Can multiple RRI jump targets co-exist in Web Appl.

Hi,
I have a Web Appl. with multiple jump targets.  When jump to first target, system create a new window for the target report.  When I go back to the main report to jump to 2nd jump target.  System reuses the same sub report window to display the 2nd jump target report.  It means I can have only one target report open.  Is there way to work around the problem to have multiple jump target reports open at the same time?
Thanks,
Frank

Hi Frank,
You could do a CTRL+N on your sender report for it to open up in a new window, and then do the second RRI jump from here..but this way you will have one extra window for each target report displayed. Does this hapen even if you ALT-TAB back to the sender report?

Similar Messages

  • BW RRI JUMP TARGETS

    I have to work on some SAP BW security stuff like authorizations at infoobject level and other related stuff (ex: RRI jump targets to specific TCODE in R3 - should not have access to other TCODES from the tcode which you are in R3). I am not sure what else I need to do and this is a Brand New implementation. So if anybody has worked on the BW security, can you please provide me with any documentation you have.
    Any documentation/presentations or any guidance/links in this regard will be very helpful to me.
    Thanks in advance for your help
    MAHI

    hi Mahi,
    check
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/659fa0a2-0a01-0010-b39c-8f92b19fbfea
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/39f29890-0201-0010-1197-f0ed3a0d279f
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/adeac294-0501-0010-5a97-9ac5d562b1be
    RRI
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6eb89190-0201-0010-89bf-ad46d1503ef9
    hope this helps.

  • Query in RRI / Jump Targets

    Hello Gurus,
    I am querying on the FI-Ageing Analysis. The report is from an infocube. I have created a jump target, which in turn goes an ODS Query. In an ageing report, I have a total Overdue Balance (OB),OB between 0-30 days, OB between 30-60 and 60-90 days. The report is displayed on the customers. When I right click the value in one of the customers 60-90 days column (for eg.) , the jump target takes me to the ODS report but it shows me the line item documents for the total balance of the customer, while I am interested in seeing the documents of only overdue between 60-90 days.
    Has anyone encountered this situation. Pls guide.
    Thanks in advance

    Hi bw,
       You can pass parameters in RRI.
    Use the URl for furthur details .
    http://help.sap.com/saphelp_nw04/helpdata/en/99/08629bd3e41d418530c6849df303c9/frameset.htm
    Taru Gupta

  • RRI Jump Target:  where-used

    Hi,
    I have a query that is used by a lot of other queries as a jump target. Is there a shortcut way to find out which other queries are senders to this one? Or do I have to check one by one?
    Thanks in advance,
    Fran

    hi Fran,
    try tables
    RSBBSQUERY
    RSBBSQRYMAPPING
    RSBBSQUERYDIR
    rsbbs* tables
    RSBBS_RSRR_URL URL for Transaction RSRR in the Source Sys
    RSBBSCUBE BW: InfoCube Receiver
    RSBBSCUBEDIR BW: Directory of the InfoCube Sender
    RSBBSCUBEMAPPING Fixed Mapping for BW-R/RI
    RSBBSCUBET BW: Texts for InfoCube Receiver
    RSBBSIX BW: Cluster Table Info. System
    RSBBSQRYMAPPING Fixed Mapping for BW-R/RI
    RSBBSQUERY BW: Query Receiver
    RSBBSQUERYDIR BW: Directory of the Query Sender
    RSBBSQUERYT BW: Texts for Query Receiver 
    Re: list of rsbbs queries ?
    hope this helps.

  • RRI - Jump Target

    Hi ALL,
    I have a requirement where i have to Create a RRI in bex Reporting, How can i introduce RRI interface for one query to another. Is BI 7.0 supports RRI ? if so How it will process and works ,What are the settings lieing in sender and Receiver and Assgnment Details. Does Query1 and Query2 has atleast one info object common? what if not.
    It would be great if anyone answer
    Thanks
    Dolly.

