Can MSI 865PE Neo2-S can run the mem at ratio mode?

Like i mean..
I going to run the CPU at 220Mhz
but keep my ram at 200Mhz
How to set that in bios?
Thx.
I using v1.2 bios and a P4 2.4C SL6WF Costa Rica cpu.
:D

Quote
Originally posted by Domino254
Is the RAM set to 400 DDR instead of auto?
I set to 400Mhz.
Anything wrong with that?

Similar Messages

Do fan " Zalman CNPS7000A-CU" fit in a MSI " 865PE Neo2-LS" Motherboard?

Hi
I´m trying to find out if anyvony in this forum has the experience of fitting a cooling unit (Zalman CNPS7000A-CU) on a MSI 865PE Neo2-LS motherboard.
The case is a Antec Sonata 380W With 1 exhaust fan (120mm).......
Should I expect any problems.......its a big cooling unit...
Best regards
Mr Lithesteel

No, the Zalman-CNPS-7000-AlCu CPU Cooler will Fit with NO problem, and Room to Spare ....And It Will Take you More Time to Remove the "Stock" Intel HSF Unit, Then it will to Install the New Zalman 7000-AlCu ......I have this HSF on All 3 Of My Systems ..And I Happen to think that the Zalman is the Best......And yes I have tried the Thermaltake.....And still Prefer the Zalman ..But with "only" one 120mm Exaust Fan ..You should at Least Install 1 120mm or 80mm Intake Fan...............Sean REILLY875

What is the max supported CPU for MSI 865PE-NEO2-LS?

Can someone please tell me what is the max supported CPU speed for the MSI 865PE-NEO2-LS? I have a P4 2.8@800Mhz, but was told that with a BIOS upgrade this motherboard can achieve up to 3.2? Is that right, or can it support higher speeds such as the 3.4+
Thank you!

Hello,
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=433&kind=1
I think A6728IMS.210 means BIOS 2.1 so it may already work with the 3.2Ghz CPU.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=433&kind=1

I recently signed up for iTunes Match. It works well on my iPad2 but not my iPhone4S. A while ago my music did show up but it was grayed out. Now I don't see anything. I've tried everything I can think of. I'm running the latest operating system

I recently signed up for iTunes Match. It works well on my iPad2 but not my iPhone 4S. A while ago my music did show up on my phone but much of it was grayed out. Now I don't see anything on my iPhone. I've tried everything I can think of. I'm running the latest operating system and software

Try the tips in this thread: iTunes Match - 'No Music' on iPhone 4

TS4002 I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

Hi nguyen trong thang,
I apologize, I'm a bit unclear on the exact nature of your issue. If you are saying that you are having issues activating your iPhone, you may find the troubleshooting steps in the following article helpful:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Regards,
- Brenden

Can I run the emulator in -Xautotest mode with an external API?

Hello,
I am currently creating an implementation to a JSR and I want to test the implementation with the test harness.
I start the harness and then the test agent. I want to start the agent in autotest mode, using the -Xautotest switch, like this:
emulator.exe -Xautotest:http://localhost:8080/test/getNextApp.jad
This will download the test JAD and JAR and run them.
The problem is this: When running, my class path must also contain my JSR implementation (the implementation I am testing). But the JSR implementation is not part of the downloaded JAR.
Is there any way I can run the emulator in autotest mode, and have an external API in the classpath? The classpath should contain both the downloaded JAR and my JSR implementation JAR.
Any help with this would be greatly appreciated!

Hello,
I am currently creating an implementation to a JSR and I want to test the implementation with the test harness.
I start the harness and then the test agent. I want to start the agent in autotest mode, using the -Xautotest switch, like this:
emulator.exe -Xautotest:http://localhost:8080/test/getNextApp.jad
This will download the test JAD and JAR and run them.
The problem is this: When running, my class path must also contain my JSR implementation (the implementation I am testing). But the JSR implementation is not part of the downloaded JAR.
Is there any way I can run the emulator in autotest mode, and have an external API in the classpath? The classpath should contain both the downloaded JAR and my JSR implementation JAR.
Any help with this would be greatly appreciated!

