Can multiple ringtones be set within one contact entry?

I'm in the process of updating contacts on my iPhone 4, and am assigning specific ringtones to a few people. I noticed, however, that you can only list one ringtone per contact entry--even though many of my entries have multiple people with different phone numbers (ie: a husband, wife, and kid). I even had to separate my mom and dad in my address book in order to give them each their own ringtone; but I can't list their home phone number in both contact entries, or it just plays the default tone. Is there a way to get around this without having to separate all the "couples?"

I am going to answer my own question here, I have just found out that by going into the gallery and picking a mp3 that I could "use the tone" as a contact ringtone! - Happy Days!

Similar Messages

  • Regarding receiving texts as emails:  Can you apply this setting to one individual? I want to continue to receive texts from everyone else except one person!

    Regarding receiving texts as emails:  Can you apply this setting to one individual? I want to continue to receive texts from everyone else except one person!

    Don't want to block the person, just have all his texts going directly to my email so that I can maintain a continuous record of his text contacts (rather than remain in text form).
    It appears that I must select an option that makes ALL texts go to email, which I'd prefer not doing.

  • Control multiple updates and queries within one transaction in JPA

    Hi,
    I have a question regarding control multiple updates and queries within one transaction. We are using EclipseLink 2.3.1. With below code, will I be able to:
    - have all insert, update, select queries committed in one transaction;
    - queryGetBalance will return the latest OrgBalance after update;
    - if one fails, everything rolls back.
    Thanks!
    Jeffrey
    PS: I realized that I cannot use em.getTransaction().begin() and em.getTransaction().commit(), since I am using JTA.
    =============
    @PersistenceContext(unitName="Test")
    EntityManager em;
    em.setFlushMode(FlushModeType.COMMIT);
    newTransaction.setAmount(1000);
    newTransaction.setType("check");
    em.persist(newTransaction);
    orgAudit.setUpdateUser("Joe")
    orgAudit.setupUpdateTime(time);
    em.merge(orgAudit);
    Query queryUpdateBalance = em.createQuery("update OrgBalance o set o.balance = o.balance + :amount where orgId = :myOrgId");
    queryUpdateBalance.setParameter("amount", 1000);
    queryUpdateBalance.setParameter("myOrgId", 1234);
    Query queryGetBalance = em.createQuery("select OrgBalance o where o.orgId = :myOrgId");
    queryGetBalance.setHint("javax.persistence.cache.storeMode", CacheStoreMode.REFRESH);
    queryGetBalance.setHint("javax.persistence.cache.retrieveMode", CacheRetrieveMode.BYPASS);
    queryGetBalance.getResultList();
    em.flush();
    Edited by: JeffreyW on Dec 12, 2011 10:34 AM

    Yes, the operation will be in a single transaction, assuming you are using a JTA managed SessionBean and the code is part of a SessionBean method.

  • How can I change the setting to one appropriate to java1.2

    Hello.
    I am using WebLogic 4.5.1 .
    and recently started to use JDK 1.2 instead of JDK 1.1.7.
    So, I set [start]-[weblogic]-[Choose1.2JRE] in environment.
    and then, if I execute T3Server, the message of
    "javai.dll class path cannot be found " is displayed and the server is not
    loaded.
    However, javai.dll was in java1.1.X\bin.
    I can assume that a setting is to java1.1.X.
    --> How can I change the setting to one appropriate to java 1.2
    It's my environment
    ClassPath
    .;c:\weblogic\classes;C:\weblogic\lib\weblogicaux.jar;C:\weblogic\license;c:
    \weblogic;C:\weblogic\myserver\clientclasses;C:\weblogic\myserver\serverclas
    ses;C:\weblogic\myserver\servletclasses;C:\weblogic\mssqlserver4\classes;c:\
    weblogic\classes\boot;C:\weblogic\eval\cloudscape\lib\cloudscape.jar;c:\rmi-
    iiop\lib\iioprt11.jar;c:\rmi-iiop\lib\iioprt.jar;c:\rmi-iiop\lib\rmiorb.jar;
    C:\jsdk2.1\runner.jar;C:\jsdk2.1\servlet.jar
    Path :
    %SystemRoot%\system32;C:\jdk1.3bin;c:\weblogic;c:\weblogic\bin;
    c:\;c:\bat;c:\util\;C:\jsdk2.0\bin
    Hyung Gi Min