    Hi dolly,
    For example, Suppose you created two cube CUBE A ( which contains Company code , Customer, Revenue) and  Cube B (Controlling Area, Region, Price) . so There is no common column.
    On cube A you created query QUERYA
    On cube B you created query QUERYB
    GOTO>>> RSBBS,
    sender>>>CUBEA/QUERYA
    REPORT TYPE>>>>BW Bex query
    Target>>>> Local
    receiver report>>> CUBEB/QUERYB
    save it.
    after you run the query in analyzer
    Right click on the repor>>>> goto >>>> QUERYB. it will jump.
    But Unlike the other it will just jump from QUERY A TO QUERY B. But its not jumping into the query w.r.to particular charecteristic.I mean for the respective region you can't find the detail information like product, and billing document, customer.For these thing threre should be common charecteristic.
    Regards,
    Ranganath

  • RRI Jump Target Issue, IMP

    How do I jump from one query to another with a set of values. I want a query to run for a set of all customers for a specific customer group from 0cust_sales.
    I tried both options using InfoObject and Variable and different options in selection type(Parameters, Single values...)
    with a specific customer record, it runs fine, if I right click go-to from customer or customer group header, it returns all customers from all groups. How do I restrict this?

    I want an aging query by customer group.
    I have aging query by customer(0DEBITOR)
    I have customers by customer group in 0CUST_SALES.
    So I chose to jump by customer group to that aging query by passing the Customer numbers for the specific group chosen.
    I am half successful. I can get results on a customer by customer basis by right clicking on a specific customer.
    If i right click on group and choose go to, it is resulting in a single record for that customer in that line.
    if i right click either on customer group or customer in the header line, it is resulting in all customers which i dont want.

  • Urgent !!RRI(Jump target )!!

    When I am jumping from one Query to another Query,
    For Example
    Avg Score----
    No of Response
    <2.0----
    3
    >2 and <3 -
    5
    >3----
    5
    So when I click <2 in my MAIN report ,is it necessary that I have to pass that <2 parameter in a Variable Screen of my supporting report or without passing that parameters,Can I view my data  of the reponses name in detail in the range <2.0 in my supporting i.e detailed report ?????????One more thing is ,it is a KEY FIGURE where i cannot use in varible screen.U need a characteristic for that .
    Any ideas are highly appreaciable & Quite Urgent too.
    Thnx a

    I think rather than drilling down from <2.0 you have to drill down on the value 3.
    When you go to the detail report you can see the details of these 3 records and those records will be having the average score less than 2.0 (that is the reson why they are getting counted in your main query as <2.0)..

  • Jump target RRI from BW report to CRM Portal

    Hello Experts,
    Need to create a Jump target from the BW query to CRM Portal Tcode CRMD_ORDER.
    I am passing the transaction number ( similar to sales order in R/3) to this tcode CRMD_ORDER in CRM
    Step1) create the receiver
    Type: Transaction. Defined the source system and entered the Tcode CRMD_ORDER in the 'report' field.
    Receiver is created
    Assignment. details:
    I can see the source infobject 0CRM_OBJ_ID from the Infobject column; Type : Infobject; Field name : OBJECT_ID / GV_OBJECT_ID;
    OBJECT_ID is the table field in the CRM System for the transaction number.
    GV_OBJECT_ID is the screen field name in the CRM system for TCODE CRMD_ORDER.
    I tried with both the OBJECT_ID and GV_OBJECT_ID.
    Expected result: Open the Tcode CRMD_ORDER with the transaction number eg: 1000001 that is passed from the Bex report. Currently that is not happening. It is opening Tcode CRMD_ORDER but not the document 1000001. I have to manually open it.
    Please suggest if anything got missed in the definetion of RSBBS.
    Regards,
    BWer

    Hi,
    What I found out so far is that by using a URL like
    http://...:8060/sap/bc/gui/sap/its/BBP_POC_DISPLY?sap-client=300&sap-language=EN&PO_GUID=490622657B526483E10000000A0A3D25
    in RRI it is possible to jump from a BW web report to SRM to display a corresponding purchase order. This URL uses the PO_GUID, but with help of a couple of lines of ABAP in a custom BSP I was able to use the PO number instead of the GUID, too.
    In general I  am looking for URL's do display purchase oders, shopping carts and confirmations in SRM and URL parameters that can be used. Or anything related to that topic.
    From my experience users find it very useful to easily jump from BW into the original transactions to clarify potential issues there. I have implemented this a lot in the past with BW and classic R/3 GUI transactions, so I'm looking for a way to implement this with SRM as well.
    Best regards,
    Rudolf

  • How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

    How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

    Try this general troubleshooting procedure:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
    3 - reboot, launch iPhoto and try again.
    NOTE: For Mavericks and Yosemite,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    where you can check the Show Library Folder checkbox.