Unable to detect Hyper Threading of CPU SL6WE 3.2 in MSI-865PE Neo2

Hi! I am new to this forum and need some help. I have just installed a Intel Pentium 4 3.2GHz Northwood SL6WE 478 800MHz/512k . I bought this on e-bay and understand that this cpu supports hyper threading. I have enabled hyper threading in the bios, but only see one cpu in Widows System Properties and only one cpu in Windows Task Manager. I had a 2.6 cpu installed previously, no hyper threading. My motherboard is an MSI-865PE Neo2 version 1.1, 2GB Ram ( 4x512 ?), Thermaltke TR2-430W power supply, Freezer 4 Arctic Cooler, Nvidia GeForce 6600, LG DVD RAM burner, 16x DVD ROM, WD 250 gig and an Hitachi 80 gig hard drive. I also used Arctic Silver 5 thermal paste (after using Arcticclean and Surface Purifier). Have I missed somethig? Would appreciate help in solving why I have no hyper threading.

200 7-3-3-2.5 Ultra Turbo and 212 5-3-3-2.5 Ultra Turbo is a
no boot. Thinks ultra-turbo tries to set mem timings to
2-2-2-5 below 218FSB and my memory can't do that.
Turbo boots ok. Normal setting disabled PAT.
200 2.5-3-3-7 Turbo PAT on 4.6GB/s
200 2.5-3-3-7 Normal PAT off 4.2GB/s
212 2.5-3-3-5 Turbo PAT on 4.8GB/s
212 2.5-3-3-5 Normal Pat off 4.5GB/s
Also tried 250 1:1, not prime95 stable
250 2.5-3-3-7 Ultra-turbo 6GB/s
I think pat is disabled above 218FSB on
1:1 and 5:4 setting, but not on 4:5 setting.
You should get close to or above 6GB/s at
1:1 250 3-3-3-5 bios overclocking.
Maybe something is running in the background
stealing cpu power or something?
Well, you have to test some more, maybe a
fresh windows setup will help?

Corsair XMS 3500 + MSI 865PE Neo2 = :(

I have no clue what to do now. I just upgraded my 2500+ Barton and Nforce2 board. I ordered a MSI 865PE Neo2-s , 2 sticks of Corsair XMS 3500 memory and a P4 2.4c.
However, when I install the memory, it refuses to post, but with PC2100 memory (@266 ) it posts and continues to run windows. I manually set the timings for the corsair memory, and set it to 333. Nothing.
This board has the orginial 1.0 bios and I was thinking of trying the 1.1 or 1.2. Other wise I will have to get another board, and I am tight on cash, after buying all this stuff.
Anyone????

Quote
Originally posted by JeffPH
I suggest you flash to 1.6 bios then after set memory voltage to 2.7v and memory timing by speed in bios. GL
@JeffPH, once again : the TS does not have an i875 based board, so no BIOS 1.6 for him.
@TS, you can flash to 1.3 but i doubt it would do you any good.

MSI 865PE Neo2-V and 1GB RAM stick, compatibility?

Hi all,
I've just bought a new mainboard, the MSI 865PE Neo2-V... I read that supports up to 3GB of DDR333, so now I want to buy 2 new RAM modules.
These modules has the specific:
- 184 memory pins
- 1GB RAM
- PC2700 DDR 333MHz
- 2.5 Module
- Non-ECC, Non-Parity
- CAS latency 2.5
- 128 x 64 High density
Can I mount these RAM on my motherboard? On the photo, the RAM has 16 chips of ram; it seems to be "High density" RAM.
Thanks,
Alessandro.

Romulus76, the answer is YES for the chipset; but NOT SURE for the BIOS. I must ask MSI.

MSI 865PE Neo2 motherboard drivers...