  • Can a pdf be added within a contact profile in contacts

    Can a pdf be added within a contact profile in CONTACTS

    Thanks for the reply. I understand my wording was misleading.
    What we are doing is taking a single page base PDF file, containing 10 elements for example, and using our own software (with help from iText) adding other page elements on the same page. Most of the time these elements are just text, or the odd image, but sometimes, we may be placing a PDF Logo on the same page. The resulting PDF seems to be a single page, containing 10+  elements of equal hierarchy, with no reference to the source PDF file that was used for the logo. Also looking at the Layers panel, There is no information here.
    Are you saying then that there may be references to some of the elements based on the source PDF file?
    Cheers

  • Iphone6 why can't I save more than one contact?

    iphone 6 why can't i save more than one contact?

    Hi Diovani
    Two different processes can have different task initiators...task initiator means creation of a process instance which can happen only once

  • On the IPhone 5, is it possible to set up a Contact entry for a group of people?

    On the IPhone 5, is it possible to set up a Contact entry for a group of people, and, if so, how?

    "groups"
    true... there are many basic functions in which apple loves to stay 10 years behind competitiors by design. my 2001 nokia could do that.

  • Setting up one contact with multiple email addresses-i.e Family & Friends

    Would like to setup one contact " Family & Friends " and show multiple email addresses - such as 20 or 30 addresses - can this be done >??

    I the Ipad contact app does not handle groups. However, there are apps such as Mail2Group. They have both free (lite) and more fully featured version.

  • How can I copy some info from one contact to another?

    If I have, for example, 4 people who live in the same address, how can I get all the address fields from one contact and copy to the others?
    Tks

    You can duplicate an address card by copying and pasting.
    Select an address card in the Address Book window.
    Choose Edit > Copy, then choose Edit > Paste.
    Then edit the names and other details or set up the 4 cards and copy and paste each field as required
    chris

  • Can Multiple Webgate/OAM/IdentityStores access one multitenant WLS domain?

    Can multiple access points ( web tier + OAM + Identity store) access one application?
    The objective here is to have one multi-tenant ADF application accessed by users who are authenthicated by their own enterprise sso and identity store. Authenthicated session should pass the context with list of all enterprise roles that user belongs to which would be used for authorization by the multitenant application. It is assumed here that naming convention for relevant roles is followed by all participating identity stores.
    Can Webgate/OAM and accessed WebLogic domain be configured to accomplish this?

    OAM can pass as header variables all of the things you mention. For example, you get these by default:
    OAM_REMOTE_USER containing the userid of the logged in user (eg "jsmith")
    HTTP_OAM_IDENTITY_DOMAIN containing the name of the Identity Store that the logged in user belongs to, as known to the OAM admin console (eg "SunLDAP")
    additionally you can define a headervar that contains the user's ldap group membership, and one that contains the user's full DN (or any other attribute and other information).
    Of course, any receiving app would need to be configured to consume this information.
    Regards,
    Colin

  • How to use multiple Spry Data Sets in one page

    I'm using two spry data sets in one page. When I add the first spry data set to my page everything runs OK, When I add the second spry data set to the page the first data set stops working. Does anyone know what the problem is?
    This is how I have my data sets listed.
    var ds1 = new Spry.Data.HTMLDataSet("/accounts/tower/list.php", "list");
    var ds2 = new Spry.Data.HTMLDataSet("/accounts/tower/numvisits.php", "chart");
    Thanks, let me know if you need more information.

    Good News!
    There is nothing wrong with what you have shown.
    Bad news!
    The problem could be in that part that you have not shown.
    Gramps

  • Can multiple orgs be setup for one account?