  • HT202213 Can multiple iPhones share one iTunes without syncing the phones together? We just got new iPhones and set up desperate apple id's, but don't know if we can both sync to our existing iTunes without linking our phones together (contacts, apps, etc

    Can multiple iPhones share one iTunes without syncing the phones together? We just got new iPhones and set up seperate apple id's, but don't know if we can both sync to our existing iTunes without linking our phones together (contacts, apps, etc) ????

    How to use multiple iPods, iPads, or iPhones with one computer

  • Using table comparison transform can you point to multiple tables as target

    Using table comparison transform can you point to multiple tables as target tables?
    Thank you very much for the helpful info.

    If you want to feed the output to multiple tables, you can do so, but you have to be cautious enough on which table to be used as a comparison table in this case. The comparison table provided inside Table Comparison will be compared against the input data set for generating opcodes (Insert / Update / Delete) to input rows.

  • In RRI, how to locate the Jump Target  for a Query

    Hi all,
       I want to find the Jump Targets for a particular Query. How can I find it in which table, PLEASE ?
    Thanks.

    Hi Venkat Kodi,
    If you want to use Jump Targets with R-R-I you have to explicitly create them using T.Code: RSBBS. Then select the Source Query /Source system / Target Report.
    If you want to locate the Target Query already created for a particular query. In BEx Report, Right-Click and use Go to  --> Target Query.
    Hope this Helps,
    Cheers,
    Raj

  • Can I add multiple linked documents to an existing project?

    Can I add multiple linked documents to an existing project without breaking the project?
    The project I'm working on is due to go live in just a little over a month. I've recently acquired some training materials that contain information that needs to be merged into the help file. The problem is that there is not enough time to do it, get it reviewed, and so on.
    So I had this idea of linking to the Word docs (there are 3) for now, then cleaning things up as we go along.
    Is that a stupid idea this late in the game?
    Would it be better to create a separate help file with just those docs and then merge the projects into a master project?
    I am using RoboHelp 9 and Word 2010.

    I don't think the idea in itself is silly but I think there might be a nicer solution.
    Link the documents to a new project. How is described on my site. Alternatively import them.
    Once you have got the topics looking how you want, then import them into your main project. You then have the topics ready to edit later on but for now they can go as they are.
    Backup your main project before you start the import so that you can backtrack if you want to.
    The TOC will not come in automatically this way but you'll likely want to add the new stuff manually anyway. Alternatively you can import the TOC and then append it.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Report-to-Report Interface, Jump Target

    Dear Friends,
    Can anybody help me to Understand ,how to use RRI Interface and the Scenario of Jump Target ?
    I will be thankful , If I am Explained with a Small Example , So that I can follow the Procedures
    Thanks

    H I Ramesh,
       see best example..  genrate one query on master data...  and  another query  on transactiona data..( but make sure that... your transactional query should contain atleast one field  that exist in first query)
          for  example.. generate one Query on Employee master data...(that contan- EMPNO , ENAME , ADDRESS) 
         nad generate  second Query   on Employee transactional data ..( that contain..
    EMPNO , SAL, BONUS , INCENTIVES , LEAVES ) like this..
    now  go to RSBBS tcode... and give the first query name.. and in  the down give the second query name..save it..
        now go to BEX and execute your first query..  and  in that select any EMPLOYEE NUMBER and  right click it--> and  select second query name.. ..
    now you can able to see  that particular employee details only..
    regards
    @jay

  • Jump Targets

    Hi Frens
    Can any one help me the Jump target sample code in cmod
    Rgds

    Hi Ashish,
    RSBBS is a transaction code through which you can configure the RRI i.e taget and source will be give.
    What I am lookinng is for eg. In a Sales report if you double click on , it will have to give you a full details.
    Rgds,

Maybe you are looking for