Hi, I inherited an old MSI 865PE Neo2 mobo from a friend a while ago, and recently my Gigabyte board developed some bad caps and became too unstable. So I've installed my P4 CPU and some other older components on this MSI board, but I have no driver CD.
Windows seems to have installed most of the drivers, but I'm missing the audio drivers. HWiNFO32 reports the audio adaptor as an Intel 82801EB(M) ICH5(-M) - AC'97 Audio Controller / AC'97 Codec: C-Media CMI9739(A).
I don't see these drivers available on the MSI site for this older board. Any suggestions where I can get the appropriate drivers?
Cheers!
EDIT: No worries; I found the download - C-Media CMI9739A/9761 Software Audio Drivers. Couldn't see for looking - http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=543

Try this. It worked for me in the past.....
http://www.realtek.com.tw/Downloads/downloadsCheck.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownTypeID=3&GetDown=false

My "MSI 865PE Neo2-PFS Platinum" Is not working

I have an MSI 865PE Neo2-PFS Platinum and it has stopped working properly, I'm fairly sure that the problem is coming from the motherboard however I would like another person opinion.
Basically everytime i try to play a game it works for about 5 seconds then comes up with a bluse screen telling me to check Windows has needed to shut down because there has been an error and that it could be caused by drivers or that I need to disable BIOS caching and shadowing
So far I have tried disableing BIOS caching and shadowing. Changing the RAM around and using different modules. I have formatted the Hard Drive. Tried using a different graphics card. Reinstalled the BIOS. Uninstalled all the drivers and tried different ones.
None of this has made any difference.

Since you already have reformated/made a fresh OS install, here´s some things you can try…….
- Set dram voltage to 2.7v in bios
- Use Driver Cleaner when uninstalling VGA drivers
http://www.majorgeeks.com/download3214.html
- Install latest IntelInf driver
http://downloadfinder.intel.com/scripts-df/Product_Filter.asp?ProductID=816
- DirectX
http://www.microsoft.com/downloads/details.aspx?FamilyId=0A9B6820-BFBB-4799-9908-D418CDEAC197&displaylang=en
- Install Nvidia VGA drivers
If that don´t help……………
- Try another VGA card
- List 3,3v+12v amps on PSU

[Other 865 Series] MSI 865PE Neo2-V and Dual Channel Mode Question

Hello, I have a quick question regarding dual channel mode with my current motherboard. I have an MSI 865PE Neo2-V and am wondering if it is possible to enable dual channel mode while having three RAM modules inserted in the motherboard.
For example, I currently have one 512MB PC3200 module in my computer. If I purchase another 512MB module and run them in dual channel mode, will it be possible to buy a 1GB module or another size module, and still have all three slots run in dual channel mode? Or is dual channel only operational on this motherboard if only two of the three slots are occupied?
Thanks.

Dual channel requires an even number of sticks.

MSI 865PE NEO2-V booting problems [Solved]

Hi. I've been building a new computer and am seeing some weird stuff.
System Specs:
-P4 3 GHz Socket 478
-MSI 865PE NEO2-V -V22 http://www.saveateagle.com/865pe-ne...EO2-V&ovtac=CMP
-128mb ATI Radeon 9800 pro
-120 GB Western Digital
-1GB dual channel DDR400 PC3200 Corsair
-Ultra 500w X-Connect:
http://www.absoluteinsight.net/2456
-DRW 1108IM ¡V DVD+/-RW Drive
http://www.btc.com.tw/english/2-2-dvd_rw.htm
-Generic Floppy Drive (sentimental reasons )
The system seems to be running (ie no post beeps) but I'm not getting any signal sent to the monitor. I've tried running it out of the case with only the video card connected to the mobo, cleared cmos via battery and jumper settings, and the same thing still happens.
Anyway, I've been talking with other guys on another forum too, but we haven't gtten it to work.
http://www.techsupportforum.com/showthread.php?t=53044
I'm going to try clearing the cmos again because apparently the battery must be out for several minutes, whereas I roughly did one minute. If the mobo has no ram connected, there should be post beeps, right? If so, I better check the case speaker connection again.
Thanks for the help.