    Hi,
    Is it possible to have multiple organizations setup for the one account? This is in a sales/campaigns context.
    Thanks.

    If you are referring to linking a customer account to multiple parties I don't think it is possible.

  • Can multiple tabs be opened in one analysis in OBIEE 11g

    Hyy All, I am not able to open mltiple tabs in one analysis in obiee, Before It, I was using SAP BO, It was possible in there, Please help me out. .

    Hii ChristianBerg,  Thanks for replying..
    First Point by you (- Multiple views inside a view selector within any given analysis), I am adding some more to it that I need "- Multiple views inside a view selector within any given analysis in tabs" :: How can I achieve It? Can you tell provide me any sample report which have multiple sub reports or views? please.. Thanks a lot In Advance.

  • Multiple MobileMe accounts – Set the one used for publishing Photos & Video

    I'm running OS 3.0 on an iPhone 3G S. I've configured two MobileMe accounts, both Mail only (no Calendar, no Contacts). MobileMe account 1 is also the default email account as of Settings.
    However: When I use one of the sharing features in the Photos app, it wants to publish to Galleries of MobileMe account 2 (though, as stated above, account 1 is set to be the default email account).
    Any idea how to change this?
    In the list of configured email accounts MobileMe account 2 is listed below MobileMe account 1. However, alphatically MobileMe account 2 ranges before MobileMe account 1. Is Photos simply picking the first MobileMe account it finds in alphabetical order?
    Any help is greatly appreciated!
    -Ralf

    Macworld has a workaround for this that seems to work ok:
    http://tr.im/MMAccount
    On getting the deleted mail accounts to sync back from iTunes, I had to de-select them first, and then re-select to get them to show up afterwards, but at least I can upload to the correct account now.

  • Can I create a Search within one topic?

    Here is my challenge:
    (1) Building WebHelp for a web-based data application in 8.0.2.208 (I also have one member working on 5.0.1)
    (2) The web-based data application has 1530 data definitions
    (3) The Product Manager would like the ability to perform a search for a data defintion by allowing the user to enter text and then initiating a search specific to the list of data definitions and not including the entire application help (i.e., a search on one topic or a collection of topics)
    Not sure if this is possible. I would like to:
    (1) Have one primary topic with the name of every data definition in the application (again 1530 of them)
    (2) Have an entry field where the user types part of the data definition name and allow them to click a button to initiate the search
    (3) Put the user at the first item that matches their search
    (4) Each item would be a hyperlink to the actual data definition - OR - have all data definitions on one page (YIKES)
    --- OR ---
    (1) Have a collection of topics with data defintions
    (2) Allow the user to enter search criteria and limit the results to the collection of topics related to the data definitions
    Is there an "in topic search control" or a search control that can be limited to one topic or a collection of topics?
    I have looked at setting up a form with a form field/text field and command button but I cannot find any substantive documentation on how this works or what I need to get it to work.
    Any suggestions?  As always, thanks for any input.
    Michael F Weart

    Two last things:
    (1) In the Skins setup, I had to add the "Search.html" in the skin to the "ZoomSearch" button using Links and not Advanced. Having it in Advanced did not open the Search form in my help. When I clicked the ZoomSearch menu bar item, it just flashed and did not open the ZoomSearch search topic.
    (2) I got the search processing to work in my project, but at some point it stops working. The search topic displays when I click ZoomSearch and results are shown but when I click the link to go to the page listed in the results, I get the standard "Internet Explorer cannot display the web page".
    When I look at the link it has:
    file:///C:/Research/SearchProcessing/!SSL!/HPI_Change_Metrics.htm
    It should have:
    file:///C:/Research/SearchProcessing/!SSL!/WebHelp/HPI_Change_Metrics.htm
    All I did was re-compile the WebHelp, re-publish the WebHelp, regenerate the search index and repost the 5 Search related files into my WebHelp folder (in the search_files folder). Any idea why it would not have the "WebHelp" included in the path?
    As always, thanks --
    Michael F Weart

Maybe you are looking for