 is the latest version of iMovie. iMove '11 (as in 2011) is version 9.
    iMovie saves your Projects automatically. So you can just choose to create a new Project. Your existing Projects will remain available for you to go back to whenever you like.
    You can have as many Projects as you like. You don't need ot finish one before you begin another.
    Post back if you have specific questions.
    Matt

  • How do I log into more than one email account and view at the same time?

    In the past, I could log in to hotmail.com and open and view more than one email account in firefox. I must have closed something, so now I can't do that?
    HELP???

    Hi Shasanka,
    ofcourse it's possible to control more than one instrument at a time.
    You should use the VISA routines to access all your devices. Every device get it's 'address' as 'VISA resource name'. This resource name contains information on the used bussystem and the (internal) device address (i.e. GPIB devices have an address number).
    So I suggest to read the manual and to look at the examples that come with LabView!
    And (from your question) it seems you should take the 3 or 6 hour seminar as well! (Look at www.ni.com -> academics.)
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How to control more than one instrument via different interfaces at the same time

    Hi, I am new to Labview.  I am working in a project where I have to make a Automated testing tool . So, here is the set up -  I have a Chip on a board to which there are several instruments connected namely Agilent power supply, Agilent pattern generator, oscilloscope,Dmm and Thermotron. All these instruments will be connected to the host computer via ethernet, GPIB or RS232. I have to write a program on Labview where the program  should be able to communicate with these  instruments  at  the same time  and show the ouput  on display unit . I have to run the program once, should be able to view the ouputs. So, Is it possible to write such program in Labview??.  I have  downloaded  few instuments  drivers. Is it possible to combine those intrument drivers and construct a new VI which would be able to control all this ??   Will it be easier to program this on Labview or  I should  go for Labwindows/CVI  ??.
    Please mention some useful sites or tips (if u know) for writing program.
    Thanks in advance
    shasanka

    Hi Shasanka,
    ofcourse it's possible to control more than one instrument at a time.
    You should use the VISA routines to access all your devices. Every device get it's 'address' as 'VISA resource name'. This resource name contains information on the used bussystem and the (internal) device address (i.e. GPIB devices have an address number).
    So I suggest to read the manual and to look at the examples that come with LabView!
    And (from your question) it seems you should take the 3 or 6 hour seminar as well! (Look at www.ni.com -> academics.)
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Can't connect more than one PC to my network at the same time.

    When trying to connect a second wireless laptop to my network, the one already connected gets disconnected. I'm using a WRT110 router(cable connection) that I bought 5 days ago, and two laptops with Win Vista. I don't have any PC wired connected.

    First thing which you need to do is upgrade the firmware of your Router. Go to website linksysbycisco.com/downloads... ......insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop..
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    Once you configure all the settings on your router... here are some wireless settings which you can set on your Router and i think this might make your both the wireless computers go Online...
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Here select manual configuration...Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
    Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...

  • Can more than one Ipod Nano be used on the same computer

    I want to give an Ipod Nano as a gift. The prospective recipient tells me that her daughter already uses the computer for her Ipod. Is it possible to use the same software without synchronizing both Ipods with the same songs and such?

    Yes. Point her here:
    How to use multiple iPods with one computer

  • Can more than one SAP ERP system connect to the same PI system?

    HI Experts
    Well i am new to SAP Process Integration 7.1 and i have managed to point PI system to SAP DEV ERP , but i also want to add these other 2 systems SAP QAS ERP and SAP PRD ERP Using RFC Adapter. So is it possible to integrate SAP QAS and SAP PRD  ERP into the same PI system that is pointing to SAP DEV ERP. If possible what are the configuration steps that i should follow?.
    This project implementation is based on SAP MDM 7.1/ SAP PI 7.1/ ECC EHP6.

    Hi Farai,
    Technically this is possible. But don't forget that all systems are then using the same ESR and ID. So changes on PI are also influencing ERP QAS and PRD. I don't recommend this. At least you should have 2 stages for PI: Development and QAS/PRD.
    You just need to maintain 2 connections in ERP: ESR connection and RFC connection. For using the interfaces in PI for all 3 stages you need to create 3 different configurations in Integration Builder of PI.
    Best Regards
    Harald

  • Is it possible to have more than one event/project in Imovie at the same time?

    Let me see if I can shorten this. I am working on a project for a review. It's going to take quite awhile and I'm half way through it. However, I need to work on another project, one thats short and I can dish out fairly quickly. My problem is that I cannot start it without discarding my current project. Which I cannot do because I will lose a weeks worth of data. And I cannot save it because it will combine all the clips and I would have to re-split them (half a days progress).
    So in short, is there a way to save my project as-is? Or possible create a new event and start a new project while maintaining my current work? Thank you for your help!

    Version 10.0.3 is the latest version of iMovie. iMove '11 (as in 2011) is version 9.
    iMovie saves your Projects automatically. So you can just choose to create a new Project. Your existing Projects will remain available for you to go back to whenever you like.
    You can have as many Projects as you like. You don't need ot finish one before you begin another.
    Post back if you have specific questions.
    Matt

  • Can more than one email get a copy of the form filled out

    Can more than one email get a copy of the form filled out?  Not a link but the data from the form.

    I have the copy of the form coming to my main email but I need it to go to a second email address.  right now the 2nd email address only gets a link.  I do not want them to have access to the account only to get a copy of the data.  I have them set up under Email Notifications as a "reader".

  • We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

    we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
    Appreciate your support and if possible , how to do this?

    If you want to work with Mac OS X, you need one computer per simultaneous user.
    What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
    Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

  • How can i run two firefox's so i can have both my face book acounts open at the same time without one logging in to the other

    as you can see, im trying to have two firefox windows open so i can have both my facebook accounts open at the same time on the same pc
    all i get just now is they both log in to there user but ass soon as the page refreshes one drops its user and logs into the other

    Try of of these extensions for multiple cookie sessions.
    Multifox: <br />
    http://br.mozdev.org/multifox/ <br />
    Cookie Swap extension: <br />
    https://addons.mozilla.org/firefox/3255/ <br />
    Cookie Pie extension: <br />
    http://www.nektra.com/oss/firefox/extensions/cookiepie/

Maybe you are looking for

  • Can someone from Verizon help me?

    I got my confirmation e-mail at 5am Friday (just a point of reference). When i check my status i get "not available at this time". Is there any way i can get better information. I am impatient i will admit but i need a pretty good idea when my phone

  • Call standard adobe form from a WD application

    Hi All, I have a requirement of displaying a standard adobe form from a click of a button in a WDA portal, I am an ECC developer and have no idea of WD. I created a function module which uses submit statement to invoke the driver program and displays

  • Download Error for digital edition 1.5?

    When I click install on the main page for adobe digital edition, it says connecting. Then it comes back saying download error and no further explanation. I retryed several times. I am logged in as administrator. I am currently running XP and I have a

  • Flash back table: error - ORA-08189

    Hi friends, I have a problem while doing flashback table. SQL> flashback table emp to scn 688268; flashback table emp to scn 688268 ERROR at line 1: ORA-08189: cannot flashback the table because row movement is not enabled. what should i do...?

  • Bridge error on opening

    I have recently downloaded Photoshop which I presume includes Bridge.  Photoshop opens OK but Bridge come up with an error 'The operation could not be completed' Why is this happening?