I tried removing my RAM and powering -suprisingly no beeps . So make sure its not a faulty RAM, try another one

MSI 865PE NEO2-V showing wrong RAM timings

Hi
I have a MSI 865PE NEO2-V motherboard with Corsair TWINX2048-3200C2 DDR-DIMM 2048MB Kit w/two matched CMX1024-3200C2 DIMMs now and try to put the timings of the RAM to 2-3-3-6 in the bios.
According to http://www.corsairmemory.com/corsair...h_results.html it should work ok...but its not.
When i check the timings with CPU-Z it shows 3-4-4-8 instead.
The SPD is 3-3-3-8.
I have checked so they are in Dual channel and i have put the RAM voltage to 2.75V after i tried with the default voltage, but to no avail.
To be extra certain i ran Everest Ultimate and it showed the exact timings.
The RAM run fine with StressPrime and Prime95 but i get bad results in SiSoft Sandras RAM benchmarks.
What is going on????

Hi
Yeah, it get slow results.
I have a Intel Prescott 3.2Ghz with FSB800.
I see now that the link uses Java script, its in Corsairs search engine on their site.
Their recomendations for the set of RAM i have is: TWINX2048-3200C2 / DDR-400 (XMS-3200C2) / 2-3-3-6 .
I have tried to set the timings as you said but it still runs at 3-4-4-8 whatever i set it at.
I have it running at 2-3-3-6 on another motherboard so i think it must be some settings in the BIOS that i set wrong on this one, but i cant figure it out.
Could it be that somethings wrong with the Performance Mode (MAT) settings?
I tried it on and off, I have also reseted the BIOS to default and even removed the CMOS battery for a while.
I paste all the info from the Corsair site here:
Facts about the TWINX2048-3200C2
The TWINX2048-3200C2 is a pair of 1024 MByte DDR SDRAM DIMMs designed for extreme speed are some of the fastest 1 GByte modules available. TWINX matched memory pairs are specifically designed for motherboards using chipsets with dual memory channels. This part delivers outstanding performance at high clock speeds. It has been tested extensively in a variety of motherboards commonly used in gaming rigs. This memory has been verified to operate at 200 MHz (DDR400) at aggressive latencies of 2-3-3-6. This module is also available as a single module. This module is available as a single module or a pair of dual-channel tested modules, in both black and platinum heat spreaders.
Facts about this Chipset
The 865PE chipset is a great choice for users who require a complete range of support for the Pentium 4 processor, with high-bandwidth DDR memory and discrete graphics cards. Engineered to optimize Dual-Channel DDR SDRAM memory performance, the 865PE chipset features an 800-MHz system bus, support for the latest AGP8X graphics cards, and high-bandwidth DDR400/333/266 SDRAM memory technology.
Facts about this Motherboard
This 865PE Neo2-V MSI board is flexible and highly scalable solution that meets a broad range of demanding computing needs. The 865PE chipset offers high-bandwidth interfaces such as dual-channel DDR 400 main memory, coupled with an 800 MHz system bus, AGP8X graphics interface, dual independent Serial ATA ports and Hi-Speed USB 2.0 connectivity to ensure the performance you expect.
http://www.corsairmemory.com/corsair/products/specs/twinx2048-3200c2.pdf

ATA HD for MSI 865PE Neo2-PS

I have this MB: MSI 865PE Neo2-PS (MS-6728 v2.0) and now I have both S-ATA full: one place HD and second place DVD burner.
I ordered now a new HD S-ATA and find out, that I have only this 2 ports for S-ATA
What would you recommend me - send back this new HD or exist any possibility how to connect this HD. I think this is a stupid question sorry.
I mean which HD would you recommend me if I can not use SATA HD?
Thank you

http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=528 this your board?
it supports 4 ata devices and 2 sata devices
look here https://forum-en.msi.com/index.php?topic=25959.0

Can MSI 865PE Neo2-S can run the mem at ratio mode?

Similar Messages

Maybe you are looking for